Planet WGS-814HP User guide

1. Package Contents

Thank you for purchasing PLANET 8-port 10/100/1000T Wall­mounted Gigabit Ethernet Switch. The table below shows the
models with the number of ports:

Model Name

10/100/1000T
Copper Ports

WGS-814HP 8 4 DC 54V, 1.33A

WGS-818HP 8 8 DC 54V, 2.4A

In the following section, unless specied, the term “Wall-mount
Gigabit Switch” mentioned in this user’s manual refers to the

above models.

Open the box of the Wall-mount Gigabit Switch and carefully
unpack it. The box should contain the following items:

The Wall-mount Gigabit Switch x 1 User’s Manual x 1

802.3at PoE+
Ports

Power Adapter

 WGS-814HP Front View

PoE+

PoE Usage

60W

45W

30W

15W

PWR

Industrial 8-Port Gigabit

Standard

Ethernet Switch with 4-Port PoE+

VLAN

Extend

DC Input Range

48-56V

, 1.5A max.

Figure 2-1: WGS-814HP

 WGS-818HP Front View

PoE+

PoE Usage

120W

90W

60W

30W

PWR

Industrial 8-Port Gigabit

Standard

802.3at PoE+ Ethernet Switch

VLAN

Extend

DC Input Range

, 3A max.

48-56V

Figure 2-2: WGS-818HP

WGS-814HP

WGS-818HP

3 421

PoE-in-Use

PoE+ Magnet Mounting

Uplink

7 865

3 421

PoE-in-Use

PoE+ Magnet Mounting

PoE-in-Use

Uplink

7 865

Blinks

45 Amber

ACTLNK

Lights

Blinks

60 Amber

Lights

ACTLNK

 PoE Power Usage of WGS-818HP (Unit: Watt)

To indicate the PoE usage is around 38W
to 44W.

To indicate the PoE usage is over 45-watt
PoE power budget.

To indicate the PoE usage is around 53W
to 59W.

To indicate the PoE usage is at the
maximum.

LED Color Function

O

30 Amber

Blinks

Lights

ACTLNK

Blinks

60 Amber

Lights

Blinks

ACTLNK

90 Amber

Lights

Blinks

120 Amber

Lights

To indicate the PoE usage is less than
14W.

To indicate the PoE usage is around 15W
to 29W.

To indicate the PoE usage is over 30-watt
PoE power budget.

To indicate the PoE usage is around 45W
to 59W.

To indicate the PoE usage is over 60-watt
PoE power budget.

To indicate the PoE usage is around 75W
to 89W.

To indicate the PoE usage is over 90-watt
PoE power budget.

To indicate the PoE usage is around 105W
to 119W.

To indicate the PoE usage is at the
maximum.

2.5 Physical Dimensions

W x D x H: 148 x 24.2 x 134 mm

118.00

148.00

133.00

PoE+

PoE Usage

60W

45W

30W

15W

Standard

Extend

VLAN

PWR

Industrial 8-Port Gigabit
Ethernet Switch with 4-Port PoE+

WGS-814HP

DC Input Range

, 1.5A max.

48-56V

PoE+ Magnet Mounting

134.00

118.00

24.20

3 421

ACTLNK

PoE-in-Use

6.00

ACTLNK

Uplink

7 865

- 1 -

Wall-mounted Kit x 1 Magnet Kit x 1 RJ45 Dust Cap x 8

Power Adapter x 1 Power Cord x 1 DIN-rail Kit x 1

If any item is found missing or damaged, please contact your local
reseller for replacement.

2. Hardware Description

2.1 Switch Front View

The front panel of the Wall-mount Gigabit Switch consists of 8
Auto-Sensing 10/100/1000Mbps Ethernet RJ45 Ports. The LED
Indicators are also located on the RJ45 ports of the Wall-mount
Gigabit Switch.

- 3 -

2.2 LED Indicators

 System and Ports

LED Color Function

PWR Green Lights to indicate that the Switch has power.

Lights

LNK/
ACT

PoE-in­Use

Green

Blinks

Lights

Amber

O

 PoE Power Usage of WGS-814HP (Unit: Watt)

LED Color Function

O To indicate the PoE usage is less than 7W.

