Pioneer V7400 User Manual

PIONEER V7400 DVD PLAYER

REMOTE CONTROL PANEL SOFTWARE

Written by Dejan Seke

Email: [e-mail]

August 2002.

INSTALATION

1. Make a folder on any drive (i.e. C:\DVDinstall)

2. Make subfolder called Support (i.e. C:\DVDinstall\Support)

3. Unzip root.zip to made folder

4. Unzip sub.zip to made subfolder

5. Run setup.exe from main folder

DESCRIPTION

The Pioneer DVD V7400 Remote Control Panel software gives independent manual control of up
to four DVD V7400 players. The players are connected to a PC through its com ports. Player’s
hardware buttons and functions of the interface at the back of the player are still operational.

FEATURES

1. Basic commands: Play, Still, Pause, Scan and Step (Stop not included as a safety feature)

2. Go To function by frame number or time that allows easy cueing to a certain point on the disk

3. 24-hour timer with one-second resolution

4. Displays current DVD information: frame number, time, remaining title time, title, chapter,
and mode. The information is always correct, no matter if DVD player is controlled by this
software or its hardware buttons or interface

5. Selectable Step/Half Play Speed option for Reverse and Forward buttons

6. Skip buttons with selectable Title/Chapter option

7. Has a selectable 25/30/Auto frame rate option for time calculation

8. Play Only option as a safety feature that will disable all commands except for the Play button

9. Allows naming each DVD frame for easier title tracking

10. Has three viewing modes: standard, dual and compact

2