Pioneer MNS-1 Service manual

ORDER NO.
RRV2349
M-NS1
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
M-NS1
DBDXJ AC110–127V/220–230V/240V With the voltage selector
DLXJ/NC AC110–120V/220–230V/240V With the voltage selector
YPWXJ AC240V ––––––––––
This product is a system(s) component.
This product does not function properly independently ; to avoid malfunctions, be sure to connect it to the prescribed system component(s), otherwise damage may result.
Please connect it to the STEREO CD TUNER XC-NS1 for adjustment and operation
inspection.
The voltage can be converted by the following method.Power RequirementType
Component Model Service manual Remarks
STEREO CD TUNER XC-NS1 RRV2348 (RRV2341) STEREO POWER AMPLIFIER M-NS1 RRV2349 (RRV2321) This manual. SPEAKER SYSTEM S-NS1-LRW RRV2371 Except YPWXJ type
MINIDISC RECORDER MJ-NS1 RRV2363
This service manual should be used together with the following manual(s).
Model No. Order No. Remarks
M-F10/MYXJ RRV2321
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2000
T–ZZA AUG. 2000 Printed in Japan
M-NS1
1. CONTRAST OF MISCELLANEOUS PARTS
NOTES : Parts marked by “ NSP ” are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Screws adjacent to mark on the product are used for disassembly. Reference Nos. indicate the pages and Nos. in the service manual for the base model. When ordering resistors, first convert resistance values into code form as shown in the following examples. Ex. 1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by
J = 5%, and K = 10%). 560 = 56 × 10 47k = 47 × 10
0.5 = R50 ...................................................................... RN2H Â 5 0 K
1 = 1R0 ......................................................................... RS1P 1 Â 0 K
Ex. 2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k = 562 × 10 1 = 5621 ........................................... RN1/4PC 5 6 2 1 F
CONTRAST TABLE
M-NS1/DBDXJ, DLXJ/NC, YPWXJ and M-F10/MYXJ are constructed the same except for the following:
Ref.
Mark
No.
NSP AMP MAIN Assy AWM7499 AWM7525 AWM7525 AWM7526
P6–2 PRIMARY Assy AWU7557 AWU7611 AWU7611 AWU7612
P4–1 Paper Pattern AAX7807 Not used Not used AAX7807 P4–2 System Cable (20P) ADE7057 Not used Not used ADE7057 P4–3 AC Power Cord ADG1154 Not used Not used ADG1160 P4–5 FM Wire Antenna ADH7005 Not used Not used ADH7004 P4–6 Operating Instructions ARC7301 Not used Not used Not used
P4–7 Operating Instructions ARE7264 Not used Not used Not used
P4–7 Operating Instructions (English) Not used Not used Not used ARB7227 P4–8 Errata ARX7037 Not used Not used ARX7037
P4–9 NSP Warranty Card ARY7022 Not used Not used ARY7027 P4–10 AM Loop Antenna ATB7009 Not used Not used ATB7009 P4–11 Ferrite Core ATX7007 Not used Not used ATX7007 P4–12 Remote Control Unit AXD7271 Not used Not used AXD7271
P4–14 Stand A AXG7096 Not used Not used AXG7096 P4–15 Stand B AXG7097 Not used Not used AXG7097 P4–16 P4–17 Vinyl Bag (115 × 270 × 0.05) Z21–013 Not used Not used Z21–013 P4–18 NSP Polyethylene Bag (0.03 × 230 × 340) Z21–038 Not used Not used Z21–038
P4–21 Spacer A AHB7037 Not used Not used AHB7037 P4–22 Packing Case AHD7941 AHD7948 AHD7907 AHD7908
P6–7 Power Transformer (T1) ATS7278 ATS7282 ATS7282 ATS7282 P6–8 Fuse (FU1) REK1025 REK1028 REK1028 REK1025
P6–10 Rear Panel ANC7935 ANC7936 ANC7968 ANC7969 P6–28 NSP Label ARW7101 Not used Not used Not used
P6–29 Caution Label ARW7112 ARW7114 ARW7114 ARW7114 P6–36 NSP Fuse Card Not used AAX7099 AAX7099 Not used No.2
NSP
Notes: The numbers in the remarks column correspond to the numbers on the " EXPLODED VIEWS ".
Symbol and Description
PCB ASSEMBLIES
PACKING
(Dutch/Swedish/Spanish/Portuguese)
(English/French/German/Italian)
Lithium Battery (CR2025) VEM1009 Not used Not used VEM1009
EXTERIOR
Fuse (T2AL250V, FU2, FU3) Not used REK1025 REK1025 Not used No. 1
Label Not used ARW7104 ARW7105 ARW7106
1
= 561................................................... RD1/4PU 5 6 1 J
3
= 473 .................................................. RD1/4PU 4 7 3 J
Part No.
M-F10 M-NS1 M-NS1 M-NS1
MYXJ DBDXJ DLXJ/NC YPWXJ
(T2AL250V) (T4AL250V) (T4AL250V) (T2AL250V)
Remarks
2
Loading...
+ 2 hidden pages