Page 1
USER MANUAL OF SMART AC
CS374U-APP(OSK102)
16122000002774
20160524
Company will not be liable for any issues
and problems caused by Internet, Wi-Fi
Router and Smart Devices. Please contact
the original provider to get further help.
NOTE:
IMPORTANT NOTE:
Read the manual carefully before installing or
connecting your Smart kit. Make sure to save
this manual for future reference.
Page 2
CONTENTS
Model: OSK102
Standard:IEEE 802.11b/g/n
Antenna Type:Wxternal omnidirectional Antenna
Frequency:WIFI 2.4G
Maximum Transmitted Power: 15dBm Max
OOO O
Operation Temperature:0 C~45 C/32 F~113 F.
Operation Humidity:10%~85%
Power Input:DC 5V/300mA
1
2
SPECIFICATION
PRECAUTIONS
1
SPECIFICATION...................................................1
PRECAUTIONS....................................................1
DOWNLOAD AND INSTALL APP ...........................2
INSTALL THE SMART KIT .....................................3
USER REGISTRATION .........................................4
NETWORK CONFIGURATION ...............................5
HOW TO USE APP ..............................................13
SPECIAL FUNCTIONS ........................................15
2
3
4
5
6
7
8
1
Applicable system: IOS, Android.
(Suggest:IOS 7.0, Android 4.0)
Note:
APP can not support the lastest software version of
Android and IOS system.
Due to special situation may be occured, we explicitly
claims below: Not all of the Andriod and IOS system
are compatible with APP. We will not be responsible
for any issue as a result of the incompatibility.
Wireless safety strategy
Smart kit only support WPA-PSK/WPA2-PSK encryption
and none encryption . WPA-PSK/WPA2-PSK encryption
is recommended.
Caution
Please Check The Service Website For More Information.
Smart Phone camera needs to be 5 million pixels or
above to make sure scan QR code well.
Due to different network situation, sometimes, request
Hereby, we declare that this AC is in compliance
with the essential requirements and other relevant
provisions of Directive 1999/5/EC. The declaration
of conformity may be consulted with sales agent.
DECLARATION OF CONFORMITY
Page 3
DOWNLOAD AND INSTALL APP
INSTALL THE SMART KIT
3
4
2 3
Remove the protective cap of the smart kit
Open the front panel and insert the smart kit into
the reserved interface.
Insert
Attach the QR code packed with SMART KIT to the
side panel of the machine, ensure it is convenience
to be scanned by the mobile phone. Alternatively,
user can take picture of the QR Code and save in
into their own phone.
1
2
3
Due to different network situation, control process may
return time-out sometimes. If this situation occurs, the
display between board and App may not be the same,
please do not feel confused.
NOTE:Company will not be liable for any issues and
problems caused by Internet, Wi-Fi Router and Smart
Devices. Please contact the original provider to get
further help.
Android Phone users: scan QR Code A or go to google
play, search 'Nethome Plus' app and download it.
Iphone Users: scan QR Code B or go to App Store,
search 'Nethome Plus' app and download it.
Caution: QR Code A and QR Code B is only available
for downloading APP.
QR Code A
QR Code B
WARNING:This interface is only compatible with
SMART KIT provided by the manufacturer.
time-out could happen, thus, it is necessary to do
network configuration again.
Page 4
USER REGISTRATION
NETWORK CONFIGURATION
5
6
4 5
,
,
,
,
1
2
1
2
2
3
4
Click Create Account
Enter your email address
and password, and then
click Registration .
08:42
20:14
VI50828_a
Creat Accout
Forgot password?
Chenwt1@midea.com.cn
Enter your E-mail address
Password
I have read and agree to the terms of service
65%
61%
Sign in
Registration
Sign up
Please ensure your mobile device is connected to Wifi
router. Also, the Wifi router has already connected to
Internet before doing user registration and network
configuration.
It is better to log in your email box and active your
registration account by clicking link in case you forget
the password.
Caution:
It is necessary to forget any other around network and
make sure the Android or IOS device just connect to
the WIFI network you want to configure.
Make sure the Android or IOS device WIFI function
works well and can be connected back to your original
WIFI network automatically.
Kindly reminder:
'
'
'
'
When AC enters into AP mode, the air-conditioning
remote controller can't control it. It is necessary to
finish network configuration or power the AC again
in order to control it. Alternatively, you need to wait
8 minutes to let the AC quit AP mode automatically.
Using Android device to do network configuration
Make sure your mobile device has already been
connected to the wifi network which you want to use.
Also, you need to forget other irrelative wifi network in
case it influences your cofiguration process.
Disconnect the power supply of AC.
Connect the power supply of AC, and continuously
press the digital display button or do not disturb button
seven times in 3 minutes.
When the AC displays AP , it means that the AC WIFI
has already entered into AP Mode.
'
'
'
'
Some type of AC do not need the step to be in AP
mode
Page 5
6 7
5
Press + Add Device
,
,
6
7
8
9
Scan QR Code which
is packed with smart kit
Select your own WiFi
network, for example
My Home (the picture
is only for reference)
Enter your own WiFi
router password and
click OK;
Configuration Success,
you can see the device
on the list.
Home
Nong Jun
User name
+
Add Device
20:14
Align the QR code within the frame to scan
The first press of restart
61%
QR Code Pictures
My Home
Password
Cisco
Belkin
20:14
Air conditioner want to use your WiFi
61%
Network OK
Home
User
+
Oasis
Add Device
Page 6
8 9
6
Scan QR Code which
is packed with smart kit
5
Press + Add Device
,
,
,
,
7
Read the instruction
above and press the
Home button to return
to the device interface.
