Pioneer X-CM31-R User Manual

X-CM31

Discover the benefits of registering your product online at

http://www.pioneer.co.uk

Découvrez les nombreux avantages offerts en enregistrant votre produit en ligne maintenant sur

http://www.pioneer.fr

Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres Produktes unter http://www.pioneer.eu) Registra il tuo prodotto su http://www.pioneer.eu) e scopri subito quali vantaggi puoi ottenere! Ontdek nu de voordelen van online registratie! Registreer uw Pioneer product via

http://www.pioneer.be

Registre su producto en http://www.pioneer.eu) Descubra los beneficios de registrarse on-line: Зарегистрируйте Baшe изделие на

http://www.pioneer-rus.ru

Oзнакомь т есь с преимуществами регистрации в Интернет

-K/-W/-T/-R

(or http://www.pioneer.eu).

(ou http://www.pioneer.eu).

http://www.pioneer.de

http://www.pioneer.it

http://www.pioneer.nl -

(of http://www.pioneer.eu)

http://www.pioneer.es

(или http://www.pioneer.eu).

(oder

(o en

Operating Instructions Mode d’emploi Bedienungsanleitung Istruzioni per l’uso Handleiding Manual de instrucciones Инструкции по эксплуатации

WARNING

Store small parts out of the reach of children and infants. If accidentally swallowed, contact a doctor immediately.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_A1_En

WARNING

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

D3-4-2-1-3_A1_En

WARNING

Before plugging in for the first time, read the following section carefully.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230 V or 120 V) written on the rear panel.

D3-4-2-1-4*_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Environment

Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)

D3-4-2-1-7c*_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 25 cm at top, 15 cm at rear, and 5 cm at each side).

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.

D3-4-2-1-7b*_A1_En

This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period.

K041_A1_En

CAUTION

This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007.

CLASS 1 LASER PRODUCT

D58-5-2-2a_A1_En

CAUTION

The 

STANDBY/ON switch on this unit will not

completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power plug can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

D3-4-2-2-2a*_A1_En

Information for users on collection and disposal of old equipment and used batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

These symbols are only valid in the European Union. For countries outside the European Union:

If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

K058a_A1_En

Symbol examples

for batteries

Symbol for

equipment

If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal. The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation).

D3-4-2-2-1a_A1_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.

S002*_A1_En

Thank you for buying this Pioneer product.

Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference.

Contents

01 Before you start

What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Loading the batteries in the remote control . . . . . . . . . 5

Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . 5

02 Part names and functions

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Speaker system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Attaching the Non-skid pads . . . . . . . . . . . . . . . . . . . . . . 7

Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Top panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

03 Connections

Speaker connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting antennas . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using external antennas . . . . . . . . . . . . . . . . . . . . . . . . . 11

Plugging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

04 Getting started

To turn the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Input function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Display brightness control . . . . . . . . . . . . . . . . . . . . . . . 12

Volume auto set-in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Volume control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Muting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Sound controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Equaliser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

P.bass control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Bass/treble control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Setting the wake-up timer . . . . . . . . . . . . . . . . . . . . . . . 13

Calling the wake-up timer . . . . . . . . . . . . . . . . . . . . . . . . 14

Cancelling the wake-up timer. . . . . . . . . . . . . . . . . . . . . 14

Using the wake-up timer. . . . . . . . . . . . . . . . . . . . . . . . . 14

Using the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

05 iPod/iPhone/iPad playback

Confirming what iPod/iPhone/iPad models are

supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting your iPod/iPhone/iPad . . . . . . . . . . . . . . . 15

Connecting iPod/iPhone to the top panel . . . . . . . . . . . 15

Connecting iPad using supplied stand . . . . . . . . . . . . . 16

Watching iPod/iPhone videos on your TV . . . . . . . . . . . 16

Playing iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Playing iPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

06 Disc playback

Playing discs or files . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Advanced CD or MP3/WMA disc playback . . . . . . . . . 19

Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Programmed play (CD or MP3/WMA). . . . . . . . . . . . . . 20

About downloading MP3/WMA . . . . . . . . . . . . . . . . . . . 20

About folder playback order . . . . . . . . . . . . . . . . . . . . . . 20

Specify the folder to play. . . . . . . . . . . . . . . . . . . . . . . . . 21

Switch the display contents . . . . . . . . . . . . . . . . . . . . . . 21

07 USB playback

Playing USB storage devices . . . . . . . . . . . . . . . . . . . . 22

Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Specify the folder to play. . . . . . . . . . . . . . . . . . . . . . . . . 23

Playing in the desired order

(Programmed Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

08 Using the tuner

Listening to the radio broadcasts . . . . . . . . . . . . . . . . 24

Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Saving station presets. . . . . . . . . . . . . . . . . . . . . . . . . . . 24

