Pioneer FH-P8800 Operating Manual

Multi-CD control DSP High power CD Cassette player with FM/AM tuner

Syntoniseur FM/AM-CD-cassette, puissante amplification, contrôleur DSP pour lecteur CD à chargeur

Operation Manual

FH-P8800

Mode d’emploi

ENGLISH

FRANÇAIS ESPAÑOL

Contents

Dear Customer ............................................ 3

Key Finder .................................................... 4

Head Unit (Close)

Head Unit (Open)

Remote Controller

Remote Controller and Care .................... 6

Using the Remote Controller ............................ 6

Batteries ............................................................ 6

Before Using This Product ...................... 7

About This Product .......................................... 7

About This Manual ............................................ 7

About Display Indications

Important .......................................................... 7

Resetting the Microprocessor ............................ 7

Precaution .......................................................... 8

After-sales Service for Pioneer Products .......... 8

Basic Operation ........................................ 9

To Listen to Music ............................................ 9

Setting the Display Angle .............................. 10

Basic Operation of Tuner ................................ 11

Manual and Seek Tuning

Preset Tuning

Band

Basic Operation of Built-in CD Player .......... 12

Eject

Disc Loading Slot

Track Search and Fast Forward/Reverse

Basic Operation of Cassette Player ................ 13

Open/Eject

Direction Change

Fast Forward/Rewind and Music Search

Cassette Loading Slot

Basic Operation of Multi-CD Player .............. 15

Track Search and Fast Forward/Reverse

Disc Search

Disc Number Search

(for 6-Disc, 12-Disc types) Corresponding Display Indications and

Buttons ...................................................... 16

Entering the Function Menu ............................ 17

Function Menu Functions ................................ 17

Entering the Detailed Setting Menu ................ 19

Detailed Setting Menu Functions .................... 20

Tuner Operation ...................................... 21

Local Seek Tuning (LOCAL)

Best Stations Memory (BSM)

Using the Built-in CD Player .................. 22

Repeat Play (REPEAT)

Random Play (RANDOM)

Scan Play (T.SCAN)

Pause (PAUSE)

Compression and DBE (COMP/DBE)

Disc Title Input (TITLE IN)

Displaying Disc Title

CD TEXT Function ........................................ 24

Using the Cassette Player ...................... 25

Repeat Play (REPEAT)

Scan Play (SCAN)

Blank Skip (B.SKIP)

Radio Intercept (RI)

Dolby B NR (B NR)

Using Multi-CD Players .......................... 27

Repeat Play (REPEAT)

Random Play (RANDOM)

Scan Play (SCAN)

Pause (PAUSE)

ITS (Instant Track Selection) .......................... 29

ITS Programming (ITS)

ITS Play (ITS.PLAY)

Erase a Track Program

Erase a Disc Program

Disc Title ........................................................ 31

Disc Title Input (TITLE IN)

Selecting Discs by Disc Title List (TITLE LIST)

Displaying Disc Title

Compression and DBE (COMP/DBE) ............ 33

COMP/DBE ON/OFF Switching

CD TEXT Function (for CD TEXT

compatible type) ...................................... 33

Title Display Switching

Title Scroll

Playing Discs on a 50-Disc Type

Multi-CD Player ...................................... 34

Audio Adjustment .................................... 35

Entering the Audio Menu ................................ 35

Audio Menu Functions .................................... 35

Balance Adjustment (FADER)

Subwoofer Output (SUB.W)

Subwoofer Setting Adjustment (80Hz)

Loudness Adjustment (LOUD)

Source Level Adjustment (SLA)

Using the Digital Signal

Processor (DSP) ................................ 38

Entering the DSP Menu .................................. 38

DSP Menu Functions ...................................... 38

Graphic Equalizer

Recalling the Equalizer Curves

13-Band Graphic Equalizer Adjustment

Position Selector .............................................. 40

About the Position Indicator

Setting the Listening Position (POSITION)

Auto-equalizing Function ................................ 41

Before Operating the Auto-equalization

Auto-equalizing

Error Cords of Auto-equalizing Function

Initial Setting ............................................ 45

Entering the Initial Setting Menu .................... 45

Initial Setting Menu Functions ........................ 46

Setting the Time

Setting the Calender

Setting the Clock Display (CLOCK)

Switching the AUX Mode (AUX)

