PLANET ET-509A User Manual

ET-509A

TP-BNC Converter

ET-508 /ET-508S

TP-Fiber (Multi-mode / Single-mode)

IEEE802.3 Ethernet Converter

1. Overview

IEEE802.3 10Mbps Ethernet supports various type media for network connection such as
10Base-2, 10Base-T and 10Base-FL. The media converter is used to convert one type
media signal to other type equivalent that allows multiple type segments connect easily and
inexpensively. This converter can be used as a standalone unit or as a slide-in module to the
19" Media Chassis (up to 10 units) for use at a central wiring closet.

2. Model Description

Model Descripton Connector Type

ET-508S
ET-508
ET-509A

The available Fiber –optic mode

ST, MM ST type connector, Multi-Mode
ST, SM ST type connector, Single-Mode

TP-FL (Fdx/Hdx supported) RJ-45↔10Base-FL ST (SM)
TP-FL (Hdx) RJ-45↔10Base-FL ST (MM)
TP-BNC RJ-45↔10Base-2 BNC

3. Checklist

Before you start installing the Converter, verify that the package contains the following:

 The Converter
 AC-DC Power Adapter
 This User's Manual
 T-Connector(for ET-509A only)

Please notify your sales representative immediately if any of the aforementioned items is
missing or damaged.

1

4. Panel Layout

10Mbps ET-508/ ET-508S Front and Side Panel

10Mbps ET-509A Front and Side Panel

Power Input +5VDC Jack on Rear Panel

2