Pioneer DJM-1000 Operating Instruction

DJ MIXER MESA DE MEZCLAS DJ

DJM-1000

Operating Instructions Manual de instrucciones

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same. K015 En

WARNING

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal. The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation).

CAUTION

The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

When using this product follow the instructions written on the underside of the unit, which concern rated voltage, etc.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power

D8-10-2_En

D3-4-2-2-1a_A_En

cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.

Voltage selector

You can find the voltage selector switch on the rear panel of the unit.

The factory setting for the voltage selector is 220 – 240 V. Please set it to the correct voltage for your country or region.

• Saudi Arabia operates on 127 V and 220 V mains voltage. Please set to the correct voltage before using.

• For Taiwan, please set to 220 – 240 V before using.

• For Mexico, please set to 220 – 240 V before using.

Before changing the voltage, disconnect the AC power cord. Use a medium size screwdriver to change the voltage selector switch.

D3-4-2-2-2a_A_En

D3-4-2-2-4_En

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

D3-4-2-1-1_En-A

D8-10-1-2_En

D8-10-3a_En

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

WARNING

Before plugging in for the first time, read the following

section carefully.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230V or 120V) written on the rear panel.

WARNING

To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 5 cm at rear, and 3 cm at each side).

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.

Operating Environment

Operating environment temperature and humidity: +5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)

S002_En

VOLTAGE

SELECTOR

D3-4-2-1-3_A_En

D3-4-2-1-4_A_En

D3-4-2-1-7a_A_En

D3-4-2-1-7b_A_En

D3-4-2-1-7c_A_En

D3-4-2-1-5_En

<DRB1373> En

FEATURES CONTENTS

1 High sound quality design

Analog signals are transmitted via the shortest path and converted to digital signals by a 96 kHz sampling, 24 bit, high-quality A/D converter, thus passing the signals to the digital mixing stage under optimum conditions. Through the use of a 32 bit DSP, mixing is achieved with zero sound quality degradation, and together with simultaneous ideal filtering, optimum sound is produced for professional DJs working in clubs. To get the most from these features, a great deal of care has been paid to perfecting the sound quality, including a high-rigidity chassis to cut down unnecessary vibrations that might affect the sound, together with a high-performance power section using an R-core transformer that supports bass quality, thus creating clear and powerful sound ideal for club performances.

2 3 band isolator

Built-in 3-band isolator capable of producing level control +6 dB to –∞ on each bandwidth. The sharp operation feel allows the realization of a wide variety of DJ performances.

3 2-system, 3-type SEND/RETURN

A 2-system, 3-type SEND/RETURN (PRE INSERT/POST INSERT/ AUX) is provided to allow multiple connection variations with other external devices, such as effectors and samplers, thus widening the range of DJ play potential.

4 Fader curve adjust

The fader curve adjust allows adjustment not only the cross fader curve (as on former models), but also of channel fader curve. Both faders’ functions can be adjusted within 17 steps, so that DJs can customize the settings to their own preferred settings.

FEATURES ................................................................... 3

CONFIRM ACCESSORIES ........................................... 3

CAUTIONS REGARDING HANDLING ........................ 4

BEFORE USING

CONNECTIONS............................................................ 5

CONNECTION PANEL ........................................... 5

POWER CORD CONNECTION ............................... 6

CONNECTING TO THE INPUT CONNECTORS ... 6 CONNECTING TO THE EFFECTOR AND

OUTPUT CONNECTORS ....................................... 7

MIDI CONNECTORS .............................................. 7

CONNECTING MICROPHONES, HEADPHONES ... 8

DIGITAL LINK CONNECTIONS ............................. 8

PART NAMES AND FUNCTIONS ............................... 9

OPERATIONS

OPERATIONS ............................................................. 13

BASIC OPERATIONS ........................................... 13

FADER CURVE ADJUSTMENTS......................... 13

FADER START FUNCTION .................................. 14

USING EXTERNAL EFFECTORS ......................... 14

DIGITAL LINK FUNCTION ................................... 15

OTHER

TROUBLESHOOTING ................................................ 16

SPECIFICATIONS ....................................................... 17

BLOCK DIAGRAM ...................................................... 52

English

5 Digital IN/OUT

Using digital input connectors provided for each of the sampling rates (44.1/48/96 kHz), a system can be built in which no sound quality degradation occurs when connecting to external digital devices. A DIGITAL OUT connector with 24 bit/96 kHz sampling rate is provided, facilitating recording at studios and other situations demanding high sound quality. Supports only linear PCM.

6 MIDI OUT

MIDI signals can be output to allow MIDI control of external devices.

7 Digital link function

Multiple functions can be performed by using digital link cables to connect other PIONEER DJ CD players, DJ effectors and AV mixers.

8 Other features

÷ By using a control cable to connect the unit to a PIONEER DJ-

use CD player, playback can be started on the CD player in automatic linkage to operation of the fader (“fader start play”).

÷ Built-in “3-band equalizer” enabling level control within range

+6 dB to –26 dB at each bandwidth.

÷ Features “2-band booth EQ” for control of booth monitor

response, thus facilitating booth monitoring by the DJ.

÷ Built-in “cross fader assign” function, enabling more flexible

assigning of each channel’s input to the cross fader.

÷ Built-in “TALK OVER function” automatically lowers track

volume during MIC-input.

CONFIRM ACCESSORIES

Operating Instructions........................................................... 1

Power cord ............................................................................. 1

CAUTIONS REGARDING HANDLING

Location

Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.

÷ Do not install the unit in a location which is exposed to

direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components. Installation of the unit in a damp or dusty environment may also result in a malfunction or accident. (Avoid installation near cookers etc., where the unit may be exposed to oily smoke, steam or heat.)

÷ When the unit is used inside a carrying case or DJ booth,

separate it from the walls or other equipment to improve heat radiation.

Installing the DJM-1000 in an EIA rack

The screw holes on the front panel of the DJM-1000 are designed for use in attaching the unit to a 19-inch EIA rack. ÷ Attach the unit to the rack using screws of the appropriate

size (screws not provided with the unit).

÷ When installing the unit in a rack, take care to avoid

pinching your fingers.

Note

÷ Never place this unit directly above a power amplifier, as

the heat given off by the amplifier might result in damage to the unit. Placing the unit directly above a power amplifier might also result in ham radio signals being picked up or in other types of interference.

÷ Allow at least 1U (43.7 mm) space between this component

and the one mounted above it, so as to assure that the cords connected to this unit’s input/output connectors and terminals do not touch the component above.

÷ Always be sure to remove the unit from its rack before

shipping.

÷ When moving the unit while still installed in its rack,

exercise caution to avoid subjecting the unit to shocks or vibration.

Condensation

When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises sharply, condensation may form inside, and the unit may not be able to attain its full performance. In cases like this, allow the unit to stand for about an hour or raise the room temperature gradually.

Cleaning the Unit

÷ Use a polishing cloth to wipe off dust and dirt. ÷ When the surfaces are very dirty, wipe with a soft cloth

dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth. Do not use furniture wax or cleaners.

÷ Never use thinners, benzene, insecticide sprays or other

chemicals on or near this unit, since these will corrode the surfaces.

<DRB1373> En

CONNECTIONS

CONNECTION PANEL

BEFORE USING (CONNECTIONS)

1 2 3 4 5 6 7 8 9 10

COLD

MASTER ATT.

0dB

–3dB

GND

POWER

OFF

VOLTAGE

SELECTOR

AC IN

HOT

–6dB

–12dB

REC

MASTER 1

DIGITAL OUT

fs(Hz)

48k 96k

MASTER 2

BOOTH

(TRS)

CD / LINE CD / LINE CD / LINE CD / LINE CD / LINE CD / LINE

PHONO

SUBMIC SUBMIC

CONTROL DIGITAL

PHONO

CONTROL DIGITAL

PHONO

(MONO)

LINE

CONTROL DIGITAL

1. POWER switch

2. MASTER output connector 1 (MASTER 1)

XLR type balanced output (male connector).

3. MASTER output connector 2 (MASTER 2)

RCA type unbalanced output.

4. MASTER output attenuator dial (MASTER ATT.)

Attenuates the output level of MASTER 1 and MASTER 2 output. The level of attenuation can be chosen from 0 dB, –3 dB, –6 dB, –12 dB.

5. Recording output connectors (REC)

RCA type output connector for recording.

6. PHONO input connectors

RCA type phono level (for MM cartridge) input connectors. Do not use for input of line level signals.

7. Signal grounding terminal (SIGNAL GND)

Use to connect grounding wire from analog player. Not a terminal for safety grounding.

8. CD/LINE input connectors

RCA type line level input connectors. Use to connect DJ CD players and/or line level output devices.

9. SEND output connectors (SEND 1, 2)

Ø6.3 mm phone type output connectors. Use to connects input connectors from external effectors, etc. When only the L channel is connected, a monaural signal of L+R is output.

10. MIDI output connector (MIDI OUT)

DIN type output connector. Connects with other MIDI devices (P.7).

11. VISUAL link connector

When a digital link cable is used to connect the unit to a PIONEER video mixer (switcher) supporting digital-linkage, the video mixer’s cross fader can be controlled using the cross fader of the DJM-1000.

12. RETURN connectors (RETURN 1, 2)

Ø6.3 mm phone type output connectors. Connect to input connectors of external effectors, etc. When only the L channel is connected, the input in the L channel will be input into the R channel.

INPUTOUTPUT

SIGNAL GND.SIGNAL GND.

PHONO

(MONO)

LINE

CONTROL DIGITAL

PHONO

(MONO)

LINE

CONTROL SOUND 2

SIGNAL GND.