To recall a memorised station . . . . . . . . . . . . . . . . . . . . 25

To scan the preset stations. . . . . . . . . . . . . . . . . . . . . . . 25

To erase entire preset memory. . . . . . . . . . . . . . . . . . . . 25

Using the Radio Data System (RDS) . . . . . . . . . . . . . . 25

An introduction to RDS. . . . . . . . . . . . . . . . . . . . . . . . . . 25

Searching for RDS programs. . . . . . . . . . . . . . . . . . . . . 25

Information provided by RDS . . . . . . . . . . . . . . . . . . . . . 26

Using the Auto Station program Memory (ASPM) . . . . 26

Notes for RDS operation. . . . . . . . . . . . . . . . . . . . . . . . . 26

09 Other connections

Connecting auxiliary components . . . . . . . . . . . . . . . . 27

10 Additional information

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Playable discs and formats . . . . . . . . . . . . . . . . . . . . . 30

Regarding copy protected CDs . . . . . . . . . . . . . . . . . . . 30

Supported audio file formats . . . . . . . . . . . . . . . . . . . . . 30

Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

When moving this unit . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Place of installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Do not place objects on this unit . . . . . . . . . . . . . . . . . . 31

About condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Cleaning the product. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Cleaning the lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Cleaning discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

About specially shaped discs. . . . . . . . . . . . . . . . . . . . . 31

About iPod/iPhone/iPad . . . . . . . . . . . . . . . . . . . . . . . . 32

Restoring all the settings to the defaults . . . . . . . . . . 32

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Before you start 01

English

Français Español

STANDBY/ON





iPod CD USB TUNER

AUDIO IN/LINE

DISPLAY FOLDER

PRESET VOLUME

ST/MONO ASPMPTY DISPLAY

MUTE

TUNE–

TUNE+

DIMMER

  







–

MEMORY /PROGRAM

123

4 5 6

789

TV OUT

CLOCK/TIMER

SLEEP

EQULIZER

P.BASS

BASS/TREBLE

RANDOM

CLEAR REPEAT

OPEN/CLOSE

RDS

ENTER

30°

7 m

30°

Chapter 1:

Before you start

• Batteries may have different voltages, even if they are the

What’s in the box

Please confirm that the following accessories are in the box when you open it.

• Remote Control

•Power cord

• AM antenna cable

• FM wire antenna

• AAA batteries (R03) x 2

• Non-skid pads x 8

•iPad stand

• Warranty card

• Operating instructions (this document)

Loading the batteries in the remote control

1 Open the rear lid and load the batteries as illustrated below.

same size and shape. Do not use different types of batteries together.

• To prevent leakage of battery fluid, remove the batteries if you do not plan to use the remote control for a long pe riod of ti me (1 mont h or m ore) . If t he fl uid s houl d lea k, wipe it carefully off the inside of the case, then insert new batteries. If a battery should leak and the fluid should get on your skin, flush it off with large quantities of water.

• When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.

• WARNING Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries.

Using the remote control

The remote has a range of about 7 m at an angle of about 30º from the remote sensor.

2 Close the rear lid.

CAUTION

• Do not use any batteries other than the ones specified. Also, do not use a new battery together with an old one.

• When loading the batteries into the remote control, set them in the proper direction, as indicated by the polarity marks ( and ).

• Do not heat batteries, disassemble them, or throw them into flames or water.

Keep in mind the following when using the remote control:

• Make sure that there are no obstacles between the remote and the remote sensor on the unit.

• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit’s remote sensor.

• Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.

• Replace the batteries when you notice a fall off in the operating range of the remote.

Part names and functions02

STANDBY/ON





iPod CD USB TUNER

AUDIO IN/LINE

DISPLAY FOLDER

PRESET VOLUME

ST/MONO ASPM PTY DISPLAY

MUTE

TUNE–

TUNE+

DIMMER

 







–

MEMORY

/PROGRAM

123

456

789

TV OUT

CLOCK/TIMER

SLEEP

EQUALIZER

P.B A S S

BASS/TREBLE

RANDOM

CLEAR REPEAT

OPEN/CLOSE

RDS

ENTER

Chapter 2:

Part names and functions

Remote control

1  STANDBY/ON

Switches the receiver between standby and on (page 18).

2 Input function buttons

Use to select the input source to this receiver (page 18).

3 CD Receiver control buttons

TV OUT

Setting iPod/iPhone video on/off.

CLOCK/TIMER

Use for setting the clock, as well as for setting and checking the timers (page 12).

SLEEP

See Using the sleep timer on page 14.

4 Numeric buttons (0 to 9)

Use to enter the number (page 19).

CLEAR

Use to clear the programmed play (page 20).

6 CD Receiver control buttons

DISPLAY

Press to change the display for songs playing back from CD or USB (page 21).

FOLDER

Use to select the folder of the MP3/WMA disc or USB mass storage device (page 20).

Use to access the menu.

MEMORY/PROGRAM

Use to memory or program the MP3/WMA disc (page 20).

7/// (TUNE +/–), ENTER

Use to select/switch system settings and modes, and to confirm actions.

Use TUNE +/– can be used to find radio frequencies (page 24).

8 PRESET control buttons

Use to select preset radio stations (page 24).

MUTE

Mutes/unmutes the sound (page 12).

