Planet FGSD-1821P, FGSD-2621P User guide

1. Package Contents

10BASE-T UTP with PoE

PoE-in-Use

Extend

Standard

Thank you for purchasing PLANET 16-/24-Port 10/100TX 802.3at PoE + 2-Port 10/100/1000T + 1-Port shared 1000X SFP Desktop Switch, FGSD-1821P or FGSD-2621P. “802.3at PoE+ Switch” mentioned in this Guide refers to the FGSD-1821P or FGSD-2621P

Open the box of the 802.3at PoE+ Switch and carefully unpack it. The box should contain the following items

The 802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1

SFP Dust Cap

x 1

Screws x 8

If any of these pieces are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the original packing material, and use them again to repack the product in case there is a need to return it to us for repair.

Rack-mounting

Brackets x 2

Rubber Feet x 4

 Per 10/100BASE-TX Port

LED Color Function

Lights to indicate the link through that

10/100 LNK/ACT

Green

port is successfully established.

Blinks to indicate that the Switch is actively sending or receiving data over that port.

PoE in Use Amber

Lights to indicate the port is providing PoE DC in-line power.

 Per 10/100/1000BASE-T Port

LED Color Function

Lights to indicate the link through that

10/100/1000 LNK/ACT

Green

port is successfully established.

Blinks to indicate that the Switch is actively sending or receiving data over that port.

 1000BASE-X SFP Port

LED Color Function

Lights to indicate the link through that port 1000 LNK/ACT

Green

is successfully established at 1000Mbps.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

Power

Standard

VLAN

Extend

FGSD-1821P

Power

Standard

VLAN

Extend

FGSD-1821P

NVR

Ports 17~18 and SFP Port 17 to Ports 1~16 Access Permitted

Standard

VLAN

Extend

FGSD-1821P

Standard Mode (default)

PoE IP Camera

PoE

100 meters (328 feet)

VLAN Isolation Mode

PoE

Extend Mode

PoE

Ports 1 to 8

250 meters (820 feet)

PoE

IP Camera

PoE

100BASE-TX UTP with PoE

Ports 1 to 16

Access Denied

100BASE-TX UTP with PoE

1000BASE-T UTP

PoE IP Camera

3 Hardware Installation

3.1 Rack Mounting

To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the instructions described below.

Step 1: Place your 802.3at PoE+ Switch on a hard at surface, with

the front panel positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+

Switch with supplied screws attached to the package. Figure 3-1 shows how to attach brackets to one side of the 802.3at PoE+ Switch.

16-Port 10/100TX 802.3at PoE

16-Port 10/100/1000T 802.3at PoE

1-Port Shared 1000X SFP Desktop Switch

10/100/1000T

8-Port 10/100/1000T 802.3at PoE

2-Port 10/100/1000T

2-Port 1000X SFP Desktop Switch

2-Port

2 6

802.3at PoE

4 8

4 12

8 16

LNK

10 14

12 16

1-Port 10G SFP

ACT

3 117 15

1 5

3 7

2 106 14 1820

9 13

1 95 13 1719

GSD-1121XP

LNK

ACT

PoE-in-Use

Figure 3-1: Attaching the Brackets to the 802.3at PoE+ Switch.

You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect

Caution

screws would invalidate the warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second bracket to the

opposite side.

2-Port 2.5G

Ethernet Switch

11 15

PoE Max

PWR

Standard

VLAN

Extend

PWR

PoE-in-Use

LNK10G

ACT

PoE-in-Use

ACTLNK

2.5G

GSD-2022P

FGSD-1821P

SFP

1000X SFP

10G

9 10 11

19 20

- 1 -

2. Hardware Introduction

2.1 Front Panel

The front panel of the 802.3at PoE+ Switch consists of 16/24 autosensing 10/100BASE-TX RJ45 ports, 2 auto-sensing 10/100/1000BASE-T RJ45 ports and 1 1000BASE-X SFP port. The LED Indicators are also located on the front panel of the 802.3at PoE+ Switch.

10 14

9 13

ACT

12 16

11 15

PoE Max

PWR

2-Port 10/100/1000T

Standard

VLAN

16-Port 10/100TX 802.3at PoE 1-Port Shared 1000X SFP Desktop Switch

4 8

2 6

3 7

1 5

LNK

Figure 2-1: FGSD-1821P Switch Front Panel

FGSD-2621P

8 162024

4 12

7 151923

3 11

6 14

2 10

5 13

1 9

PoE Max

17 PWR

PoE-

Standard

ACT

LNK

in-Use

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

VLAN

Figure 2-2: FGSD-2621P Switch Front Panel

2.2 LED Indicators

 System

LED Color Function

PWR Green Lights to indicate the Switch has power.

