Pioneer DEH-X5800HD, DEH-X5810HD Owner's Manual

CD RDS RECEIVER AUTORADIO CD RDS REPRODUCTOR DE CD CON RECEPTOR RDS

DEH-X5800HD DEH-X5810HD

Owner’s Manual

Mode d’emploi

Manual de instrucciones

Important (Serial number)

The serial number is located on the bottom of th is unit. For your own se curity and convenience, be sure to record this number on the enclosed warranty card.

Important (Numéro de série)

Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie.

Importante (Número de serie)

El número de se rie se encuentra en la pa rte inferior de esta unidad. Por su propia seguri dad y comodidad, asegúrese de anotar este número en la tarjeta de garantía que se adjunta.

English Français Español

About this manual:

Table of Contents

Before You Start....................................................................................... 2

Getting Started........................................................................................ 3

HD Radio™ Technology .......................................................................... 5

CD/USB/iPod/AUX................................................................................... 6

App Mode................................................................................................. 8

Pandora®................................................................................................... 9

Using Pioneer ARC APP.......................................................................... 9

Settings................................................................................................... 10

FUNCTION settings .............................................................................. 10

AUDIO settings...................................................................................... 11

SYSTEM settings ................................................................................... 12

ILLUMINATION settings ....................................................................... 12

MIXTRAX settings................................................................................. 13

Connections/Installation..................................................................... 14

Additional Information........................................................................ 16

• In the following instructions, a USB memory or USB audio player are referred to as

“USB device”.

• In this manual, iPod and iPhone are referred to as “iPod”.

Before You Start

Thank you for purchasing this PIONEER product

To ensure proper use, please read through this manual before using this product. It is especially important that you read an d observe WARNI NGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful inter ference, and (2) this device must accept any inter ference received, including interference that may cause undesired operation.

Alteration or modifications carr ied out without ap propriate authoriza tion may invalidate the user’s right to operate the equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment in to an outlet on a circuit different from that to whic h the receiver is

connected.

–Consult the dealer or an experienced radio/TV technician for help.

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through cle arly without annoyin g blaring or disto rtion and, most im portantly, without a ffecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

• Once you have established a comfortable sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

• Do not turn up the volume so high that you can’t hear what’s around you.

• Use caution or temporarily discontinue use in potentially hazardous situations.

• Do not use headphones while operating a motorized vehicle; the use of headphones may create a

traffic haza rd and is illegal in many areas.

2En

English

WARNING

• Do not attempt to install or service this product by yourself. Installation or servicing of this

CAUTION

SRC (source)/OFF

Detach button

Display window

M.C. (multi-control) dial

BAND/

/DIMMER

DISP (display)

SRC (source)

VOLUME +/– MUTE

DISP (display)

FUNCTION

AUDIO

product by persons without training and experience in el ectronic equipment and automotive accessories may be dangerous a nd could expose you t o the risk of elec tric shock, in jury or other hazards.

• Do not attempt to operate the uni t while driving. Make sure to pull off the road and park your vehicle

in a safe location before attempting to use the controls on the device.

• This product contains chemicals known to the State of California and other governmental entities to

cause cancer and birth de fects or other reproductive harm. Wash hands after handling.

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS R ADIATION EXPOSURE. CAUTION: THE USE OF OPTIC AL INSTRUMENTS WITH THIS PRODUCT WIL L INCREASE EYE HAZARD.

• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result.

Also, damage to this unit, smoke, and overheating could result from contact with liquids.

• Always keep the volume low enough to hear outside sounds.

• This product is evaluated in moderate and tropical climate condition under the Audio, video and

similar electronic apparatus - Safety requirements, IEC 60065.

CAUTION

This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007.

After-sales service for Pioneer products

Please contact the dealer, distributor from where you purchased this unit or the authorized PIONEER Service Station for after-sales se rvice or any other information. In case the necessary i nformation is not available, please contact the companies listed below: Please do not ship your unit to the companies at the addresses listed below for repair without contacting them in advance.

U.S.A. and CANADA

Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404

For warranty information please see the Limited Warranty sheet included with this unit.

Getting Started

Basic operation

DEH-X5800HD/X5810HD

Remote Control

Frequently used operations

The available buttons vary depending on the unit.

3En

Purpose

Important

WAR NING

CAUTION

Detach Attach

How to replace the battery

Insert the CR2025 (3 V ) battery with the plus (+) and minus (–) poles orientated properly.

Turn on the power* Press SRC/OFF to turn on

Adjust the volume Turn the M.C. dial. Press VOLUME + or –.

Select a source Press SRC/OFF repeatedly. Press SRC repeatedly. Change the display

information Return to th e previous

display/list Return to the normal display

from the menu

* When this unit’s blue/wh ite lead is connected to the vehicl e’s auto-antenna relay control terminal,

the vehicle’s antenn a extends when this unit’s source is turned on. To retract the anten na, turn the source off.

Head Unit Remote Control

the power. Press and hold SRC/OFF to turn off the power.

Press DISP repeatedly. Press DISP repeatedly.

Press /DIMMER. Press / to select the

Press BAND/.

Operation

Press SRC to turn on the power. Press and hold SRC to turn off the power.

Press MUTE to mute the unit. Press again to unmute.

next/previous folder.

Display indication

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the button is pressed.

Appears when the local seek tuning function is set (page 11).

Appears when the sound retriever function is set (page 11).

Appears when random/shuffle play is set.

Appears when repeat play is set.

Appears when the iPod control function is set (page 8).

Detaching the front panel

Detach the front panel to prevent the ft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it.

• Avoid subjecting the front panel to excessive shock.

• Keep the front panel out of direct sunlight and high temperatures.

• Always store the detached front panel in a protective case or bag.

Preparing the remote control

–

Remove the insulation sheet before use.

• Do not ingest the battery, Chemical Burn Hazard.

• This product, including the supplied remote control, contains a coin/button cell battery. If the coin/

button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.

• Keep new or used batteries out of the reach of children. If the battery is swallowed or placed inside

any part of the bod y, consult a doctor imme diately.

• If the battery compartment does not c lose securely, stop using the product and keep it away from

children.

• Do not expose the battery or remote control to excessive heat such as direct sunlight or fire.

• There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the

battery, replace it with the same type.

4En

English

• Do not handle or store the battery with metallic tools or objects.

Important

NOTES

NOTE

• If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a

new batter y.

• When disposing of used batteries, please comply with governmental regulations or environmental

public instit utions’ rules that apply in you r country/area.

• “Perchlorate Mater ial - special handlin g may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”

• Do not store the remote control in high temperatures or direct sunlight.

• Do not let the remote control fall onto the floor, where it may become jammed under the brake or

accelerator pedal.

Setting the clock (CLOCK SET)

When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display.

1 Press the M.C. dial.

The setup menu disappears after 30 seconds of no operation. If you prefer not to set at this time, turn the M.C . dial to select [NO], then press to confirm.

2 Tur n the M.C. dial to adjust the hour, then press to confirm.

The indicator moves to the minute setting automatically.

3 Tur n the M.C. dial to adjust the minute, then press to confirm.

[QUIT] appears.

4 Tur n the M.C. dial to select [YES], then press to confirm.

2 Press the M.C. dial to display the main menu. 3 Tur n the M.C. dial to select [INITIAL], then press to confirm. 4 Tur n the M.C. dial to select an option, then press to confirm.

The options vary depending on the unit.

Menu Item Description SP-P/O MODE Select when there is a full-range speaker connected to the rear

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to

[REAR/REAR] Select when there are full-range speakers connected to the rear

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

[YES], [CANCEL]

speaker output leads and there is a subwoofer connected to the RCA output.

the rear speaker output leads and there is a subwoofer connected to the RCA output.

speaker output leads and RCA output. If there is a full-range speaker connected to the rear speaker output leads, and the RCA output is not used, you may select either [REAR/SUB.W] or [REAR/REAR].

restarted automatically. (Some of the settings may be retained even after resetting the unit.)

• You can cancel the menu setting by pressing SRC/OFF.

• This setting can be made at any time. See page 12 for more details.

Canceling the demonstration display (DEMO OFF)

1 Press the M.C. dial to display the main menu. 2 Tur n the M.C. dial to select [SYSTEM], then press to confirm. 3 Tur n the M.C. dial to select [DEMO OFF], then press to confirm. 4 Tur n the M.C. dial to select [YES], then press to confirm.

INITIAL settings

1 Press and hold SRC/OFF until the unit turns off.

HD Radio™ Technology

The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception.

About HD Radio™ stations

HD Radio™ stations offer high-quality audio and data services. HD Radio stations are brought to you by local FM/AM stations. HD Radio stations feature the following:

– High quality audio –FM multicasting – Data services

5En

Analog AM Digital AM

Analog FM Analog FM

Analog FM

Digital FM-1 ch Digital FM-2 ch Digital FM-3 ch

Digital FM

FM band

Analog AM

AM band

3 Tur n th e M.C. dial to select [BSM], then press to confirm.

NOTE

To seek a station manually

After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press / .

Depending on the reception status , seek tuning can be changed between digit al station seek and all station seek (page 11).

To store stations manually

While receiving the station you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing.

Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.

Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.

Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.

Receiving preset stations

1 Press SRC/OFF to select [RADIO]. 2 Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM]. 3 Press a number button (1/ to 6/).

Best stations memory (BSM)

The six strongest stations are stored on the number buttons (1/ to 6/).

1 After selecting the band, press the M.C. dial to display the main menu. 2 Turn th e M.C. dial to select [FUNCTION], then press to confirm.

6En

Alert history

1 While receiving an emergency announcement, press .

The last four items that have been received appear.

2 Tur n th e M.C. dial to select one of the items, then press to confirm.

The detail of the selected item appears.

[/TEST/] appears at the beginning of an item if it was a test message.

To delete an alert history

Press and hold the M.C. dial in step 2 above.

2 Tur n the M.C. dial to select [DELETE YES], then press to confirm.

CD/USB/iPod/AUX

Playing back

Disconnect headphones from the device before connecting it to the unit.

English

NOTE

CAUTION

NOTE

AUX input jack (3.5 mm stereo jack)

(eject)

Disc loading slot USB por t

SRC (source)/OFF

M.C. (multi-control) dial

NOTE

Insert a disc into the disc loading slot with the label side up.

To eject a disc, stop playback first then press .

USB devices (including Android™)/iPod

Open the USB port cover.

2 Plug in the USB device/iPod using an appropriate cable.

To automatically switch to [USB] source when a USB device/iPod is connected to the uni t, set [USB AUTO] to [ON] in the SYSTEM settings (page 12).

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 10.

MTP connection

A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device and the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is not compatible with WAV file formats, and cannot be used with the MIXTRAX function.

If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the SYSTEM settings (page 12).

AUX

Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

If [AUX] is set to [OFF] in the SYSTEM set tings, [AUX] cannot be selected as a source (page 12).

Operations

You can make various adjustments in the FUNCTION settings (page 10). Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.

Purpose Operation

Select a folder/album*1 Press 1/ or 2/. Select a track/song (chapter) Press or . Fast forward or reverse*3 Press and hold or . Search for a file from a list 1 Press to display the list.

View a list of the files in the selected folder/ category*1

Play a song in the selected folder/ category*1

Alphabetical search (iPod only) 1 Press to display the list.

Repeat play Press 6/. Random/shuffle play Press 5/. Shuffle all play (iPod only) Press and hold 5/.

2 Turn t he M.C. dial to select the desired

file (folder) name or category, then press to confirm.

3 Turn t he M.C. dial to select the desired

file, then press to confirm. Playback starts.

Press the M.C. dial when a folder/category is selected.

Press and hold the M.C. dial when a folder/ category is selected.

2 Turn t he M.C. dial to select the desired

category list, then press to enter the alphabetical search mode. (Turning the M.C. dial twice also enters the alphabetical search mode.)

3 Turn t he M.C. dial to select a letter, then

press to display the alphabetical list.

To cancel alphabetical search, press / DIMMER.

7En

NOTE

Purpose Operation

NOTES

Important

NOTE

Pause/resume playback Press 4/PAU SE . Sound retriever*1*2 Press 3/S.Rtrv.

Return to root folder (CD/USB only)*1 Press and hold BAND/. Switch between compressed audio and CD-

DA (CD o nly) Change drives in USB device

(Devices that support the USB mass storage device class protocol only)

*1 Compressed audio files only *2 This function is disabled when USB is selected as a source and the MIXTRAX function is on. *3 When you use the fast forward or reverse function while playing a VBR file, the playback time may

be not correct.

[1]: Effective for low compression rates [2]: Effective for high compression rates

Press BAND/.

Useful functions for iPod

Link play mode

You can access songs based on the artist, album, or genre currently playing.

1 While listening to a song, press and hold to enter the link play mode. 2 Tur n the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to

confir m.

The selected song/album will be played after the currently playing song.

The selected song/album may be canceled if you use functions other than those from the link play mode (e.g. fast forward and reverse).

iPod control

You can control the unit via a connected iPod. The following iPod models are not compatible with this function.

– iPod nano 1st generation, iPod with video

1 Press BAND/ during playback, then select the control mode.

[CONTROL iPod]: The unit’s iPod function can be operated from the connected iPod. [CONTROL AUDIO]: The unit’s iPod function can only be operated by the buttons on the unit or supplied remote control. In this mode, the connected iPod cannot be turned on or off.

• Switching the control mode to [CONTROL iPod] pauses song playback. Use the connected iPod to

resume playback.

• The following operations are still accessible from the unit, even if the control mode is set to

[CONTROL iPod]. – Pause, fast forward/reverse, song/chapter selection

• The volume can only be adjusted from the unit.

About MIXTRAX (USB/iPod only)

The MIXTRAX function creates a non-stop mix of your music library, accompanied by illumination effects. For details on MIXTRAX settings, see page 13.

• This function is not compatible with an Android device connected via MTP.

• When USB is selected as a source and the MIXTRAX function is in use, the sound retriever function is

disabled.

• Depending on the file/song, sound effects may not be available.

• Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.

1 Press MIX to turn MIXTRAX on/off.

App Mode

You can enjoy listening to an application on an iPhone via the unit. In some cases, you can control an application by using the unit. For details on compatible devices, visit our website.

Use of third part y apps may involve or require the provisio n of personally identifiable information , whether through the creation of a user account or otherwise, and for certain applications, the provision of geolocation data. ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT LIMITATION COLLECTION A ND SECURITY OF USER DATA AND PRIVACY PRAC TICES. BY ACCESSIN G THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT CONSENT TO THE USE OF GEO LOCATION DATA WHERE APPLICA BLE, DO NOT USE THAT THIRD PARTY APP.

For iPhone users

This function is compatible with iPhones and iPodtouches installed with iOS 5.0 or later.

PIONEER IS NOT LIABLE FOR ANY THIRD PART Y APPS OR CONTENT, INCLUDING WITHOUT LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER.

8En

English

Playback of an application via the unit

NOTE

1 Connect this unit with the mobile device.

• iPhone via USB (page 7)

2 Press SRC/OFF to select [APP]. 3 Operate the mobile device to start up the application.

Basic operations

You can make various adjustments in the FUNCTION settings (page 10).

Purpose Operation

Select a track Press or . Fast forward or reverse Press and hold or . Pause/resume playback Press BAND/.

Pandora®

Pandora internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com. The Pandora mobile application is available for iPhone. Please visit www.pandora.com/ everywhere/mobile for the latest compatibility information.

Listening to Pandora

Update the firmware of the Pandora application to the latest version before use.

1 Connect this unit with the mobile device.

• iPhone via USB (page 7)

2 Press SRC/OFF to select [PANDORA]. 3 Launch the Pandora application on the mobile device and start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 10).

Purpose Operation

Skip a track Press .

Purpose Operation

Switch between Shuffle and the station

Change the sort order Press (list), then select one of the following.

Play When Shuffle or the station is selected, press the

Delete a station 1 When the station is selected, press and hold the

Pause/resume playback Press 4/PAUSE. Sound retriever* Press 3/S.Rtrv.

Thumbs Up Press 1/. Thumbs Down Press 2/. Create a new station based on the

track currently being played Create a new station based on the

artist currently being played

* This function is disabled when the MIXTRAX function is on.

Some functi ons of Pandora may not be operated from the unit.

Press (list), then turn the M.C. dial to select the Shuffle or the desired station.

[ABC]: Sort the items in the list alphabetically. [DATE]: Sort the items in the list in order of the

dates on which the items were created.

M.C. dial.

[DELETE YES] appears.

2 Press the M.C. dial. To cancel, press /DIMMER in step 1.

[1]: Effective for low compression rates [2]: Effective for high compression rates

Press and hold 5/.

Press and hold 6/.

Using Pioneer ARC APP

You can operate the unit from Pioneer ARC APP installed on an iPhone/Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc., by using the unit. For details on what operations are available on the application, see the application’s help section.

9En

WAR NIN G

Do not attempt to op erate the application while dri ving. Make sure to pull off the road and park your

NOTE

vehicle in a safe location before attempting to use the controls on the application.

For iPhone users

This function is compatible with iPhones (iPhone 5 or later) and iPod touches installed with iOS 8.0 or later. You can download Pioneer ARC APP on iTunes App Store.

For Android device users

This function is compatible with devices that have Android OS 4.1 or later installed and also support AOA (Android Open Accessory) 2.0. You can download Pioneer ARC APP on Google Play™.

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design, regardless of the OS version.

Listening to music on Android

1 Press SRC/OFF to select [ANDROID].

Basic operations

Purpose Operation

Select a track Press or . Fast forward or reverse Press and hold or . Pause/resume playback Press 4/PAU SE . Sound retriever Press 3/S.Rtrv.

[1]: Effective for low compression rates [2]: Effective for high compression rates

Making a connection with Pioneer ARC APP

1 Connect this unit with the mobile device.

• iPhone/Android device via USB (page 7) Proceed to step 6 if you select the USB connection for iPhone.

2 Press the M.C. dial to display the main menu. 3 Turn th e M.C. dial to select [SYSTEM], then press to confirm. 4 Turn th e M.C. dial to select [ANDROID WIRED], then press to confirm. 5 Turn th e M.C. dial to select [APP CONTROL] for an Android device connected via

USB.

If [ON] is selected in [P.APP AUTO ON] (page 12), Pioneer ARC APP on the Android device starts automatically, and all the steps are finished.

If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you to install the application will appe ar on your Android device. Select [OFF] in [P.APP AUTO ON] to clear the message (page 12).

6 Press SRC/OFF to select any source. 7 Launch Pioneer ARC APP on the mobile device.

You can also launch the application by pressing and holding the M.C. dial for iPhone.

10En

Settings

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu. 2 Tur n th e M.C. dial to select one of the categories below, then press to confirm.

• FUNC TION settings (page 10)

• AUDIO settings (page 11)

• SYSTEM settings (page 12)

• ILLUMINATION settings (page 12)

• MIXTRAX settings (page 13)

3 Tur n th e M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.

Menu Item Description

BSM

Store the six strongest stations on the number buttons (1/ to 6/ ) automatically.

English

Menu Item Description

USB

iPod

LOCA L

FM: [OFF], [LV1], [LV2], [LV3], [LV4] AM: [OFF], [LV1], [LV2]

HD SEEK*

[ON], [OFF] Change seek tuning setting between digital

BLEND*

[ON], [OFF] Set [ON] to switch to the analog broadcast of the

ACTIVE RAD IO

[ON], [OFF] Interrupt the currently selected source with

S.RTRV

[1] (effective for low compression rates), [2] (effective for high compression rates), [OFF]

AUDIO BOOK

[FASTER], [NORMAL], [SLOWER] Change the playback speed. (Not available when

BOOKMARK

NEW STATION

[FROM TRACK], [FROM ARTIST] Create a new station based on the track or artist

Restrict the tuning station according to the signal strength.

station seek ([ON]) and all station seek ([OFF]) depending on the reception status.

same frequency level automatically if a digital broadcast reception is poor. Set [OFF] to receive analog broadcast only.

emergency announcements or test messages. A beep can be heard when an emergency announcement or test message breaks in. Select [OFF] to disable this function. (In some cases when a test message is received, a notification will appear in the display instead of a beep.)

Enhance compressed audio and restore rich sound. Not available when:

• USB is selected as a source and the MIXTRAX

function is set to on.

• CD-DA/CD-TEXT is played back.

[CONTROL iPod] is selected in the control mode.)

Store the track information currently being played in your Pandora account.

currently being played.

Menu Item Description

PAU SE

Pause or resume playback.

* If [HD SEEK] is set to [ON] and [BLEND] is set to [OFF], the tuner cannot receive broadcasts. In this

case, [HD SEEK] or [BLEND] is changed automatically as follows:

– When [HD SEEK] is set to [ON], if you switch [BLEND] from [ON] to [OFF], [HD SEEK] is changed to

[OFF].

– When [BLEND] is set to [OFF], if you switch [HD SEEK] from [OFF] to [ ON], [BLEND] is changed to

[ON].

AUDIO settings

Menu Item Description FAD ER *1

Adjust the front and rear speaker balance.

BALANCE

Adjust the left and right speaker balance.

EQ SETTING

[SUPER BASS], [POWERFUL], [NATURAL], [VOCAL], [CUSTOM1], [CUSTOM2], [FLAT]

Select an equalizer band and level for further customizing. Equalizer band: [80HZ], [250HZ], [800HZ], [2.5KHZ], [8KHZ]

Equalizer l evel: [+6] to [–6]

LOUDN ESS

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

SUB.W*2

[NOR], [REV], [OFF] Select the subwoofer phase.

SUB.W CTRL*2*3

Cut-off frequency: [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ]

Output level: [–24] to [+6] Slope level: [–12], [–24]

Select or customize the equalizer curve. [CUSTOM1] can be set separately for each source. However, each of the below combinations are set to the same setting automatically.

• USB, iPod, PANDORA (iPhone), ANDROID, and

APP (iPhone) [CUSTOM2] is a shared setting used for all sources.

Only frequencies lower than those in the selected range are output from the subwoofer.

11En

Menu Item Description BASS BOOST

[0] to [+6] Select the bass boost level.

HPF SETTING

Cut-off frequency: [OFF], [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ]

Slope level: [–12], [–24]

SLA

[+4] to [–4] Adjust the volume level for each source except

*1 Not avai lable when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5). *2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5). *3 Not available when [OFF] is selected in [SUB.W].

Only frequencies higher than the high-pass filter (HPF) cutoff are output from the speakers.

FM. Each of the below combinations are set to the same setting automatically.

• USB, iPod, PANDORA (iPhone), ANDROID, and

APP (i Phone)

SYSTEM settings

You can also access to these menus when the unit is turned off.

Menu Item Description CLOCK SET

Set the clock (page 5).

12H/24H

[12H], [24H] Select the time notation.

INFO DISPLAY

Display the item on the sub information display. Select from “SPEANA”, “LEVEL METER”, “SOURCE”, “CLOCK”, and “OFF”.

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

connected to the unit.

Menu Item Description USB AUTO

[ON], [OFF] Select [ON] to automatically switch to [USB]

ANDROID WIRED

[MEMORY], [A PP CONTROL] Select the appropriate conne ction method for an

P. AP P A U TO O N

[ON], [OFF]

source when a USB device/iPod is connected to the unit. Select [OFF] when a USB device/iPod is being connected to the unit just for charging.

Android device.

Select [ON] to automatically launch the car remote application when an Android device is connected to the unit via AOA. (Not available when [MEMORY] is selected in [ANDROID WIRED].)

ILLUMINATION settings

Menu Item Description COLOR

[KEY COLOR], [DISP COLOR], [BOTH COLOR]

DIM SETTING

[SYNC ILLUMI], [SYNC CLOCK], [MANUAL]

Select color for the keys/display of the unit from 12 preset colors, [SCAN] or [CUSTOM]*.

• [SCAN]: Cycle through a variety of colors

automatically.

• [CUSTOM]*: 1 Press and hold the M.C. dial until the color

setting display appears.

2 Set the primary color (R (red)/G (green)/B

(blue)) and brightness level ([0] to [60]). You cannot select a level below 10 for all three

of R (red), G (green), B (blue) at the same time. You can also customize the preset colors. Select one of the preset colors, then press and hold the M.C. dial until the color setting display appears.

* The CUSTOM setting is only available for [KEY

COLOR] and [DISP COLOR].

Change the display brightness.

12En

English

Menu Item Description BRIGHTNESS

[1] to [10] Change the display brightness.

ILLUMI FX

[ON], [OFF] The illumination effect can be seen when a CD is

The available setting ranges differ depending o n [DIM SETTING].

inserted/ejected. The illumination effect will activate when the ACC power is turned on/off regardless of this setting.

Menu Item Description CUT IN FX

[ON], [OFF] Turn the MI XTRAX sound effects on/off w hile

manually changing the tracks.

MIXTRAX settings

Menu Item Description SHORT PLAYBCK

[1.0 MIN], [1.5 MIN], [2.0 MIN], [2.5 MIN], [3.0 MIN], [OFF]

FLASH AREA

[KEY/DISPLAY], [KEY], [OFF] Select the area for the illumination effect.

FLASH PATTERN

[SOUND LEVEL 1] to [SOUND LEVEL 6]Change the illumination effect according to

[LOW PASS 1] to [LOW PASS 6] The flash pattern changes according to the

[RANDOM1] The flash pattern changes randomly a ccording

[RANDOM2] The flash pattern changes randomly a ccording

[RANDOM3] The flash pattern changes randomly a ccording

DISPLAY FX

[ON], [OFF] Set the MIXTRAX special effects on/off.

Select the length of the playback time.

When [OFF] is selected, the color set under the ILLUMINATION settings (page 12) is us ed as the display color.

the sound and bass level. The flash pattern changes according to the sound level.

bass level.

to the sound level mode and low pass mode.

to the sound level mode.

to the low pass mode.

13En

WARNIN G

Important

Connections/Installation

Ground wire POWER AMP

Other devices (Another electronic device in the car)

Metal parts o f car’s body

*1 Not supplied for this unit

ACC posi tion No ACC position

Important

Connections

• When speaker output is used by 4

channels, use speakers over 50 W (maximum input power) and between 4 Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit.

• When rear speaker output is used by 2 Ω

of subwoofer, use speakers over 70 W (maximum input power). * Please refer to connections for a connection method.

• The black cable is ground. When

installing this unit or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connec ted to metal parts of the car’s body. The ground wire of the power amp and the one of this unit or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire, generation of smoke or malfunction.

• When installing this unit in a vehicle

without an ACC (accessory) position on the ignition switch, failure to connect the

14En

red cable to the terminal that detects operation of the ignition key may result in battery drain.

• Use this unit with a 12-volt battery and

negative grounding only. Failure to do so may result in a fire or malfunction.

• To prevent a short-circuit, overheating or

malfunction, be sure to follow the directions below. – Disconnect the negative terminal of the

battery before installation.

– Secure the wiring with cable clamps or

adhesive tape. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring.

– Place all cables away from moving parts,

such as the shift lever and seat rails.

– Place all cables away from hot places,

such as near the heater outlet.

– Do not connect the yellow cable to the

battery by passing it through the hole to the engine compartment.

– Cover any disconnected cable

connectors with insulating tape. –Do not shorten any cables. – Never cut the insulation of the power

cable of this unit in order to share the

power with other devices. The current

capacity of the cable is limited. – Use a fuse of the rating prescribed. – Never wire the negative speaker cable

directly to ground. – Never band together negative cables of

multiple speakers.

• When this unit is on, control signals are

sent through the blue/white cable. Connect this cable to the system remote

control of an external power amp or the vehicle’s auto-antenna relay control terminal (max. 300mA 12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal.

• Never connect the blue/white cable to

the power terminal of an external power amp. Also, never connect it to the power terminal of the auto antenna. Doing so may result in battery drain or a malfunction.

• The graphical symbol placed on

the product means direct current.

This unit

Power cord input Rear output or subwoofer output Front output Antenna input Fuse (10 A) Wired remote input Hard-wired remote cont rol adapte r can be connected (sold separately).

Power cord

Perform these connections when not connecting a rear speaker lead to a subwoofer.

Perform these connections when using a subwoofer without the optional amplifier.

In the case of above, two 4 Ω subwoofers wired in parallel will represent a 2 Ω load.

To power cord input Left Right Front sp eaker Rear speaker White White/black Gray Gray/black Green Green/black

English

Violet

NOTE

Important

Leave ample space

5 cm

Screw

Violet/black Black (chassis ground) Connect to a clean, paint-free metal location. Yel l ow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by the ignition switch (12 V DC). Blue/white Connect to the system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Subwoofer (4 Ω) When using a subwoofer of 2 Ω, be sure to connect the subwoofer to the violet and violet/black leads of this unit. Do not connect anything to the green and green/black leads. Not used. Subwoofer (4 Ω) × 2 Orange/white Connect to a car’s illumination signal.

Change the initial menu of this unit. Refer to [SP-P/O MODE] (page 5). The subwoofer output of this unit is monaural.

Power amp (sold separately)

Perform these connections when us ing the optional amplifier.

Connect with RCA cables (sold separately) To front output Front speake r To rear output or subwoofer output Rear speaker or subwoofer

Installation

• Check al l connections and systems before

final installation.

• Do not use unauthorized parts as this

may cause malfunctions.

• Consult your deale r if installation requires

drilling of holes or other modifications to the vehicle.

• Do not install this unit where:

– it may interfere with operation of the

vehicle.

– it may cause injury to a passenger as a

result of a sudden stop.

• The sem iconductor laser will be damaged

if it overheats. Install this unit away from hot places such as near the heater outlet.

• Optimum performance is

obtained when the unit is installed at an angle of less than 60°.

• When installing, to ensure proper heat

dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.

DIN mount installation

1 Insert the supplied mounting sleeve

into the dashboard.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°) into place.

Dashboard Mounting sleeve

• Make sure that the unit is installed

securely in place. An unstable installation may cause skipping or other malfunctions.

When not using the supplied mounting sleeve

1 Determine the appropriate position

where the holes on the bracket and the side of the unit match.

2 Tighten two screws on each sid e.

Removing the unit (installed with the supplied mounting sleeve)

1 Remove the trim ring.

Trim r ing Notched tab

• Rel easing the front panel allows easier

access to the trim ring.

• When reattaching the trim ring, point

the side with the notched tab down.

2 In sert the supplied extracti on keys

into both sides of the unit until they click into place.

3 Pull the unit out of the dashboard.

To secure the front panel

The front panel can be secured with the supplied screw.

System remote control Connect to blue/white cable. Power amp (sold separately)

Screw Mounting bracket Dashboard or console

• Use either truss (5 mm × 9 mm) or

flush surface (5 mm × 9 mm) screws, depending on the bracket screw holes.

15En

Additional Information

Troubleshooting

The displ ay automatically ret urns to the normal display.

→ No operations have been made for

about 30 seconds. – Perform an operation.

The repeat play range changes unexpectedly.

→ Depending on the repeat play range,

the selected range may change when another folder or track is being selected or during fast forwarding/reversing. – Select the repeat play range again.

A subfolder is not played back.

→ Subfolders cannot be played when

[FLD] (folder repeat) is selected. – Select another repeat play range.

The sound is intermittent.

→ You are using a device, such as a cellular

phone, that may cause audible interference. – Move electrical devices that may be

causing the interference away from the unit.

Error messages

Common

AMP ERROR

→ This unit fails to operate or the speaker

connection is incorrect.

→ The protective circuit is activated.

– Check the speaker connection. – Turn the ignition switch OFF and back

to ON again. If the message remains, contact your dealer or an authorized Pioneer Service Station for assistance.

NO XXXX (NO TITLE, for example) → There is no embedded text information.

– Switch the display or play another

CD player

ERROR-07, 11, 12, 17, 30

→ The disc is dirty.

–Clean the disc.

→ The disc is scratched.

– Replace the disc.

ERROR-07, 10, 11, 12, 15, 17, 30, A0

→ There is an electrical or mechanical

error.

