Pioneer XV-BD707, S-BD30, HTZ-BD50, S-BD50T, HTZ-BD30 User Manual

...

Download

ENGLISH FRANÇAIS

http://www.pioneerelectronics.com (US) http://www.pioneerelectronics.ca (Canada)

･ Protect your new investment

The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft.

･ Improve product development

Your input helps us continue to design products that meet your needs.

･ Receive a free Pioneer newsletter

Registered customers can opt in to receive a monthly newsletter.

･ Receive free tips, updates and service bulletins on your new product

HTZ-BD50

XV-BD707

S-BD50T

S-BD50SW

HTZ-BD30

XV-BD707

S-BD30

Blu-ray Disc surround system | Système de cinéma maison Blu-ray Disc

Blu-ray Disc receiver | Récepteur Blu-ray Disc

Speaker System | Enceintes acoustiques

Speaker System (Only subwoofer) | Enceinte acoustique

Blu-ray Disc surround system | Système de cinéma maison Blu-ray Disc

Blu-ray Disc receiver | Récepteur Blu-ray Disc

Speaker System | Enceintes acoustiques

P/NO: MFL65220807

2 Safety Information

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning  ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of su cient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Cautions and Warnings

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a con ned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

CAUTION: This product is a class 1 laser product classi ed under the Safety of laser products, IEC60825-1:2007. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center.

Use of controls, adjustments or the performance of procedures other than those speci ed herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

3Safety Information

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the speci cation page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or  re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

WARNING: To prevent a  re hazard, do not place any naked  ame sources (such as a lighted candle) on the equipment.

This device is equipped with a portable battery or accumulator.

Safety way to remove the battery or the battery from the equipment: Remove the old battery

or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine,  re or the like.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects  lled with liquids, such as vases, shall be placed on the apparatus.

When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

Notes on Copyrights

• Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.

• Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for BD format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact an authorized Customer Service Center.

• Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.

• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.

• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programmes, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/or criminal liability.

Safety Information

4 Safety Information

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

Safety Information

and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION : Any changes or modi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC RF Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.9 inch) between the radiator and your body. End users must follow the speci c operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CAUTION: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments.

WARNING: Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other govermmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling !

This Class B digital apparatus complies with Canadian ICES-003 “To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.” Operation is subject to the following two conditions : (1) This device may not cause Interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

5Safety Information

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not  t into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speci ed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14. Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without a ecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.

• Slowly increase the sound until you can hear it

comfortably and clearly, without distortion.

• Once you have established a comfortable sound

level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES.

• Do not turn up the volume so high that you can’t

hear what’s around you.

• Use caution or temporarily discontinue use in

potentially hazardous situations.

• Do not use headphones while operating a

motorized vehicle; the use of headphones may create a tra c hazard and is illegal in many areas.

Safety Information

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

Contents

Installation

16 Assemble the speakers 16 Speaker Setup for HTZ-BD50

Safety Information

2 Cautions and Warnings 5 IMPORTANT SAFETY

INSTRUCTIONS

Preparation

8 Introduction 8 About the “

Display 8 Symbols Used in this Manual 9 Supplied Accessories 10 Playable Discs 11 File compatibility 12 Regional Code 12 AVCHD (Advanced Video

Codec High De nition) 12 Certain System Requirements 12 Compatibility Notes 13 Remote control 14 Front panel 15 Rear panel

” Symbol

18 Speaker Setup for HTZ-BD30 19 Wall mounting the center speaker 19 Additional notes on speaker 20 Positioning the system 21 Connecting to Your TV 21 HDMI Connection 22 Component Video

23 Video Connection 23 Resolution Setting 24 Antenna connection 24 Connections with external device 24 AUX Connection 25 PORTABLE IN connection 25 OPTICAL IN 1/2 connection 26 Bluetooth® connection 28 Connecting to your Home Network 29 Network Setup 31 USB device connection 32 Settings 32 Adjust the Setup Settings 33 [DISPLAY] Menu 34 [LANGUAGE] Menu 35 [AUDIO] Menu 36 [LOCK] Menu 37 [NETWORK] Menu 37 [OTHERS] Menu 39 Sound E ect

Connection

Operation

40 General Playback 42 Advanced Playback 44 On-Screen display 48 Enjoying BD-LIVE 49 Playing movie  le and VR discs 51 Viewing a photo 53 Listening to music 56 Playing the iPod 58 Radio Operations 59 Playing content via your home

network

Maintenance

63 Notes on Discs 63 Handling the Unit

Troubleshooting

64 General 65 Picture 65 Sound 66 Network

Appendix

67 Controlling a TV with the Supplied

Remote Control 68 Area Code List 69 Language code List 70 Video output resolution 71 Trademarks and Licences 73 Speci cations 75 Open source software notice

8 Preparation

2 Preparation

Introduction

Preparation

About the “ ” Symbol Display

“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that speci c media.

Symbols Used in this Manual

NOTE

Indicates special notes and operating features.

CAUTION

Indicate cautions for preventing possible damages from abuse.

A section whose title has one of the following symbols are applicable only to the disc represented by the symbol.

DVD

AVCHD

ACD

MOVIE

MUSIC

PHOTO

BD-ROM disc

DVD-Video, DVD±R/RW in Video mode or VR mode and  nalized

DVD±R/RW in AVCHD format

Audio CDs

Movie  les

Music  les

Photo  les

9Preparation

Supplied Accessories

Video cable (1) Remote control (1)

Battery (1) FM antenna (1)

iPod cradle (1)

Accessaries of speaker box (S-BD50T)

Color-coded Speaker cables (5)

Screws (12)

Accessaries of speaker box (S-BD50SW)

Speaker cable (1) Large non-skid pads

(1)

Accessaries of speaker box (S-BD30)

Color-coded Speaker cables (6)

Large non-skid pads (1)

Small non-skid pads (1)

Preparation

Speaker stand bases (4)

Middle non-skid pads (1)

Small non-skid pads (1)

10 Preparation

Playable Discs

Preparation

Blu-ray Disc

- Discs such as movies that can

be purchased or rented.

- BD-R/RE discs that contain

vie, Music or Photo  les.

DVD-VIDEO 8 / 12 cm disc Discs such as movies that can be purchased or rented.

DVD±R 8 / 12 cm disc

- Video mode and  nalized only

- Supports the dual layer disc

also

- Finalized AVCHD format

- DVD±R discs that contain

Movie, Music or Photo  les

DVD-RW 8 / 12 cm disc

- VR mode, Video mode and

 nalized only

- Finalized AVCHD format

- DVD-RW discs that contain

Movie, Music or Photo  les.

DVD+RW 8 / 12 cm disc

- Video mode and  nalized only

- AVCHD format

- Finalized AVCHD format

- DVD+RW discs that contain

Movie, Music or Photo  les.

Audio CD 8 / 12 cm disc

CD-R/RW 8 / 12 cm disc

- CD-R/RW discs that contain

audio titles, Movie, Music or Photo  les.

NOTE

• Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW ) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

• Depending on the recording software & the  nalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.

• BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

• If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

• This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality.

• Pre-recorded DVDs are automatically set to these standards. There are many di erent types of recordable disc formats (including CD-R containing MP3 or WMA  les) and these require certain pre-existing conditions to ensure compatible playback.

• Customers should note that permission is required in order to download MP3 / WMA  les and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

11Preparation

File compatibility

Overall

Available File extensions:

“.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, “.wma”, “.wav”

• Available  le extensions di er depending on the DLNA servers.

• Some “.wav”  les are not supported on this player.

• The  le name is limited to 180 characters.

• Depending on the size and number of the

, it may take several minutes to read the

 les contents on the media.

Maximum Files/Folder: Less than 2 000 (total number of  les and folders)

CD-R/RW, DVD±R/RW, BD-R/RE Format:

ISO 9660+JOLIET, UDF and UDF Bridge format

MOVIE

Available resolution size:

1 920 x 1 080 (W x H) pixels Playable subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)

• VobSub (.sub) is not available in the [Home Link] feature.

Playable Codec format: “DIVX3.xx”, “DIVX4. xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback only), H.264/MPEG-4 AVC, MPEG1 SS, MPEG2 PS, MPEG2 TS Playable Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC”, “AC3”

• Not all the WMA and AAC Audio formats are compatible with this unit.

Sampling frequency: between 32 kHz to 48 kHz (WMA), between 16 kHz to 48 kHz (MP3) Bit rate: between 20 kbps to 320 kbps (WMA), between 32 kbps to 320 kbps (MP3)

NOTE

• HD movie  les contained on the CD or USB

1.0/1.1 may not played properly. BD, DVD or USB

2.0 are recommended to play back HD movie  les.

• This player supports H.264/MPEG-4 AVC pro le Main, High at Level 4.1. For a  le with higher level, the warning message will appear on the screen.

• This player does not support the  les that are recorded with GMC encoding techniques in MPEG4 standard, like DivX or XVID have.

*1 GMC – Global Motion Compensation *2 Qpel – Quarter pixel

or Qpel

. Those are video

MUSIC

Sampling frequency: between 8 kHz to 48 KHz (WMA), between 11 kHz to 48 kHz (MP3) Bit rate: between 8 kbps to 320 kbps (WMA, MP3),

NOTE

• This unit cannot support the ID3 Tag embedded MP3  le.

• The total playback time indicated on the screen may not be correct for VBR  les.

PHOTO

Recommended size:

Less than 4,000 x 3,000 x 24 bit/pixel Less than 3,000 x 3,000 x 32 bit/pixel Less than 4 MByte/ le

• Progressive and lossless compression photo image  les are not supported.

Preparation

12 Preparation

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.

AVCHD (Advanced Video Codec High De nition)

Preparation

• This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders.

• The AVCHD format is a high de nition digital video camera format.

• The MPEG-4 AVC/H.264 format is capable of compressing images at higher e ciency than that of the conventional image compressing format.

• Some AVCHD discs use the “x.v.Color” format.

• This player can playback AVCHD discs using “x.v.Color” format.

• Some AVCHD format discs may not play, depending on the recording condition.

• AVCHD format discs need to be  nalized.

• “x.v.Color” o ers a wider color range than normal DVD camcorder discs.

Certain System Requirements

For high de nition video playback:

• High de nition display that has COMPONENT or HDMI input jacks.

• BD-ROM disc with high de nition content.

• HDMI or HDCP capable DVI input on your display device is required for some content (as speci ed by disc authors).

• For up-conversion of standard de nition DVD, a HDMI or HDCP capable DVI input on your display device is required for copy protected content.

Compatibility Notes

• Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center.

• Viewing high-de nition content and upconverting standard DVD content may require a HDMI-capable input or HDCPcapable DVI input on your display device.

• Some BD-ROM and DVD discs may restrict the use of some operation commands or features.

• You can use a USB device that is used to store some disc related information, including downloaded on-line content. The disc you are using will control how long this information is retained.

Remote control

13Preparation

• • • • • • • • • a • • • • • • • • •

(STANDBY/ON): Switches the

player ON or OFF.

OPEN/CLOSE: Opens and closes

the disc tray.

INPUT/TUNER: Changes input

mode. BT AUDIO: Changes input mode to

BT AUDIO directly. OPTICAL: Changes input mode to

optical directly.

DISPLAY: Displays or exits On-

Screen Display.

HOME MENU: Displays or exits

the [Home Menu]. MENU: Accesses the menu on a

disc. Direction buttons: Selects an

option in the menu.

ENTER: Acknowledges menu

selection.

Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert a R03 (size AAA) battery with and matched correctly.

TUNE (+/-): Tunes in the desired radio station.

PRESET: Selects programme of Radio.

• • • • • • • • • b • • • • • • • • •

RETURN: Exits the menu or

resumes playback. POPUP/ TOP MENU: Displays the

DVD title menu or BD-ROM’s popup menu, if available.

STOP: Stops playback.

PLAY: Starts playback.

PAUSE/STEP: Pauses playback

X ./>

or previous chapter / track /  le.

m/M

backward or forward. SPK LEVEL: Sets the sound level of

desired speaker.

SKIP: Goes to the next

SCAN: Searches

USB REC: Records an audio CD.

MUTE: Mute the unit. SOUND: Selects a sound e ect

mode. VOL +/- : Adjusts speaker volume.

• • • • • • • • • c • • • • • • • • •

0-9 numerical buttons: Selects numbered options in a menu.

MARKER: Marks any point during playback.

SEARCH: Displays or exits the search menu.

REPEAT: Repeats a desired

section or sequence. CLEAR: Removes a mark on the

search menu or a number when setting the password.

DIMMER: Dims the light on the unit.

ZOOM: Accesses the zoom menu. Colored (A, B, C, D) buttons: Use

to navigate on menus.

- D button: Selects MONO or

STEREO in FM mode.

TV Control Buttons: See page 67. SLEEP: Sets a certain period of time

after which the unit will switch to o .

Preparation

14 Preparation

Front panel

Preparation

Disc Tray

Operation buttons

STANDBY/ON Button

(OPEN/CLOSE)

FUNCTION

Changes the input source or function

B/X

(PLAY / PAUSE)

(STOP)

./>

(SKIP)

- TUNE + (Radio tuning)

3 4 5 6 7

Remote sensor

Display window

PORTABLE IN

USB Port

Volume control

Rear panel

1 2 3 4 5

15Preparation

Preparation

6 7 8 9 10 11

AC Power cord

Plug into the power source.

Speakers connectors

Cooling Fan

Antenna Connector

VIDEO OUT

AUX (L/R) INPUT

COMPONENT VIDEO (Y PB PR)

OUTPUT (PROGRESSIVE SCAN)

OPTICAL IN 1(TV) / 2

iPod (24 pin)

Connect to the furnished iPod cradle.

HDMI OUT (type A, Version 1.3)

Connect to TV with HDMI inputs.

LAN port

16 Installation

3 Installation

Assemble the speakers

Speaker Setup for HTZ-BD50

Installation

Preparing the speakers

1. Attach the non-skid pads to the base of

each speaker stand bases, the subwoofer and the center speaker.

For speaker stand bases:

Use the supplied adhesive to attach four middle pads to the base (bottom) of each speaker stand base.

middle non-skid pads

For subwoofer:

Use the supplied adhesive to attach four large pads to the base of subwoofer.

For center speaker:

Use the supplied adhesive to attach four small pads to the base of center speaker.

small non-skid pads

2. Attach the speaker stand bases to the stems using the screws provided.

Once you have aligned the stem and base,

secure with the small screws at the points shown below. Note that the speaker should face in the direction of the base of the isosceles triangle.

Rear

large non-skid pads

Front

17Installation

3. Connect the wires to the player.

Connect the white wire with gray line into

(+) side and the other wire into (–) side. To connect the cable to the player, press each plastic  nger pad to open the connection terminal. Insert the wire and release the  nger pad.

Colored (+)

CAUTION

• Do not connect any speakers other than those supplied to this system.

• Do not connect the supplied speakers to any ampli er other than the one supplied with this system. Connection to any other ampli er may result in malfunction or  re.

Securing your front and surround speakers

Secure each of the front and surround speakers using the plastic catch provided. Screw two supporting hooks into the wall behind the speaker. Pass a thick cord around the hooks and through the plastic catch so that the speaker is stabilized (make sure to test that it supports the weight of the speaker). After installing, make sure the speaker is securely  xed.

Installation

thick cord

Plastic catch

CAUTION

• The plastic catch is not a mounting  xture, and the speaker should not be hung directly from the wall using this catch. Always use a cord when stabilizing the speaker.

