Planet WGS-810 Installation Manual

1. Package Contents
Thank you for purchasing PLANET 8-port 10/100/1000T Wall­mounted Gigabit Ethernet Switch.
In the following sections, unless specied, the term “Wall-mount Gigabit Switch” mentioned in this user’s manual refers to the
above model.
Open the box of the Wall-mount Gigabit Switch and carefully unpack it. The box should contain the following items:
The Wall-mount Gigabit Switch x 1 User’s Manual x 1
2. Hardware Description
2.1 Switch Front View
The front panel of the Wall-mount Gigabit Switch consists of 8 auto-sensing 10/100/1000Mbps Ethernet RJ45 ports. The LED indicators are also located on the RJ45 ports of the Wall-mount Gigabit Switch.
WGS-810 Front View
3 421
ACTLNK
2.3 DIP Switch
The front panel of Wall-mount Gigabit Switch provides one DIP switch for Standard, VLAN and Extend mode selections. The detailed descriptions are shown in the following table.
DIP Switch Mode Function
Standard
VLAN
Extend
Standard
VLAN
Extend
This mode makes the Wall-mount Gigabit Switch operate as a general switch and all ports operate at 10/100/1000Mbps auto­negotiation.
This mode makes the Wall-mount Gigabit Switch operate as a VLAN isolation switch and
1. Port 1 to port 6 will isolate respectively.
2. Port 1 to port 6 can only communicate with port 7 and port 8 (uplink port).
3. Installation
3.1 Wall-mount Installation
To install the Wall-mount Gigabit Switch on the wall, simply follow the following steps:
Step 1: Place the Wall-mount Gigabit Switch on the wall and
mark the four holes with a pencil.
Ø4mm
Ø8mm
6mm
133mm
Wall-mounted Kit x 1 Magnet Kit x 1 RJ45 Dust Cap x 8
- 1 -
Power Adapter x 1 DIN-rail Kit x 1
If any item is found missing or damaged, please contact your local reseller for replacement..
Standard
Extend
VLAN
PWR
DC Input Range 12V
, 1A max.
Industrial 8-Port Gigabit Ethernet Switch
WGS-810
Magnet Mounting
Uplink
7 865
ACTLNK
Figure 2-1: WGS-810
- 3 -
2.2 LED Indicators
System and Ports
LED Color Function
PWR Green Lights to indicate that the Switch has power.
To indicate the link through that port is successfully established.
To indicate that the switch is actively sending or receiving data over that port.
LNK/ ACT
Lights
Green
Blinks
This mode makes the Wall-mount Gigabit
Standard
VLAN
Extend
Switch operate as a VLAN isolation switch and
1. Port 1 to port 6 will isolate respectively.
2. Port 1 to port 6 can only communicate with port 7 and port 8 (uplink port).
3. Transmission distance of 250m at speed of 10Mbps.
Please reboot the Wall-mount Gigabit Switch after
Note
adjusting the DIP switch.
- 5 -
2.4 Physical Dimensions
W x D x H: 148 x 24.2 x 134 mm
24.20
118.00
148.00
133.00
Step 2-1: Hammer the anchors provided into the four holes and
use the four screws to tightly x the switch onto the
wall by screwing them.
PoE+
PWR
Industrial 8-Port Gigabit Ethernet Switch with 4-Port PoE+
DC Input Range
, 1.5A max.
3 421
ACTLNK
PoE-in-Use
WGS-814HP
PoE+
Magnet Mounting
ACTLNK
Uplink
7 865
PoE Usage
60W
45W
30W
15W
Standard
VLAN
Extend
48-56V
- 7 -
Step 2-2: Or the switch, shown in the picture below, can be hung
on the wall by screwing the two screws leaving a space of 2mm apart after the anchors are hammered in.
PoE+
3 421
PoE Usage
60W
45W
30W
15W
24.20
3 421
ACTLNK
PWR
Standard
VLAN
Extend
DC Input Range
48-56V
Industrial 8-Port Gigabit Ethernet Switch with 4-Port PoE+
WGS-814HP
, 1.5A max.
ACTLNK
PoE-in-Use
PoE+
Magnet Mounting
7 865
ACTLNK
Uplink
M4 Screw
2mm
- 2 -
- 4 -
134.00
118.00
Standard
Extend
VLAN
PWR
DC Input Range
, 1A max.