Setting the Dimmer (DIMMER)

Selecting the Digital Attenuator (DIG.ATT)

Selecting the Contrast (CONTRAST)

Other Functions ........................................ 49

Volume Attenuator .......................................... 49

Switching the Display .................................... 49

About the Demonstration Mode ...................... 49

Using the AUX Source .................................... 50

Selecting the AUX Source

AUX Title Input

Cellular Telephone Muting ............................ 50

CD Player and Care .................................. 51

Precaution ........................................................ 51

Built-in CD Player’s Error Message .............. 51

Cassette Player and Care ...................... 52

Precaution ........................................................ 52

About the Cassette Player

About Cassette Tapes

Cleaning the Head .......................................... 52

Specifications .......................................... 53

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your

musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of

sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without distor-

tion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,

we want you listening for a lifetime.

W e Want You Listening ForALifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid pro longed exposure to excessive noise. This list of sound levels is included for your protection.

Decibel Level Example

30 Quiet library, soft whispers 40 Living room, refrigerator, bedroom away from traffic 50 Light traffic, normal conversation, quiet office 60 Air conditioner at 20 feet, sewing machine 70 Vacuum cleaner, hair dryer, noisy restaurant 80 Average city traffic, garbage disposals, alarm clock at two feet.

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE

90 Subway, motorcycle, truck traffic, lawn mower 100 Garbage truck, chain saw, pneumatic drill 120 Rock band concert in front of speakers, thunderclap 140 Gunshot blast, jet plane 180 Rocket launching pad

Information courtesy of the Deafness Research Foundation.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Key Finder

Head Unit (Close)

Head Unit (Open)

Operate buttons 1 to 6 after opening the front panel. Refer to page 10 for details on how to open the front panel.

Cassette loading slot

Buttons 1to 3

Buttons 4to 6

ANGLE buttons

LOUDNESS button

CD EJECT button

Disc loading slot

AUDIO button

5/∞/2/3 buttons

FUNCTION button

SOURCE button

BAND button

DSP button

SCROLL button

VOLUME

ATTENUATOR button

TAPEEJECT button

DISPLAY button

Key Finder

Remote Controller

A remote controller that enables remote operation of the head unit is supplied. Operation is the same as when using buttons on the head unit.

ATT button This lets you quickly lower volume level (by about90%). Press once more to return to the original volumelevel.

FUNCTION button

CD button Press once to select a CD.

BAND button

VOLUME button

5/∞ buttons

2/3 buttons

AUDIO button

DSP button

Cassette button Press once to select a cassette.

TUNER button Press once to select a tuner.

Remote Controller and Care

Using the Remote Controller

This product is equipped with a remote controller for convenient operation.

• Point the remote controller in the direction of the front panel to operate.

• When the remote controller is not in use, attach it firmly to the provided Mounting base.

Precaution:

• Do not store the remote controller in high temperatures or direct sunlight.

• The remote controller may not function properly in direct sunlight.

• Do not let the remote controller fall onto the floor, where it may become jammed under the brake or accelerator pedal.

• If you press the FUNCTION button on the remote controller while pressing the BAND button on it, the remote controller will not function properly. To cancel this setting, press the AUDIO button on the remote controller while pressing the BAND button on it to return to the previous setting.

Batteries

• Remove the cover on the back of the remote controller and insert the batteries with the (+) and (–) poles pointing in the proper direction.

Precaution:

• Use only AAA or IEC R03 1.5 V batteries.

• Remove the batteries if the remote controller is not used for a month or longer.

• Do not attempt to recharge the supplied batteries.

• Do not mix new and used batteries.

• If the event of battery leakage, wipe the remote controller completely clean and install new batter-

ies.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Before Using This Product

About This Product

The tuner frequencies on this product are allocated for use in North America. Use in other areas may result in improper reception.

About This Manual

This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the “Precaution” on page 8 and in other sections. This manual explains head unit operation. You can perform the same operations with the remote controller. The remote controller enables one-touch source changing, a function not provided on the head unit.

About Display Indications

This product’s display indications differ depending on whether the front panel is open or closed.

In this manual, all display indication examples are when the front panel is open.

Important

The serial number of this device is located on the bottom of this product. For your own security and convenience, be sure to record this number on the enclosed warranty card.

Resetting the Microprocessor

The microprocessor must be reset under the following conditions: When using this product for the first time after installation. When the product fails to operate properly. When strange (incorrect) messages appear on the display.

• To reset the microprocessor, press the RESET button on the head unit with a pen tip or other pointed instrument.

Precaution

• Keep this manual handy as a reference for operating procedures and precautions.

• Always keep the volume low enough for outside sounds to be audible.

• Protect the product from moisture.

• If the battery is disconnected, the preset memory will be erased and must be reprogrammed.

After-sales Service for Pioneer Products

Please contact the dealer or distributor from where you purchased the product for its aftersales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below:

Please do not ship your product to the companies at the addresses listed below for repair without advance contact.

For warranty information please see the Limited Warranty sheet included with your product.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

7 U.S.A.

Pioneer Electronics Service, Inc. CUSTOMER SERVICE DEPARTMENT P.O. Box 1760 Long Beach, CA 90801 800-421-1404

7 CANADA

Pioneer Electronics of Canada, Inc. CUSTOMER SERVICE DEPARTMENT 300 Allstate Parkway, Markham, Ontario L3R 0P2 (905) 479-4411 1-877-283-5901

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFOR-

MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS

PRODUCT WILL INCREASE EYE HAZARD.

Basic Operation

To Listen to Music

The following explains the initial operations required before you can listen to music.

Note:

• Loading a disc in this product. (Refer to page 12.)

• Loading a cassette tape in this product. (Refer to page 13.)

1. Select the desired source (e.g. Tuner).

7 Head Unit

Each press of the SOURCE button selects the desired source in the following order: Built-in CD player = Tuner = Cassette player = Multi-CD player = External Unit = AUX

7 Remote Controller

Each press of the button selects the desired source in the following order: CD button : Built-in CD player = Multi-CD player = Sources OFF Cassette button: Cassette player = AUX = Sources OFF TUNER button: Tuner = Sources OFF

Note:

• External Unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. Only one External Unit can be controlled by this product.

• In the following cases, the sound source will not change: * When this product corresponding to each source is not connected to this product. * No disc is set in this product. * No tape is set in this product. * No magazine is set in the Multi-CD player. * AUX (external input) is set to OFF. (Refer to page 47.)

• When this product’s blue lead is connected to the car’s Auto-antenna relay control terminal, the car’s Auto-antenna extends when this product’s source is selected the tuner. To retract the antenna, switch the sources other than tuner.

Each press changes the Source ...

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

2. Raise or lower the volume.

Note:

• Roll clockwise if you raise the volume level.

• Roll counterclockwise if you lower the volume level.

3. Turn the source OFF.

Setting the Display Angle

You can adjust front panel angle for easier operation. Operate buttons 1 to 6 after opening the front panel.

• Select the desired angle.

WARNING:

• Do not use with the front panel left open. If you do leave it open, it may result in injury in the event of an accident.

• Be careful not to catch your finger in the front panel when it is opening or closing.

Each press changes the angle.

Hold for 1 second

Rolling the VOLUME changes the volume level.

Basic Operation

Basic Operation of Tuner

Manual and Seek Tuning

• You can select the tuning method by changing the length of time you press the 2/3 button.

Manual Tuning (step by step) 0.5 seconds or less Seek Tuning 0.5 seconds or more

Note:

• If you continue pressing the button for longer than 0.5 seconds, you can skip broadcasting sta-

tions. Seek Tuning starts as soon as you release the button.

• Stereo indicator “” lights when a stereo station is selected.

Preset Tuning

• You can memorize broadcast stations in buttons 1 through 6 for easy, one-touch station recall.

Preset station recall 2 seconds or less Broadcast station preset memory 2 seconds or more

Note:

• Up to 18 FM stations (6 in F1 (FM1), F2 (FM2) and F3

(FM3)) and 6 AM stations can be stored in memory.

• You can also use the 5 or ∞ buttons to recall broadcast

stations memorized in buttons 1 through 6.

Frequency IndicatorBand Indicator

Band

F1 (FM1) = F2 (FM2) = F3 (FM3) = AM

Preset Number Indicator

Basic Operation of Built-in CD Player

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast forward/Reverse by pressing the 2/3 button for a different length of time.

Track Search 0.5 seconds or less Fast forward/Reverse Continue pressing

Note:

• If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Push the

CD EJECT button and check the disc for damage before reinserting it.

• If a CD is inserted with the recorded side up, it will be ejected automatically after a few moments.

• If the Built-in CD player cannot operate properly, an error message (such as “ERROR-14”)

appears on the display. Refer to “Built-in CD Player’s Error Message” on page 51.

Disc Loading Slot

The Built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing 8 cm CD.

Eject

Note:

• The CD function can be turned ON/OFF with the disc remaining in this product. (Refer to page 9.)

• A disc left partially inserted after ejection may incur damage or fall out.

Play Time Indicator

Track Number Indicator

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Basic Operation

Basic Operation of Cassette Player

Note:

• Be sure to close the front panel after loading or ejecting a cassette.

Direction Indicator

Open/Eject

Press the TAPE EJECT button, and the front panel opens, then the tape is ejected. When a cassette tape is not inserted, by pressing the TAPE EJECT button, you can open or close the front panel alternately.

Note:

• The Tape function can be turned ON/OFF with the cassette tape remaining in this product. (Refer to page 9.)

Direction Change

Play Time Indicator

Note:

• The continuous playback time count starts at “00'00''” at the following times. * When a tape is inserted. * When the tape direction is changed. * When you rewind the tape side currently playing back to the beginning.

• The continuous playback time count is halted when fast-forwarding/rewinding and while the Music Search function is operating.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Fast Forward/Rewind and Music Search

• Each press of the 3 button selects Fast Forward or Forward-Music Search.

FF (Fast Forward) = F-MS (Forward-Music Search) = Normal Playback

• Each press of the 2 button selects Rewind-Music Search.

REW (Rewind) = R-MS (Rewind-Music Search) = Normal Playback

Note:

• Fast Forward/Rewind and Music Search can be canceled by pressing the BAND button.

Cassette Loading Slot

If a cassette tape is inserted, the front panel is closed automatically.

Note:

• Indicator “MTL” lights when a metal or chrome tape is inserted. Nothing is displayed for a normal tape.

WARNING:

• Do not use with the front panel left open. If you do leave it open, it may result in injury in the event of an accident.

Basic Operation

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast Forward/Reverse by pressing the 2/3 button for a different length of time.

Track Search 0.5 seconds or less Fast forward/Reverse Continue pressing

Play Time Indicator

Disc Search

Disc Number Indicator Track Number Indicator

Basic Operation of Multi-CD Player

This product can control a Multi-CD player (sold separately).

Disc Number Search (for 6-Disc, 12-Disc types)

• You can select discs directly with the 1 to 6 buttons. Just press the number corresponding to the disc you want to listen to.

Note:

• When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6

buttons for 2 seconds or longer.

Note:

• The Multi-CD player may perform a preparatory operation, such as verifying the presence of a disc

or reading disc information, when the power is turned ON or a new disc is selected for playback. “READY” is displayed.

• If the Multi-CD player cannot operate properly, an error message such as “ERROR-14” is dis-

played. Refer to the Multi-CD player owner’s manual.

• If there are no discs in the Multi-CD player magazine, “NO DISC” is displayed.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Corresponding Display Indications and Buttons

This product’s display features Key Guidance Indicators. These light to indicate which of the 5/∞/2/3, FUNCTION, AUDIO and DSP buttons you can use. When you’re in the Function Menu (refer to next section), Detailed Setting Menu (refer to page 19), Initial Setting Menu (refer to page 45), Audio Menu (refer to page 35) or DSP Menu (refer to page 38), they also make it easy to see which 5/∞/2/3 buttons you can use to switch functions ON/OFF, switch repeat selections and perform other operations. Indicator and corresponding buttons are shown below.

7 Head Unit 7 Remote Controller 7 Display

When 1 is lit in the display, perform appropriate operations with the z buttons. When 2 is lit in the display, it indicates that you are in the Function Menu, Detailed Setting Menu or Initial Setting Menu. You can switch between each of these menus and between different modes in the menus using button x on the head unit or remote controller. When 3 is lit in the display, it indicates you are in the Audio Menu. You can switch between modes in the Audio Menu using button c on the head unit or remote controller. When 4 is lit in the display, it indicates you are in the DSP Menu. You can switch between modes in the DSP Menu using button v on the head unit or remote controller.

