Page 1
Page 2
Quick Reference Sheet
QUICK REFERNCE SHEET for KVM Switch Operation Commands
Hotkeys and Front-Panel Button
Command Hotkeys Front-Panel Button Description
Select PC
Scroll Lock + Scroll Lock + (x)
x = 1 ~ 2/1~4 for PC channel number
-- Select the active channel
Previous Channel
Scroll Lock + Scroll Lock + ↑ (arrow
up)
-- Select the previous connected PC
Next Channel
Scroll Lock + Scroll Lock + ↓ (arrow
down)
Press the Select button to switch to the
next PC
Select the next connected PC
Autoscan Beep Sound
On/Off
Scroll Lock + Scroll Lock + B
--
Toggle on/off the beep sound for switching
confirmation while autoscanning
Reset KVM
Scroll Lock + Scroll Lock + End
-- Reset the KVM Switch for switch system reboot.
Autoscan
Scroll Lock + Scroll Lock + S
--
Autoscan through every connected channel for
quick screen browsing of each channel.
Stop Autoscan
Any key on keyboard -- Terminate Autoscan activity
Notes:
Note that (x) denotes a number key for the selected port number (from 1 ~ 4). . Only the top row number keys are available for hotkeys. Do not use the
number pad for hotkey commands.
Hotkey convention: The hotkey notation Scroll Lock + Scroll Lock + (key), denotes that you should hit the individual key consecutively one at a time, not
simultaneously.
Loading...