• Pioneer disclaims all responsibility for any losses or damage resulting from improper assembly, installation, insu cient strength of the installation materials, misuse, or natural disasters.

• When placing this unit, ensure that it is  rmly secured and avoid areas where it may be likely to fall and cause injury in the event of a natural disaster (such as an earthquake).

18 Installation

Speaker Setup for HTZ-BD30

Preparing the speakers

1. Attach the non-skid pads to the base of

each speaker.

For speaker stand bases:

Use the supplied adhesive to attach four middle pads to the base (bottom) of each speaker stand base.

small non-skid pads

Installation

For subwoofer:

Use the supplied adhesive to attach four large pads to the base of subwoofer.

large non-skid pads

For center speaker:

Use the supplied adhesive to attach four small pads to the base of center speaker.

small non-skid pads

2. Connect the wires to the player.

Connect the white wire with gray line into

(+) side and the other wire into (–) side. To connect the cable to the player, press each plastic  nger pad to open the connection terminal. Insert the wire and release the  nger pad.

19Installation

Wall mounting the center speaker

The center speaker have a mounting hole which can be used to mount the speaker on the wall.

Before mounting

Remember that the speaker system is heavy and that its weight could cause the screws to work loose, or the wall material to fail to support it, resulting in the speaker falling. Make sure that the wall you intend to mount the speakers on is strong enough to support them. Do not mount on plywood or soft surface walls.

Mounting screws are not supplied. Use screws suitable for the wall material and support the weight of the speaker.

CAUTION

• If you are unsure of the qualities and strength of the wall, consult a professional for advice.

• Pioneer is not responsible for any accidents or damage that result from improper installation.

Additional notes on speaker

Install the main front left and right speakers at an equal distance from the TV.

Precautions:

Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any of the bare speaker wire touches the back panel it may cause the power to cut o as a safety measure.

The front, center and surround speakers supplied with this system are magnetically shielded. However, depending on the installation location, color distortion may occur if the speaker is installed extremely close to the screen of a television set. If this case happens, turn the power switch of the television set OFF, and turn it ON after 15 min. to 30 min. If the problem persists, place the speaker system away from the television set.

The subwoofer is not magnetically shielded and so should not be placed near a TV or monitor. Magnetic storage media (such as  oppy discs and tape or video cassettes) should also not be kept close to the subwoofer.

Do not attach the front/surround speakers and subwoofer to a wall or ceiling. They may fall o and cause injury.

Installation

Mounting screw

(not supplied)

5 mm to 7 mm

5 mm

10 mm

20 Installation

Positioning the system

The following illustration shows an example of positioning the system. Note that the illustrations in these instructions di er from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (

Installation

Front left speaker (L)/ Front right speaker (R):

Place the front speakers to the sides of the monitor or screen and as  ush with the screen surface as possible.

Center speaker:

Place the center speaker above or below the monitor or screen.

Surround left speaker (L)/ Surround right speaker (R):

Place these speakers behind your listening position, facing slightly inwards.

Subwoofer:

The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall re ections.

Unit

CAUTION

• Be careful to make sure children do not put their hands or any objects into the *subwoofer duct. *subwoofer duct: A hole for plentiful bass sound on subwoofer cabinet (enclosure).

• Place the center speaker at a safe distance from the child’s reach. Otherwise it may result in the speaker falling down and causing personal injury and/or property damage.

• The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen.

21Installation

Connecting to Your TV

Make one of the following connections, depending on the capabilities of your existing equipment.

• HDMI connection (pages 21-22)

• Component Video connection (page 22)

• Video connection (page 23)

NOTE

• Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.

• Please refer to the manuals of your TV, stereo system or other devices as necessary to make the best connections.

• Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel.

• Do not connect your player via your VCR. The image could be distorted by the copy protection system.

HDMI Connection

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable(Type A, Version 1.3). Connect the HDMI OUT jack on the player to the HDMI IN jack on a HDMI compatible TV or monitor.

HDMI Connection

Player

Installation

Set the TV’s source to HDMI (refer to TV’s

s manual).

Owner’

22 Installation

NOTE

• Changing the resolution when the connection

has already been established may result in malfunctions. To solve the problem, turn o the player and then turn it on again.

• When the HDMI connection with HDCP is not

veri ed, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.

• If there is noise or lines on the screen, please

check the HDMI cable (length is generally limited to 4.5 m and use a high speed HDMI cable (version 1.3).

• If a connected HDMI device does not accept the

Installation

audio output of the player, the HDMI device

’s audio sound may be distorted or may

not output.

• When you use HDMI connection, you can

change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 23.)

• Select the type of video output from the HDMI

OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 34).

• When you connect a HDMI or DVI compatible

device make sure of the following:

- Try switching o the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

- The connected device’s video input is set correctly for this unit.

- The connected device is compatible with

720x576p (480p), 1280x720p, 1920x1080i or 1920x1080p video input.

• Not all HDCP-compatible HDMI or DVI devices

will work with this player.

- The picture will not be displayed properly with non-HDCP device.

- This player does not playback and TV screen is changed to black screen.

Component Video Connection

Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using Y Pb Pr cables. You can hear the sound the through the system’s speaker.

Component Connection

Player

VIDEO

AUX

COMPONENT

VIDEO

INPUT

OUTPUT

Green

Green Blue

Blue

Red

NOTE

When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 23.)

23Installation

Video Connection

Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.

Video Connection

Player

VIDEO

AUX

COMPONENT

VIDEO

INPUT

OUTPUT

Yellow

Resolution Setting

The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu.

1. Press HOME MENU (

2. Use I/

i/U/u

to select the [Setup] and

press ENTER (

3. Use U/u to select [DISPLAY] option then

press i to move to the second level.

4. Use U/u to select the [Resolution] option

then press ENTER ( third level.

5. Use U/u to select the desired resolution

then press ENTER ( selection.

). The [Setup] menu appears.

) or i to move to the

) to con rm your

Installation

NOTE

• If your TV does not accept the resolution you have set on the player, you can set resolution to 576p (480p) as follows:

1. Press Z to open the disc tray.

2. Press x for more than 5 seconds.

• Since several factors a ect the resolution of video output, see “Video Output Resolution” on page 70.

24 Installation

Antenna connection

Connect the supplied antenna for listening to the radio.

Antenna Connection

Installation

Player

Connections with external device

AUX Connection

You can enjoy the sound from an external component through the speakers of this system.

Connect the analogue audio output jacks of your component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing INPUT/TUNER, I/i and ENTER (

AUX Connection

Player

VIDEO

AUX

COMPONENT

INPUT

VIDEO

NOTE

After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.

Red

White

To the audio output jacks

of your component

(TV, VCR, etc.)

PORTABLE IN connection

25Installation

OPTICAL IN 1/2 connection

You can enjoy the sound from your portable audio player through the speakers of this system.

Connect the headphones (or line out ) jack of the portable audio player into the PORTABLE IN socket of this unit. And then select the [PORTABLE] option by pressing INPUT/TUNER, I/i and ENTER (

PORT.IN Connection

You can enjoy the sound from your component with a digital optical connection through the speakers of this system.

Connect the optical output jack of your component into the OPTICAL IN 1/2 jacks on the unit. And then select the [OPTICAL 1/2] option by pressing INPUT/TUNER, I/i and ENTER (

Optical Connection

). Or press OPTICAL to select directly.

To the digital

optical output jack

of your component

Installation

twZGSGUUU

26 Installation

Bluetooth® connection

About Bluetooth

Bluetooth® is wireless communication technology for short range connection.

The available range is within 10 meters. (The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms.) Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via

Installation

the Cascade if the connection was made via Bluetooth wireless technology.

Available Devices : Mobile phone, MP3, Laptop, PDA (This units be supported the Stereo Headset.)

Bluetooth Pro les

In order to use Bluetooth wireless technology, devices must be able to interpret certain pro les. This unit is compatible with following pro le.

A2DP (Advanced Audio Distribution Pro le)

Listening to music of a Bluetooth device

Pairing your unit and Bluetooth device

Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again.

1. Select the Bluetooth function by using the

INPUT/TUNER or BT AUDIO. Appears “BT AUDIO” and then “BT READY” in display window.

2. Operate the Bluetooth device and perform

the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your unit appears as “PIONEER AUDIO”.

3. Enter the PIN code.

PIN cord : 0000

4. When this unit successfully paired with your

Bluetooth device, Bluetooth LED of this unit lights up and appears “BT SINK”.

NOTE

Depending on the Bluetooth device type, some device have a di erent pairing way.

5. Listening to music.

To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide.

NOTE

• If you change the function of the unit, the

Bluetooth function is disconnected, operate pairing again.

• AVRCP cannot be available in this mode.

Checking the information of connected Bluetooth device

This function is operated after pairing. You can check the Bluetooth information.

Press DISPLAY repeatedly.

Bluetooth information is changed as follows. Local Bluetooth Device Address t Device Name t None t ...

NOTE

• This units dose not be supported the Mono Headset Pro le (Hands Free Pro le).

• The sound may be interrupted when the connection interfered by the other electronic wave.

• You cannot control the Bluetooth device with this unit.

• Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported.

• Although the distance between your Bluetooth and the set is less than 10 m, there are obstacles between both, your Bluetooth device cannot be connected.

• Depending on the type of the device, you may not be able to use the Bluetooth function.

• When not connected the Bluetooth, “BT READY” appears on the display window.

• The Electrical malfunction due to devices using same frequency such as Medical equipment, Microwaves or wireless LAN devices, the connection will be disconnected.

• When someone stands and interrupts communication between Bluetooth device and the player, the connection will be disconnected.

• If the gotten away of the distance between Bluetooth and the unit, the sound quality is lower and lower the connection will disconnect when the space between the Bluetooth and the unit gets out of the operating range of Bluetooth.

• The device with Bluetooth wireless technology is disconnected, if you turn o the main unit or put the device away from the main unit more than 10 m.

27Installation

Installation

28 Installation

Connecting to your Home Network

This player can be connected to a local area network (LAN) via the LAN port on the rear panel.

Please refer to the documentation for your network device for further instructions. Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet

Installation

cable (CAT5 or better with RJ45 connector). In the example con guration for wired connection below, this player would be able to access content from either of the PCs.

Network Connection

Router

WAN

LAN 1

LAN 2

LAN 3

Player

Broadband

Service

NOTE

• When plugging or unplugging the LAN cable,

hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.

• Do not connect a modular phone cable to the

LAN port.

• Since there are various connection

con gurations, please follow the speci cations of your telecommunication carrier or internet service provider.

• If you want to access content from PCs or DLNA

servers, this player must be connected to the same local area network with them via a router.

29Installation

Network Setup

Before setting the wired network, you need to connect the broadband internet to your home network.

If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follows.

1. Select [Connection Setting] option in the

[Setup] menu then press ENTER (

2. Use U/u/I/

to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.

NOTE

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set the [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using U/u/I/ buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.

3. Select [OK] and press ENTER ( ) to apply

network settings.

4. The player will ask you to test the network

connection. Select [OK] and press ENTER

) to complete the network connection.

(

5. If you select [Test] and press ENTER ( )

at step 4 above, the network connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu.

and numerical

Installation

30 Installation

Notes on Network Connection:

• Many network connection problems during set up can often be  xed by re-setting the router or modem. After connecting the player to the home network, quickly power o and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

• Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

• Our company is not responsible for

Installation

any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.

• The features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.

• Some internet contents may require a higher bandwidth connection.

• Even if the player is properly connected and con gured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.

• Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection.

• Any fees charged by an ISP including, without limitation, connection charges are your responsibility.

• A 10 Base-T or 100 Base-TX LAN port is required for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.

• You must use a Router to use xDSL service.

• A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.)

• The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

• Turn o all unused network equipment in your local home network. Some devices may generate network tra c.

31Installation

USB device connection

This player can play movie, music and photo  les contained in the USB device.

1. Insert a USB device to the USB port until it

 ts into place.

USB Connection

2. Press HOME MENU.

Select [Movie], [Photo] or [Music] using

U/u/I/i

3. Select a  le using U/u/I/i, and press PLAY

or ENTER ( You can check the space of the USB device on the screen.

4. Select the other mode. And withdraw the

USB device carefully.

, and press ENTER ( ).

) to play the  le.

NOTE

• This player supports USB  ash memory/external HDD formatted in FAT16, FAT32 and NTFS when accessing  les (music, photo, movie). However, for BD-LIVE and Audio CD recording, only FAT16 and FAT32 formats are supported. Use the USB  ash memory/external HDD formatted in either FAT16 or FAT32 when using BD-LIVE and Audio CD recording.

• The USB device can be used for local storage for enjoying BD-Live discs from the Internet.

• This unit can support up to 4 partitions of the USB device.

• Do not extract the USB device during operation (play, etc.).

• An USB device which requires additional programme installation when you have connected it to a computer, is not supported.

• USB device: USB device that support USB 1.1 and USB 2.0.

• Movie, music and photo  les can be played. For details of operations on each  le, refer to relevant pages.

• Regular back up is recommended to prevent data loss.

• If you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognised.

• Some USB device may not work with this unit.

• Digital camera and mobile phone are not supported.

• The USB Port on this unit cannot be connected to a PC.

Installation

32 Installation

Settings

Adjust the Setup Settings

You can change the settings of the player in the [Setup] menu.

1. Press HOME MENU (

Installation

2. Use I/

ENTER ( ). The [Setup] menu appears.

i/U/u

to select [Setup] and press

4. Use U/u to select a second setup option,

and press ENTER ( level.

5. Use U/u to select a desired setting, and

press i or ENTER ( ) to con rm your selection.

) to move to the third

3. Use U/u to select a  rst setup option, and

press i to move to the second level.

33Installation

[DISPLAY] Menu

TV Aspect Ratio

Select a TV aspect ratio option according to your TV type.

[4:3 Letter Box]

Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.

[4:3 Pan Scan]

Select when a standard 4:3 TV is connected. Displays pictures cropped to  ll your TV screen. Both sides of the picture are cut o .

[16:9 Original]

Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides.

[16:9 Full]

Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to  ll the entire screen.

Resolution

Sets the output resolution of the Component and HDMI video signal. Refer to page 23 and 70 or details about the resolution setting.

[Auto]

If the HDMI OUT jack is connect TVs providing display information (EDID), this automatically selects the resolution best suited to the connected TV. If the COMPONENT VIDEO OUT only is connected, this changes the resolution to 1080i as default resolution.

[1080p]

Outputs 1080 lines of progressive video.

[1080i]

Outputs 1080 lines of interlaced video.

[720p]

Outputs 720 lines of progressive video.

[576p (480p)]

Outputs 576 (480) lines of progressive video.

[576i (480i)]

Outputs 576 (480) lines of interlaced video.

ed to

Installation

NOTE

You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p.

34 Installation

1080p Display Mode

When the resolution is set to 1080p, select [24 Hz] for smooth presentation of  lm material (1080p/ 24 Hz) with a HDMI-equipped display compatible with 1080p/ 24 Hz input.

NOTE

• When you select [24 Hz], you may experience some picture disturbance when the video switches video and  lm material. In this case, select [60 Hz].

• Even when [1080p Display Mode] is set to [24 Hz], if your TV is not compatible with

, the actual frame frequency of

Installation

1080p/ 24 Hz

the video output will be 60 Hz to match the video source format.

HDMI Color Setting

Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device.

[YCbCr]

Select when connecting to a HDMI display device.

[LANGUAGE] Menu

Display Menu

Select a language for the [Setup] menu and on-screen display.

Disc Menu/ Disc Audio/ Disc Subtitle

Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.

[Original]

Refers to the original language in which the disc was recorded.

[Other]

Press ENTER ( Use number buttons then ENTER ( ) to enter the corresponding 4-digit number according to the language code list on page 69.

[O ] (for Disc Subtitle only)

Turn o Subtitle.

) to select another language.

[RGB]

Select when connecting to a DVI (RGB) display device.

NOTE

Depending on the disc, your language setting may not work.

35Installation

[AUDIO] Menu

Speaker Setup

To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level.

[Speaker]

Select a speaker that you want to adjust.

[Volume]

Adjust the output level of each speaker.

[Distance]

Adjust the distance between each speaker and the listening position.

[Test/ Stop test tone]

The speakers will emit a test tone.

[OK]

Con rms the setting.

[Cancel]

Cancels the setting.

HD AV Sync

Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it e ectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms.

The delay will vary depending on which digital TV channel you are on. If you change channel you may need to readjust the HD AV Sync.

U u

DRC (Dynamic Range Control)

When a title encoded in Dolby Digital or Dolby Digital Plus is playing back, you may wish to compress the dynamic range of the audio output (the di erence between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set [DRC] to [On] for this e ect.

NOTE

The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode.

Installation

36 Installation

[LOCK] Menu

To access any features in the [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER ( password.

Password

You can create or change the password.

[None]

Enter a 4-digit password twice, and press

Installation

ENTER (

) to create a new password.

[Change]

Enter the current password and press ENTER

). Enter a 4-digit password twice, and

( press ENTER ( ) to create a new password.

NOTE

If you make a mistake before pressing ENTER press CLEAR. Then input the correct password.

If you forget your password,

) to create a new

( )

DVD Rating

Blocks playback of rated DVD based on their content. (Not all discs are rated.)

[Rating 1-8]

Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.

[Unlock]

If you select this, parental control is not active and the disc plays in full.

BD Rating

Sets an age limit for BD-ROM playback. Use number buttons to input an age limit for BD-ROM viewing.

[255]

All BD-ROM can be played.

[0-254]

Prohibits play of BD-ROM with corresponding ratings recorded on them.

NOTE

The [BD Rating] will be applied only for the BD disc that containing the Advanced Rating Control.

If you forget your password, you can clear it using the following steps:

1. Remove any disc that might be in the player.

2. Select [Lock] option in the [Setup] menu.

3. Use number buttons to enter “210499” on the

[Lock] Menu. The password is cleared.

Area Code

Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 68.

37Installation

[NETWORK] Menu

Connection Setting

If your home network environment is ready to connect to the player, the player needs to be set up for network communication. (See “Connecting to your Home Network” on page 28.)

Connection Status

If you want to check the network status on this player, select the [Connection Status] option and press ENTER ( ) to check whether a connection to the network and the internet has been established.

BD-LIVE connection

You can restrict Internet access when BD-LIVE functions are used.

[Permitted]

Internet access is permitted for all BD-LIVE contents.

[Partially permitted]

Internet access is permitted only for BDLIVE contents which have content owner certi cates. Internet access and AACS Online functions are prohibited for all BDLIVE contents without a certi cate.

[OTHERS] Menu

DivX VOD

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an o cial DivX Certi ed device that plays DivX video. Visit www.divx.com for more information and software tools to convert your  les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certi ed® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

[Register]

Displays the registration code of your player.

[Deregister]

Deactivate your player and display the deactivation code.

NOTE

All the downloaded videos from DivX VOD with this player’s registration code can only be played back on this unit.

Installation

[Prohibited]

Internet access is prohibited for all BD-LIVE contents.

38 Installation

Auto Power O

The screen saver appears when you leave the player in Stop mode for about  ve minutes. If you set this option to [On], the unit automatically turns itself o after the Screen Saver is displayed for 25 minutes. Set this option to [O ] to leave the screen saver until the unit is operated by the user.

Initialize

Factory Set

You can reset the player to its original factory settings.

Installation

BD Storage Clear

Removes the BD contents from the connected USB storage.

NOTE

If you reset the player to its original factory settings using [Factory Set] option, you have to set all the activation for the on-line services and network settings again.

Software Information

Displays the current software version.

39Installation

Sound E ect

You can select a suitable sound mode. Press SOUND repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe di erent depending on sound sources and e ects.

[Pioneer 1]: Gives you suitable sound setting with connecting small type of speakers (S-BD30).

[Pioneer 2]: Gives you suitable sound setting with connecting tall type of speakers (S-BD50T).

[Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded.

[Bass Blast]: Reinforce the bass sound e ect from front left and right speaker and subwoofer.

[PL ll Movie]: Performs Pro Logic ll movie mode decoding to the input signal and produces  ve full-bandwidth output channels from 2 channel sources. This setting is ideal for watching videos of overdubbed or old movies. This mode is available only to 2 channel sources.

[PL ll Music]: Performs Pro Logic ll music mode decoding to the input signal and produces  ve full-bandwidth output channels from 2 channel sources. This setting is ideal for normal stereo sources such as CD. This mode is available only to 2 channel sources.

[Clear Voice]: This mode makes voice sound clear, improving the quality of voice sound.

[Game]: You can enjoy more virtual sound while playing video games.

[Night]: This may be useful when you want to watch movies at low volumes late at night.

[Mus. ReTouch]: When listening to MP3  les or other compressed music, you can enhance the sound. This mode is available only to 2 channel sources.

[Loudness]: Improves bass and treble sound.

Installation

40 Operation

4 Operation

General Playback

Playing Discs

1. Press Z OPEN/CLOSE, and place a disc on

the disc tray.

Operation

2. Press Z OPEN/CLOSE to close the disc tray.

For most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically.

3. Press

HOME MENU.

4. Select [Movie], [Photo] or [Music] using

U/u/I/i

5. Select the Disc option using I/i, and press

ENTER (

When you connect up to two devices, it appears as above.

6. Select a  le using U/u/I/i, and press B

PLAY or ENTER (

• Playback functions described in this manual are not always available in every  les and medium. Some functions can be restricted depending on many factors.

• Depending on the BD-ROM titles, a USB device connection may be needed for proper playback.

, and press ENTER ( ).

) to play the  le.

NOTE

41Operation

To stop playback

Press x STOP during playback.

To pause playback

Press X PAUSE/STEP during playback. Press B PLAY to resume playback.

To play frame-by-frame

Press X PAUSE/STEP while movie playback. Press X PAUSE/STEP repeatedly to playback Frame-by-Frame.

To scan forward or backward

Press m or M to play fast forward or fast reverse during playback. You can change the various playback speeds by pressing m or M repeatedly.

To slow down the playing speed

While the playback is paused, press M SCAN repeatedly to play various speeds of slow motion.

To skip to the next/previous chapter/track/ le

During playback, press . or > to go to the next chapter/track/ le or to return to the beginning of the current chapter/track/ le. Press . twice brie y to step back to the previous chapter/track/ le.

Using the disc menu

BD DVD AVCHD

To display the disc menu

The menu screen may be displayed  rst after loading a disc which contains a menu. If you want to display the disc menu during playback, press MENU.

Use U/u/I/i buttons to navigate through menu items.

To display the Pop-up menu

Some BD-ROM discs contain a Pop-up menu that appears during playback.

Press POPUP/ TOP MENU during playback, and use U/u/I/i buttons to navigate through menu items.

Resume playback

BD DVD AVCHD MOVIE ACD

MUSIC

This unit remembers the x STOP depending on the disc. If “

(Resume Stop)” appears on the screen

brie y, press B (PLAY) to resume playback (from the scene point).

If you press x (STOP) twice or unload the disc, “x”(Complete Stop) appears on the screen. The unit will clear the stopped point.

Operation

NOTE

• The resume point may be cleared when a button is pressed (for example; 1 (POWER),

(OPEN/CLOSE), etc).

• On BD-Video discs with BD-J, the resume playback function does not work.

• If you press x (STOP) once during BD-ROM interactive title playback, the unit will be in Complete Stop mode .

42 Operation

Advanced Playback

Repeat Playback

BD DVD AVCHD ACD MUSIC

During playback, press REPEAT ( to select a desired repeat mode.

BDs/DVDs

– Selected portion will be repeated

A-

continually.

Chapter

played back repeatedly.

Title

back repeatedly.

To return to normal playback, press REPEAT (

) repeatedly to select [O ].

Operation

Audio CDs/Music  les

played back repeatedly.

back repeatedly.

– The tracks or  les will be played back

in random order.

played back repeatedly in random order.

continually. (Audio CD only)

To return to normal playback, press CLEAR.

• If you press > once during Repeat Chapter/ Track playback, the repeat playback cancels.

• This function may not work on some disc or title.

– The current chapter will be

– The current title will be played

– The current track or  le will be

– All the tracks or  les will be played

– All the tracks or  les will be

– Selected portion will be repeated

NOTE

) repeatedly

Repeating a speci c portion

BD DVD AVCHD ACD

This player can repeat a portion you have selected.

1. During playback, press REPEAT (

select [A-] at the beginning of the portion you wish to repeat. And then press ENTER ( ).

2. Press ENTER (

Your selected portion will be repeated continually.

3. To return to normal playback, press REPEAT

) repeatedly to select [OFF] or press

( CLEAR.

) at the end of the portion.

) to

NOTE

You cannot select a portion less than 3 seconds.

Marker Search

BD DVD AVCHD MOVIE

You can start playback from up to nine memorized points.

To enter a marker

1. During playback, press MARKER at the

desired point. The Marker icon appears on the TV screen brie y.

2. Repeat step 1 to add up to nine markers.

To recall a marked scene

1. Press SEARCH and the search menu appears

on the screen.

2. Press a number button to select a marker

number that you want to recall. Playback starts from the marked scene.

43Operation

To delete a Marker

1. Press SEARCH and the search menu appears

on the screen.

2. Press u to highlight a marker number. Use

I/i

to select a marked scene that you

want to delete.

3. Press CLEAR and the marked scene is erased

from the search menu.

NOTE

• This function may not work depending on discs, titles, server ability.

• All marked points are cleared if the title is in complete stop (x) mode, the title is changed or if you unload the disc.

• If the total length of the title is less than 10 seconds, this function is not available.

Using the search menu

BD DVD AVCHD MOVIE

Using search menu, you can easy to  nd the point where you want to start playback.

To search a point

1. During playback, press SEARCH to display

the search menu.

2. Press I/i to skip the playback 15 seconds

forward or backward. You can select a point that you want to skip by pressing and holding I/i button.

To start playback from a marked scene

1. Press SEARCH and the search menu appears

on the screen.

2. Press u to highlight a marker number. Use

I/i

to select a marked scene that you

want to playback from.

3. Press ENTER (

marked scene.

) to start playback from the

Operation

NOTE

• This function may not work depending on discs, titles, server ability.

• This function may not work on some [Home Link] contents depending on the  le type and ability of the DLNA server.

Operation

Last Scene Memory

BD DVD

This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch o the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.

NOTE

• Last Scene Memory function for a previous disc is erased once a di erent disc is played.

• This function may not work depending on the disc.

• This unit does not memorize settings of a disc if you switch o the unit before commencing to play it.

Operation

On-Screen display

You can display and adjust various information and settings concerning the content.

Displaying content information on-screen

BD DVD AVCHD MOVIE

1. During playback, press DISPLAY (

various playback information.

Title – Current title number/total number

of titles Chapter – Current chapter number/total

number of chapters Time – Elapsed playing time/Total

playback time Audio – Selected audio language or

channel Subtitle – Selected subtitle

Angle – Selected angle/total number of

angles TV Aspect Ratio – Selected a TV aspect

Ratio Picture Mode – Selected picture mode

) to show

a b c

e f

g h

Operation

2. Select an option using U/u.

3. Use I/i to adjust the selected option

value.

4. Press RETURN (O) to exit the On-Screen

display.

NOTE

• If no button is pressed for a few seconds, the onscreen display disappears.

• A title number cannot be selected on some discs.

• Available items may di er depending on discs or titles.

• If BD interactive title is playing back, some setting information is displayed on the screen but prohibited to be changed.

Playing from selected time

BD DVD AVCHD MOVIE

1. Press DISPLAY (

) during playback. The time search box shows the elapsed playing time.

2. Select the [Time] option and then input

the required start time in hours, minutes, and seconds from left to right.

For example, to  nd a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”.

Press I/i to skip the playback 60 seconds

d or backward.

forwar

3. Press ENTER (

) to start playback from

selected time.

NOTE

• This function may not work on some disc or titles.

• This function may not work on some [Home Link] contents depending on the  le type and ability of the DLNA server.

Operation

Hearing di erent audio

BD DVD AVCHD MOVIE

1. During playback, press DISPLAY (

display the on-screen display.

2. Use U/

3. Use I/

• Some discs allow you to change audio selections

• Immediately after you have switched sound,

Operation

to select the [Audio] option.

to select desired audio language,

audio track or audio channel.

NOTE

only via the disc menu. If this is the case, press POPUP/ TOP MENU or MENU button and choose the appropriate audio from the selections on the disc menu.

there may be a temporary discrepancy between the display and actual sound.

Selecting a subtitle language

) to

BD DVD AVCHD MOVIE

1. During playback, press DISPLAY (

) to

display the on-screen display.

2. Use U/

3. Use I/

to select the [Subtitle] option.

to select the desired subtitle

language.

4. Press RETURN (O) to exit the On-Screen

display.

NOTE

Some discs allow you to change subtitle selections only via the disc menu. If this is the case, press POPUP/ TOP MENU or MENU button and choose the appropriate subtitle from the selections on the disc menu.

Operation

Watching from a di erent angle

BD DVD

If the disc contains scenes recorded at di erent camera angles, you can change to a di erent camera angle during playback.

1. During playback, press DISPLAY (

display the on-screen display.

display.

to select the [Angle] option.

to select desired angle.

2. Use U/

3. Use I/

4. Press RETURN (O) to exit the On-Screen

) to

Changing the TV Aspect Ratio

BD DVD AVCHD MOVIE

You can change the TV aspect ratio setting during playback.

1. During playback, press DISPLAY (

display the on-screen display.

option.

display.

to select the [TV Aspect Ratio]

to select desired option.

2. Use U/

3. Use I/

4. Press RETURN (O) to exit the On-Screen

) to

Changing the Picture Mode

BD DVD AVCHD MOVIE

You can change the [Picture mode] option during playback.

1. During playback, press DISPLAY (

display the on-screen display.

option.

display.

to select the [Picture Mode]

to select desired option.

2. Use U/

3. Use I/

4. Press RETURN (O) to exit the On-Screen

Setting the [User setting] option

1. During playback, press DISPLAY ( ) to

display the on-screen display.

2. Use U/

3. Use I/

to select the [Picture Mode]

option.

to select the [User setting] option,

and press ENTER (

) to

Operation

NOTE

Even if you change the value of the [TV Aspect Ratio] option in On-Screen display, the [TV Aspect Ratio] option in the [Setup] menu is not changed.

4. Use U/u/I/

options. Select [Default] option then press ENTER

( ) to reset the all adjustments.

5. Use U/u/I/

and press ENTER (

to adjust the [Picture Mode]

to select the [Close] options,

) to  nish setting.

Operation

Enjoying BD-LIVE

This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Pro le 1 version 1.1/ Final Standard Pro le).

Secondary video and audio can be played from a disc compatible with the picture-in-picture function. For the playback method, refer to the instructions in the disc.

In addition to the BONUSVIEW function, BDVideo supporting BD-LIVE (BD-ROM version 2 Pro le 2) that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet.

Operation

1. Check the network connection and settings

(pages 28-30).

2. Insert a USB storage device to the USB port

on the front panel. A USB storage device is needed to

download bonus content.

USB Connection

3 . Press HOME MENU, and set the [BD-LIVE

connection] option on the [Setup] menu (page 37).

Depending on the disc, the BD-LIVE function may not operate if [BD-LIVE connection] option is set to [Partially Permitted].

4 . Insert a BD-ROM with BD-LIVE.

The operations may di er depending on the disc. Refer to the manual supplied with the disc.

NOTE

• Do not extract the connected USB device while

content is being downloaded or a Blu-ray disc is still in the disc tray. Doing so may damage the connected USB device and BD-LIVE features may not operate properly with the damaged USB device anymore. If the connected USB device seems damaged from such an action, you can format the connected USB device from the PC and reuse it with this player.

• Some BD-LIVE contents may be restrictively

accessed in some territories by contents provider’s own decision.

• It may take up to several minutes to load and

start enjoying BD-LIVE contents.

Operation

Playing movie  le and VR discs

You can play DVD-RW discs that are recorded in Video Recording (VR) format and movie  les contained in a disc or USB device.

1. Press

2. Select [Movie] using U/u/I/i, and press

3. Select the device using I/i, and press

HOME MENU.

ENTER ( ).

NOTE

• The  le requirements are described on page 11.

• You can use various playback functions. Refer to pages 40-47.

• Un nalized DVD VR format discs may not be played in this player.

• Some DVD-VR disc are made with CPRM data by DVD recorder. This unit cannot support these kinds of discs.

What is CPRM?

CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast programmes. CPRM stands for Content Protection for Recordable Media.

Operation

When you connect up to two devices, it appears as above.

4. Select a  le using U/u/I/i, and press

PLAY or ENTER ( ) to play the  le.

Operation

Selecting a subtitle  le

MOVIE

If a movie  le name and the subtitle  le name are the same, subtitle  le is played automatically when playing the movie  le.

If the subtitle  le name is di erent with the movie  le name, you need to select the subtitle  le on the [Movie] menu before playing the movie.

NOTE

to select the subtitle  le you

1. Use U/u/I/

wish to play in the [Movie] menu.

2. Press ENTER (

Press ENTER ( ) again to deselect the subtitle  le. Selected subtitle  le will be displayed when you play the movie  le.

Operation

• If you press x STOP during playback, the subtitle selection is cancelled.

• This function may not work in the [Home Link] feature.

Changing subtitle code page

MOVIE

If the subtitle is not displayed properly, You can change the subtitle code page to view the subtitle  le properly.

1. During playback, press DISPLAY (

display the on-screen display.

display.

to select the [Code Page] option.

to select desired code option.

2. Use U/

3. Use I/

4. Press RETURN (O) to exit the On-Screen

) to

Operation

Viewing a photo

You can view photo  les using this player.

1. Press

2. Select [Photo] using I/i, and press ENTER

3. Select the device using I/i, and press

HOME MENU

( ).

ENTER ( ).

To play a slide show

Press B PLAY to start slide show.

To stop a slide show

Press x STOP during slide show.

To pause a slide show

Press X PAUSE/STEP during slide show. Press B PLAY to re-start the slide show.

To skip to the next/previous photo

While viewing a photo in full screen, press I or

to go to the previous or next photo.

NOTE

• The  le requirements are described on page 11.

• You can use various playback functions. Refer to pages 40-47.

Operation

When you connect up to two devices, it appears as above.

4. Select a  le using U/u/I/i, and press

ENTER (

) to view the photo.

Operation

Options while viewing a photo

You can use various options while viewing a photo in full screen.

1. While viewing a photo in full screen, press

DISPLAY (

2. Select an option using U/u.

Current photo/Total number of photos

Operation

– Use I/i to view previous/next photo. Slide Show – Press ENTER (

pause slide show. Music Select – Select the background

music for the slide show. Music –Press ENTER (

background music. Rotate – Press ENTER (

photo clockwise. Zoom – Press ENTER (

[Zoom] menu. E ect – Use I/i to select a transition

e ect between photos in a slide show. Speed – Use I/i to select a delaying

speed between photos in a slide show.

) to display the option menu.

) to start or pause

) to rotate the

) to display the

b c d e

f g

) to start or

Listening to music during a slide show

You can display photo  les while listening to music  les.

1. Press

2. Select [Photo] or [Home Link] using

U/u/I/i

3. Select the [Disc] or [USB] option using I/i,

and press ENTER ( ).

Selecting a server or a share folder is needed for [Home Link] menu.

4. Select a  le using U/u/I/i, and press

ENTER (

5. Press DISPLAY (

menu.

6. Use U/u to select [Music Select] option,

and press ENTER ( Select] menu.

HOME MENU

, and press ENTER ( ).

) to view the photo.

) to display the option

) to display the [Music

3. Press RETURN (O) to exit the option menu.

Operation

7. Use U/u to select a device, and press ENTER

( ). Devices that you can select may di er

depending on the location of the photo  le you are displaying in full screen.

Photo location Available Device

Disc Disc, USB USB Disc, USB Share Folder on

your PC (CIFS) DLNA server DLNA server

8. Use U/u to select a 

to play.

Select a folder and press ENTER ( ) to display the lower directory.

Select the upper directory.

and press ENTER ( ) to display

CIFS

le or a folder you wish

Listening to music

The player can play Audio CDs and music  les

1. Press

2. Select [Music] using U/u/I/i, and press

ENTER ( ).

3. Select the device using I/i, and press

ENTER ( ).

HOME MENU

Operation

NOTE

When selecting music from [Home Link], folder selection is not available. Only  le selection is available on the [Home link].

9. Use i to select [OK], and press ENTER ( )

to complete music selection.

When you connect up to two devices, it appears as above.

4. Select a music  le or audio track using

U/u/I/i

music.

, and press ENTER (

) to play the

NOTE

• The  le requirements are described on page 11.

• You can use various playback functions. Refer to pages 40-47.

Operation

Audio CD Recording

You can record one desired track or all of the tracks in Audio CD to a USB storage device.

1. Insert a USB storage device to the USB port

on the front panel.

2. Press Z (OPEN/CLOSE), and place an Audio

CD on the disc tray. Press Z (OPEN/CLOSE) to close the disc

tray. The playback starts automatically.

3. Press DISPLAY (

menu.

Press z USB REC button on the remote

control. You can record all musics in the audio CD.

4. Use U/u to select [CD Recording] option,

Operation

and press ENTER ( Recording] menu.

Repeat this step to select tracks as many as you want.

5. Use U/u to select a track you wish to copy

on the menu, and press ENTER ( Repeat this step to select tracks as many as

you can.

) to display the option

) to display the [CD

6. Use U/u/I/i to select [Start], and press

ENTER (

7. Use U/u/I/i to select the destination

folder to be copied.

If you want to create a new folder, use U/u/

I/i

( ). Enter a folder name using the virtual

keyboard, and press ENTER ( ) while [OK] is selected.

8. Use U/u/I/i to select [OK], and press

ENTER ( If you want to stop the Audio CD recording,

press ENTER ( ) while [Cancel] is highlighted.

9. A message appears when Audio CD

recording is completed. Press ENTER ( to check the music  le created in the destination folder.

to select [New Folder] and press ENTER

) to start Audio CD recording.

)

Select all the tracks on an Audio CD.

Selects an encoding option from the pop-up menu (128 kbps, 192 kbps, 320 kbps or Lossless).

Cancels the recording and returns to the previous screen.

NOTE

• The table below shows the average recording time from an audio track with 4 minutes of playback time to a music  le with 192 kbps as an example.

stop mode during playback

1.4 min. 2 min.

• All times in the above table are approximate.

• Actual recording time for USB storage device varies depending on the USB storage device’s ability.

• Make sure that there is minimum of 50 MB free space when recording into the USB storage device.

• The length of the music should be longer than 20 seconds for the proper recording.

• Do not turn o this player or extract the connected USB storage device during Audio CD recording.

Operation

The making of unauthorized copies of

copy-protected material, including computer

programmes,  les, broadcasts and sound

recordings, may be an infringement of copyrights

and constitute a criminal o ense.

This equipment should not be used

for such purposes.

Be responsible

Respect copyrights

Operation

Playing the iPod

You can enjoy the sound with your iPod. For details about iPod, refer to the iPod’s User Guide.

Preparation

• To view iPod’s Videos and Photos on the TV screen.

- Be sure to use the video connection

through the VIDEO OUT jack on the rear panel of this unit. Select the appropriate video input mode on the TV.

- Depending on the iPod, make sure that

select Videos > Video settings, and then set TV Out to Ask or On from your iPod. For details about Video Settings, refer to

Operation

the iPod User Guide.

- The viewing photos is available only if this

unit is in iPod IN mode and you can view photos only as a slide show. You have to start a slide show on your iPod to view a photo on a TV. For details about a slide show, refer to the iPod User Guide.

• Before connecting the iPod, turn this unit o and reduce the volume of this unit to its minimum.

1. Connect the iPod  rmly.

Connect the iPod

Connect the cradle and put your iPod on it.

2. Select a  le using U/u/I/i, and press

ENTER ( ) to play the  le.

Enjoying iPod on the screen

1. Connect the iPod  rmly.

2. Press HOME MENU (

3. Select [Music] or [Movie] using I/i, and

press ENTER ( ). If you connected the other device (CD or USB), select the iPod on the menu.

4. Select a content using U/u/I/i, and press

ENTER (

) to play.

Operation

Enjoying the iPod IN mode

You can operate your iPod by using the supplied remote control and controls on your iPod.

1. Connect the iPod  rmly.

If you turn this unit on, your iPod is automatically turned on and recharging starts.

2. Press INPUT/TUNER to select iPod IN mode.

U/u/I/i

/ENTER

m/M

./>

REPEAT To select a desired repeat

This system is compatible with the audio and video of the iPod(4th generation), iPod nano, iPod classic, iPod mini, iPod touch and iPhone (iPod shu e is not supported.).

Selects an option in the menu.

Starts playback the music or video.

To pause while it is playing. To resume playing, press again.

Fast-forward or rewind a song or video

Skip the playback forward or backward .

mode: Track

( )

(No display).

NOTE

, All

( )

(PLAY)

, O

NOTE

• An error message “CHECK IPOD” or “Connected iPod model is not supported.” appears when:

- your iPod is not available for the function to be

operated.

• An error message “CHECK IPOD” or “Please update iPod’s software.” appears when:

- your iPod has an old software version.

Update your iPod software to latest version.

• If this unit displays an error message, follow the message. An error message “CHECK IPOD” or “Please check your iPod.” appears when:

- the communication between this unit and

your iPod is failed.

Undock & re-dock your iPod in this unit.

- your iPod is not connected  rmly.

- this unit recognises your iPod as unknown

device.

- your iPod is exceptionally low on power.

The battery needs to be charged.

If you charge the battery while iPod is

extremely low in power, it may take longer to charge.

• You may use the dock adapter which should be supplied with your iPod to the dock for the stable use of the iPod. If you need an adapter, consult your iPod dealer.

• Compatibility with your iPod may vary depending on the type of your iPod.

• iPod touch and iPhone have any di erence in operation other than iPod. You may need any additional control to use them with this unit. (e.g. “slide to unlock”)

• If you use an application, make a call, or send and receive SMS text message, etc. on iPod touch or iPhone, disconnect it from iPod dock of this unit and then use it.

• Depending on your iPod’s software version, it may not be possible to control your iPod from this unit. We recommend installing the latest software version.

• The video quality depends on the video sources on your iPod.

• If you have a problem with your iPod, please visit www.apple.com/support/ipod.

Operation

Radio Operations

Be sure that the antenna is connected. (Refer to the page 24)

Listening to the radio

1. Press INPUT/TUNER until TUNER (FM)

appears in the display window. The last received station is tuned in.

2. Press and hold TUNE (-/+) for about two

seconds until the frequency indication starts to change. Scanning stops when the unit tunes in a station. Or Press TUNE (-/+) repeatedly.

3. Adjust the volume by rotating VOLUME on

Operation

the front panel or by pressing VOL (+/- ) on the remote control.

Presetting the Radio Stations

You can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume.

1. Press INPUT/TUNER until the TUNER (FM)

appears in the display window.

2. Select the desired frequency by using TUNE

(-/+).

3. Press ENTER (

in the display window.

4. Press PRESET to select the preset number

you want.

5. Press ENTER (

6. Repeat the steps 2 to 5 to store other

stations.

) a preset number will  ash

). The station is stored.

Deleting all the saved stations

Press and hold CLEAR for two seconds. “ERASE ALL” will  ash up. Press CLEAR again. Then all the saved stations are deleted.

Improving poor FM reception

Press D (blue) (ST/ MONO) colored button on the remote control. This will change the tuner from stereo to mono and usually improve the reception.

Operation

Playing content via your home network

This player can browse and play content from your PC and DLNA certi ed media servers connected on your home network.

About DLNA

This Player is a DLNA Certi ed digital media player that can display and play movie, photo and music content from your DLNAcompatible digital media server (PC and Consumer Electronics).

The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through a network in the home.

The DLNA certi cation logo makes it easy to  nd products that comply with the DLNA Interoperability Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5.

When a PC running DLNA server software or other DLNA compatible device is connected to this player, some setting changes of software or other devices may be required. Please refer to the operating instructions for the software or device for more information.

Accessing a DLNA media server

1. Check the network connection and settings

(pages 28-30).

2. Press

3. Select [Home Link] using U/u/I/i, and

press ENTER (

4. Select a DLNA media server from the list

using U/u, and press ENTER ( ).

If you want to rescan for available media servers, press the green (B) colored button.

Depending on the media server, this player may need to get permission from the server.

5. Select a  le using U/u/I/i, and press

ENTER (

HOME MENU.

NOTE

) to play the  le.

Operation

NOTE

• The  le requirements are described on page 11.

• You can use various playback functions. Refer to pages 40-47.

• The  le requirements on page 11 are not always compatible to the  le’s features and media server’s ability.

• The thumbnail of the unplayable  les can be displayed in the [Home Link] menu cannot be played on this player.

• If there is an unplayable music  le in the [Home Link] menu, the play the next  le.

• The subtitle  le name and movie  le name have to be the same and located in the same f

• The playback and operating quality of the [Home Link] function may be a ected by your home network condition.

• The  les from removable media such as USB

Operation

drive, DVD-drive etc. on your media server may not be shared properly.

e may be some restrictions due

. Ther

er skips the  le and plays

, but those

older.

Accessing a share folder from your PC

1. Start your PC that is connected on your

local area network.

2. On your PC, share folders which contain

movie, photo or music  les.

3. On the player, check the network

connection and settings (pages 28-30).

4. Press

5. Select [Home Link] using U/u/I/i, and

press ENTER (

6. Select a share folder from the list using U/u,

and press ENTER (

If you want to rescan available media servers, press the green (B) colored button.

HOME MENU.

NOTE

Depending on the share folder, this player may need to input network user ID and password for accessing the folder.

7. Select a  le using U/u/I/i, and press

ENTER ( ) to play the  le.

NOTE

• The  le requirements are described on page 11.

• You can use various playback functions. Refer to pages 40-47.

• The thumbnail of the unplayable  les can be displayed in the [Home Link] menu, but those cannot be played on this player.

• If there is an unplayable music  le in the [Home Link] menu, the player skips the  le and play next  le.

• The subtitle  le name and movie  le name have to be the same and located at the same folder.