Note:

• The Key Guidance Indicators are displayed only when the front panel is open. In this manual, all display indication examples are when the front panel is open.

123

x c

Entering the Function Menu

The Function Menu lets you operate simple functions for each source.

Note:

• After entering the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled.

1. Select the desired mode in the Function Menu. (Refer to next section “Function Menu Functions”.)

2. Operate a mode. (e.g. Repeat Play)

The button used and the operation it performs are indicated by the key guidance indicator. Press the 5 button to switch the key guidance indicator ON, and the ∞ button to switch it OFF.

3. Cancel the Function Menu.

Function Menu Functions

The following chart shows functions for each source in the Function Menu. The chart also shows indications for each function, operations and buttons used to perform operations. For more details, or when you want to know about an operation, refer to the page number indicated in the chart.

7 Tuner

Function name (Display) Button: Operation Page

Best Stations Memory (BSM) 5:ON 21

∞:OFF

Local Seek Tuning (LOCAL) 1 5:ON 21

3 ∞:OFF

2 2 or 3:Select (Sensitivity)

Each press changes the Mode ...

Basic Operation

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

7 Built-in CD Player

Function name (Display) Button: Operation Page

Repeat Play (REPEAT) 5:ON 22

∞:OFF

Random Play (RANDOM) 5:ON 22

∞:OFF

Scan Play (T.SCAN) 5:ON 23

∞:OFF

Pause (PAUSE) 5:ON 23

∞:OFF

Compression and DBE (COMP/DBE) 5 or ∞:Select 24

(Sound Quality Function)

7 Cassette Player

Function name (Display) Button : Operation Page

Repeat Play (REPEAT) 5:ON 25

∞:OFF

Scan Play (SCAN) 5:ON 25

∞:OFF

Blank Skip (B.SKIP) 5:ON 25

∞:OFF

Radio Intercept (RI) 3:ON 26

2:OFF

Dolby B NR (B NR) 3:ON 26

2:OFF

7 Multi-CD Player

Function name (Display) Button: Operation Page

Repeat Play (REPEAT) 2 or 3:Select (Play range) 27 Selecting Discs by 1 2 or 3:Select (Disc Title) 32

Disc Title List (TITLE LIST) 2 5:Play Random Play (RANDOM) 5:ON 27

∞:OFF

Scan Play (SCAN) 5:ON 28

∞:OFF

ITS Play (ITS.PLAY) 5:ON 29

∞:OFF

Pause (PAUSE) 5:ON 28

∞:OFF

Compression and DBE (COMP/DBE) 5 or ∞:Select 33

(Sound Quality Function)

Basic Operation

Entering the Detailed Setting Menu

In the Detailed Setting Menu, you can operate convenient, complex functions for each source.

1. Enter the Detailed Setting Menu.

2. Select the desired mode. (Refer to next section “Detailed Setting Menu Functions”.)

3. Operate a mode.

4. Cancel the Detailed Setting Menu.

Note:

• You can cancel the Detailed Setting Menu by pressing the FUNCTION button again for 2 seconds

or more.

Each press changes the Mode ...

Hold for 2 seconds

Detailed Setting Menu Functions

The following chart shows functions for each source in the Detailed Setting Menu. The chart also shows indications for each function, operations and buttons used to perform operations. For more details, or when you want to know about an operation, refer to the page number indicated in the chart.

7 Built-in CD Player

Function name (Display) Button: Operation Page

Disc Title Input (TITLE IN) 1 5 or ∞:Select (Letter) 24

2 2 or 3:Select (Position) 3 3:Memory

7 Multi-CD Player

Function name (Display) Button: Operation Page

Disc Title Input (TITLE IN) 1 5 or ∞:Select (Letter) 31

2 2 or 3:Select (Position) 3 3:Memory

ITS Programming (ITS) 5:Memory 29

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Tuner Operation

Local Seek Tuning (LOCAL)

When Local mode is ON, you can only select broadcast stations providing strong reception.

1. Press the FUNCTION button and select the Local mode (LOCAL) in the Function Menu.

FM : LOCAL 1 Ô LOCAL 2 Ô LOCAL 3 Ô LOCAL 4 AM : LOCAL 1 Ô LOCAL 2

Note:

• The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you

receive progressively weaker stations.

Best Stations Memory (BSM)

The BSM (Best Stations Memory) function stores stations in memory automatically.