PHONO

(MONO)

LINE

CONTROL SOUND 1

2 SEND 1

2 RETURN 1

MIDI OUT

(MONO)

VISUAL

EFX 1EFX 2

111213141516171819202122

13. EFX link input/output connectors (EFX 1, 2)

When a digital-link cable is used to connect the unit to a PIONEER DJ effector supporting digital linkage (EFX-1000), SEND/RETURN connections are performed at once digitally, and functions such as fader effect are also enabled.

14. LINE input connectors

Ø6.3 mm phone type line level connectors. When only the L channel is connected, the input to the L channel will also be input into the R channel.

15. CDJ link input connectors (SOUND 1, 2)

When a digital-link cable is used to connect the unit to a PIONEER DJ CD player supporting digital linkage, the digital audio connections and control cable connections are performed at once, and functions such as BPM synchro are also enabled.

16. DIGITAL input connectors

RCA type digital coaxial input connectors. Connect to digital coaxial output connectors of DJ CD player, etc.

17. SUBMIC input connectors

Ø6.3 mm phone type microphone input connectors. Utilizes the DJM-1000’s channels 5 and 6 as microphone input channels.

18. CONTROL connectors

Ø3.5 mm mini phone-type input connector for connecting control cable to DJ CD player. Allows use of the DJM-1000’s fader function to control start/stop of a connected DJ CD player.

19. BOOTH monitor output connectors

Ø 6.3 mm phone type output connectors for booth monitor. Changes the volume with the BOOTH MONITOR dial (LEVEL), unaffected to the MASTER fader (since output is TRS, both balanced and unbalanced outputs are supported).

20. Digital output connector (DIGITAL OUT)

RCA type digital coaxial output connector. Digital master output.

21. Sampling frequency selector switch (48k/96k)

Chooses the sampling frequency of the digital output (96 kHz or 48 kHz).

22. Power inlet connector (AC IN)

Connect to AC outlet plug with the provided power cord.

23. VOLTAGE SELECTOR switch

Set to position of local electric voltage.

English

BEFORE USING (CONNECTIONS)

Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet.

POWER CORD CONNECTION

Connect the power cord last.

÷ When all other connections are completed, connect the supplied power cord to the AC inlet located on the rear panel of this unit, and

connect the power plug to an AC outlet or auxiliary power socket on an amplifier.

÷ Be sure to use only the supplied power cord.

CONNECTING TO THE INPUT CONNECTORS

PIONEER DJ CD players

Connect the DJ CD player’s audio output connectors to one of the sets of CD/LINE input connectors on the DJM-1000, and connect the control cable to the corresponding channel’s CONTROL connector. Switch the input selector switch of the connected channel to [CD/LINE]. When using digital connections, connect the digital coaxial output connector to one of the DIGITAL input connectors of the DJM1000, and switch the input selector switch of the connected channel to [DIGITAL] (no digital input connectors are provided for channel 1 and channel 2).

Analog turntables

Connect the audio output cables of the analog turntable to one set of PHONO input connectors on the DJM-1000, and switch the input selector switch of the connected channel to [PHONO]. The PHONO input of the DJM-1000 supports MM cartridges. The ground cable of an analog turntable is connected to one of the SIGNAL GND terminals.

DJ CD player DJ CD player

Other line level output devices

When connecting cassette decks or CD players, connect the audio output connectors to one of the CD/LINE input connectors of the DJM-1000, and switch the input selector switch of the connected channel to [CD/LINE]. When the connection plug is a Ø6.3 mm phone plug, connect to one of the LINE input connectors of the DJM-1000, and switch the input selector switch of the connected channel to [LINE] (no LINE input connectors are provided for channel 5 and channel 6). When only the L channel is connected, the input in the L channel will be input to the R channel as well.

Digital output devices

When using digital connections to devices such as CD players, connect the device’s digital coaxial output connector to one of the DIGITAL input connectors of the DJM-1000, and switch the input selector switch of the connected channel to [DIGITAL] (no DIGITAL input connectors are provided for channel 1 and channel 2).

Analog turntable Analog turntable

<DRB1373> En

POWER

OFF

VOLTAGE

SELECTOR

AC IN

L RLR LR LR

PHONO

(MONO)

LINE

CONTROL DIGITAL

L R

INPUTOUTPUT

SIGNAL GND.SIGNAL GND.

PHONO

(MONO)

LINE

CONTROL DIGITAL

PHONO

(MONO)

LINE

CONTROL SOUND 2

SIGNAL GND.

PHONO

(MONO)

LINE

CONTROL SOUND 1

2 SEND 1

2 RETURN 1

MIDI OUT

(MONO)

VISUAL

EFX 1EFX 2

COLD

MASTER ATT.

0dB

–3dB

GND

HOT

–6dB

–12dB

REC

MASTER 1

DIGITAL OUT

fs(Hz)

48k 96k

MASTER 2

BOOTH

(TRS)

CD / LINE CD / LINE CD / LINE CD / LINE CD / LINE CD / LINE

PHONO

SUBMIC SUBMIC

CONTROL DIGITAL

PHONO

CONTROL DIGITAL

CD player, etc. Cassette deck, etc.

+ 11 hidden pages