• The playback and operating quality of the [Home Link] function may be a ected by your home network condition.

• The  les on a removable media such as USB drive, DVD-drive etc. on your PC may not be shared properly.

• You may experience connection problems depending on your PC’s environment.

Operation

PC requirements

• Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required) Windows 7®

• 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors

• Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11b/g/n)

NOTE

If you use Windows® XP or Windows Vista®, visit link below for more information on  le share settings.

Operation

Entering a network user ID and the password

Depending on your PC’s environment, you may need to enter a network user ID and the password for accessing a shared folder.

1. The keyboard menu appears automatically

if the network user ID and the password are required.

2. Use U/u/I/

press ENTER ( on the keyboard menu.

To enter a letter with an accent mark, select the letter from the extended character set.

Example: Select “D” and then press DISPLAY ( ) to display the extended character set. Use ENTER ( ).

Operation

to select a character then

) to con rm your selection

I/i

to select “D” or “Ď” and then press

3. When you  nish entering the network user

ID and password, select [OK] using U/u/I/

and press ENTER (

The network user ID and password will be remembered after accessing the folder for your convenience. If you do not want the network user ID and password to be remembered, press red (A) colored button to un-tick the [Remember] check box before accessing the folder.

) to access the folder.

[Clear] – Clear all entered characters. [Space] – Inserts a space at the cursor

position. [<–] – Deletes the previous character at the

cursor position. [ABC / abc / #+-=&] – Change the keyboard

menu settings to capital letters, small letters or symbols.

5 Maintenance

Maintenance

Notes on Discs

Handling Discs

Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

Handling the Unit

When shipping the unit

Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.

Keeping the exterior surfaces clean

• Do not use volatile liquids such as insecticide spray near the unit.

• Wiping with strong pressure may damage the surface.

• Do not leave rubber or plastic products in contact with the unit for a long period of time.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

Maintaining the Unit

The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service center.

Maintenance

Troubleshooting

6 Troubleshooting

General

The Power does not turn on.

The unit does not start playback.

The angle cannot be changed.

The subtitle language cannot be changed or turned o .

Cannot play MP3/WMA/ JPEG/DivX  les.

The remote control does

Troubleshooting

not work properly.

• Plug the power cord into the wall outlet securely.

• Insert a playable disc. (Check the disc type, color system, and regional code.)

• Place the disc with the playback side down.

• Place the disc on the disc tray correctly inside the guide.

• Clean the disc.

• Cancel the rating function or change the rating level.

• Multi-angles are not recorded on the DVD Video being played.

• Subtitles are not recorded on the DVD Video being played.

• The  les are not recorded in a format that the unit can play.

• The unit does not support the codec of the movie  le.

• The remote control is not pointed at the remote sensor of the unit.

• The remote control is too far from the unit.

• There is an obstacle in the path between the remote control and the unit.

• The battery in the remote control is exhausted.

Troubleshooting

Picture

There is no picture. • Select the appropriate video input mode on the TV so the

picture from the unit appears on the TV screen.

• Connect the video connection securely.

• Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection.

• Your TV may not support the resolution you have set on the player. Change the resolution to one that your TV accepts.

• The player’s HDMI OUT jack is connected to a DVI device that does not support copyright protection.

Picture noise appears • You are playing a disc recorded in a color system that is

di erent from your TV.

• Set the resolution to one that your TV accepts.

Sound

There is no sound or the sound is distorted.

• The unit is in scan, slow motion, or pause mode.

• The sound volume is low.

• Check the speaker cable connection. (page 16)

Troubleshooting

Network

BD-LIVE feature does not work.

Design and speci cations are subject to change without notice.

• The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space.

• Ensure that the unit is correctly connected to the local area network and can access the internet (see page 28).

• Your broadband speed may not be fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed to suit the unit’s.

• The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. Set the option to [Permitted].

Updates

Note that information on this product is available on the Pioneer website. Please check the website for information on updating or servicing your Blu-ray Disc PLAYER.

Troubleshooting

7 Appendix

Appendix

Controlling a TV with the Supplied Remote Control

You can control your PIONEER TV using the buttons below.

TV Control Buttons

Button Operation

(TV Power)

INPUT Switch the TV’s input source

CH +/- Scan up or down through

VOL +/- Adjust the volume of the

Turn the TV on or o .

between the TV and other input sources.

memorized channels.

TV.

Setting up the remote to control your TV

You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code.

1. While holding down 1 (TV POWER) button,

and press the manufacturer code for your TV with the numerical buttons (see the table below).

Manufacturer Code Number

Pioneer 1(Default)

Sony 2, 3

Panasonic 4, 5

Samsung 6, 7

LG 8, 9

TV PO

2. Release the 1 (

complete setting.

Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

WER) button to

Appendix

NOTE

Depending on the unit being connected, you may not be able to control your TV using some of the buttons.

Appendix

Area Code List

Choose an area code from this list.

Area Code Area Code Area Code Area Code

Afghanistan AF Argentina AR Australia AU Austria AT Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR

Appendix

Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Ethiopia ET

Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR Greenland GL Hong Kong HK Hungary HU India IN Indonesia ID Israel IL Italy IT Jamaica JM Japan JP Kenya KE Kuwait KW Libya LY Luxembourg LU Malaysia MY Maldives MV Mexico MX

Monaco MC Mongolia MN Morocco MA Nepal NP Netherlands NL Netherlands

Antilles AN New Zealand NZ Nigeria NG Norway NO Oman OM Pakistan PK Panama PA Paraguay PY Philippines PH Poland PL Portugal PT Romania RO Russian

Federation RU Saudi Arabia SA Senegal SN

Singapore SG Slovak Republic SK Slovenia SI South Africa ZA South Korea KR Spain ES Sri Lanka LK Sweden SE Switzerland CH Taiwan TW Thailand TH Turkey TR Uganda UG Ukraine UA United States US Uruguay UY Uzbekistan UZ Vietnam VN Zimbabwe ZW

Appendix

Language code List

Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].

Language Code Language Code Language Code Language Code

Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 6669 Chinese 9072 Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 English 6978 Esperanto 6979 Estonian 6984 Faroese 7079 Fiji 7074 Finnish 7073

French 7082 Frisian 7089 Galician 7176 Georgian 7565 German 6869 Greek 6976 Greenlandic 7576 Guarani 7178 Gujarati 7185 Hausa 7265 Hebrew 7387 Hindi 7273 Hungarian 7285 Icelandic 7383 Indonesian 7378 Interlingua 7365 Irish 7165 Italian 7384 Japanese 7465 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kirghiz 7589 Korean 7579 Kurdish 7585 Laothian 7679 Latin 7665 Latvian, Lettish 7686 Lingala 7678

Lithuanian 7684 Macedonian 7775 Malagasy 7771 Malay 7783 Malayalam 7776 Maori 7773 Marathi 7782 Moldavian 7779 Mongolian 7778 Nauru 7865 Nepali 7869 Norwegian 7879 Oriya 7982 Panjabi 8065 Pashto, Pushto 8083 Persian 7065 Polish 8076 Portuguese 8084 Quechua 8185 Rhaeto-Romance

8277

Rumanian 8279 Russian 8285 Samoan 8377 Sanskrit 8365 Scots Gaelic 7168 Serbian 8382 Serbo-Croatian 8372 Shona 8378

Sindhi 8368 Singhalese 8373 Slovak 8375 Slovenian 8376 Spanish 6983 Sudanese 8385 Swahili 8387 Swedish 8386 Tagalog 8476 Tajik 8471 Tamil 8465 Telugu 8469 Thai 8472 Tonga 8479 Turkish 8482 Turkmen 8475 Twi 8487 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapük 8679 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 7473 Yoruba 8979 Zulu 9085

Appendix

Video output resolution

When the non-copy protected media is playing back

Video Out

Resolution

576i (480i) 576p (480i) 576i (480i)

576p (480p) 576p (480p) 576p (480p)

720p 720p 720p 1080i 1080i 1080i

1080p / 24 Hz 1080p / 24 Hz 576i (480i) 1080i

1080p / 50 (60) Hz 1080p / 50 (60) Hz 576i (480i) 1080i

When the copy protected media is playing back

Video Out

Resolution

576i (480i) 576p (480p) 576i (480i)

576p (480p) 576p (480p) 576p (480p)

720p 720p 576i (480i) 576p (480p) 1080i 1080i 576i (480i) 576p (480p)

1080p / 24 Hz 1080p / 24 Hz 576i (480i) 576p (480p)

1080p / 50 (60) Hz 1080p / 50 (60) Hz 576i (480i) 576p (480p)

HDMI OUT

COMPONENT VIDEO OUT

HDMI connected HDMI disconnected

COMPONENT VIDEO OUT

HDMI connected HDMI disconnected

HDMI OUT connection

Appendix

• For the 576i (480i) resolution setting, real output resolution of HDMI OUT will change to 576p (480p).

• If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

• If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.

• The 1080p video output frame rate may be automatically set to either 24 Hz or 60 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc.

COMPONENT VIDEO OUT connection

BD or DVD could prevent up-scaling on analogue output.

VIDEO OUT connection

The resolution of the VIDEO OUT jack is always outputted at 576i (480i) resolution.

Trademarks and Licences

“Blu-ray Disc” and are trademarks.

“BD-LIVE” logo is a trademark of Blu-ray Disc Association.

“BONUSVIEW” is trademark of Blu-ray Disc Association.

Appendix

HDMI, the HDMI Logo and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.

is a trademark of DVD Format/Logo Licensing

Corporation.

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.

Manufactured under licence from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio l Essential and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

DLNA and DLNA CERTIFIED are trademarks and / or service marks of Digital Living Network Alliance.

DivX is a registered trademark of DivX, Inc., and is used under licence.

“x.v.Color” or “x.v.Color” is a trademark of Sony Corporation.

Appendix

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and / or other countries.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.

This product is licenced under the AVC patent portfolio licence and VC-1 patent portfolio licence for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/ VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licenced to provide AVC/VC-1 Video. No licence is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

iPhone is a trademark of Apple Inc. “Made for iPod” means that an electronic accessory

has been designed to connect speci cally to iPod and has been certi ed by the developer to meet

Appendix

Apple performance standards. “Works with iPhone” means that an electronic

accessory has been designed to connect speci cally to iPhone and has been certi ed by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.

Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. range of 10 meters. Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other trademarks and trade names are those of their respective owners.

Appendix

Speci cations

General

• Power requirements: AC 120 V, 60 Hz

• Power consumption: 150 W In Standby mode: Less than 0.5 W

• Dimensions (W x H x D): Approx. 430 × 64 × 304 mm

• Net Weight (Approx.):

3.6 kg

• Operating temperature: 41 °F to 95 °F (5 °C to 35 °C)

• Operating humidity: 5 % to 90 %

• Bus Power supply (USB): DC 5V

Inputs/ Outputs

• VIDEO OUT:

1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1

• COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

• HDMI OUT (video/audio): 19 pin (HDMI standard, Type A, Version 1.3)

• Analogue AUDIO IN:

2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1

• DIGITAL IN (OPTICAL 1/2): 3 V (p-p), Optical jack x 2

• PORTABLE IN:

0.5 Vrms (3.5 mm stereo jack)

500 mA

Tuner

• FM Tuning Range:

87.5 to 108.0 MHz or 87.50 to 108.00 MHz

Ampli er

• Power output, (PEAK), (4Ω/3Ω) Total 1100 W Front 180 W x 2 Center 180 W Rear 180 W x 2 Sub-Woofer 200 W (Passive)

• Power output, (RMS), THD 10% (4Ω/3Ω) Total 930 W Front 150 W x 2 Center 150 W Rear 150 W x 2 Sub-Woofer 180 W (Passive)

System

• Laser: Semiconductor laser Wavelength: 405 nm / 650 nm

• Signal system: Standard NTSC color TV system

• Frequency response: 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)

• LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX

Appendix

Speakers for HTZ-BD50

S-BD50T

• Front/Surround speaker (Left/ Right) Type: 2 Way Impedance Rated: 4 Ω Net Dimensions 260 x 1097 x 260 mm (W x H x D): Net Weight: 3.8 kg

• Center speaker Type: 1 Way Impedance Rated: 4 Ω Net Dimensions 300 x 87x 65 mm (W x H x D): Net Weight: 0.6 kg

S-BD50SW

• Subwoofer Type: 1 Way 1 speaker Impedance Rated: 3 Ω Net Dimensions 130.5 x 420 x 375 mm (W x H x D): Net Weight: 4.4 kg

Appendix

Speakers for HTZ-BD30

S-BD30

• Front/Surround speaker (Left/ Right) Type: 1 Way Impedance Rated: 4 Ω Net Dimensions 96 x 96 x 85 mm (W x H x D): Net Weight: 0.4 kg

• Center speaker Type: 1 Way Impedance Rated: 4 Ω Net Dimensions 300 x 87x 65 mm (W x H x D): Net Weight: 0.6 kg

• Subwoofer Type: 1 Way 1 speaker Impedance Rated: 3 Ω Net Dimensions 130.5 x 420 x 375 mm (W x H x D): Net Weight: 4.4 kg

Appendix

Open source software notice

The following GPL executables and LGPL libraries used in this product are subject to the GPL2.0/ LGPL2.1 License Agreements:

GPL EXECUTABLES: Linux kernel 2.6, bash, busybox, cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils, net-tools, procps, samba-3.0.25b, sysutils, tcpdump, tftpd, tinylogin, unzip, utelnetd

LGPL LIBRARIES: uClibc, DirectFB, blow sh, cairo,  mpeg, iconv, libusb, mpg123

gSOAP Public License 1.3 LIBRARY: gsoap A copy of the corresponding source code can be

obtained by being charged the fee for distribution. To obtain a copy, contact your local Pioneer Customer Support .

You can obtain a copy of the GPL, LGPL licenses from http://www.gnu.org/licenses/old-licenses/ gpl-2.0.html and http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html .

Also you can obtain a copy of gSOAP public license from http://www.cs.fsu.edu/~engelen/license.html.

This product includes

• OpenSSL: – cryptographic software written by Eric Young

(eay@cryptsoft.com).

– software written by Tim Hudson

(tjh@cryptsoft.com).

– software developed by the OpenSSL Project

for use in the OpenSSL Toolkit. (http://www.openssl.org)

• strace : copyright © 1991, 1992 Paul Kranenburg copyright © 1993 Branko Lankester copyright © 1993 Ulrich Pegelow copyright © 1995, 1996 Michael Elizabeth Chastain copyright © 1993, 1994, 1995, 1996 Rick Sladkey copyright © 1999,2000 Wichert Akkerman

any person obtaining a copy of this software and associated documentation  les (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT W

ARRANTY OF ANY KIND INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

, EXPRESS OR IMPLIED,

Appendix

2 Informations de sécurité

Informations de sécurité

AVIS

RISQUE DE CHOC

ELECTRIQUE NE PAS OUVRIR

ATTENTION: POUR REDUIRE LE RISQUE DE CHOC

ELECTRIQUE, N’ENLEVEZ PAS LE COUVERCLE (OU

LA PARTIE ARRIERE). IL N’Y A PAS DE COMPOSANTS

SUSCEPTIBLES D’ETRE REPARES PAR L’UTILISATEUR

A L’INTERIEUR DE CETTE UNITE. CONFIEZ LE

SERVICE TECHNIQUE A DU PERSONNEL QUALIFIE.

