Pioneer SHTD-520 Service manual
Surround
Front
Sub Woofer
Center
ORDER NO.
RRV2600
SPEAKER SYSTEM
S-HTD520 XTW/UC
65S
This service manual is intended for qualified service technicians; it is not meant
for the casual do-it-yourselfer. Qualified technicians have the necessary test
equipment and tools, and have been trained to properly and safely repair complex
products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability
of the product and may void the warranty. If you are not qualified to perform the
repair of this product properly and safely, you should not risk trying to do so and
refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals
which are known to the state of California to cause cancer, birth defects or other
reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
(Front SP)
The cosmetic baffle is attached to the cabinet by its bosses. To
detach it, pry it open by inserting a flat blade screwdriver into
lower slot. To attach it, press it to the baffle.
The woofer is attatched to the baffle by 4 external screws. To
detach it ,unfasten those screws. When attaching it, face its terminal downward.
The tweeter is attached to the baffle by 2 external screws. To
detach it ,unfasten those screws. When attaching it, face its terminal downward.
(Sub Woofer)
The woofer is attached to the rear baffle by 4 external screws.
To detach it ,unfasten those screws. When attaching it, face its
terminal rightward.
(Center SP)
The grille Assy is attached to the cabinet by 8 screws.
To detach it, unfasten those screws.
The speaker unit, together with the grille Assy, is atached to the
cabinet by 4 external screws. To detach it, unfasten those
screws. To detach it, first remove the cabinet. Then remove the
speaker unit. When attaching it, face its terminal toward the
input terminal.
(Surround Speaker)
The grille Assy is attached to the cabinet by 4 screws. To detach
it, unfasten those screws.
The speaker unit, together with the grille Assy, is attached to
the cabinet by 4 external screws. To detach it, unfasten those
screws. To detach it, first remove the cabinet. Then remove the
speaker unit. When attaching it, face its terminal toward the
input terminal.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2002
T-ZZM MAY. 2002 Printed in Japan
S-HTD520
PARTS LIST
NOTES:
Mark No. Description Part No.
NSP CS Assy(Front SPx2) SMW1699
NSP CS Assy(Sub WF) SMW1700
NSP CS Assy(Center SP) SMW1701
NSP CS Assy(Surr. SPx2) SMW1702
For Packing
NSP Wire Set SEA1562
NSP Polyethylene Bag SHL1251
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Speaker Wire (White) SDS1108
Speaker Wire (Red) SDS1109
Speaker Wire (Blue) SDS1110
Speaker Wire (Gray) SDS1111
Speaker Wire (Green) SDS1112
Speaker Wire (Purple) SDS1113
Non Skid Pads SEP1240
Top Protector SHA2338
Middle Protector SHA2339
Bottom Protector SHA2340
Protection Sheet (Front) SHC1773
Protection Sheet (Sub WF) SHC1774
Packing Case SHG2423
Polyethylene Bag (for Surr. SP) SHL1252
Polyethylene Bag (for Center SP) SHL1338
Sub WF
Mark No. Description Part No.
NSP Model Label SAN3100
Center SP
Speaker A14LU83-51F
Screw BYC40P140FZB
CS Cord SDD1301
Non Skid Pad SEC1473
Gasket SEC1527
Input Terminal SKX1060
Cosmetic Bafle SNK2628
Mark No. Description Part No.
NSP Badge 23 SAM1490
NSP Grille Cloth SAS1527
NSP Baffle SNK2593
NSP Cabinet SNK2594
NSP Model Label SAN3101
NSP Acoustic Absorbent SMV1995
Grille Assy SMG1758
Speaker Wire SDD1312
Packing SEC1479
Input Terminal SKX1062
Front SP
Mark No. Description Part No.
Grille Assy SMG1757
NSP Badge 23 SAM1490
NSP Grille Cloth SAS1526
NSP Grille frame SMH1049
Cosmetic Baffle SNK2595
NSP Cabinet SMM1967
NSP Model Label (L) SAN3098
NSP Model Label (R) SAN3099
NSP Acoustic Absorbent SMV2117
Network Assy SWN1693
Input Terminal SKX1060
Speaker (Woofer) W10DC61-56F
Speaker (Tweeter) E52AP39-61F
Screw (for Woofer,Tweeter ) BYC40P140FZB
Speaker D87DU61-52D
Screw (for Baffle - Cabinet) BPZ40P100FZB
Surround SP
Mark No. Description Part No.
NSP Badge 23 SAM1490
NSP Grille Cloth SAS1528
NSP Baffle SNK2549
NSP Cabinet SNK2548
NSP Model LAbel (L) SAN3102
NSP Model LAbel (R) SAN3103
NSP Acoustic Absorbent SMV1995
NSP Caution Label SRW1075
Grille Assy SMG1759
Fung Nut M5 SBN1044
Speaker Wire SDD1275
Packing SEC1479
Input Terminal SKX1062
Speaker D87DU61-52D
Screw (for Baffle - Cabinet) BPZ40P100FZB
2
Loading...