|
|
EN |
|
Pedaling Monitor Sensor |
|
DE |
|
|
FR |
||
SGY-PM910H |
|
||
User's Manual |
NLE |
||
|
|||
|
|
||
|
|
IT |
|
|
|
ES |
Please read the Important Information for the User in the product box for product warnings and other important safety information.
EN
Introduction
Table of Contents |
|
Introduction |
|
Features................................................................................................................... |
3 |
Manuals................................................................................................................................... |
3 |
Compatibility............................................................................................................. |
4 |
Getting Started |
|
Product Configuration.............................................................................................. |
5 |
Accessories............................................................................................................................. |
5 |
Installing and Removing the Batteries/Switching Modes........................................ |
7 |
Pairing /Calibration |
|
Pairing with the Cyclocomputer.............................................................................. |
10 |
Calibrating the Sensors........................................................................................... |
12 |
Getting Ready........................................................................................................................ |
12 |
Calibrating the Zero Point...................................................................................................... |
12 |
Checking the Zero Point........................................................................................................ |
13 |
Calibrating in Power Meter Mode.......................................................................................... |
13 |
Specifications and support |
|
Troubleshooting....................................................................................................... |
14 |
Care, Maintenance, and Storage............................................................................ |
16 |
Specifications.......................................................................................................... |
17 |
This product is ANT+™ certified. |
|
Visit http://www.thisisant.com/directory/ for a list of compatible |
|
products and apps. |
|
2
Features
This product is a sensor system that analyzes the pedaling of a bicycle in real time. It calculates the direction and intensity of the force acting on the pedals and calculates pedaling efficiency.
Description of components
•• Strain gauge unit: Detects the strain on the crank and calculates the direction and intensity of the force on the crank.
•• Magnet: Used to detect the angle of rotation.
•• Transmitters: Send information from the strain gauge unit and the magnet to the Cyclocomputer.
Switching modes
The switch in the right transmitter changes the system to the following modes.
•• Pedaling mode: Used in combination with the Cyclocomputer SGX-CA500/
CA900. This mode calculates pedaling efficiency and maximizes the functionality of the product.
•• Power meter mode: Used with a Cyclocomputer that supports ANT+™.
Manuals
The product’s manuals consist of this User’s Manual, an Installation Manual, and Important Information for the User.
•• User’s Manual:
Explains how to pair the product with the Cyclocomputer and calibrate the sensors.
•• Installation Manual:
[For American Users] http://www.pioneerelectronics.com [For Canadian Users] http://www.pioneerelectronics.ca [For European Users] http://www.pioneer.eu
Explains details about handling methods. The product installation methods (for dealers) are also described as references.
•• Important Information for the User:
Important Information for the User provides detailed information related to safety.
EN
Introduction
3
EN
Introduction
Compatibility
Crank sets
The product is compatible with the following crank sets.
Crank sets |
Remarks |
SHIMANO FC-9000 |
•• Crank lengths of 165, 167.5, 170, 172.5, 175 mm, crank set |
|
of 50-34T, 52-36T, 52-38T, 53-39T, 54-42T, 55-42T are |
|
compatible. * |
FC-6800 |
•• Crank lengths of 165, 170, 172.5, 175 mm, crank set of 50- |
|
34T, 52-36T, 53-39T are compatible. * |
* Descriptions in this manual are for a 170 mm crank set.
This product is designed to be used for recreational cycling and cycle training applications only and is not designed to withstand racing conditions. Additionally, this product is designed to be used while cycling on paved roads
only. Any damage or malfunction arising from use in racing or riding on dirt roads, cobblestone or any other unpaved roads will not be covered by the manufacturer’s limited warranty.
Installing and calibrating the product requires specialized techniques and tools. Ask the shop where you bought the product to install and calibrate it.
4
Product Configuration
Accessories
This product contains the following parts.
Pedaling monitor sensor (right side)
Right transmitter
Junction cable
Strain gauge unit
Junction box Pedaling monitor sensor part (right side) x 1
For FC-9000
Chain ring adapter x 1
For FC-6800
Strain gauge unit cover (right side) x 2
EN
Started Getting
5
EN |
Product Configuration |
|
|
|
|
|
|
|
Started Getting
Pedaling monitor sensor (left side)
Left transmitter Strain gauge unit
Pedaling monitor sensor part (left side) x 1
Magnet
Magnet x 2
Accessories
Phillips-head screws x 10
User's Manual (this document)
Batteries (CR2032) x 2
Warranty Card
Important Information for the User
6
Loading...