PLANET ENW-9503A User Manual

User’s Manual
ENW-9503A / ENW-9504
10/100 Mbps Fast Ethernet PCI Adapter
1
Copyright
All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.
FCC Caution
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason able protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energ y and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at whose own expense.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
Revision
User’s Manual for PLANET 10/100 Mbps Fast Ethernet PCI Adapter For Models: ENW-9503A (v2) / ENW-9504(v9) Revision: 1.0 (Septemper.2011) Part No. EM-ENW9503Av2_9504v9_v1.0 (2081-A13010-001)
2
Table of Contents
UCHAPTER 1U UINTRODUCTIONU............................................................................................. 1
U1.1 Package ContentU........................................................................................................... 1
U1.2 FeaturesU ......................................................................................................................... 1
U1.3 Gathering Tools and DocumentationsU........................................................................ 1
UCHAPTER 2U UHARDWARE INSTALL ATIONU ........................................................................ 2
U2.1 LED definitionsU ............................................................................................................. 2
U2.2 Hardware InstallationU ................................................................................................... 3
UCHAPTER 3U UDRIVER INSTALLATIONU................................................................................ 4
U3.1 Installing Driver to Windows Server 2003 / 2003R2 / XPU........................................... 4
U3.2 Install Driver To Other Operating SystemsU ................................................................ 6
UCHAPTER 4U UADVANCE FEATUREU ..................................................................................... 7
U4.1 How to us the Wake-On-LAN Feat ure (Only for the ENW-9503A)U ............................ 7
UCHAPTER 5U USPECIFICATIONSU .......................................................................................... 8
3

0BChapter 1 Introduction

PLANET's ENW-9503A is 10/100Mbps based 32-bit Peripheral Component Interconnect (PCI) Local Bus Ethernet adapter designed to address high-performance system application requirements. The bus-master architecture provides high data throughput in the system and low CPU and system bus utilization. The adapter provides Auto-Negotiation automatically detects and determines the optimal inter-operation mode with other devices. The ENW-9503A support both 10Mbps and 100Mbps data rates with UTP-CAT5 or STP cable. LED indicators are also provided for quick monitoring of busy, link collision and speed indication. Also, you can operate PLANE T's Fa st Ethernet Adapters in Full-duplex mode.
Featured with Wake-On-LAN, the ENW-9503A helps remote awake on LAN to offer an easy software update, data backup even in the office off time. Moreover, PLANET ENW-9503A also supports RPL and PXE BootROM for easy diskless workstation installation.

5B1.1 Package Content

Check that your package contains the following items:
9 1 x 10/100Mbps Ethernet Adapter 9 1 x CD-ROM Manual / Driver 9 1 x One WOL cable (ENW-9503A only)
Please contact the seller if any of the items is missing or damaged.
Be sure to retain your proof of purchase, as it is required to receive warranty service.

6B1.2 Features

¾ Complies to IEEE 802.3 CSMA/CD, 100Base-TX, and 10Base-T Standard ¾ Complies with PCI local bus specification. (Revision 2.2) ¾ Provides Full-duplex Ethernet operation for both 10Base-T and 100Base-TX expand the
bandwidth up to 20/200Mbps.
¾ ENW-9503A with Wake-On-LAN power connector for WOL PC connection, Magic Packet remote
wake-up.
¾ Onboard remote BootROM socket for remote workstation boot up on ENW-9503A

7B1.3 Gathering Tools and Documentations

To install the adapter, you need the following items:
9 A suitable screw driver 9 Your operating system documentation 9 Your system unit documentation, including any service documentation
Loading...
+ 7 hidden pages