• Hardware DIP switch for “Standard” and “VLAN” mode
selection, the “VLAN” mode for IP surveillance application
• Solid DIP switch to isolate ports to prevent broadcast storm
and defend DHCP spoong
• Automatic address learning and address aging
Hardware
• 19-inch desktop size, 1U height, rack mountable
• LED indicators for system power, per port PoE ready and
PoE activity, speed, Link/Act
• LCD monitor for system status and PoE usage status
display
• 2 silent fans to provide stable and efcient power
performance
• Supports Contact Discharge of ±4KV DC and Air Discharge
of ±6KV DC for Ethernet ESD protection
• Supports ±4KV Surge Immunity
1
FGSW-1822VHP
802.3at PoE+ Power and VLAN Isolation Operation Mode
The built-in solid DIP switch provides “Standard” and “VLAN” operation modes. The FGSW-1822VHP operates as a normal IEEE 802.at/af PoE Switch in
the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or
broadcast storm from inuencing each other.
Default PoE Mode
PoE IP Camera
PoE
Power
FGSW-1822VHP
100 meters(328 feet)
VLAN Isolation Mode
NVR
Port 17 and Port 18
Permit
FGSW-1822VHP
Flexible and Extendable Two Gigabit Uplink Solution
The FGSW-1822VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such
as NVR, video streaming server or NAS to facilitate surveillance management.
Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a
backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode ber), even going up to above
10/20/30/40/50/60/70/120km (single-mode ber or WDM ber). They are well suited for applications within the enterprise data centers and distributions.
PoE
PoE
PoE
IP Camera
IP Camera
IP Camera
PC
PoE
Port 1 and Port 16
Access Denied
100BASE-TX UTP
100BASE-TX UTP with PoE
1000BASE-T UTP
Robust Protection
The FGSW-1822VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity
to improve product stability and protects users’ networks from devastating ESD attacks, making sure the ow of operation does not uctuate.
Easy Installation and Cable Connection
As data transfer and high power PoE are transmitted over a cable, the FGSW-1822VHP is able to reduce the need of extended cables and electrical outlets
on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the
FGSW-1822VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also
supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover
cables.
2
FGSW-1822VHP
16 PoE IP Cameras
CameraCamera
PoEPoEPoEPoEPoEPoEPoEPoE
16-Channel NVR
Internet
PoE
100BASE-TX UTP with PoE
1000BASE-T UTP
1000BASE-SX/LX Fiber-optic
1000
1000
FGSW-1822VHP
Router
Applications
Perfectly-integrated Solution for PoE IP Camera and NVR System
To fulll the needs of the high power consumption of PoE network applications, the FGSW-1822VHP provides sixteen IEEE 802.3at Power over Ethernet
Plus (PoE+) ports that combine up to 30 watts of power output and data per port over one Cat5E/6 Ethernet cable. With its 7.2Gbps high-performance
switch architecture and 300-watt PoE power budget, the FGSW-1822VHP is an ideal device for catering to a medium-scale IP surveillance or public PoE
networks at a lower total cost.
For instance, one FGSW-1822VHP can be combined with one 16-channel NVR and 16 PoE IP cameras as a kit for the administrators to centrally and
efciently manage the surveillance system in the local LAN and the remote site via Internet. The recorded video les from the 16 PoE IP cameras powered
by the FGSW-1822VHP can be saved in the 16-channel NVR systems or surveillance software to perform comprehensive security monitoring.
Department/Workgroup PoE Switch
Providing sixteen 802.3at PoE+ in-line power interfaces, the FGSW-1822VHP can easily build a power that centrally controls IP phone system, IP camera
system and wireless AP group for enterprises. Cameras can be installed around the corner in the company or campus for surveillance demands. Without
the power-socket limitation, the FGSW-1822VHP makes the installation of cameras more easily and efciently.
PoE IP
Camera
Laptop
PTZ Camera
Phone
PoE VoIP
Phone
1000
1000BASE-SX/LX Fiber-optic
100BASE-TX UTP
PoE
100BASE-TX UTP with PoE
Telephone wire
DC
Power Line (DC)
PC Group
PoE
N
DC
802.3af Splitter
PoE VoIP ATA
PoE Wireless AP
PoE
PoE
FGSW-1822VHP
N
PoE
FGSW-2622VHP
PoE
1000
Core Switch
1000
3
Specications
FGSW-1822VHP
Product
Hardware Specications
802.3af/802.3at PoE Injector Port16
10/100BASE-TX MDI/MDIX Ports 16
10/100/1000BASE-T MDI/MDIX Ports2 (Combo Port)
1000BASE-X SFP/mini-GBIC Slots2 (Combo Port)
DIP Switch1 for standard mode/VLAN mode operation
Switch ArchitectureStore-and-Forward
Switch Fabric7.2Gbps/non-blocking
Switch Throughput@64 bytes5.35Mpps@64bytes
MAC Address Table 4K entries
Maximum Frame Size1536 bytes
Flow Control IEEE 802.3x pause frame for full-duplex; back pressure for half-duplex
LED
LCD Monitor
Dimensions (W x D x H)233 x 440 x 44 mm (1U height)
EnclosureMetal
Weight3.2kg
Power RequirementsAC 100~240V, 50/60Hz, 5A max.
Power Consumption/DissipationMax. 330 watts/1125 BTU
Thermal Fan2
ESD Protection
Surge Immunity±4KV
Power over Ethernet
PoE Standard
PoE Power Supply TypeEnd-span
PoE Power Output
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget300 watts
Max. Number of Class 2 PDs16
Max. Number of Class 3 PDs16
Max. Number of Class 4 PDs11
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance
Environment
Operating
Storage
FGSW-1822VHP
System:
Power (Green)
10/100BASE-TX RJ45 Interfaces:
10/100Mbps LNK/ACT (Green)
PoE-in-Use (Orange)
10/100/1000BASE-T RJ45/SFP Interfaces:
LNK/ACT (Green)
100/1000 (Green)
■ Total PoE budget
■ Total PoE usage
■ Per port PoE usage
■ PD light load protection/PD over load protection
■ Short-circuit protection (SCP)
■ Low voltage alarm, high voltage alarm
Refresh PoE status display every 10 seconds
Contact Discharge of ±4KV DC
Air Discharge of ±6KV DC
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
Per port 54V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per port 54V DC, 600mA. max. 30 watts (IEEE 802.3at)
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x ow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus