Pitco PCF14 Specifications

Model PCF14 and PCF18 Crisp N’ Hold Food Cabinet Station

(Forced Hot Air Holding System)

Project_________________________ Item No.________________________ Quantity________________________

APPLICATION

The Crisp N’ Hold Food Station extends the holding time of fried food by maintaining a constant flow of heated air in and around the product. The air is filtered, re-circulated and incrementally heated to control the accumulation of moisture, conserve energy and keep food warm and crisp.

STANDARD SPECIFICATIONS

Model PCF14 and PCF18 Cris

PCF18

PCF14

STANDARD FEATURES

 Removable Product Dividers – PCF14 - Qty 1 PCF18 - Qty 2

 Collection pan pulls out for cleaning  9” (22.9cm) adjustable legs, easier

access to clean

 Bottom Shelf  Digital temperature control behind door

CONSTRUCTION

 Pan area allows for holding and

draining of finished product.

 Food Grate easily lifts out for cleaning.  Bottom Shelf provides ample storage

for breading, batter, food utensils, etc.

*Bottom Shelf is not provided when a filter pump or flush hose is located inside the dump station.

 Stainless steel front, sides, door and

splash back.

 Stainless steel Food Bay.  Heavy Duty 3/16” (.48 cm) door hinge.  Designed to match existing or

accompanying Solstice fryers.

 Unit can be installed on either side or

between solstice fryer(s).

HEATING SYSTEM

Provides a stream of constant circulation of warm air to maintain crispy food, serving temperatures, and extend holding times.

N’ Hold Food Cabinet Station

OPERATIONS

 Easily integrates into existing Solstice

fryer combinations to provide a comfortable work area or food preparation station.

 Removable Filter traps oils & are

Dishwasher safe

Pitco Frialator, Inc • P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304

603-225-6684 • FAX: 603-225-8497 • www.pitco.com

L10-346 Rev 2 06/10 Printed in the USA

AVAILABLE OPTIONS & ACCESSORIES

(at additional cost)

 9” (22.9cm) Casters

Model PCF14 and PCF18 Crisp N’ Hold Food Cabinet Station

SHORT FORM SPECIFICATION

Model PCF14 and PCF18 Crisp N’ Hold Food Cabinet Station

ORDERING INFORMATION

Specify model number of fryers desired and placement of dump station.

PCF14 or PCF18 model number indicates dump station for use with gas/electric cooking systems only.

For use with Solstice gas/electric fryers.

SHORT FORM SPECIFICATION

Provide Pitco Model PCF14 or PCF18 Crisp N' Hold Crispy Food Station. Unit shall be a one piece

cabinet to match the dimensions of existing or new SG/SE Gas/Electric equipment. Crisp N' Hold Crispy

Food Station shall be supplied with a collection pan, food grate and bottom shelf.

ELECTRICAL

PCF14 or PCF18

Provide a warming and holding area for finished products. Capable of heating to 190°F (88°C). Preheat

to 190°F (88°C) in approximately 10 minutes.

SHIPPING INFORMATION (Approximate)

Model Shipping Weight Shipping H x W x L Shipping Cube

PCF14

PCF18

Pitco Frialator, Inc • P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304

603-225-6684 • FAX: 603-225-8497 www.pitco.com

We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.

120 Volts 1820 watts, 15.1 amps, 60 hz single phase

TYPICAL APPLICATION

150.0 lb

(68.0 kg)

175.0 lb

(79.4 kg)

45.0 x 19.0 x 36.0 in

(114.3 x 48.3 x 91.4 cm)

45 x 23 x 38 in

( 88.9 x 58.4 x 96.5 cm)

L10-346 Rev 2 06/10 Printed in the USA

17.8 ft³

(0.5 m³)

22.8 ft³

(0.6 m³)