Ce message lumineux ayant un symbole avec une pointe de  èche à l’intérieur d’un triangle équilatéral est destiné à avertir l’utilisateur sur la présence d’une tension dangereuse non isolée à l’intérieur du boîtier du produit pouvant être su samment importante pour constituer un danger de choc électrique pour les personnes.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à avertir l’utilisateur sur la présence d’importantes instructions concernant le fonctionnement ou la maintenance (service technique) dans la littérature accompagnant ce produit.

Avertissements et précautions

AVERTISSEMENT: AFIN D’ÉVITER DES RISQUES D’INCENDIE OU DE CHOC ÉLECTRIQUE, MAINTENEZ CE PRODUIT À L’ABRI DE LA PLUIE ET DE L’HUMIDITÉ.

ATTENTION: Ne pas installer cet équipement à un endroit con né tel qu’une bibliothèque ou similaire.

ATTENTION: Ne pas bloquer les ouvertures d’aération. Installez l’unité en respectant les instructions du constructeur.

Les fentes et les ouvertures de l’unité ont été conçues pour assurer une bonne ventilation et un bon fonctionnement du produit en le protégeant de toute surchau e. Les ouvertures ne doivent jamais être bloquées en installant le produit sur un lit, un canapé, un tapis ou sur toute autre surface similaire. Cette unité ne doit pas être installée dans un emplacement fermé comme une bibliothèque ou une étagère à moins que vous assuriez une ventilation particulière ou que les instructions de constructeur l’autorisent.

ATTENTION: Ce produit est catégorisé comme un produit laser de classe 1 selon le règlement IEC 60825-1:2007 sur la sécurité des produits laser. Pour garantir une utilisation correcte de ce produit, veuillez lire attentivement ce manuel de l’utilisateur et le conserver pour une future consultation. Si cette unité requiert du service technique, contactez un point de service après-vente agréé.

L’utilisation de commandes, de con gurations ou de procédures autres que celles ici décrites peut aboutir à une exposition à de la radiation dangereuse.

Pour éviter l’exposition directe au faisceau laser, n’essayez pas d’ouvrir le boîtier. Il y a de la radiation laser visible lorsqu’il est ouvert. NE FIXEZ PAS LE REGARD SUR LE FAISCEAU.

3Informations de sécurité

AVERTISSEMENT concernant le câble d’alimentation.

Il est conseillé de brancher la plupart des appareils électroménagers sur un circuit dédié;

C’est-à-dire, un circuit qui est relié uniquement à cet appareil et qui n’a pas d’autres prises ni d’autres circuits de dérivation. Véri ez la page concernant ce sujet dans le présent manuel. Ne pas surcharger les prises murales. Des prises murales surchargées, mal  xées ou endommagées, les rallonges électriques, les câbles d’alimentation élimés, le revêtement abîmé ou déchiré des  ls électriques, constituent un danger. Chacun de ces facteurs peut provoquer un choc électrique ou un incendie. Examinez périodiquement le câble d’alimentation de votre appareil, et s’il présente des signes de détérioration, débranchez-le et cessez d’utiliser l’appareil. Faites remplacer le câble d’alimentation par un réparateur agréé. Protégez le câble d’alimentation de mauvais traitements physiques ou mécaniques. Evitez qu’il ne soit tordu, vrillé, pincé, coincé dans une porte ou que l’on marche dessus. Faites particulièrement attention aux prises, et à l’endroit où le câble sort de l’appareil. Pour déconnecter l’appareil du réseau électrique, retirez la prise du câble d’alimentation. Lors de l’installation de l’appareil, assurez-vous que la prise soit facilement accessible.

AVERTISSEMENT : pour éviter tout risque d’incendie, ne posez pas sur l’appareil des sources de  amme nue (telle qu’une bougie allumée).

Cet appareil est équipé d’une batterie transportable ou de piles rechargeables.

Retrait sans danger de la batterie ou des piles de l’appareil: Pour retirer la batterie ou les piles usagées,

procédez dans l’ordre inverse de leur insertion. Pour empêcher toute contamination de l’environnement et tout danger pour la santé des êtres humains et des animaux, la batterie ou les piles usagées doivent être mises au rebut dans le conteneur approprié à un point de collecte prévu pour leur recyclage. Ne jetez pas la batterie ou les piles usagées avec les autres déchets. Recyclez toujours les batteries et piles rechargeables usagées. On n’exposera pas la pile à une chaleur excessive telle que la lumière du soleil, un feu ou autre chose du même genre.

ATTENTION: L’appareil ne doit pas être exposé à l’eau (par mouillure ou éclaboussure) et aucun objet rempli de liquides, comme une vase, ne devrait être placé sur l’appareil.

Notes à propos les droits d’auteur

• La technologie AACS (Advanced Access Content

System) étant le système de protection de contenu approuvé pour le format Blu-Ray, comparable à la technologie CSS (Content Scramble System) pour le format DVD, certaines restrictions sont imposées pour la lecture, la sortie du signal analogique, etc. des contenus protégés par AACS. Le fonctionnement et les restrictions de ce produit peuvent varier selon le moment de votre achat, et ces restrictions peuvent être adoptées et/ou changées par AACS après la fabrication de ce produit.

• Par ailleurs, des empreintes BD-ROM et BD+ sont

aussi utilisées comme système de protection des contenus pour le format BD, lesquelles imposent certaines restrictions comprenant certaines restrictions de reproduction pour les formats protégés BD-ROM et/ou BD+. Pour plus d’informations sur les technologies AACS, BDROM, BD+ ainsi que sur ce produit, veuillez contacter un centre d’assistance clientèle agréé.

• De nombreux disques au format BD-ROM/DVD

sont encodés avec une protection contre la copie. A cause de cela vous devez connecter votre reproducteur directement à votre poste TV, et pas à votre platine Vidéo. Le branchement à la platine Vidéo rend une image déformée en provenance des disques protégés.

• Ce produit intègre une technologie de protection

de droits réservés protégée par des clauses de certains brevets aux Etats-Unis et d’autres droits à la propriété intellectuelle. L’utilisation de cette technologie de protection de droits réservés doit être autorisée par Rovi, et est destinée une utilisation au domicile ou à d’autres usages restreints uniquement sauf autorisation de Rovi. L’ingénierie inverse ou le désassemblage sont interdits.

• Dans le cadre des lois sur les droits d’auteur aux

États-Unis et dans d’autres pays, l’enregistrement, l’utilisation, la lecture, la distribution ou l’édition d’émissions de télévisions, de bandes vidéo, de disques BD-ROM, DVD, CD et autres matériaux peut mettre en jeu votre responsabilité civile et/ ou pénale.

Informations de sécurité

4 Informations de sécurité

Lors de la mise au rebut des piles (batteries) usagées, respectez les réglementations administratives en vigueur ou les directives environnementales qui s’appliquent dans votre pays ou province.

Informations de sécurité

AVERTISSEMENT: La manipulation du cordon de ce produit ou des cordons associés aux accessoires vendus avec le produit peut vous exposer à des éléments chimiques répertoriés dans la proposition 65 réputée dans l’État de Californie ou d’autres entités gouvernementales comme étant cancérigènes ou pour être à l’origine de malformations à la naissance ou de toxicité vis-à-vis de la fertilité. Bien se laver les mains après utilisation !

Cet appareil numérique de Classe B est conforme à la norme Canada ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 « Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit être utilisé à l’intérieur et devrait être placé loin des fenêtres a n de fournir un écran de blindage maximal. Si le matériel (ou son antenne d’émission) est installé à l’extérieur, il doit faire l’objet d’une licence. »

Opération assujettie aux deux conditions suivante: (1) Ce dispositif ne peut causer de l’interférence et; (2) Ce dispositif doit accepter toutes interférences, incluant celles risquant causer l’opération indésirable dudit dispositif.

5Informations de sécurité

Consignes de sécurité importantes

1. Lire les instructions.

2. Conserver ces instructions.

3. Observer tous les avertissements.

4. Suivre toutes les instructions.

5. Ne pas utiliser ce produit près de l’eau.

6. Nettoyer seulement avec un chi on propre.

7. Ne pas obstruer les ouvertures d’aération. Installer conformément aux instructions du fabricant.

8. Ne pas l’installer près de sources de chaleur comme un radiateur, une cuisinière ou d’autres appareils semblables (y compris des ampli cateurs) qui produi-sent de la chaleur.

9. Ne pas neutraliser le but sécuritaire de la prise polarisée ou de mise à la terre. Une prise polarisée est dotée de deux  ches dont l’une  che est plus large que l’autre. Une prise de mise à la terre est dotée de deux  ches et d’une  che de mise à la terre. La  che la plus large ou la  che de mise à la terre est là pour votre sécurité. Si la prise n’entre pas dans la prise murale, consulter un électricien pour la remplacer.

10. Protéger le cordon d’alimentation contre le piétinement ou le pincement, particulièrement près de la  che, des prises et des points de sortie du produit.

11. Utiliser seulement les accessoires spéci és par le fabricant.

12. Utiliser seulement des chariots, des supports, des trépieds, des  xations ou tables spéci és par le fabri-cant ou vendus avec l’appareil. Si un chariot est utilisé, faire attention au moment de déplacer l’appareil pour que celui-ci ne bascule pas.

13. Débrancher cet appareil pendant les orages ou lorsqu’il n’est pas utilisé pendant de longues pério-des.

14. Consulter du personnel quali é pour la réparation. Une intervention est requise lorsque le produit a été endommagé de quelque façon que ce soit, comme le cordon d’alimentation ou la  che, que du liquide y a été renversé ou que des objets ont été insérés à l’intérieur, que le produit a été exposé à la pluie ou à l’humidité, qu’il ne marche pas normalement ou qu’il est tombé par terre.

La protection de votre ouïe est entre vos mains



Pour assurer le rendement optimal de votre matériel et – plus important encore – la protection de votre ouïe, réglez le volume à un niveau raisonnable. Pour ne pas altérer votre sens de la perception, le son doit être clair mais ne produire aucun vacarme et être exempt de toute distorsion. Votre ouïe peut vous jouer des tours. Avec le temps, votre système auditif peut en e et s’adapter à des volumes supérieurs, et ce qui vous semble un « niveau de confort normal » pourrait au contraire être excessif et contribuer à endommager votre ouïe de façon permanente. Le réglage de votre matériel à un volume sécuritaire AVANT que votre ouïe s’adapte vous permettra de mieux vous protéger.



CHOISISSEZ UN VOLUME SÉCURITAIRE

• Réglez d’abord le volume à un niveau inférieur.

• Montez progressivement le volume jusqu’à un

niveau d’écoute confortable; le son doit être clair et exempt de distorsions.

• Une fois que le son est à un niveau confortable, ne

touchez plus au bouton du volume.



N’OUBLIEZ PAS DE RESPECTER LES DIRECTIVES SUIVANTES

• Lorsque vous montez le volume, assurez-vous de

pouvoir quand même entendre ce qui se passe autour de vous.

• Faites très attention ou cessez temporairement

l’utilisation dans les situations pouvant s’avérer dangereuses.

• N’utilisez pas des écouteurs ou un casque d’écoute

lorsque vous opérez un véhicule motorisé; une telle utilisation peut créer des dangers sur la route et est illégale à de nombreux endroits.

Informations de sécurité

Table des matières

Installation

16 Assemblez les enceintes 16 Connexion au haut-parleur

18 Connexion au haut-parleur

Informations de sécurité

2 Avertissements et

précautions

5 Consignes de sécurité

importantes

Préparation

8 Introduction 8 À propos de l’a chage du

symbole “

8 Symboles utilisés dans ce

manuel 9 Accessoires fournis 10 Disques utilisables 11 Compatibilité des  chiers 12 Code Région 12 AVCHD (Advanced Video

Codec High De nition) 12 Besoins du système 12 Notes sur compatibilité 13 Télécommande 14 Panneau avant 15 Panneau arrière

”

19 Montage mural du haut-parleur

19 Remarque supplémentaire à propos

20 Positionnement du système 21 Raccordements à votre téléviseur 21 Connexion HDMI 22 Branchement Composant

23 Connexion vidéo 23 Réglage de la résolution 24 Connexion des antennes 24 Connexions avec un équipement

24 Connexion AUX 25 Connexion PORT. IN 25 Connexion OPTICAL IN 1/2 26 Connexion Bluetooth® 28 Connexion à votre réseau

29 Paramétrage réseau 31 Connexion d’un périphérique USB 32 Réglages des paramètres 32 Réglage des paramètres de

33 Menu [AFFICHAGE] 34 Menu [LANGUE] 35 Menu [AUDIO] 36 Menu [VERROU] 37 Menu [RÉSEAU] 37 Menu [AUTRES]

HTZ-BD50

HTZ-BD30

central

du placement des haut-parleurs

Vidéo

externe

domestique

con guration

39 E ets sonores

Utilisation

40 Lecture normale 42 Lecture avancée 44 A chage à l’écran (OSD) 48 Utilisation de BD-LIVE 49 Lecture d’un  chier vidéo et d’un

disque au format VR 51 A chage d’une photo 53 Écoute de musique 56 Lecture à partir d’un iPod 58 Utilisation de la fonction Radio 59 Lecture de contenu partagé sur votre

réseau domestique

Entretien

63 Remarques au sujet des disques 63 Entretien de l’appareil

Annexe

67 Contrôle d’un téléviseur avec la

télécommande fournie 68 Liste des codes de pays 69 Liste des codes de langue 70 Résolution des sorties vidéo 71 Marques commerciales et licences 73 Spéci cations 75 Avis au sujet des logiciels libres

Dépannage

64 Problèmes de type général 65 Image 65 Son 66 Réseau

8 Préparation

2 Préparation

Introduction

Préparation

À propos de l’a chage du symbole “ ”

Il se peut que “ ” apparaisse sur l’a chage de votre téléviseur pendant son fonctionnement. Cela indique que la fonction spéci ée dans le manuel de l’utilisateur n’est pas disponible sur cet appareil.

Symboles utilisés dans ce manuel

REMARQUE

Souligne la présence de notes particulières ou de caractéristiques de fonctionnement spéciales.

ATTENTION

Ce symbole est utilisé dans ce guide pour indiquer les risques de dommages et la manière de les éviter.

Une section dont le titre comporte un des symboles suivants ne s’applique qu’au disque que représente ce symbole.

DVD

AVCHD

ACD

MOVIE

MUSIC

PHOTO

disques BD-ROM

DVD-Video, DVD±R/RW en mode Video ou VR et  nalisé

DVD±R/RW au format AVCHD

CD Audio

Fichiers vidéo/ lm

Fichier audio/musique

Fichiers image/photo

9Préparation

Accessoires fournis

Câble vidéo (1) Télécommande (1)

Piles (1) Antenne FM (1)

Sabot iPod (1)

Accessoires du boîtier du hautparleur (S-BD50T)

Câble de hautparleur (5)

Vis (12)

Accessoires du boîtier du hautparleur (S-BD50SW)

Câble de hautparleur (1)

Tampons antidérapant - grands (1)

Accessoires du boîtier du hautparleur (S-BD30)

Câble de hautparleur (6)

Tampons antidérapant - grands (1)

Tampons antidérapant – petits (1)

Préparation

bases du socle d’enceinte (4)

Tampons antidérapant - moyens (1)

Tampons antidérapant – petits (1)

10 Préparation

Disques utilisables

Disque Blu-ray

DVD-VIDEO

Préparation

disque de 8 /12 cm Disques que vous pouvez acheter ou louer, comme des  lms.

DVD±R disque de 8 /12 cm

DVD-RW disque de 8 /12 cm

DVD+RW disque de 8 /12 cm

Audio CD disque de 8 /12 cm

CD-R/RW disque de 8 /12 cm

- Disques que vous pouvez acheter

ou louer, comme des  lms.