PoE (max.)

Green

2143658710912111413161518

1000X SFP

FGSD-1821P

1000X SFP

O to indicate the PoE power is less than 80% of total power. Lights to indicate the PoE power is above 80%.

- 3 -

2.3 Multiple Functions of DIP Switch

The front panel of the 802.3at PoE+ Switch provides one DIP switch for Standard, VLAN or Extend mode selection. The detailed descriptions are shown in the following table.

DIP Switch Mode Function

This mode makes the 802.3at PoE+ Switch operate as a general switch and all PoE+

VLAN

Extend

Standard

VLAN

Extend

VLAN

Extend

Note

Please select a DIP switch mode before powering on the

802.3at PoE+ Switch.

ports operate at 10/100Mbps auto-negotiation. All ports can communicate with one another.

This mode makes the 802.3at PoE+ Switch operate as a VLAN isolation switch and

For FGSD-1821P:

1. Ports 1 to 16 will isolate respectively.

2. Ports 1 to 16 can only communicate with ports 17~18 (uplink ports) and SFP port 17.

For FGSD-2621P:

1. Ports 1 to 24 will isolate respectively.

2. Ports 1 to 24 can only communicate with ports 25~26 (uplink ports) and SFP port 26

This mode makes the 802.3at PoE+ Switch operate as a Long Reach PoE switch and

1. Ports 1 to 8 support farthest transmission distance of up to 250 meters

2. Ports 1 to 8 have a data rate of 10Mbps

3. All ports can communicate with one another.

- 5 -

2.4 Rear Panel

The rear panel of the 802.3at PoE+ Switch indicates an AC power socket, which accepts input power from 100 to 240V AC, 50-60Hz, 5A.

100-240V , 5A max.

50/60Hz

Figure 2-3: Switch Rear Panel

 AC Power Receptacle

The device is a power-required device, which means it will not work till it is powered. If your networks

Power Notice

should be active all the time, please consider using UPS (uninterrupted power supply) for your device. It will prevent you from network data loss or network downtime.

In some areas, installing a surge suppression device may also help to protect your 802.3at PoE+ Switch from being damaged by unregulated surge or current to the 802.3at PoE+ Switch or the power adapter.

- 7 -

Step 5: After the brackets are attached to the 802.3at PoE+ Switch,

use suitable screws to securely attach the brackets to the rack, as shown in Figure 3-2.

16-Port 10/100TX 802.3at PoE

16-Port 10/100/1000T 802.3at PoE

1-Port Shared 1000X SFP Desktop Switch

10/100/1000T

2-Port 10/100/1000T

2-Port 1000X SFP Desktop Switch

2-Port

2 6

4 8

4 12

8 16

LNK

10 14

12 16

ACT

3 117 15

1 5

3 7

2 106 14 1820

1 95 13 17 19

LNK PoE-in-Use

Figure 3-2: Mounting the 802.3at PoE+ Switch in a Rack

Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at

complied PDs and other network devices.

A. Connect one end of a standard network cable to the

10/100/1000BASE-T RJ45 ports on the front panel of the 802.3at PoE+ Switch.

B. Connect the other end of the cable to the network devices such as

printer servers, workstations or routers, etc.

Step 7: Supply power to the 802.3at PoE+ Switch.

A. Connect one end of the power cable to the 802.3at PoE+ Switch.

B. Connect the power plug of the power cable to a standard wall

outlet.

When the 802.3at PoE+ Switch receives power, the power LED should remain solid Green.

9 13

11 15

PoE Max

ACT

PWR

Standard

VLAN

Extend

PoE-in-Use

GSD-2022P

FGSD-1821P

1000X SFP

19 20

- 2 -

- 4 -

- 6 -

- 8 -

3.2 Installing the SFP Transceiver

The sections describe how to insert an SFP transceiver into an SFP port of the 802.3at PoE+ Switch.

The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the 802.3at PoE+ Switch, as Figure 3-3 shows.

