Planet IGTP-805AT User Manual

IGTP-80xT
1000BASE-X to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter
Physical Port
1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af
/802.3at PoE+ Injector
1 1000BASE-SX/LX SC Fiber interface
(IGTP-802T/IGTP-802TS)
1 SFP slot, supporting 1000BASE-X and 100BASE-FX
transceiver dual mode (IGTP-805AT)
Power over Ethernet
Complies with IEEE 802.3at/af PoE Plus end-span PSE
1 IEEE 802.3at/af device powered
Supports PoE Power up to 30.8 watts for PoE port
Provides DC 52V power over RJ45 Ethernet cable to PD
with Ethernet port
Auto-detects IEEE 802.3at/af equipment and protects
conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3at Power over
Ethernet Plus (PoE+) injector to deliver both up to 30 watts of power output and
high data transmission speed to PDs (powered devices) installed in a remote area
where sufficient and reliable power input is required. Its 1000BASE-X fiber optic
uplink port provides long distance, high speed and stable data transmission to a
remote core network. The special and convenient power system of the IGTP-80xT
supports 12~48V DC power input or 24V AC power input for power redundancy
and operational exibility.
devices from being damaged by incorrect installation
Remote power feeding up to 100m
IEEE 802.3at/af splitter devices compatible
Layer 2 Features
Supports auto-negotiation and 10/100Mbps half/full duplex
and 1000Mbps full duplex mode on RJ45 port
Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
Being able to operate under the temperature ranging from -40 to 75 degrees C
and with an IP30 rugged case, the IGTP-80xT can be placed in almost any difcult
environment.
Hardware
LED Indicators
– System: Power 1, Power 2 and Fault LED
– Fiber port: LNK/ACT
– 10/100/1000BASE-T port: LNK/ACT, 1000, PoE-in-use
DIP switch: LFP (Link Fault Passthrough) mode selection
Industrial Case and Installation
IP30 metal case
DIN-rail or wall-mount design
12 ~ 48V DC/24V AC redundant power with polarity
reverse protect function and connective removable terminal
block for master and slave power
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature
Data Sheet
1
1
DC 12~48V, AC 24V
IGTP-80xT
1000BASE-SX/LX Fiber Optic
802.3af/802.3at PoE Compliant PD Device
52V DC PoE
10/100/1000BASE-T
12~48V DC to 52V DC PoE Power Boost
1000BASE-SX/LX to 10/100/1000BASE-T Media Converter
Fiber-optic Link Capability Extends the Range of Network Deployment
The maximum distance between a PoE PSE (power sourcing equipment) and PD via Ethernet cable is 100 meters. To extend the PoE deployment range, the
IGTP-80xT is integrated with ber interface for farther distance applications. The IGTP-80xT’s ber connector type is as follows:
■ IGTP-802T Fiber SC connector supporting 1000BASE-SX multi-mode and transmission distance up to 550m.
■ IGTP-802TS Fiber SC connector supporting 1000BASE-LX single-mode and transmission distance up to 10km.
■ IGTP-805AT SFP slot supporting 100BASE-FX/1000BASE-X multi/single mode SFP module and transmission distance up to 120km (Varying on SFP
module).
With the long ber distance support, the IGTP-80xT still sustains the transmission performance as high as 1000Mbps. It works in the high-performance Store
and Forward mechanism, and also can prevent packet loss with IEEE 802.3x ow control and the LFP (Link Fault Passthrough) function in the DIP switch
design. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitor the network power
usage.
Plug and Play High Power Sourcing Solution
Complying with the IEEE 802.3at Power over Ethernet Plus technology, the IGTP-80xT provides up to 30 watts of PoE output power, doubling that
of the earlier 802.3af. It is also backward compatible with 802.3af PoE standards to allow users to flexibly deploy standard and high powered devices
simultaneously with no need of software conguration. With data and Power over Ethernet from one unit, the IGTP-80xT can reduce cable deployment and
eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.
Convenient and Reliable Power System
To facilitate the 802.3at power PoE+ usage with the commonly-used 12~48V DC power input or 24V AC power input for transportation and industrial-level
applications, the IGTP-80xT adopts the 12~48V DC to 52V power boost technology to solve power source issue but does not require special power supplies.
Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.
Environmentally Hardened Design for Industrial PoE Networks
The IGTP-80xT is specically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding
environments like plant oors or curbside trafc control cabinets. The IGTP-80xT is packaged in a compact, IP30 rugged case that allows either DIN-rail or
wall mounting to have the efficient use of cabinet space. With IP30 rugged case protection and PoE design, the IGTP-80xT is ideal for service providers,
campuses and public areas to deploy PoE wireless access points, IP cameras or IP phones in any places easily and efciently with cost-effectiveness. It can
also operate in wide temperature range of -40 to 75 degrees C, so it can be placed in almost any location.
2
IGTP-80xT
Power Line (DC)
Outdoor IP Camera
Outdoor PoE Camera
Wireless
PoE AP
Emergency VoIP Phone
1000BASE-SX/LX Fiber-optic
1000
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Remote Monitoring
Fiber Switch
Freeway
Data Center
IP Surveillance
Wireless Community
PoE
1000
1000
1000
1000
Internet
IGTP-805AT
IGTP-802TS
IGTP-802TS
IGTP-802T
PoE
Applications
Flexible and User-friendly PoE Deployment with Gigabit Fiber Extension
For the places difficult to find the power outlet, the IGTP-80xT provides the easiest way to power network equipment such as PTZ (Pan, Tilt & Zoom) IP
cameras, speed dome IP cameras, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a/b/g/n/ac) wireless LAN access points and other network
devices that need higher power to function normally. For instance, users can exibly install security IP camera, wireless access point and other IEEE 802.3at
/IEEE 802.3af compliant network equipment in the public areas such as stations, freeways, airports and campuses for surveillance and wireless roaming
needs.
IGTP-802TS
Remote Monitoring
PoE Wireless Access Point
Internet
1000
PoE
PTZ Speed Dome
Factory
DC
PoE Splitter
PoE
1000
1000BASE-SX/LX Fiber-optic
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
DC
Control Center
IGTP-805AT
IGTP-802T
Fiber Switch
1000
1000
PoE
Railway
PTZ Speed Dome
Freeway
3
Specications
IGTP-80xT
Product
Hardware Specication
Copper
1000BASE-X Fiber-optic Connector Type SC SC SFP (LC)
Fiber Cable
Fiber Cable Distance 220m & 550m 10km
Fiber Optical Frequency 850nm 1310nm
Launch Power
Receive Sensitivity -13.5dBm -14.4dBm
Maximum Input Power -18dBm -20dBm
Power over Ethernet
PoE Standard
PoE Power Output
PoE Power Supply Type End-span
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 30 watts
Hardware Specications
Speed
Flow Control
Maximum Frame Size 9K
LED
Dimensions (W x D x H) 135 x 87 x 32 mm
Weight 510g 500g
Unit Input Voltage
Power Consumption
Link Fault Passthrough DIP Switch
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
Alarm
Cables
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
10/100/1000BASE-T Ethernet TP interface. Maximum 100m distance. Auto-negotiation, auto MDI/MDI-X with PoE injector function
IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
52V DC: 15.4 watts 52V DC: 30 wat ts
Twisted-pair:
10/20Mbps for half/full duplex 100/200Mbps for half/full duplex 1000/2000Mbps for full duplex
Fiber Optic:
200Mbps/2000Mbps for full duplex
Back pressure for half duplex mode IEEE 802.3x pause frame for full duplex mode
System: Power 1, Power 2 and Fault LED (Green) Fiber 1000BASE-X: LNK/ACT (Green) TP 10/100/1000BASE-T: LNK/ACT, 1000 (Green) PoE: Power-in-use (Orange)
12 ~ 48V DC 24V AC
24V: 4.3watts/14BTU, 48V: 4.8watts/16BTU (without PoE) 24V: 33watts/112BTU, 48V: 31watts/105BTU (with PoE)
ON/OFF
Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V
10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters) EIA/TIA-568 100-ohm STP (maximum 100 meters)
100BASE-FX/1000BASE-SX/LX:
Multi-mode: 50/125μm or 62.5/125μm optical ber Single-mode: 9/125μm optical ber
IGTP-802T IGTP-802TS IGTP-805AT
Multi-mode: 50/125µm or
62.5/125µm optic ber
Max. -4dBm
Min. -9.5dBm
Single-mode: 9/125µm optic ber
Max. -3dBm
Min. -9.5dBm
Varying on SFP Module
4
Protocols and Standards Compliance
Stability Testing
Environment
Temperature
Humidity
Dimensions
IGTP-802T/IGTP-802TS Multi View Drawing
IGTP-80xT
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration)
Operating: -40~75 degrees C Storage: -40~85 degrees C
Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing)
Bottom View
Side View
PWR1 PWR2
Fault
30.00
DC12~48V, AC 24V
Front View
10.90
LNK/ ACT
LNK/ ACT
1000
V1+ V1- V2+ V2-
Input
1000BASE-SX/LX
OFF ON
PoE-
in-Use
IGTP-802T
P1 P2
LFP
10/100/1000T
Ethernet+DC
15.20
Mounting Kit
18.00 28.00
9.20
Fault
TX
RX
135.00
Top View
46.50
48.80
39.70
Rear View
107.00
DIN-Rail Kit
28.00
Mounting Kit
28.00
48.80
40.00
163.00
28.00
87.80
9.00
Dimensions ( unit = mm )
5
IGTP-805AT Multi View Drawing