- Disques BD-R/RE contenant

des  chiers de vidéo, de musique ou de photo.

- Mode vidéo et  nalisés

seulement

- Compatible aussi avec disque

à double couche

- Format AVCHD  nalisé

- Disques DVD±R contenant des

 chiers de vidéo, de musique ou de photo.

- Mode VR, mode vidéo et

disques 

nalisés uniquement

- Format AVCHD  nalisé

- Disques DVD-RW contenant

des  chiers de vidéo, de musique ou de photo.

- Mode vidéo et  nalisés

seulement

mat AVCHD

- For

- Format AVCHD  nalisé

- Disques DVD+RW contenant

des  chiers de vidéo, de musique ou de photo.

- Disques CD-R/RW contenant

des titres audio, des titres vidéo, des  chiers de musique, des images/photos.

REMARQUE

• Selon les conditions de l’équipement de gravure ou du disque CD-R/RW (ou DVD±R/RW ) luimême, certains disques CD-R/RW (ou DVD±R/ RW) ne seront pas lus par cette unité.

• Selon le logiciel d’enregistrement et de  nalisation, certains disques gravés (CD-R/RW, DVD±R/RW, BD-R/RE) ne seront pas lus.

• Les disques BD-R/RE, DVD±R/RW et CD-R/ RW gravés dans un ordinateur personnel ou un graveur DVD ou CD ne seront pas lus si le disque est endommagé ou sale, ou s’il y a de la poussière ou de la condensation sur la lentille du lecteur.

• Si vous enregistrez un disque à l’aide d’un ordinateur personnel, même si vous le faites sur un format compatible, il se peut qu’il ne puisse pas être lu en raison des réglages du logiciel d’application utilisé pour créer le disque. (Contactez l’éditeur du logiciel pour des informations plus détaillées.)

• Ce graveur requiert que les disques et les gravures obéissent à certains standards techniques pour atteindre une qualité de lecture optimale.

• Les DVD préenregistrés sont réglés automatiquement sous ces standards. Il y a beaucoup de formats de disques inscriptibles (y compris les CD-R contenant des  chiers MP3 ou WMA), et il y a certaines conditions préexistantes (vois ci-dessus) pour assurer la compatibilité de lecture.

• Les usagers doivent remarquer qu’il faut obtenir une permission pour télécharger des  chiers MP3/WMA et de la musique depuis Internet. Notre compagnie n’a pas le droit d’octroyer cette permission, droit qui revient toujours aux propriétaires des droits d’auteur.

11Préparation

Compatibilité des  chiers

Général

Extensions de  chier disponibles:

“.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, “.wma”, “.wav”

• Les extensions de  chier varient selon les serveurs DLNA.

• Certains  chiers “.wav” ne sont pas pris en charge par cet appareil.

• Le nom de  chier est limité à 180 caractères.

• Selon la taille et le nombre de  chiers, l’analyse du cont support peut nécessiter quelques minutes.

Nombre maximum de  chiers/dossiers:

2 000 (nombre total de  chiers et de dossiers)

Formats CD-R/RW, DVD±R/RW, BD-R/RE:

Formats ISO 9 660+JOLIET, UDF et UDF Bridge

VIDÉO

Résolution disponible:

1 920 x 1 080 (L x H) pixels Sous-titrage: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/. txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)

• Le  ltre VobSub (.sub) n’est pas disponible avec la fonction [Home Link].

Format de Codec: “DIVX3.xx”, “DIVX4.xx ”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (lecture standard uniquement), H.264/MPEG-4 AVC, MPEG1 SS, MPEG2 PS, MPEG2 TS Format Audio: “Dolby Digital”, “DTS”, “MP3”, “ W M A ”, “A A C ”, “ AC 3 ”

• Les  chiers au format WMA ou AAC ne sont pas tous compatibles avec cet appareil.

Fréquence d’échantillonnage:

dans la plage 32 kHz à 48 kHz (WMA), dans la plage 16 kHz à 48 kHz (MP3) Débit binaire: dans la plage 20 kbps à 320 kbps (WMA), dans la plage 32 kbps à 320 kbps (MP3)

enu enregistré sur le

REMARQUE

• Les  chiers de  lm HD enregistrés sur un CD ou sur une clé mémoire  ash USB 1.0/1.1 peuvent ne pas être lus correctement. Pour lire des  chiers de  lms HD, il est conseillé de les enregistrer sur un disque BD, DVD ou sur une clé mémoire  ash USB 2.0.

• Cet appareil prend en charge le pro l de commande automatique de volume H.264/ MPEG-4 AVC, Main, High au niveau 4.1. Lorsqu’un  chier de niveau supérieur est lu, un message d’avertissement apparaît à l’écran.

• Cet appareil ne prend pas en charge les  chiers enregistrés avec GMC techniques d’encodage vidéo utilisées pour la norme MPEG4, comme pour les formats DivX et XVID.

*1 GMC – Global Motion Compensation

(compensation de mouvement général)

*2 Qpel – Quarter pixel (quart de pixel)

ou Qpel

. Il s’agit de

AUDIO

Fréquence d’échantillonnage: dans la plage 8 kHz à 48 KHz (WMA), dans la plage 11 kHz à 48 kHz (MP3) Débit binaire: dans la plage 8 kbps to 320 kbps (WMA, MP3)

REMARQUE

• Cet appareil ne prend pas en charge les marqueurs ID3 contenus dans les  chiers MP3.

• La durée de lecture totale indiquée à l’a chage peut ne pas être correcte pour les  chiers à débit binaire variable (VBR).

IMAGE

Taille conseillée:

Moins de 4 000 x 3 000 x 24 bits/pixels Moins de 3 000 x 3 000 x 32 bits/pixels Moins de 4 MByte/ le

• Les  chiers d’images/photos enregistrés en compression progressive ou sans perte ne sont pas pris en charge.

Préparation

12 Préparation

Code Région

Sur l’arrière de l’unité est imprimé un code de région. Elle ne peut lire que des disques BD-ROM ou DVD marqués de la même façon ou « ALL ».

AVCHD (Advanced Video Codec High De nition)

Préparation

• Ce lecteur peut lire des disques au format AVCHD. Ces disques sont habituellement enregistrés et utilisés dans les caméscopes.

• Le format AVCHD est un format vidéo numérique haute dé nition utilisé par les caméras vidéo.

• Le format MPEG-4 AVC/H.264 permet de compresser des images avec une e cacité supérieure à celle du format de compression d’images classique.

• Certains disques AVCHD utilisent le format “x.v.Color”.

• Ce lecteur peut lire des disques AVCHD au format “x.v.Color”.

• Certains disques au format AVCHD peuvent ne pas être lus, selon les conditions d’enregistrement.

• Les disques au format AVCHD doivent être  nalisés.

• Le format “x.v.Color” o re une palette de couleurs plus étendue que les disques DVD classiques de caméscope.

Besoins du système

Pour reproduction en haute dé nition:

• Ecran haute dé nition avec prise COMPONENT ou HDMI.

• Disque BD-ROM avec contenu haute dé nition.

• Prises HDMI ou HDCP DVI sur votre écran pour certains contenus (spéci é par les fabricants du disque).

• Pour conversion des DVD standard, une prise HDMI ou HDCP DVI sur votre écran (pour le contenu protégé).

Notes sur compatibilité

• Étant donné que le format BD-ROM est un nouveau format, certains disques, connexions numériques et autres problèmes de compatibilité sont susceptibles de se produire. En cas de problèmes de compatibilité, veuillez contacter un centre d’assistance clientèle agréé.

• Pour visionner le contenu haute-dé nition ou convertir le contenu des DVD standard, une prise HDMI ou HDCP DVI est requise sur votre écran.

• Certains disques BD-ROM et DVD peuvent limiter l’utilisation de certaines commandes ou fonctions.

• Vous pouvez utiliser un périphérique USB pour enregistrer des informations liées au disque, ainsi que du contenu téléchargé. Le disque que vous utilisez contrôle la durée de conservation de ces informations.

Télécommande

13Préparation

• • • • • • • • • a • • • • • • • • •

(STANDBY/ON): Pour allumer

ou éteindre le lecteur.

OPEN/CLOSE: Pour ouvrir et

fermer le tiroir.

INPUT/TUNER: Change le

mode d’entrée. BT AUDIO: Change le mode

ée pour BT AUDIO

’entr

directement. OPTICAL: Pour sélectionner

directement le mode d’entrée optique.

DISPLAY: Pour a cher ou

quitter le menu OSD.

HOME MENU: Pour a cher ou

quitter le [Menu d’accueil]. MENU: Pour accéder au menu d’un

disque. Touches de direction: P

sélectionner une option de menu

ENTER: Con rme la sélection

d’un menu.

Mise en place des piles

Retirez le couvercle des piles au dos de la télécommande, et insérez une pile R03 (taille AAA), en respectant les polarités et .

TUNE (+/-): Réglage de la station de radio de votre choix.

PRESET: Sélections programmées des radios.

• • • • • • • • • b • • • • • • • • •

RETURN: Pour quitter le menu

ou reprendre la lecture. POPUP/ TOP MENU: Pour a cher

le menu des titres d’un DVD ou le menu contextuel d’un BD-ROM, lorsqu’ils existent.

STOP: Pour arrêter la lecture.

PLAY: Pour lancer la lecture.

PAUSE/STEP: Pour mettre la

lecture en pause.

./>

chapitre, au  chier ou à la piste précédent(e) ou suivant(e).

m/M

recherche vers l’arrière ou vers l’avant.

SKIP: Pour accéder au

SCAN: E ectuer une

our

SPK LEVEL: Pour régler le volume relatif de l’enceinte souhaitée.

USB REC: enregistre un CD

audio.

MUTE: Po SOUND: Pour sélectionner un

mode d’e et sonore. VOL +/- : Pour régler le volume

général des enceintes.

• • • • • • • • • c • • • • • • • • •

Touches numériques 0-9: Sélectionne des options numérotées dans un menu.

MARKER: Pour insérer un marqueur pendant la lecture.

SEARCH: Pour a cher ou quitter le menu de recherche [Search].

désirée.

CLEAR: Pour supprimer une marque dans le menu SEARCH ou un chi re lors de la dé nition du mot de passe.

DIMMER: Pour réduire la luminosité de l’a chage de l’appareil.

ZOOM: Accède au menu du zoom. Touches de couleur

(A, B, C, D): Pour naviguer dans les

menus.

- D button: Pour sélectionner la

Touches de commande du téléviseur: voir page 67.

SLEEP: Pour dé nir un délai après

lequel l’appareil se met hors tension automatiquement.

ur couper le son.

REPEAT: Répète la section

réception mono ou stéréo en mode radio FM.

Préparation

14 Préparation

Panneau avant

Préparation

Tiroir disque

Touches de fonctionnement

Touche

STANDBY/ON

(OPEN/CLOSE)

FONCTION

Pour changer de source ou de fonction.

B/X

(PLAY / PAUSE)

(STOP)

./>

(SKIP)

- TUNE + (Réglage de station de radio)

3 4 5 6 7

Capteur infrarouge

A chage

PORTABLE IN

Prise USB

Bouton de réglage du volume

Panneau arrière

1 2 3 4 5

15Préparation

Préparation

6 7 8 9 10 11

Cordon d’alimentation secteur

À raccorder à une prise secteur.

Prises de connexion des enceintes

Ventilateur

Prise d’antenne

VIDEO OUT

AUX (L/R) INPUT

COMPONENT VIDEO (Y PB PR)

OUTPUT (PROGRESSIVE SCAN)

OPTICAL 1(TV) / 2

iPod (24 broches)

Raccordement au sabot iPod fourni.

HDMI OUT (type A, Version 1.3)

Pour raccorder un téléviseur équipé d’entrées HDMI.

Prise réseau (LAN)

16 Installation

3 Installation

Assemblez les enceintes

Connexion au haut-parleur

Installation

HTZ-BD50

Préparation des haut-parleurs

1. Fixez les tampons anti-dérapage à la base

des socles de chaque haut-parleur, du caisson de basse et du haut-parleur central.

Pour les socles de haut-parleurs :

Utilisez l’adhésif fourni pour  xer les quatre tampons moyens à la base (en bas) de chacun des socles de haut-parleur.

Tampons anti-dérapant -

middle non-skid pads

Pour le caisson de basse :

Utilisez l’adhésif fourni pour  xer quatre grands tampons à la base du caisson de basse.

moyens

Pour le haut-parleur central :

Utilisez l’adhésif fourni pour  xer quatre petits tampons à la base du haut-parleur central.

Tampons antidérapant - petits

small non-skid pads

2. Fixez les socles des haut-parleurs aux tiges en utilisant les vis fournies.

Dès que vous avez aligné la tige et la base

du socle,  xez avec les petites vis aux points indiquées ci-dessous. Notez que le hautparleur doit être face en direction de la base d’un triangle isocèle.

Arrière

Rear

large non-skid pads

Tampons anti-dérapant - grands

Avant

Front

17Installation

3. Branchez les  ls sur le lecteur.

Branchez le  l blanc avec la ligne grise sur

le côté (+) et l’autre sur le côté (–). Pour raccorder le  l d’enceinte sur le lecteur, appuyez sur chaque onglet en plastique pour ouvrir la borne de connexion. Insérez chaque  l dans la borne appropriée, puis relâcher l’onglet.

couleur (+)

Noir (–)

ATTENTION

• Ne branchez pas d’autres haut-parleurs que ceux fournis avec de système.

• Ne branchez pas les haut-parleurs fournis sur aucun autre ampli cateur que celui fourni avec ce système. Toute connexion sur un autre ampli cateur peut se traduire par un dysfonctionnement ou un incendie.

Fixez vos haut-parleurs avant et enceintes satellites

Fixez chaque haut-parleur avant et enceinte satellite avec les taquets en plastique fournis. Vissez sur crochets de support dans le mur situé derrière le haut-parleur. Passez un cordon épais autour des crochets et par le taquet en plastique a n de stabiliser le haut-parleur (véri ez bien que tout le dispositif est en mesure de supporter le poids du haut-parleur). Après l’installation, véri ez que le haut-parleur est bien  xé.

Cordon su samment épais

thick cord

Taquet en plastique

Plastic catch

ATTENTION

• Le taquet en plastique n’est pas une  xation de montage et le haut-parleur ne doit pas être directement accroché au mur avec ce taquet. Utilisez toujours un cordon pour la stabilisation du haut-parleur.

• Pioneer décline toute responsabilité en cas de perte ou de dommages dus à un assemblage et une installation incorrecte, à l’utilisation de matériaux d’installation insu samment robustes, à une mauvaise utilisation ou à des catastrophes naturelles.

• Lors du placement de cet appareil, veillez à ce qu’il soit installé de telle sorte qu’il ne risque pas de tomber ni de causer des blessures dans l’éventualité d’une catastrophe naturelle (comme un tremblement de terre).

Installation

18 Installation

Connexion au haut-parleur HTZ-BD30

Préparation des haut-parleurs

1. Fixez les tampons anti-dérapage à la base

de chaque haut-parleur.

Pour les socles de haut-parleurs :

Utilisez l’adhésif fourni pour  xer les quatre petits tampons à la base (en bas) de chacun des socles de haut-parleurs.

samll non-skid pads

Installation

Pour le caisson de basse :

Utilisez l’adhésif fourni pour  xer quatre grands tampons à la base du caisson de basse.

