Pioneer SDV-252-SW Service manual
SPEAKER SYSTEM
Subwoofer
ORDER NO.
RRV3405
S-DV252SW
XJC/E
S-DV252SW XJC/NC
1. FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
SUBWOOFER
The speaker unit is attached to the back board by 4 external
screws. To detach it, unfasten those screws. When attaching it,
face its terminal rightward.
The cosmetic baffle assy is attached to the baffle board by its
bosses applied with adhesive. To detach it, pry it open by inserting a flat blade screwdriver into lower slot. To attach it, apply adhesive to the holes on the baffle board. Then press it to
the baffle board.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
T – ZZS MAY 2006 Printed in Japan
1
N
23
2. EXPLODED VIEWS AND PARTS LIST
4
A
OTES:
2.1 PACKING
B
C
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
2
3 (2/2)
1
3 (1/2)
4
3 (1/2)
3 (2/2)
D
PACKING Parts List
Mark No. Description Part No.
NSP 1 Subwoofer SMW1937
5
E
NSP 2 Accessory Set SME6074
Speaker Cable (SW: Purple) SDS1179
Non Skid Pad (for Subwoofer) SEC2070
Polyethylene Bag S1 SHL1352
3 Protector SHA6114
4 Protection Sheet SHC1821
for XJC/E type
5 Packing Case SHG6217
NSP Model Label SAN6359
for XJC/NC type
5 Packing Case SHG6232
NSP Model Label SAN6395
F
2
1234
S-DV252SW
Loading...