Pioneer SDA-BS100 Specification Sheet

SDA-BS100

FEATURES

Add-On Blind Spot Detection System - License Plate Bar-Type for Universal Application

• License Plate Bar with built-in radar sensors

• High accuracy digital microwave radar technology

• Interior audible and LED indicator alerts

• GPS unit for speed sensing

• License Plate Bar is IPX6 and IPX7 rated

• LED indicators with pre-installed silver color covers (black covers also included)

• 3-year limited warranty

GPS Antenna

License Plate Bar

The Pioneer Blind Spot Detection System (BSD) SDA-BS100 is designed to assist in detecting vehicles entering your vehicle’s blind spot zone*. While driving, the system detects objects entering your blind spot zone around the rear of your vehicle and in the lanes on the left and right of the vehicle with an approximate detection range of up to 50 feet. When you’re slowly backing out of a parking spot ordriveway, cross traic approaching from your left or right entering your blind spot zone will activate the buzzer and the LED indicator(s) to signal the direction of approaching vehicles and warn the driver.

GPS Antenna Included

This SDA-BS100 comes with a GPS antenna, which is used to calculate your vehicle’s moving speed. On startup, it may take up to 2 minutes to engage; once engaged, both LED indicators will flash twice to indicate the GPS system has been activated. There are 4 speed sensing thresholds. The factory default is set to detect and warn at threshold speeds at or above 20-mph. At speeds under the 20-mph threshold, objects will not be detected.

License Plate Bar Installation

Installation requires the License Plate Bar be positioned horizontal to the road for eective detection. Mounting wedges are provided to achieve the horizontal position when needed. The SDA-BS100 License Plate Bar must be installed on the center rear of the vehicle for sensor detection to function properly. For this reason, license plates designed towards the right or left side of the vehicle are not suited for the SDA-BS100. Because license plates may vary in configuration from state to state, the SDA-BS100 can be mounted above or below the license plate.

IPX6 and IPX7 Rating

The SDA-BS100 License Plate Bar with built-in microwave sensors has an IPX6 and IPX7 rating. However, the Control Unit is not waterproof and requires installation inside the vehicle.

Blind Spot Reading Accuracy

Situations which may aect the SDA-BS100’s reading accuracy include

• When metal objects are in the direct path of the sensing signal.

• Weather such as heavy rain and snow, and icy road conditions, which can cause changes in sensitivity.

• Gravel roads, which may cause interference due to dust, debris, or foreign objects.

Blind Spot’s Eectiveness

The SDA-BS100 may be compromised in its eectiveness

• When towing or when a permanent trailer is aached.

• On vehicles with metal obstructions in front of the license plate, such as a spare tire mount,

rear bike racks etc.

• Where standard license plates are mounted on the right or left side of the vehicle

(Center Installation Required)

SDA-BS100

Blind Area Blind Area

Reverse Cross Traic Alerts

Features

Sensor Information

General

License Plate Bar with Congurable Radar Sensor

Ingress Protection Rating

Compatability

GPS Antenna

Detection Range

Speed Range

Speed Accuracy

Speed Restriction

Approached by Vehicles

Following By Vehicles

Overtaking Vehicles

Operating Voltage

Working Current

Working Temperature

FUSE Rating

Mounting Location

Main Harness

Main Control Unit

Sensor Cables

LED Extension Cable

LED Indicator

LED Indicator Lens

LED Indicators

Model No SDA-BS1 SDA-BS100 SDA-BS900

Limited

Type

Warranty

Speaker

GPS Tieline

Wedges

Control Unit with license Bar Radar Sensors Control Unit with license Bar Radar Sensors Bumper Radar Sensors

License Plate Bar: IPX6/IPX7 License Plate Bar: IPX6/IPX7 Radar Sensor: IPX6/IPX7

4 Adjustable Seings; 5 mph, 10 mph, 15 mph,

Center installation required

Separate Sensor Module Included Separate Sensor Module Included Sensor Module Built-In

No Yes Yes

3 Year Limited 3 Year Limited 3 Year Limited

---- ---- ----

Yes Yes Yes

52 ° (Horizontal) 52 ° (Horizontal) 70 ° (Horizontal)

0.5 mph ~ 37 mph 0.5 mph ~ 37 mph 0.5 mph ~ 37 mph

<0.5 mph <0.5 mph <0.5 mph

20 mph (default)

Direction of Movement and Detection Range

1’ ~ 50’ 1’ ~ 50’ (-)6.5’ ~ 82’

NA NA (-)6.5’ ~ 82’

9 ~ 18 V 9 ~ 18 V 9 ~ 18 V

<100mA <100mA 400mA

(-) 4 ° F ~ 158 ° F (-) 4 ° F ~ 158 ° F (-) 40 ° F ~ 185 ° F

2A 2A 2A

Rear License Plate

1 Piece 1 Piece 1 set

1 Set 1 Set 1 Set

1 Piece 1 Piece NA

NA NA 1 Piece

1 Set 1 Set 1 Set

2 Pieces (black) 2 Sets (2 Black and 2 Silver) 2 Sets (2 Black and 2 Silver)

5°, 10°, and 15° 5°, 10°, and 15° NA

4 Adjustable Seings; 5 mph, 10 mph, 15 mph,

20 mph (default)

Rear License Plate

Center installation required

Right and Left Rear Bumper Corners

>= 18 mph

For full specifications and other Pioneer products, visit www.pioneerelectronics.com

* THIS PRODUCT FUNCTIONS AS AN AID FOR NOTIFYING THE PRESENCE OF OBSTACLES IN VEHICLE BLIND SPOTS. IT DOES NOT DETECT ALL DANGERS AND OBSTACLES AND IS NOT A SUBSTITUTE FOR YOUR JUDGEMENT AND CAREFUL ATTENTION. BEFORE ANY MANEUVER, VISUALLY CHECK BOTH SIDES OF THE VEHICLE TO CONFIRM.

This device is rated IPX6 and IPX7 using the Ingress Protection rating system. The device has been tested in a controlled environment and shown to be water resistant in certain circumstances and meets the requirements of the classification IPX6 and IPX7 as described by the international standard IEC 60529 - Degrees of Protection provided

by Enclosures [IP Code]. Despite this classification, the device is not resistant to water damage in every situation.

Information provided for reference only and does not imply guaranteed compatibility with each model year of the vehicles shown. Consult your Authorized Pioneer Dealer to confirm vehicle compatibility.

PIONEER and the Pioneer logo are trademarks or registered trademarks of Pioneer Corporation.

All other brand, product names, or logos are trademarks or registered trademarks of their respective holders.

Protect your investment. Purchase from an Authorized Pioneer Dealer. Only products purchased from an Authorized Pioneer Dealer (or

Authorized Pioneer Internet Dealer) qualify for the manufacturer’s warranty and manufacturer’s rebates. Pioneer Electronics (USA) Inc. proudly supports and encourages you to support the Consumer Technology Association (CTA), Mobile Electronics Certification Program (MECP) for installers and the Specialty Equipment Market Association (SEMA).

Pioneer Electronics (USA) Inc., Post Oice Box 1760, Long Beach, California 90801

Pioneer Customer Service Department: 1-800-PIONEER

Note: Specifications, designs, and user interfaces are subject to modification without notice. Product colors and illumination may dier in photographs from actual appearance due to eects of printing and photography.

CHECK OUT MORE AT

PIONEERELECTRONICS.COM/CAR

FACEBOOK.COM/PIONEERNORTHAMERICA

INSTAGRAM.COM/PIONEERCARAUDIO

TWITTER.COM/PIONEERUSA

YOUTUBE.COM/PIONEERELECTRONICS