Click settings to enter
the setting page,select
WLAN/WIFI.
8
Search and connection
Settings
Airplane Mode
WLAN
Bluetooth
Cellular
On
Off
Connect to WIFI AC hot spot:
Return to the setting page of IOS Device > Click
WLAN > Select net_ac_xxxx > Return to the
current page.
Password: 12345678
SSID: net_ac_xxxx
Using IOS device to do network configuration
Mak sure your mobile device has already been
connected to the wifi network which you want to use.
Also, you need to forget other irrelative wifi network in
case it influences your cofiguration process.
Disconnect the power supply of AC(some units).
Connect the power supply of AC, and continuously
press the digital display button or do not disturb button
seven times in 3 minutes.
When the AC displays AP , it means that the AC WIFI
has already entered into AP Mode.
'''
'
20:14
61%
Settings
Airplane Mode
WLAN
Smart
Bluetooth
Off
Cellular
Off
VPN
Notifications
Control Center
Do Not Disturb
General
Home
Nong Jun
User name
+
Add Device
20:14
Align the QR code within the frame to scan
The first press of restart
61%
QR Code Pictures
1
2
3
4
Page 7
Type defult password:
12345678 and click
"Join "
Return to APP and
click Next
Choose net_ac_XXXX
9
10
12
11
13
Select your own WiFi
network, for example
My Home (the picture
is only for reference)
Enter your own WiFi
router password and
click OK;
Settings WLAN
CHOOSE A NET WORK.....
ASUS-5GX
ASUS-2.4GX
bdptest1
bdptest1-5G
HIWIFI-22EF60
Midea
midea_fc_6866
MideaACIOT
net_ac_0010
zztest
20:14
61%
10
11
Search and connection
Settings
Airplane Mode
WLAN
Bluetooth
Cellular
On
Off
Connect to WIFI AC hot spot:
Return to the setting page of IOS Device > Click
WLAN > Select net_ac_xxxx > Return to the
current page.
Password: 12345678
SSID: net_ac_xxxx
Joining "net_ac_0010" ....
20:14
61%
Cancel
Join
Enter Password
Password
My Home
Password
Cisco
Belkin
20:14
Air conditioner want to use your WiFi
61%
Network OK
Page 8
12
13
14
Configuration Success,
you can see the device
on the list.
HOW TO USE APP
7
Please ensure both your mobile device and air
conditioner are connected to the Internet before
using app to control the air conditioner via internet,
please follow the next steps:
1 2
Type your own account
and password, Click
"Sign in "
Select the target air
conditioner to enter
into the main control
interface.
NOTE:
User
Oasis
Premier
Add Device
Home
User
+
Oasis
Add Device
08:42
VI50828_a
Creat Accout
Forgot password?
Chenwt1@midea.com.cn
65%
Sign in
When finishing network configuration, APP will
display success cue words on the screen.
Due to different internet environment, it is possible
that the device status still display offline . If this
situation occurs, it is necessary to pull and refresh
the device list on the APP and make sure the device
status become online . Alternatively, user can
turn off the AC power and turn on it again, the device
status will become online after few minutes.
,
,
,
,
,
,
,
,
,
,
,
,
Page 9
14
15
3
Thus, user can control
air conditioners on/off
status, operation mode,
temperature, fan speed
and so on.
SPECIAL FUNCTIONS
8
Timer on/ Timer off
Weekly, user can make an appointment to turn on or
off AC on specific time. User also can choose
circulation to keep the AC under schedule control
every week.
NOTE:
Not all the function of the APP is available on air
conditioner. For example: ECO, Turbo, Left and Right
Swing, Up and Down swing function, please check
the user manual to find more information.
O
Including: Timer on, Timer off, 8 C Heat, Sleep,
Check.
NOTE: If the air conditioner do not support the above
function, the function will be hided from the function
list.
Timer On
Mon. Tues.
18:00
Timer Off
Mon. Tues.
02:00
o
8 Heating
Sleep
Check
Timer On
Mon. Tues.
18:00
Timer Off
Mon. Tues.
02:00
o
8 Heating
Sleep
Check
Page 10
16
17
O
8 CHeat
O
User can let the AC run under 8 C Heat by one-click.
When people go outisde, this function can protect
your furniture from frost damage.
09
10
11
08 48
49
50
51
Repeat Mon,Tue
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Timer On
Mon. Tues.
18:00
Timer Off
Mon. Tues.
02:00
o
8 Heating
Sleep
Check
Page 11
18
19
Sleep
User can customize their own comfortable sleep
by setting target temperature.
Check
User can simply check the AC running status with
this function. When finishing this procedure, it can
display the normal items, abnormal items, and
detail information.
edit
young
Elder
Children
Timer On
Mon. Tues.
18:00
Timer Off
Mon. Tues.
02:00
o
8 Heating
Sleep
Check
Testing
97
97
Normal
0
Abonormal
Page 12
20
CAUTIONS
This device complies with Part 15 of the FCC Rules
and RSS 210 of Industry & Science Canada. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Only operate the device in accordance with the
instructions supplied. This device complies with FCC
and IC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the
possibility of exceeding the FCC and IC radio frequency
exposure limits, human proximity to the antenna shall
not be less than 20cm (8 inches) during normal operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Abnormal:0
Normal:97
Compressor frequency
Compressor current
Outdoor machine current
Evaporator temperature
Condenser temperature
Exhaust temperature
Outdoor temperature
21
Loading...