1. Press the FUNCTION button and select the BSM mode (BSM) in the Function Menu.

• To cancel the process, press the ∞ button in the Function Menu before memorization is complete.

2. Switch the BSM ON with the 5 button.

The stations with the strongest signals will be stored under buttons 1 to 6 and in order of their signal strength.

3. Select the desired Local Seek sensitivity with the 2/3 buttons.

“LOC”

2. Switch the Local ON/OFF with the 5/∞ buttons.

Using the Built-in CD Player

Repeat Play (REPEAT)

Repeat Play plays the same track repeatedly.

1. Press the FUNCTION button and select the Repeat mode (REPEAT) in the Function Menu.

Note:

• If you perform Track Search or Fast forward/Reverse, Repeat Play is automatically canceled.

Random Play (RANDOM)

Random Play plays the tracks on a CD in random order for variety.

1. Press the FUNCTION button and select the Random mode (RANDOM) in the Function Menu.

“RDM”

2. Switch Random Play ON/OFF with the 5/∞ buttons.

“RPT”

2. Switch Repeat Play ON/OFF with the 5/∞ buttons.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Using the Built-in CD Player

Scan Play (T.SCAN)

Scan Play plays the first 10 seconds or so of each track on a CD in succession.

1. Press the FUNCTION button and select the Scan mode (T.SCAN) in the Function Menu.

Note:

• Scan Play is canceled automatically after all the tracks on a disc have been scanned.

Pause (PAUSE)

Pause pauses the currently playing track.

1. Press the FUNCTION button and select the Pause mode (PAUSE) in the Function Menu.

2. Switch the Pause ON/OFF with the 5/∞ buttons.

3. When you find the desired track, cancel scan play with the ∞ button.

If the Function Menu is automatically canceled at this time, select the Scan mode in the Function Menu once more.

“SCAN”

2. Switch the Scan Play ON with the 5 button.

Compression and DBE (COMP/DBE)

Using the COMP (Compression) and DBE (Dynamic Bass Emphasis) functions enables Built-in CD player sound quality adjustment. Each of the functions enables two-step adjustment.

1. Press the FUNCTION button and select the COMP/DBE Switching mode (COMP/DBE) in the Function Menu.

Disc Title Input (TITLE IN)

You can input up to 48 disc titles for CDs in the Built-in CD player. (Refer to “Disc Title Input” on page 31 under “Using Multi-CD Players”.)

Note:

• After the title for 48 discs have been entered, data for a new disc will overwrite the oldest one.

• If you connect a Multi-CD player, you can input disc titles for up to 100 discs.

• When playing a CD TEXT disc on this product, you cannot switch to this mode.

• A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and

Track Title.

Displaying Disc Title

You can display the currently playing Disc Title. (Refer to “Displaying Disc Title” on page 32 under “Using Multi-CD Players”.)

CD TEXT Function

You can use these functions when playing a CD TEXT disc on the Built-in CD player. (Refer to “CD TEXT Function” on page 33 under “Using Multi-CD Players”.)

“CMP”

2. Select the desired mode with the 5/∞ buttons.

COMP OFF = COMP 1 = COMP 2 = COMP OFF = DBE 1 = DBE 2

7 DBE

DBE (Dynamic Bass Emphasis) boosts bass levels to give a fuller sound.

7 COMP

The COMP (Compression) function adjusts imbalances between loud and subdued sounds at higher volumes.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Using the Cassette Player

Repeat Play (REPEAT)

The repeat mode lets you hear the same song over again.

Scan Play (SCAN)

This function plays approximately the first 10 seconds of each song in succession. This is useful for finding a particular song you want to hear.

Blank Skip (B.SKIP)

This function fast-forwards to the next song automatically if there is a long period of silence (12 seconds or longer) between songs.

“B.SKIP”

2. Switch the Blank Skip ON/OFF with the 5/∞ buttons.

1. Press the FUNCTION button and select the Blank Skip mode (B.SKIP) in the Function Menu.

3. When you hear the song you are looking for, cancel the Scan Play with the ∞ button.

If the Function Menu is automatically canceled at this time, select the Scan mode in the Function Menu once more.