16-Port 10/100TX 802.3at PoE

16-Port 10/100/1000T 802.3at PoE

1-Port Shared 1000X SFP Desktop Switch

10/100/1000T

8-Port 10/100/1000T 802.3at PoE

2-Port 10/100/1000T

2-Port 1000X SFP Desktop Switch

2-Port

2 6

802.3at PoE

4 8

4 12

8 16

LNK

10 14

12 16

3 117 15

1 5

3 7

2 106 14 18 20

9 13

11 15

1 95 13 17 19

LNK

GSD-1121XP

ACT

PoE-in-Use

 Approved PLANET SFP Transceivers

PLANET 802.3at PoE+ Switch supports both single mode and multi-mode SFP transceivers. The website link of ap-proved PLANET SFP transceivers is shown below:

https://www.planet.com.tw/en/product/mgb-series-transceiver

It is recommended to use PLANET SFP on the 802.3at PoE+ Switch. If you insert an SFP transceiver that is not

Note

supported, the 802.3at PoE+ Switch will not recognize it.

1-Port 10G SFP

ACT

2-Port 2.5G

Ethernet Switch

PoE Max

PWR

Standard

VLAN

Extend

PoE-in-Use

PWR

LNK10G

ACT

PoE-in-Use

ACTLNK

2.5G

GSD-2022P

FGSD-1821P

SFP

1000X SFP

10G

9 10 11

19 20

MGB-Series SFP Transceiver

LC Fiber Cable

Figure 3-3: Plugging In the SFP Transceiver

4.ProductSpecications

Model FGSD-1821P FGSD-2621P

HardwareSpecications

10/100BASE-TX RJ45 Port with

802.3af/802.3at PoE+ Inject

10/100/1000BASE-T RJ45 Port

1000BASE-X SFP/ mini-GBIC Slot

DIP Switch

Dimensions (W x D x H)

Enclosure Metal

Weight 1800g 1870g

Power Requirements 100~240V AC, 50/60Hz, 5A max.

Power Consumption/ Dissipation

Thermal Fan 1

ESD Protection

Surge Protection DierentialMode±4KV,CommonMode±6KV

16 24

2 (Port-17 shared with SFP port)

2 (Port-26 shared with SFP port)

1 (shared with Port-17)1(shared with Port-26)

Selectable operation mode

 Standard  VLAN  Extend

280 x 180 x 44 mm (1U height)

Max. 207 watts/706 BTU

Max. 217 watts/740 BTU

Contact discharge of ±6KV DC, Air discharge of ±8KV DC

- 9 -

1. Before we connect the 802.3at PoE+ Switch to the other network device, we have to make sure both sides of the SFP transceivers are with the same media type, for example, 1000BASE-SX to 1000BASESX; 1000BASE-LX to 1000BASE-LX.

2.Checkwhether theber-optic cabletype matcheswith theSFPtransceiver requirement.

To connect to 1000BASE-SX SFP transceiver, please use the

multi-mode ber cable with one side being the male duplex LC

connector type.

 To connect to 1000BASE-LX SFP transceiver, please use the

single-mode ber cable with one side being the male duplex LC

connector type.

- 11 -

Installation Desktop or rack-mount installation

System

Power (Green) PoE Max. (Green)

LED

Switching

Switch Architecture Store-and-Forward

Switch Fabric 7.2Gbps/non-blocking 8.8Gbps/non-blocking

Switch Throughput@64bytes

MAC Address Table 16K entries

Jumbo Frame 16K bytes

Flow Control

Power over Ethernet

PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE

PoE Injector Ports 16 24

PoE Power Supply Type

PoE Power Output Per port 55V DC, 600mA. max. 32 watts

PoE Power Budget 185 watts

Number of PDs, 7 watts

10/100/1000T RJ45 Interfaces

10/100/1000 LNK/ACT (Green) PoE-in-Use (Amber)

1000X SFP Interfaces

1000 LNK/ACT (Green)

5.36Mpps 6.5Mpps

IEEE 802.3x pause frame for full duplex; back pressure for half duplex

End-span: 1/2 (+), 3/6 (-)

16 24

Number of PDs,

15.4 watts

Number of PDs, 30 watts

Standards Conformance

Regulatory Compliance

Standards Compliance

Environment

Operating

Storage

12 12

6 6

FCC Part 15 Class A, CE

IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3z Gigabit SX/LX

IEEE802.3xowcontrolandbackpressure

IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus

IEEE802.3azEnergy-EcientEthernet

Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing)

Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing)

5. Customer Support

Thank you for purchasing PLANET products. You can browse our online

FAQ resource on PLANET Web site rst to check if it could solve your

issue. If you need more support information, please contact PLANET support team.

PLANET online FAQs: https://www.planet.com.tw/en/support/faq

Support team mail address support@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

- 10 -

- 12 - - 13 - - 14 -

Planet FGSD-1821P, FGSD-2621P User guide

Specifications and Main Features

Frequently Asked Questions

User Manual