15 Amber

30 Amber

Blinks

Lights

Blinks

Lights

To indicate the link through that port is
successfully established.

To indicate that the switch is actively
sending or receiving data over that
port.

To indicate the port is providing DC
in-line power.

To indicate the connected device is not
a PoE powered device (PD).

To indicate the PoE usage is around 8W
to 14W.

To indicate the PoE usage is over 15-watt
PoE power budget.

To indicate the PoE usage is around 23W
to 29W.

To indicate the PoE usage is over 30-watt
PoE power budget.

- 5 -

2.4 DIP Switch

The front panel of Wall-mount Gigabit Switch provides one DIP
switch for Standard, VLAN and Extend mode selections. The
detailed descriptions are shown in the following table.

DIP Switch Mode Function

Standard

VLAN

Extend

Standard

VLAN

Extend

Standard

VLAN

Extend

Note

Please reboot the Wall-mount Gigabit Switch after
adjusting the DIP switch.

This mode makes the Wall-mount Gigabit
Switch operate as a general switch and all
ports operate at 10/100/1000Mbps auto­negotiation.

This mode makes the Wall-mount Gigabit
Switch operate as a VLAN isolation switch
and

1. Port 1 to port 6 will isolate respectively.

2. Port 1 to port 6 can only communicate
with port 7 and port 8 (uplink port).

This mode makes the Wall-mount Gigabit
Switch operate as a VLAN isolation switch and

1. Port 1 to port 6 will isolate respectively.

2. Port 1 to port 6 can only communicate
with port 7 and port 8 (uplink port).

3. 22~25-watt PoE transmit distance of 250m
at speed of 10Mbps.

- 7 -

3. Installation

3.1 Wall-mount Installation

To install the Wall-mount Gigabit Switch on the wall, simply follow
the following steps:

Step 1: Place the Wall-mount Gigabit Switch on the wall and

mark the four holes with a pencil.

Ø4mm

Ø8mm

6mm

133mm

Step 2-1: Hammer the anchors provided into the four holes and

use the four screws to tightly x the switch onto the

wall by screwing them.

PoE+

1

2

PWR

DC Input Range

3

4

AC

TLNK

PoE-in-U

se

I

n

d

u

s

t

r

i

a

l

8

-

P

o

r

t

Gig

a

E

b

t

h

i

t

e

r

n

e

t

S

wit

ch

wit

WGS-

h

4

814HP

-

P

o

r

t

PoE+

P

o

E

+

Magnet Mounting

, 1.5A

max.

5

AC

TLNK

Uplink

6

7 8

PoE Usage

60W

45W

30W

15W

Standard

VLAN

Extend

48-56V

- 2 -

- 4 -

- 6 -

- 8 -

Step 2-2: Or the switch, shown in the picture below, can be hung

on the wall by screwing the two screws leaving a space
of 2mm apart after the anchors are hammered in.

PoE+

1

3

PoE Usage

60W

45W

30W

15

W

Standa

r
VLAN

Extend

48-56V

42

ACTLNK

PoE-in-U

PWR

d

DC Inp

se

I

ndust

r

ial 8-

Por

t

G

igabit

Ethernet Sw

it

ch w

it

W

h 4-Por

G

S-814HP

t

PoE+

PoE+

Magnet Mounting

ut

Range

, 1.5A

max.

ACTLNK

Uplink

5

7

86

M4 Screw

2mm

3.2 DIN-rail Mounting Installation

The DIN-rail kit is included in the Wall-mount Gigabit Switch
package. To hang up the Wall-mount Gigabit Switch, follow the
steps below:

Step 1: Screw the DIN-rail bracket on the Wall-mount Gigabit

Switch.

4. Customer Support

Thank you for purchasing PLANET products. You can browse our

online FAQ resource and User’s Manual on PLANET Web site rst

to check if it could solve your issue. If you need more support
information, please contact PLANET switch support team.

PLANET online FAQs:
https://www.planet.com.tw/en/support/faq

Switch support team mail address:
support @planet.com.tw

Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.

- 9 -

Step 2: Lightly press the bottom of DIN-rail bracket into the

track.

Step 3: Check whether the DIN-rail bracket is tightly on the track.