“SCAN”

2. Switch the Scan Play ON with the 5 button.

1. Press the FUNCTION button and select the Scan mode (SCAN) in the Function Menu.

“RPT”

2. Switch the Repeat Play ON/OFF with the 5/∞ buttons.

1. Press the FUNCTION button and select the Repeat mode (REPEAT) in the Function Menu.

Radio Intercept (RI)

This function allows you to listen to the radio during tape fast-forwarding/rewinding.

Note:

• The radio intercept function does not work during a Music Search operation.

Dolby B NR (B NR)

Switch to the Dolby B NR on when listening to a cassette recorded with Dolby B NR.

Note:

• Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

“∂B”

2. Switch the Dolby B NR ON/OFF with the 2/3 buttons.

1. Press the FUNCTION button and select the Dolby B NR mode (B NR) in the Function Menu.

“RI”

2. Switch the Radio Intercept ON/OFF with the 2/3 buttons.

1. Press the FUNCTION button and select the Radio Intercept switching mode (RI) in the Function Menu.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Using Multi-CD Players

Repeat Play (REPEAT)

There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD player Repeat. Default repeat play range is Multi-CD player Repeat.

Note:

• If you select other discs during the repeat play, the repeat play range changes to Multi-CD player Repeat.

• If you perform Track Search or Fast Forward/Reverse during One-track Repeat, the repeat play range changes to Disc Repeat.

Random Play (RANDOM)

Tracks are played at random within the selected repeat play range as explained in “Repeat Play” above.

Note:

• One-track Repeat changes to the Disc Repeat when you switch the Random Play ON.

“RDM”

2. Switch the Random Play ON/OFF with the 5/∞

buttons.

After selecting the desired repeat play range from those referred to in “Repeat Play” above, switch MultiCD Player Random Play ON.

1. Press the FUNCTION button and select the Random mode (RANDOM) in the Function Menu.

2 Select the desired repeat play

range with the 2/3 buttons.

Multi-CD player Repeat (“MCD” is displayed) = One-track Repeat (“TRK” is displayed and “RPT” indicator lights) = Disc Repeat (“DSC” is displayed and “DISC” indicator lights)

1. Press the FUNCTION button and select the Repeat Selecting mode (REPEAT) in the Function Menu.

Scan Play (SCAN)

In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10 seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is scanned for about 10 seconds.

Display Play range

T.SCAN Disc Repeat D.SCAN Multi-CD player Repeat

Note:

• Scan Play is canceled automatically after all the tracks or discs have been scanned.

• One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON.

Pause (PAUSE)

Pause pauses the currently playing track.

2. Switch the Pause ON/OFF with the 5/∞ buttons.

1. Press the FUNCTION button and select the Pause mode (PAUSE) in the Function Menu.

3. When you find the desired track (or disc), cancel the Scan Play with the ∞ button.

If the Function Menu is automatically canceled at this time, select the Scan mode in the Function Menu once more.

“SCAN”

2. Switch the Scan Play ON with the 5 button.

After selecting the desired repeat play range from those referred to in “Repeat Play” on page 27, switch Multi-CD Player Scan Play ON.

1. Press the FUNCTION button and select the Scan mode (SCAN) in the Function Menu.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Using Multi-CD Players

ITS (Instant Track Selection)

The ITS function allows you to search for the track you wish to play when a Multi-CD player is installed. You can use ITS to program automatic playback of up to 24 tracks per disc from up to 100 discs. (You can store ITS program and Disc Title data for up to 100 discs in memory.)

ITS Programming (ITS)

Programmed tracks are played within the selected repeat play range in the “Repeat Play” on page 27.

Note:

• After 100 discs have been programmed, data for a new disc will overwrite the data for the disc that has not been played back for the longest time.

ITS Play (ITS.PLAY)

ITS play of tracks is performed within the play range explained in the “Repeat Play” section.

Note:

• If no track in the current range is programmed for ITS play, “ITS EMPTY” is displayed.

2. Switch the ITS play ON/OFF with the 5/∞ buttons.

After selecting the desired repeat play range from those referred to in “Repeat Play”on page 27, switch ITS play ON.

1. Press the FUNCTION button and select the ITS Play mode (ITS.PLAY) in the Function Menu.

3. Program the desired track with the 5 button.

2. Select the ITS Programming mode (ITS) in the Detailed Setting Menu. (Refer to page 19.)

1. Play the track you wish to program.

+ 82 hidden pages