Pitco MGII Parts List
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this manual
for the life of the equipment:
Model #: ___________________________
Serial #: ___________________________
Date Purchased: ____________________
Exploded Parts Manual
MGII and MGIIT Gas Fryer Models
Built after 09/2002
ENGLISH
L22-291 Rev 1 (06/11)
Exploded Parts-MGII Gas Models
Post in a prominent location the instructions to be
followed in the event that an operator smells gas.
Obtain this information from your local gas
supplier.
WARNING
DO NOT store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
WARNING
Improper installation, alteration, service or maintenance can
cause property damage, injury or death. Read the installation,
operating and maintenance instructions thoroughly before
installing or servicing this appliance.
WARNING
Installation, maintenance and repairs should be performed by a
Pitco Authorized Service and Parts (ASAP) company technician
or other qualified personnel. Installation, maintenance or repairs
by an unauthorized and unqualified personnel will void the
warranty.
WARNING
Installation and all connections must be made according to
national and local regulations and codes in force.
WARNING
During the warranty period if a customer elects to use a nonoriginal part or modifies an original part purchased from Pitco
and/or its Authorized Service and Parts (ASAP) companies, this
warranty will be void. In addition, Pitco and its affiliates will not
be liable for any claims, damages or expenses incurred by the
customer which arises directly or indirectly, in whole or in part,
due to the installation of any modified part and/or received from
an unauthorized service center.
WARNING
This appliance, when installed, must be electrically grounded in
accordance with local codes, or in the absence of local codes,
with the National Electrical Code, ANSI/NFPA 70, or the Canadian
Electrical Code, CSA C22.2, as applicable.
WARNING
Adequate means must be provided to LIMIT the movement or this
appliance without depending on the gas or electrical cord
connection. Single appliances equipped with legs must be
stabilized by installing anchor straps. All appliances equipped
with casters must be stabilized by installing restraining chains.
WARNING
An appliance equipped with casters and a flexible gas line must
be connected to the gas supply with a quick disconnect device.
This quick disconnect must comply with ANSI Z24.41.
WARNING
DO NOT alter or remove structural material on the appliance to
accommodate placement under a ventilation hood.
WARNING
This appliance is intended for professional use only and should
be operated by fully trained and qualified personnel.
WARNING
If the appliance is equipped with a power cord and it is damaged,
it must be replaced by a Pitco Authorized Service and Parts
(ASAP) company technician, or a similarly qualified person in
order to avoid a hazard.
WARNING
The power supply must be disconnected before servicing,
maintaining or cleaning this appliance.
WARNING
The appliance is NOT jet stream approved. DO NOT clean the
appliance with a water jet.
WARNING
DO NOT attempt to move this appliance or transfer hot liquids
from one container to another when the unit is at operating
temperature or filled with hot liquids. Serious personal injury
could result if skin comes in contact with the hot surfaces or
liquids.
WARNING
DO NOT sit or stand on this appliance. The appliance’s front
panel, tank, splash back, tank cover, workshelf, drain board is
not a step. Serious injury could result from slipping, falling or
contact with hot liquids.
WARNING
NEVER use the appliance as a step for cleaning or accessing the
ventilation hood. Serious injury could result from slips, trips or
from contacting hot liquids.
WARNING
The oil/shortening level should NOT fall below the minimum
indicated level line at any time. The use of old shortening can be
dangerous as it will have a reduced flash point and be more
prone to surge boiling.
WARNING
The contents of the crumb catch and/or filter pan of any filter
system must be emptied into a fireproof container at the end of
each day. Some food particles can spontaneously combust into
flames if left soaking in certain oil or shortening.
WARNING
Completely shut the appliance down when shortening/oil is being
drained from the appliance. This will prevent the appliance from
heating up during the draining and filling process. Serious injury
can occur.
WARNING
This appliance is intended for indoor use onl y.
WARNING
DO NOT operate appliance unless all panels and access covers
are attached correctly.
WARNING
It is recommended that this appliance be inspected by a qualified
service technician for proper performance and operation on a
yearly basis.
WARNING
There is an open flame inside this appliance. The unit may get
hot enough to set nearby materials on fire. Keep the area around
the appliance free from combustibles.
WARNING
DO NOT supply the appliance with a gas that is not indicated on
the data plate. If you need to convert the appliance to another
type of fuel, contact your dealer.
WARNING
DO NOT use an open flame to check for gas leaks!
WARNING
If gas flow to appliance is interrupted, or pilots extinguish, wait 5
minutes before attempting to relight the pilot to allow any
residual gas in appliance to dissipate.
WARNING
Ensure that the appliance can get enough air to keep the fla me
burning correctly. If the flame is starved for air, it can give off a
dangerous carbon monoxide gas. Carbon monoxide is a clear
odorless gas that can cause suffocation.
L22-291 Rev 1 (06/11)
Exploded Parts-MGII Gas Models
TABLE OF CONTENTS
FRYER EXPLODED VIEW.................................................................................................................................3
FRYER EXPLODED VIEW 1 PARTS LIST..................................................................................................................................3
FRYER EXPLODED VIEW 1.....................................................................................................................................................4
F
RYER EXPLODED VIEW 2 PARTS LIST..................................................................................................................................5
RYER EXPLODED VIEW 2.....................................................................................................................................................6
F
A) TANK............................................................................................................................................................7
TANK DRAWING A PARTS LIST ..............................................................................................................................................7
T
ANK DRAWING A.................................................................................................................................................................8
B) BURNER ASSEMBLY..................................................................................................................................9
BURNER ASSEMBLY DRAWING B PARTS LIST.........................................................................................................................9
B
URNER ASSEMBLY DRAWING B.........................................................................................................................................10
C) GAS PIPING...............................................................................................................................................11
GAS PIPING DRAWING C PARTS LIST ..................................................................................................................................11
G
AS PIPING DRAWING C.....................................................................................................................................................12
D) GAS CONVERSION KITS..........................................................................................................................13
GAS CONVERSION KITS DRAWING D ...................................................................................................................................14
E) FRYER CABINET.......................................................................................................................................15
FRYER CABINET DRAWING E PARTS LIST ............................................................................................................................15
FRYER CABINET DRAWING E...............................................................................................................................................16
F) ENTRANCE BOX........................................................................................................................................17
ENTRANCE BOX DRAWING F PARTS LIST.............................................................................................................................17
ENTRANCE BOX DRAWING F ..............................................................................................................................................18
G) FRONT PANEL AND CONTROL BOX......................................................................................................19
FRONT PANEL AND CONTROL BOX DRAWING G PARTS LIST.................................................................................................19
F
RONT PANEL AND CONTROL BOX DRAWING G ..................................................................................................................20
H) CORD BOX.................................................................................................................................................21
CORD BOX DRAWING H PARTS LIST....................................................................................................................................21
C
ORD BOX DRAWING H ......................................................................................................................................................22
I) FRYER DRAIN LINE....................................................................................................................................23
FRYER DRAIN LINE DRAWING I PARTS LIST..........................................................................................................................23
F
RYER DRAIN LINE DRAWING I............................................................................................................................................24
J) FILTER ASSEMBLY...................................................................................................................................25
FILTER ASSEMBLY DRAWING J PARTS LIST..........................................................................................................................25
FILTER ASSEMBLY DRAWING J............................................................................................................................................26
K) PUMP ASSEMBLY.....................................................................................................................................27
PUMP ASSEMBLY DRAWING K PARTS LIST...........................................................................................................................27
PUMP ASSEMBLY DRAWING K.............................................................................................................................................28
L) PUMP CONTROL BOX ..............................................................................................................................29
PUMP CONTROL BOX DRAWING L PARTS LIST.....................................................................................................................29
UMP CONTROL BOX DRAWING L........................................................................................................................................30
P
M) RETURN PIPING .......................................................................................................................................31
RETURN PIPING DRAWING M PARTS LIST............................................................................................................................31
R
ETURN PIPING DRAWING M...............................................................................................................................................32
N) ACCESSORIES..........................................................................................................................................33
ACCESSORIES DRAWING N PARTS LIST...............................................................................................................................33
CCESSORIES DRAWING N ................................................................................................................................................34
A
L22-291 Rev 1 (06/11)
2
FRYER EXPLODED VIEW
Fryer Exploded View 1 Parts List
ITEM # PART # PART DESCRIPTION
B5007601-C CAPPING W ELDMENT MGII-2
1
B5007602-C CAPPING W ELDMENT MGII-3
B5007603-C CAPPING W ELDMENT MGII-4
B5007604-C CAPPING W ELDMENT MGII-5
B8036701 REAR-TEE MANIFOLD WELDMENT MGII-2
B8036702 REAR-TEE MANIFOLD WELDMENT MGII-3
2
B8036703 REAR-TEE MANIFOLD WELDMENT MGII-4
B8036704 REAR-TEE MANIFOLD WELDMENT MGII-5
B8036705 REAR-TEE MANIFOLD WELDMENT MGII-1
A4107901-C CABINET BACK SPACER MGII-1
A4107903-C CABINET BACK SPACER MGII-2
3
A4107905-C CABINET BACK SPACER MGII-3
A4107907-C CABINET BACK SPACER MGII-4
A4107909-C CABINET BACK SPACER MGII-5
A4108001-C SPLASH BACK SEAL ANGLE MGII-1
A4108003-C SPLASH BACK SEAL ANGLE MGII-2
4
A4108005-C SPLASH BACK SEAL ANGLE MGII-3
A4108007-C SPLASH BACK SEAL ANGLE MGII-4
A4108009-C SPLASH BACK SEAL ANGLE MGII-5
5 B6665002-C
FILTER PAN COVER ASSEMBLY
(INCLUDES ITEMS 9 & 11)
6 A8032801-C MANIFOLD SUPPORT BRACKET LOWER LEFT-HAND
7 A8032803-C MANIFOLD SUPPORT BRACKET LOWER RIGHT-HAND
8 60140001 SCREW 10-24 X 1/2 FLAT HEAD SELF TAPPING
9 P0007300 SCREW 8-32 X 1/4 I NDE NT E D HE X HEAD ZN
10 P6071493 HOLE P LUG 1/2"
11 P6071516 CHROME HANDLE 3"
12 P7036206 BUSHING REDUCER 1-1/4 MNPT X 1 FNPT HEX BLACK IRON
13 PP10479 PLUG 1-1/4 NPT HEX HEAD BLACK IRON
14 PP10023 SCREW 10-24 X 3/8 SELF TAPPING
Exploded Parts-MGII Gas Models
3
L22-291 Rev 1 (06/11)
Exploded Parts-MGII Gas Models
Fryer Exploded View 1
L22-291 Rev 1 (06/11)
4
Exploded Parts-MGII Gas Models
Fryer Exploded View 2 Parts List
ITEM # PART # PART DESCRIPTION
1 B6750901 WIRING HARNESS HOOD CONTROL SINGLE
2 A3667906-C FRONT PANEL BOTTOM RAIL
3 A3670101-C FRONT PANEL HEAT DEFLECTOR
4 A7027602 FILTER PICKUP BLOCK
5 A7027901 FILTER PUMP PLATE MOUNTING ROD
6 A7028401-C FILTER PUMP PLATE MOUNTING ROD HOLDER
7 A8033901-C BURNER HEAT SHIELD LEFT-HAND
8 A8033903-C BURNER HEAT SHIELD RIGHT-HAND
9 P7037359 PIPE NIPPLE 3/4 NPT SCHED-40 X 4 LG BLACK IRON
10 PP10023 SCREW 10-24 X 3/8 SELF TAPPING
11 PP11104 O-RING VITON NEWMAN #120-3107
5
L22-291 Rev 1 (06/11)
Exploded Parts-MGII Gas Models
Fryer Exploded View 2
L22-291 Rev 1 (06/11)
6
A) TANK
Tank Drawing A Parts List
ITEM # PART # PART DESCRIPTION
1 B1003601 TANK BAFFLE WELDMENT
2
3
4
5 B5305001 DRAIN VALVE INTERLOCK SENSOR ASSEMBLY
6 B6700604-C TEMPERATURE PROBE SERVICE KIT
7
8 A1407002
9 A3526701
10 A4021001-C DRAIN VALVE INTERLOCK MOUNTING PLATE
11 A8030403 DRAIN LINE ADAPTER (NON-FILTER ONLY)
12
13
14
15 P0076100 SCREW 10-24 X 3/4 SELF TAPPING
16 P0092300 NUT HEX 10-24 KEP ZN
17 PP10263 PROXIMITY ACTUATOR SWITCH
18 P P 1 02 66 SCREW 4-40 X 1/4 ROUND HEAD SLOTTED ZN
19 P P 1 06 86 SCREW 6-32 X 1/4 ROUND HEAD PHILLIPS ZN
20 PP11366 SCREW 10-24 X 5/8 PAN HEAD SST
B3324501-C
B3324601-C
B3503901
B3504001
B3504201
B3504202
A1406602
A1406802
60130101 TANK REAR ADAPTER 37.5 FLARE SWIVEL X 1/2NPT
P7036729 STEEL TANK PLUG 1/2NPT
60138701
60138703
60138702
60138704
TANK WELDMENT MG
TANK WELDMENT MG
FLUE WELDMENT MG
FLUE WELDMENT MG
FLUE BAFFLE ASSEMBLY MG
FLUE BAFFLE ASSEMBLY MG
CLAMP PROBE THERMOSTAT MG
CLAMP PROBE THERMISTOR MG
CLAMP PROBE HIGH LIMIT MG
FLUE GASKET MG
BALL VALVE 1-1/4 FULL PORT REVERSIBLE MG
BALL VALVE 1-1/4 FULL PORT REVERSIBLE LOCKING MG
BALL VALVE 1-1/4 FULL PORT REVERSIBLE MG
BALL VALVE 1-1/4 FULL PORT REVERSIBLE LOCKING MG
II
IIT
II
II
T (REQUIRES ITEM #9)
II
IIT
IIT
II
IIT
IIT
Exploded Parts-MGII Gas Models
II
, MGIIT LEFT- HAND
II, MGIIT LH
IIT RIGHT-HAND
IIT RH
7
L22-291 Rev 1 (06/11)
Exploded Parts-MGII Gas Models
Tank Drawing A
L22-291 Rev 1 (06/11)
8
B) BURNER ASSEMBLY
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Burner Assembly Drawing B Parts List
ITEM # PART # PART DESCRIPTION
B8042001
1
2 60147801 THERMAL-LIMIT SWITCH WITH MANUAL RESET
3
4
5
6A
6B
7
8
9 B6745502 WIRE HARNESS HIGH-LIMIT 24VAC
10 60127501 FITTING ADAPTER FLARED 15/16-16 UN-2A X 1/2 FNPT BRASS
11 60129701 FITTING 1/4 MNPT X .344-32 UNS ORIFICE TIP BRASS
12A 60132801 FITTING TEST PRESSURE PLUG 1/8-27 (CE)
12B N/A PLUG 1/8 NPT 3/16 HEX SOCKET STEEL
13
14 PP10084 SWITCH HIGH-LIMIT LCHM05030
15 P0007300 SCREW 8-32 X 1/4 INDENTED HEX HEAD ZN
16 PP10023 SCREW 10-24 X 3/8 SELF TAPPING
17 PP10687 SCREW 6-32 X 5/16 TRUSS HEAD PHILLIPS ZN
18
(INCLUDES
ITEMS 5-8,
10-12, & 16)
19
20 P0075300 SCREW 10-16 X 5/8 HEX HEAD SELF-DRILLING
N/A N/A
B8042003
B8042004
8031901-C
8032001-C
8031201
8031301
8031601
8031701
8034901-C
8031801
8034905-C
8031703
8034903-C
B8037303-C BURNER SLOTTED-FACE HIGH-EFFICIENCY NATURA L
B8041901
7513703 ORIFICE TIP 1.20mm DIA
P6071344 ORIFICE TIP #44 DIA
P6071346 ORIFICE TIP #46 DIA
P6071355 ORIFICE TIP #55 DIA
B8035602
B8035604
B8035702
B8035704
2036904-C
2036902-C
2036906-C
SELF-CLEANING BURNER RUNNER TUBE MG
SELF-CLEANING BURNER RUNNER TUBE LEFT-HAND MG
SELF-CLEANING BURNER RUNNER TUBE RIGHT-HAND MG
BRACKET HIGH-LIMIT MG
BRACKET HIGH-LIMIT MG
GASKET BURNER BRACKET MG
GASKET BURNER BRACKET MG
BURNER CROSSOVER MG
BURNER SHIELD NATURAL LEFT-HAND MG
BURNER COLLAR LP FULL LEFT-HAND MG
BURNER SHIELD NATURAL SPLIT MG
BURNER COLLAR LP SPLIT MG
BURNER SHIELD NATURAL RIGHT-HAND MG
BURNER COLLAR LP FULL RIGHT-HAND MG
BURNER INCONEL 601 WIRE-FACE SCREEN NATURAL SCB & LP
(REPLACES B8030001)
BURNER ASSEMBLY SLOT- FACE HIG H- EFFI CI ENCY N AT URAL MG
BURNER ASSEMBLY INCONEL 601 WIRE-FACE NATURAL SCB & LP MG
BURNER ASSEMBLY SLOT- FACE HIG H- EFFI CI ENCY N AT URAL MG
BURNER ASSEMBLY INCONEL 601 WIRE-FACE NATURAL SCB & LP MG
SELF-CLEANING BURNER HIGH -LIM IT BRACKET MG
SELF-CLEANING BURNER HIGH- LIM IT BRACKET LEFT-HAND MG
SELF-CLEANING BURNER HIGH-LIMIT BRACKET RIGHT-HAND MG
3M SUPER 77 MULTIPURPOSE HIGH TACK SPRAY ADHESIVE (REQUIRED
WHEN INSTALLING NEW ITEM #4)
II
T
II
II
II
T
II
T
II
Exploded Parts-MGII Gas Models
II
T
II
T
II
II
II
T
II
II
II
T
II
T
II
II
II
II
II
T
T
II
9
L22-291 Rev 1 (06/11)
Exploded Parts-MGII Gas Models
Burner Assembly Drawing B
L22-291 Rev 1 (06/11)
10
Loading...