10 Playback control buttons

Use to control each function after you have selected it using the input function buttons (page 18).

Part names and functions 02

English

Français Español

1 Tweeter 2Woofer 3 Bass Reflex Duct

Tuner

control buttons

ST/MONO

Use to switch the sound mode between stereo and monaural. (page 24)

RDS ASPM

Use to search for RDS Auto station program memory (page 25).

RDS PTY

Use to search for RDS program types (page 25).

RDS DISPLAY

Press to change the RDS display for information mode (page 25).

12 OPEN/CLOSE

Use to open or close the disc tray (page 18).

13 Sound control buttons

Adjust the sound quality (page 13).

14 RANDOM

Press to randomize order play setting from a CD, iPod or USB (page 19).

REPEAT

Press to change the repeat play setting from a CD, iPod or USB (page 19).

16 Volume control buttons

Use to set the listening volume (page 12).

DIMMER

Dims or brightens the display. The brightness can be controlled in four steps (page 12).

Speaker system

Important

Speaker grille cannot be removed.

Attaching the Non-skid pads

Apply the accessory non-skid pads to the bottom surfaces of the speakers.

Important

Use the speaker is usually in an upright position.

Part names and functions02

Front panel

PHONES AUDIO IN iPad

4 5 6 7 8 9

1Main display 2 Volume control

Use to set the listening volume (page 12).

3 Volume illumination

Light when the power on.

4 Headphone socket

Use to connect headphones. When the headphones are connected, there is no sound output from the speakers.

5 AUDIO IN socket

Use to connect an auxiliary component using a stereo minijack cable (page 27).

2 31

TIMER VOLUME

6 Remote sensor

Receives the signals from the remote control.

7 Disc tray

Place the disc, label side up (page 18).

TIMER

Lights when the receiver is power off with timer setting.

indicator

9 USB terminal

Use to connect your USB mass storage device or Apple iPod/ iPhone/iPad as an audio source (page 22).

Part names and functions 02

English

Français Español

STANDBY/ON



 

INPUT



PUSH OPEN

2 5

3 4

Top panel

1 iPod/iPhone connector port

To connect the iPod/iPhone, press the PUSH OPEN tab (page 15).

 STANDBY/ON

Switches the receiver between standby and on (page 18).

3 Playback control buttons

Selects the desired track or file to be played back. Use to stop the playback. Stops playback or resumes playback from the pause point.

4 INPUT

Selects the input source.

5 Disc tray open/close button

Use to open or close the disc tray (page 18).

Connections03

Left

speaker

Right speaker

This unit’s rear panel

Yellow

Video cable

(commercially available)

To video input

terminal

This unit’s rear panel

Chapter 3:

Connections

CAUTION

• Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

• Connect the power cord after all the connections between devices have been completed.

Speaker connection

To connect the speaker cord to the connector, insert into the speaker connector of the rear of the receiver.

ANTENNA VIDEO LINE

AM LOOP

FM UNBAL 75 Ω

CAUTION

• These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when

connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.

• Do not connect any speakers other than those supplied to this system.

• Do not connect the supplied speakers to any amplifier other than the one supplied with this system. Connection to any other amplifier may result in malfunction or fire.

• Do not attach these speakers to the wall or ceiling. They may fall off and cause injury.

• These speakers are magnetically shielded. However, depending on the installation location, color distortion may occur if the speaker system is installed extremely close to the screen of a television set. If this happens, turn off the television set, and then turn it on after 15 to 30 minutes. If the problem persists, move the speaker system away from the television set.

OUT IN

SPEAKERS

AC IN

Connecting a TV

• When an iPod/iPhone is connected to this unit, the TV output setting of iPod/iPhone is automatically set to ‘ON’.

Note

• Some iPod allow the TV output setting to be changed while connected.

• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone’s TV output setting returns to its original state.

VIDEO LINE

SPEAKERS

OUT IN

AC IN

Connections 03

English

Français Español

fig. a

fig. b

One-touch PAL connector

75 Ω coaxial cable

To AC outlet

This unit’s rear panel

Power cord

Connecting antennas

Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below).

ANTENNA

1 Connect the AM antenna wires.

Holding the connector to connect.

2 Fix the AM loop antenna to the attached stand.

To fix the stand to the antenna, bend in the direction indicated by the arrow (fig. a) then clip the loop onto the stand (fig. b).

3 Place the AM antenna on a flat surface and in a direction giving the best reception.

4 Connect the FM wire antenna into the FM antenna socket.

For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.

LOOP

FM UNBAL 75 Ω

Using external antennas

To improve FM reception

Use a PAL connector (not supplied) to connect an external FM antenna.

ANTENNA

FM UNBAL 75 Ω

Plugging in

Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.

After you’ve finished making all connections, plug the unit into an AC outlet.

VIDEO LINE

SPEAKERS

OUT IN

CAUTION

• Do not use any power cord other than the one supplied with this unit.

• Do not use the supplied power cord for any purpose other than that described below.

AC IN

+ 23 hidden pages