Tampons anti-dérapant – petits

Pour le haut-parleur central :

Utilisez l’adhésif fourni pour  xer quatre petits tampons à la base du haut-parleur central.

Tampons anti-dérapant – petits

samll non-skid pads

2. Branchez les  ls sur le lecteur.

Branchez le  l blanc avec la ligne grise sur

couleur (+)

Tampons anti-dérapant – grands

large non-skid pads

Noir (–)

19Installation

Montage mural du haut-parleur central

Le haut-parleur central dispose d’un trou de montage qui permet de  xer le haut-parleur au mur.

Avant le montage

Rappelez-vous que le système de haut-parleurs est lourd et que son poids pourrait fragiliser la  xation des vis au mur, ou que le matériau du mur pourrait ne pas résister au poids du hautparleur qui risquerait de tomber. Véri ez que le mur sur lequel vous prévoyez de monter les haut-parleurs est su samment robuste pour supporter le poids du haut parleur. N’e ectuez pas de montage sur du contre-plaqué ou des cloisons à surface fragile.

Les vis de montage ne sont pas fournies. Utilisez des vis appropriées au matériau du mur et capable de supporter le poids des haut-parleurs.

ATTENTION

• Si vous n’êtes pas sûr de la qualité et de la robustesse de la cloison, demandez conseil à un professionnel.

• Pioneer ne peut pas être tenu pour responsable d’accidents ou de dommage dus à une installation incorrecte.

Vis de montage

Mounting screw

(non fournies)

(not supplied)

De 5 mm à 7 mm

5 mm

10 mm

Remarque supplémentaire à propos du placement des haut-parleurs

Installez les haut-parleurs principaux avant gauche et droit à égale distance de votre téléviseur.

Précautions:

Veillez à bien torsader ensemble tous les  ls nus des haut-parleurs et de les insérer complètement dans la borne du haut-parleur. Si un des  ls nus de haut-parleur touche le panneau arrière, cela peut provoquer une coupure de l’alimentation à titre de mesure de sécurité.

Les haut-parleurs avant, central et enceintes satellites fournis avec ce système sont blindés magnétiquement. Toutefois, selon l’emplacement de l’installation, une distorsion des couleurs peut apparaître sur l’écran de votre téléviseur si vous avez installé le hautparleur vraiment trop près de celui-ci. Si c’est le cas, éteignez votre téléviseur, puis allumezle après avoir patienté entre 15 et 30 minutes. Si le problème persiste, éloignez le système de haut-parleurs de votre téléviseur.

Le caisson de basse n’est pas blindé magnétiquement et ne doit donc pas être placé à proximité d’un téléviseur ou d’un moniteur. Les supports de stockage magnétiques (comme des disquettes, les bandes et cassettes vidéo) ne doivent pas être rangés à proximité du caisson de basse.

Ne  xez pas les haut-parleurs avant/enceintes satellites et le caisson de basse à un mur ou au plafond. Ils peuvent tomber et causer des blessures.

Installation

20 Installation

Positionnement du système

L’illustration ci-dessous montre un exemple d’installation du système de cinéma à domicile. Les illustrations utilisées dans ce guide d’utilisation peuvent di érer de votre système et elles ne sont présentées qu’à titre indicatif. Pour obtenir un son surround optimum, toutes les enceintes autres que le subwoofer doivent être placées à la même distance ( position d’écoute.

Installation

Enceinte avant-gauche (L)/ Enceinte avant-droite (R) :

Placez les enceintes avant de part et d’autre de l’écran du moniteur ou du téléviseur, et si possible dans l’alignement de la surface de l’écran.

Enceinte centrale :

Placez l’enceinte centrale au-dessus ou en dessous du moniteur ou de l’écran du téléviseur.

Enceinte surround (arrière) gauche (L)/ Enceinte surround (arrière) droite (R) :

Placez ces enceintes derrière la position d’écoute, en les orientant légèrement vers l’intérieur.

) de la

Subwoofer (caisson de graves) :

La position du subwoofer n’est pas essentielle, car les sons graves ne sont pas très directionnels. Néanmoins, il est conseillé de placer le subwoofer à proximité des enceintes avant. Orientez-le légèrement vers le centre de la pièce a n de réduire les ré exions sur les murs.

Unité principale

ATTENTION

• Veillez à ce que les enfants n’introduisent pas leurs mains dans les *évents des enceintes. *Évent d’enceinte : ouverture à l’arrière des enceintes pour améliorer le rendu des sons graves.

• Placez l’enceinte centrale hors d’atteinte des enfants. Sinon, l’enceinte pourrait être endommagée et/ ou provoquer des dommages matériels et/ou des blessures.

• Les haut-parleurs contiennent des parties magnétiques et donc des irrégularités de couleurs peuvent apparaître sur l’écran de votre téléviseur ou de votre moniteur. Éloignez les haut-parleurs de votre écran TV ou de votre moniteur PC.

21Installation

Raccordements à votre téléviseur

E ectuez les raccordements suivants, selon les capacités de votre équipement.

• Connexion HDMI (pages 21-22)

• Branchement Composant Vidéo (page 22)

• Connexion vidéo (page 23)

REMARQUE

• Il existe di érentes manières de connecter l’appareil, selon les caractéristiques de votre téléviseur et des autres équipements à raccorder. Utilisez seulement une des connexions décrites dans ce guide.

• Veuillez vous reporter au guide d’utilisation de votre téléviseur, système audio ou autres équipements pour choisir les modes de connexion les mieux appropriés.

• Veillez à ce que l’appareil soit connecté directement au téléviseur. Réglez le téléviseur sur le canal d’entrée vidéo correct.

• Ne connectez pas l’appareil via un magnétoscope. L’image pourrait être déformée par le système de protection contre la copie.

Connexion HDMI

Si vous avez un moniteur ou un téléviseur HDMI, vous pouvez le raccorder à ce lecteur à l’aide d’un câble HDMI (Type A, Version 1.3). Raccordez la prise de sortie HDMI OUT de l’appareil à la prise d’entrée HDMI IN d’un téléviseur ou d’un moniteur compatible HDMI.

Connexion HDMI

Lecteur

Player

Réglez la source du téléviseur sur HDMI (rapportez-vous au mode d’emploi de votre téléviseur).

Installation

22 Installation

REMARQUE

• Modi er la résolution une fois le branchement

établi peut provoquer des mauvais fonctionnements. Pour solutionner le problème, éteignez puis rallumez le lecteur.

• Lorsque la connexion HDMI / HDCP n’est pas

reconnue, l’écran du téléviseur devient noir. Dans ce cas, véri ez la connexion HDMI ou débranchez le câble HDMI.

• En cas de bruits parasites ou lignes indésirables

à l’écran, véri ez le câble HDMI (la longueur du câble ne doit généralement pas dépasser 4,5 m et vous devez utiliser un câble HDMI haut-débit

Installation

(version 1.3).

• Si un équipement HDMI connecté n’accepte pas

le signal de sortie audio de l’appareil, le son au niveau de l’équipement HDMI peut être distordu ou inexistant.

• Lorsque la connexion HDMI est utilisée, vous

pouvez modi er la résolution du signal de sortie HDMI. (Consultez la section “Réglage de la résolution”, page 23.)

• Sélectionnez le type de sortie vidéo au niveau

de la prise HDMI OUT à l’aide de l’option [Rég. couleur HDMI] du menu de con guration [Con g.] (voir page 34).

• Lorsque vous raccordez un dispositif HDMI ou

DVI compatible, veilllez à véri er ce qui suit:

- Essayez d’éteindre l’appareil HDMI/DVI et ce lecteur. Ensuite, rallumez l’appareil HDMI/DVI et laissez-le pendant 30 secondes, puis rallumez le lecteur.

- L’entrée vidéo du dispositif raccordé est correctement réglée pour cette unité.

- L’appareil connecté est compatible avec les entrées vidéo 720x576p (480p), 1280x720p, 1920x1080i ou 1920x1080p.

• Il est possible que certains périphériques HDMI

ou DVI compatibles HDCP ne fonctionnent pas avec cet appareil.

- L’image ne s’a chera pas bien avec le dispositif non-HDCP.

- L’appareil n’e ectue pas la lecture et l’écran du téléviseur devient noir.

Branchement Composant Vidéo

Raccordez les prises COMPONENT VIDEO OUT de l’appareil avec les prises correspondantes du téléviseur, à l’aide de câbles Y Pb Pr. Vous pouvez entendre le son sortir des enceintes du système.

Connexion en composantes

Lecteur

Player

VIDEO

AUX

COMPONENT

VIDEO

INPUT

OUTPUT

Vert

Green Blue

Bleu

Red

Rouge

REMARQUE

Lorsque vous utilisez un branchement COMPONENT VIDEO OUT, vous pouvez modi er la résolution de la sortie. (Voir “Réglage de la résolution” page 23.)

23Installation

Connexion vidéo

Reliez les prises de sortie VIDEO OUT du lecteur avec les prises d’entrées correspondantes de la télévision à l’aide d’un câble vidéo. Vous pouvez entendre le son sortir des enceintes du système.

Connexion vidéo

Lecteur

VIDEO

AUX

COMPONENT

VIDEO

INPUT

OUTPUT

Yellow

Jaune

Réglage de la résolution

L’appareil o re plusieurs résolutions de sortie au niveau des prises HDMI OUT et COMPONENT VIDEO OUT. Vous pouvez modi er la résolution à l’aide du menu de con guration [Con g.].

1. Appuyez sur la touche HOME MENU (

2. Utilisez les touches I/

i/U/u

pour sélectionner [Con g.], puis appuyez sur ENTER (

). Le menu [Con g.] apparaît.

3. Utilisez U/u pour sélectionner l’option

[AFFICHAGE] puis appuyez sur i pour aller au second niveau.

4. Utilisez les touches U/u pour sélectionner

l’option [Résolution] puis appuyez sur ENTER (

) ou i pour accéder au troisième

niveau de menu.

Installation

5. Utilisez U/u pour sélectionner la résolution

souhaitée puis appuyez sur ENTER ( ) pour con rmer votre sélection.

REMARQUE

• Si votre téléviseur n’accepte pas la résolution que vous avez dé nie sur l’appareil, vous pouvez régler la résolution sur 576p (480p), en procédant comme suit :

1. Appuyez sur la touche Z pour ouvrir le tiroir

disque.

2 Appuyez sur la touche x pendant au moins

5 secondes.

• Étant donné que di érents facteurs peuvent a ecter la résolution du signal de sortie vidéo, veuillez consulter la section “Résolution des sorties vidéo”, en page 70.

24 Installation

Connexion des antennes

Branchez les antennes FM fournies pour écouter la radio.

Connexion des antennes

Installation

Lecteur

Player

Connexions avec un équipement externe

Connexion AUX

Vous pouvez utiliser vos équipements audio externes en les raccordant à l’unité principale.

Raccordez les sorties audio analogiques de votre équipement externe aux prises d’entrée AUX L/R (INPUT) de l’unité principale. Puis sélectionnez le mode d’entrée [AUX] en appuyant sur les touches INPUT/TUNER, I/i et ENTER (

Connexion AUX

Lecteur

Player

VIDEO

AUX

COMPONENT

VIDEO

INPUT

REMARQUE

Après avoir raccordé l’antenne  laire FM, placez-la en position la plus horizontale possible. Veillez à ce que l’antenne  laire FM soit bien étendue.

Rouge

Red

Blanc

White

To the audio output jacks

Vers les prises de sortie audio

of your component

de l’équipement externe

(TV, VCR, etc.)

(TV, magnétoscope, etc.)

25Installation

Connexion PORT. IN

Vous pouvez utiliser un équipement audio portable en le raccordant à l’unité principale.

Pour cela, raccorder la prise casque (ou sortie ligne) de l’équipement audio portable à la prise PORT IN de l’unité principale. Puis sélectionnez le mode d’entrée [PORTABLE] en appuyant sur les touches INPUT/TUNER, I/i et ENTER (

Connexion PORT.IN

Connexion OPTICAL IN 1/2

Vous pouvez utiliser un équipement audio externe en le raccordant à l’unité principale via la connexion optique numérique.

Raccordez la prise de sortie optique de l’équipement externe aux prises OPTICAL IN 1/2 de l’unité principale. Puis sélectionnez le mode d’entrée [OPTICAL 1/2] en appuyant sur les touches INPUT/TUNER, I/i et ENTER

). Ou appuyez sur la touche OPTICAL pour

( sélectionner directement l’entrée optique.

Connexion optique

Installation

Vers la sortie optique

To the digital

numérique de

Lecteur MP3, etc.

twZGSGUUU

optical output jack

l’équipement externe

of your component

26 Installation

Connexion Bluetooth®

À propos de Bluetooth

Bluetooth® est une technologie de communication sans  l dédiée à des connexions à courte distance.

La portée accessible est inférieure à 10 mètres. (Le son peut être interrompu si la connexion interfère avec d’autres ondes électroniques ou si vous connectez votre dispositif bluetooth dans d’autres pièces.) La connexion de périphériques individuels en employant la technologie sans  l Bluetooth n’entraîne aucune charge supplémentaire. Vous pouvez faire fonctionner un téléphone

Installation

mobile équipé de la technologie sans  l Bluetooth via la Cascade si la connexion a été réalisée au moyen de la technologie sans  l Bluetooth.

Équipements pris en charge : téléphone mobile, MP3, ordinateur portable, assistant numérique personnel (PDA) (ces appareils acceptent les écouteurs stéréo).

Pro ls Bluetooth

Pour utiliser la technologie sans  l, les appareils doivent être capables d’interpréter certain pro ls. Cet appareil est compatible avec le pro l suivant.

A2DP (Advanced Audio Distribution Pro le pro l de distribution audio avancée)

1. Sélectionnez la fonction Bluetooth à l’aide

de la touche INPUT/TUNER ou BT AUDIO. “BT AUDIO”, puis “BT READY” apparaissent sur la fenêtre d’a chage.

2. Faites fonctionner l’équipement Bluetooth

et exécutez la procédure d’appariement. En e ectuant la recherche de cet appareil avec l’équipement Bluetooth, selon le type d’équipement Bluetooth, la liste des équipements trouvés peut apparaître sur l’a chage de l’équipement Bluetooth . Votre appareil apparaît sous l’appellation “PIONEER AUDIO”.

3. Entrez le code PIN.

Code PIN : 0000

4. Lorsque cet appareil est correctement

apparié avec votre équipement Bluetooth, la LED Bluetooth de cet appareil s’allume et “BT SINK” apparaît.

REMARQUE

Selon le type de votre équipement Bluetooth, certains appareils peuvent avoir des méthodes d’appariement di érentes.

5. Écoute de morceaux de musique.

Pour écouter de la musique enregistrée sur votre équipement Bluetooth, reportez-vous au mode d’emploi de votre équipement Bluetooth.

Écoute de morceaux de musique d’un équipement Bluetooth

Appariement de votre appareil avec l’équipement Bluetooth

Avant de démarrer la procédure d’appariement, véri ez que la fonction Bluetooth est activée sur votre équipement Bluetooth. Pour plus d’informations, reportez-vous au mode d’emploi de votre équipement Bluetooth. Une fois l’appariement réalisé, il ne sera plus nécessaire de l’e ectuer à l’avenir.

REMARQUE

• Si vous changez le fonctionnement de l’appareil,

la fonction Bluetooth est déconnectée, vous devez alors refaire l’appariement.

• AVRCP n’est pas accessible dans ce mode.

Pioneer XV-BD707, S-BD30, HTZ-BD50, S-BD50T, HTZ-BD30 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual