PLANET FGSW-2612PVM User Manual

1. Package Content
3. Start Web Management
4. Terminal Setup (PoE Model Only)
Thank you for purchasing PLANET 24-Port Fast Ethernet + 2-Port Gigabit TP/SFP Combo Managed Switch, FGSW­2620VM / FGSW-2624SF / FGSW-2620PVM / FGSW­2612PVM series. Terms of “Managed Switch” means the switches mentioned titled in the cover page of this Quick installation guide.
The Managed Switch x 1
ò
This Quick Installation Guide x 1
ò
User’s Manual CD x 1
ò
Power Cord x 1
ò
Rubber Feet x 4
ò
Two Rack-mounting Brackets with Attachment Screws x 1
ò
RS-232 DB9 Male Console Cable (FGSW-2620PVM / FGSW-
ò
2612PVM only)
If any item is found missing or damaged, please contact your local reseller for replacement.
The Managed Switch provides a built-in browser interface. You can manage it remotely by having a remote host with Web browser, such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox.
FGSW Managed Switch
PC / Workstation
with
Web Browser
IP Address:
192.168.0.100
IP Address:
192.168.0.x
RJ-45 / UTP Cable
The following shows how to startup the Web Management of the FGSW Managed Switch, please note the Managed
Switch is congured through an Ethernet connection, make
sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Switch is
192.168.0.100 (the factory-default IP address), then the manager PC should be set at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
Figure 3-1. Web Login Screen of FGSW-2620VM
To congure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the FGSW-2620PVM / FGSW-2612PVM. The console
port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem.
PC / Workstation
Terminal emulation software
with
Serial Port
RS-232
FGSW-2620PVM Managed Switch
Serial Port
57600,8,n,1
A terminal program is required to make the software connection to the FGSW-2620PVM / FGSW-2612PVM. Windows’ Hyper Terminal program may be a good
choice. The Hyper Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the
COM port should be congured as:
- 1 -
2. Requirements
¢ Workstation installed with Ethernet NIC (Network Inter-
face Card)
orkstations of subscribers running Windows 98/ME,
¢ W
NT4
.0, 2000/XP, MAC OS9 or later, Linux, UNIX or other
platform compatible with TCP/IP protocols.
ó Above Workstation installed with WEB Browser and
A runtime environment Plug-in
JAV
¢ Ethernet Port connect
etwork cables-use standard network (UTP) cables
ó N
wit
h RJ45 connectors.
¢ Serial Port connect (FGSW-2620PVM / FGSW-2612PVM only)
Above PC with COM Port (DB-9 / RS-232) or USB-to-
ó
232 converter
RS-
It is recommended to use Internet Explore 6.0
Note
or above to access FGSW Managed Switch.
- 3 -
Login the Managed Switch
1. Use Internet Explorer 6.0 or above Web browser, enter IP address http://192.168.0.100 (the factory-default IP address or that you have just changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default user name “admin” and password “admin”. The login screen in Figure 3-1 appears.
Default IP Address: 192.168.0.100
Default User name: admin
Default Password: admin
The following screen based on FGSW-2620VM, for FGSW-2624SF, FGSW-2620PVM and FGSW-
Note
2612PVM the
FGSW-2620VM.
display will be the same to
- 5 -
3. After entering the user name and password, the Web main screen appears as Figure 3-2.
Figure 3-2. Web Main Screen of FGSW-2620VM
Now, you can use the Web management interface to continue the Switch management, please refer to the user manual for more.
For security reason, please change and
Note
memorize the new password after this first setup.
- 7 -
u Baud : 57600
u Parity : None
u Data bits : 8
u Stop bits : 1
u Flow Control : None
- 2 -
- 4 -
- 6 -
- 8 -
5. Logon to the Console
Note
6. While IP Address be changed or
(FGSW-2620PVM / FGSW-2612PVM)
Once the terminal has connected to the device, power on the FGSW-2620PVM, the terminal will display that it is running testing procedures.
Then, the following message asks the login user name and password. The factory default password as following and the login screen in Figure 5-1 appears.
Username: admin
Password: admin
forgotten admin password –
To reset the IP address to the default IP Address “192.168.0.100” and the user name / password to factory default mode (default user name and password is admin). Press the hardware reset button at the front panel about 5 seconds. After the device is rebooted, you can login the management Web interface within the same subnet of
192.168.0.xx and default user name / password. Be noted, all the previous setup will disappeared after factory reset.
Hardware Reset
Figure 5-1 FGSW-2620PVM Console Login screen
- 9 -
1. For security reason, please change and memorize the new password after this first setup.
2. Only accept command in lowercase letter under console interface.
- 11 -
7. Customer Support
Thank you for purchase PLANET products. You can browse
our online FAQ resource at the PLANET Web site rst to
check if it could solve you issue. If you need more support information, please contact PLANET switch support team.
PLANET online FAQ : http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address : support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2009.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
- 10 -
- 12 - - 13 - - 14 -
Loading...