PoE
+

Data+ P

ower

PoE Po

1

1

wer

Usage (W)

PoE
Usage

2

2

60W

120

3 4

3

45W

90

4

30W

LN

60

K

ACTLNK

AC

Po

PoE

T

E-in-Us

In-

15W

Use

e

30

PWR

PWR

Standard

VLA

8-Por

I

N

n

d

Ex

u

t

t G

st

end

ri

al

igabit Ether

w

8

Et

ith 4-Por

-

h

P

ern

o

rt

Gigab

et

Swit

net Sw

WGS-814HP

t PoE+

it

c

h
wi

itch

PoE+

t

h

4

-P

Magnet Mounting

o

rt

P

o

DC Input Range

E+

48-56V

, 1.5A max.

5

1

Push

1000

Data

K

Upli

ACTLNK

AC

nk

TLN

6

7 865

7

8

2

Click

G
r

Po

PoE Usage

E Us

120W

6

0W

4

90W

5W

3

60W

0W

1

30W

5W

ound

Standard

VL
Extend

V
+

PoE+

age

PWR

PWR

AN

DC

DC Input Range

Input

48-

48-56V

56V

Range
,

, 3A max.

1.5A m

Data+ Power

21

Industria

Industrial 8-Port Gigabit Ethernet

l

E

Switc

the

rnet

h with 4-Port PoE+

WGS-814H

WGS-804HP

S

P

ax.

Data

5

6

3 4

3

8-

Port G

w

i

tch w

PoE+

PoE

Magnet Mounti

Magnet Mounting

Uplink

7

7 865

421

PoE-in-Use

ACTLNK

PoE

-in-Us

ACTLNK

e

i

g

a

bi

t

i

th

4-

Port PoE+

ng

1000

LNK

ACTLNK

ACT

8

3.3 Magnet Installation

To install the Wall-mount Gigabit Switch on a magnetic surface,
simply follow the following diagram:

PoE+

1

3

PoE Usage

60W

45W

30W

15W

PWR

Standard

VLAN

Extend

DC Input Rang

48-56V

, 1.5A

42

ACTLNK

PoE-in-Us

e

I

n

d

u

s

t

r

i

a

l

8

-

P

o

r

t

Gi

g

a

E

b

t

h

i

t

e

r

n

e

t

S

wi

t

ch

wi

t

WGS-

h

4

814HP

-

P

o

r

t

P

PoE+

o

E

+

Magnet Mounting

e

max.

ACTLNK

Uplink

5

7

86

- 11 -

Appendix: Product Specications

Model WGS-814HP WGS-818HP

Hardware Specications

Network
Connector

PoE Inject Port 4 8

Power
Requirements

Power
Consumption

ESD Protection 4KV DC

Surge Protection 6KV DC

DIP Switch

Enclosure IP30 metal

Dimensions 148 x 24.2 x 134 mm (W x D x H)

Weight 472 g 474 g

Switch Specications

MAC Address
Table

Data Buer 64Kbytes

Switch Fabric 16Gbps

Switch Throughput 11.9Mpps@64bytes

Flow Control

8-port RJ45 for 10/100/1000BASE-T
Auto-negotiation and auto MDI/MDI-X

48~56V DC, 1.5A max. 48~56V DC, 3A max.

70 watts/239 BTU 137 watts/467 BTU

Selectable operation mode
Standard/VLAN/Extend

4K MAC address table with auto learning
function

Back pressure for half duplex.
IEEE 802.3x pause frame for full duplex

Power over Ethernet

PoE Standard

IEEE 802.3at Power over Ethernet Plus PSE
Backward compatible with IEEE 802.3af PoE

PoE Type End-span PSE

Power Pin
Assignment

1/2(+), 3/6(-)

PoE Power Output Per port 52V~54V DC, 30 watts (max.)

PoE Power Budget 60 watts 120 watts

Standard Conformance

IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet

Standard
Compliance

IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus

IEEE 802.3az Energy Ecient Ethernet (EEE)

Regulatory
Compliance

FCC Part 15 Class A, CE

Environment

Operating

Storage

Temperature: -20 ~ 60 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

- 10 -

- 12 - - 13 -