12V
Industrial 8-Port Gigabit Ethernet Switch
WGS-810
Magnet Mounting
Uplink
7 865
118.00
- 6 -
6.00
3.2 DIN-rail Mounting Installation
The DIN-rail kit is included in the Wall-mount Gigabit Switch
ACTLNK
package. To hang up the Wall-mount Gigabit Switch, follow the steps below:
Step 1: Screw the DIN-rail bracket on the Wall-mount Gigabit
Switch.
- 8 -
User’s Manual
Step 2: Lightly press the bottom of DIN-rail bracket into the
track.
Step 3: Check whether the DIN-rail bracket is tightly on the track.
PoE+
Data+ Power
PoE Power Usage (W)
PoE Usage
60W
120
3 421
3 421
45W
90
30W
60
ACTLNK
ACTLNK
PoE-in-Use
PoE In-Use
15W
30
PWR
PWR
Standard
VLAN
8-Port Gigabit Ethernet Switch
Industrial 8-Port Gigabit
Extend
with 4-Port PoE+
Ethernet Switch with 4-Port PoE+
WGS-814HP
PoE+
Magnet Mounting
DC Input Range
48-56V
, 1.5A max.
1
Push
1000
Data
Uplink
ACTLNK
ACTLNK
7 865
7 865
2
Click
PoE Usage
PoE Usage
120W
60W
45W
90W
30W
60W
15W
30W
Ground
Standard
VLAN Extend
V+
PoE+
PWR
PWR
DC Input Range
DC Input Range
48-56V
48-56V
, 1.5A max.
, 3A max.
Data+ Power
3 421
3 421
PoE-in-Use
PoE-in-Use
Industrial 8-Port Gigabit
Industrial 8-Port Gigabit Ethernet
Ethernet Switch with 4-Port PoE+
Switch with 4-Port PoE+
WGS-814HP
WGS-804HP
PoE+
PoE
Magnet Mounting
Magnet Mounting
Data
1000
Uplink
7 865
7 865
ACTLNK
ACTLNK
ACTLNK
ACTLNK
3.3 Magnet Installation
To install the Wall-mount Gigabit Switch on a magnetic surface, simply follow the following diagram:
PoE+
3 421
PoE Usage
60W
45W
30W
15W
PWR
Standard
VLAN
Extend
DC Input Range
48-56V
, 1.5A max.
ACTLNK
PoE-in-Use
Industrial 8-Port Gigabit Ethernet Switch with 4-Port PoE+
WGS-814HP
PoE+
Magnet Mounting
ACTLNK
Uplink
7 865
- 9 -
Appendix: Product Specications
Model WGS-810
Hardware Specications
Network Connector
Power Requirements
Power Consumption
ESD Protection 4KV DC
Surge Protection 6KV DC
DIP Switch
Enclosure IP30 metal
Dimensions 148 x 24.2 x 134 mm (W x D x H)
Weight 446 g
Switch Specications
MAC Address Table
Data Buer 64Kbytes
Switch Fabric 16Gbps
Switch Throughput 11.9Mpps@64bytes
Flow Control
8-port RJ45 for 10/100/1000BASE-T Auto-negotiation and auto MDI/MDI-X
12V DC, 1A max.
3 watts/10 BTU
Selectable operation mode
- Standard/VLAN/Extend
4K MAC address table with auto learning function
Back pressure for half duplex. IEEE 802.3x pause frame for full duplex
- 11 -
www.PLANET.com.tw
PLANET Technology Corp.
10F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
Warning:
This device is compliant with Class A of CISPR 32. In a residential environment this device may cause radio interference.
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy savings, please remove the DC plug or slide the hardware-based Power Switch to the OFF position to disconnect the device from the power circuit. Without removing the DC plug from or switching off the device, the device will still consume power from the power source. In view of Saving the Energy and reducing the unnecessary power consumption, it is strongly suggested to power off or to remove the DC plug from the device if this device is not intended to be active.
2350-AW1010-000
Industrial 8-Port 10/100/1000T Wall-mounted Gigabit Ethernet Switch
WGS-810
4. Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource and User’s Manual on PLANET Web site rst
to check if it could solve your issue. If you need more support information, please contact PLANET switch support team.
PLANET online FAQs: https://www.planet.com.tw/en/support/faq
Switch support team mail address: support @planet.com.tw
Standard Conformance
IEEE 802.3 Ethernet
Standard Compliance
IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Flow Control
IEEE 802.3az Energy Ecient Ethernet (EEE)
Regulatory Compliance
FCC Part 15 Class A, CE
Environment
Operating
Storage
Temperature: -20 ~ 60 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Temperature: -20 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Copyright © PLANET Technology Corp. 2020. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
- 10 -
- 12 - - 13 -
Loading...