Bottom View
Side View
V1+ V1- V2+ V2-
PWR1 PWR2
Fault
Input
DC12~48V, AC 24V
Front View
Top View
IGTP-80xT
Mounting Kit
Rear View
DIN-Rail Kit
163.00
Mounting Kit
Dimensions ( unit = mm )
Ordering Information
IGTP-802T
IGTP-802TS 1000BASE-LX to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (SC,SM) -10km
IG TP - 8 0 5AT 1000BASE-SX /LX to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (mini -GBIC, SFP)
1000BASE-SX to 10/100/1000BASE-T 802 .3at PoE+ Industrial Media Conver ter (SC,MM) -550m
Related Products
ICA-2250VT
ICA-E3550V 5 Mega-pixel Bullet IR PoE IP Camera
ICA- 4200V Full HD 20M IR Vari-focal Dome IP Camera
ICA-E5550V 5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E8550 5 Mega-pixel Outdoor IR PoE Fisheye IP Camera
ICA-HM620 2 Mega- pixel PoE Plus Speed Dome Internet Camera
POE-16 2S IEEE 802.3at Gigabit High Power over Ethernet Splitter
POE-E201 IEEE 802.3at Power over Ethernet Extender
WDAP -175 0AC 1750Mbps 802.11ac Dual Band Wall-mount Enterprise Wireless Access Point
WNAP-C3220A 802.11n Wireless Ceiling-mount PoE Access Point
WNAP-W2201A 802.11n 300Mbps In-Wall Access Point w/USB Charger (EU Type)
WDAP-W7200AC 1200Mbps 802.11ac Dual Band Wall- mount Wireless Access Point
ICF-18 00 HD Touch Screen Android Multimedia Conferencing Phone
VIP-5060PT
Industr ial PoE Plus Outdoor IR IP Camera
Professional HD PoE IP Phone (6-Line)
6
IGTP-80xT
SFP Gigabit Modules are available for the IGTP-805AT
Gigabit Ethernet Transceiver (1000BASE-X SFP)
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
MGB-GT 1000 Copper -- 100m -- 0 ~ 60 ºC MGB-SX 1000 LC Multi Mode 550m 850nm 0 ~ 60 ºC MGB-SX2 1000 LC Multi Mode 2km 1310n m 0 ~ 60 ºC MGB-LX 1000 LC Single Mode 10km 1310n m 0 ~ 60 ºC MGB-L30 1000 LC Single Mode 30km 1310nm 0 ~ 60 ºC MGB-L50 1000 LC Single Mode 50km 1550nm 0 ~ 60 º C MGB - L70 1000 LC Single Mode 70km 1550nm 0 ~ 6 0 ºC MGB - L1 2 0 1000 LC Single Mode 120km 1550nm 0 ~ 60 º C MG B-TSX 1000 LC Multi Mode 550m 850nm -40 ~ 75 ºC MGB-TLX 1000 LC Single Mode 10km 1310nm -40 ~ 75 º C MGB-TL30 1000 LC Single Mode 30km 1310nm -40 ~ 75 ºC MG B-TL7 0 1000 LC Single Mode 70km 1550nm -40 ~ 75 ºC
Gigabit Ethernet Transceiver (1000BASE-BX, Single Fiber Bi-directional SFP)
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
MG B - LA10 MGB- LB10 MGB-LA20 MGB- LB20 MGB-LA40 MGB-LB40 MGB-L A60 MGB-LB60 MG B -TL A10 MG B-TLB10
MG B-TL A 20 MG B-TLB20
MGB-TLA40 MGB-TLB40 MG B-TL A60 MG B-TLB6 0
1000 WDM (LC) Single Mode 10km
1000 WDM (LC) Single Mode 20km
1000 WDM (LC) Single Mode 40km
1000 WDM (LC) Single Mode 60km
1000 WDM (LC) Single Mode 10km
1000 WDM (LC) Single Mode 20km
1000 WDM (LC) Single Mode 40km
1000 WDM (LC) Single Mode 60km
1310n m 1550nm 1550nm 1310nm 1310n m 1550nm 1550nm 1310nm 1310n m 1550nm 1550nm 1310nm 1310n m 1550nm 1550nm 1310nm 1310n m 1550nm 1550nm 1310nm
1310n m 1550nm
1550nm 1310nm 1310n m 1550nm 1550nm 1310nm 1310n m 1550nm 1550nm 1310nm
0 ~ 60 ºC
0 ~ 60 ºC
0 ~ 60 ºC
0 ~ 60 ºC
-40 ~ 75 º C
-40 ~ 75 º C
-40 ~ 75 º C
-40 ~ 75 º C
Fast Ethernet Transceiver (100BASE-X SFP)
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60 ºC MFB-F20 10 0 LC Single Mode 20km 1310 nm 0 ~ 6 0 ºC MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 ºC MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 ºC MFB-F12 0 10 0 LC Single Mode 120 km 1310nm 0 ~ 60 ºC MFB-T FX 100 LC Multi Mode 2km 1310nm -40 ~ 75 º C MFB-T F2 0 100 LC Single Mode 20km 13100 nm -40 ~ 75 º C
Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP)
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
MFB- FA 20 MFB-FB20 MFB-T FA 20 MFB-TFB20 MFB-T FA40 MFB-TFB40
100 WDM ( LC) Single Mode 20km
100 WDM ( LC) Single Mode 20km
100 WDM ( LC) Single Mode 40km
1310n m 1550nm 1550nm 1310nm 1310n m 1550nm 1550nm 1310nm 1310n m 1550nm 1550nm 1310nm
0 ~ 60 ºC
-40 ~ 75 º C
-40 ~ 75 º C
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 Email: sales@planet.com.tw www.planet.com.tw
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved.
IGTP-80xT
7
Loading...