– Turn the ignition switch OFF and back

ERROR-15

→ The inserted disc is blank.

– Replace the disc.

ERROR-23

→ Unsupported CD format.

– Replace the disc.

FORMAT READ

→ Someti mes there is a delay between the

start of playback and when you start to

hear any sound.

– Wait until the message disappears and

NO AUDIO

→ The inserted disc does not contain any

playable files.

– Replace the disc.

SKIPPED

→ The inserted disc contains DRM

protected files.

– The protected files are skipped.

track/file.

to ON, or switch to a different source, then back to the CD player.

you hear sound.

PROTECT

→ All the files on the inserted disc are

embedded with DRM. – Replace the disc.

USB device/iPod

FORMAT READ

→ Someti mes there is a delay between the

start of playback and when you start to hear any sound. – Wait until the message disappears and

you hear sound.

NO AUDIO

→ There are no songs.

– Transfer the audio files to the USB

device and connect.

→ The connected USB device has security

enabled. – Follow the USB device instructions to

disable the security.

SKIPPED

→ The connected USB device contains

DRM protected files. – The protected files are skipped.

PROTECT

→ All the files on the connected USB

device are embedded with DRM. – Replace the USB device.

N/A USB

→ The connected USB device is not

supported by this unit. – Disconnect your device and replace it

with a compatible USB device.

HUB ERROR

→ The USB device connected via a USB

hub is not supported by this unit. – Connect the USB device directly to this

unit using a USB cable.

CHECK USB

→ The USB connector or USB cable has

short-circuited.

– Check that the USB connector or USB

cable is not caught in something or damaged.

→ The connected USB device consumes

more than maximum allowable current. – Disconnect the USB device and do not

use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices.

→ The iPod operates correctly but does

not charge. – Make sure the connection cable for

the iPod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back to ON, or disconnect the iPod and reconnect.

ERROR-19

→ Communication failed.

– Perform one of the following

operations, then return to the USB source.

• Turn the ignition switch OFF and

back to ON.

• Disconnect the USB device.

• Change to a different source.

→ iPod failure.

– Disconnect the cable from the iPod.

Once the iPod’s main menu is displayed, reconnect the iPod and reset it.

ERROR-23

→ USB device was not formatted properly.

– Format the USB device with FAT12,

FAT1 6 or FAT 32.

ERROR-16

→ The iPod firmware version is old.

– Update the iPod version.

→ iPod failure.

– Disconnect the cable from the iPod.

Once the iPod’s main menu is displayed, reconnect the iPod and reset it.

16En

English

STOP

→ There are no songs in the current list.

– Select a list that contains songs.

NOT FOUND

→ No related songs.

– Transfer songs to the iPod.

Pandora

ERROR-19

→ Communication failed.

– Disconnect the cable from the device.

Once the device’s main menu is displayed, reconnect the device and reset it.

START UP APP

→ The Pandora application has not st arted

running yet. – Start up the Pandora application.

INOPERABLE

→ The operation was disabled.

– Run the same command for another

track.

TRY LATER

→ Unable to save thumb rat ing. → Unable to save BookMark. → Unable to add station.

– Try again later.

MAINTENANCE

→ Pandora system is undergoing

maintenance. – Try again later.

SKIP LIMIT

→ Due to music licensing restrictions,

Pandora limi ts the total number of sk ips per hour. – Wait until Pandora allows you to skip

again.

UPDATE APP

→ This version of the Pandora application

is not supporte d.

– Connect a device that has a

compatible version of the Pandora application installed.

→ Your Pandora account is not logged in.

– Disconnect the cable from the device,

and log in to your Pandora account. Then reconnect the device.

CHECK DEVICE

→ Device error message displayed in the

Pandora application. – Check the connected device.

PLEASE CREATE A STATION ON THE PHONE

→ No station found.

– Create a station in the Pandora

application on your connected device.

SELECT STN

→ No station selected.

– Select a station.

STATION FULL

→ A new station cannot be added.

– Delete an old station to open a spot

for a new one.

CAN.T DELETE

→ The station could not be deleted.

– Run the same command for another

station.

NO NETWORK

→ The connected device is out of area.

– Connect the device to a network.

NO SERVICE IN THIS COUNTRY

→ The connected device is out of area.

– Connect the device to a network.

STN DELETED

→ The operation was disabled.

– Run the same command for another

station.

Apps

START UP APP

→ The application h as not started running

yet. – Operate the mobile device to start up

the application.

Handling guidelines

Discs and player

• Use only discs that feature either of the

follow ing two lo gos.

• Use 12- cm discs.

• Use only conventional, fully circular discs.

• The following types of discs cannot be

used with this unit: –DualDiscs – 8-cm discs: Attempts to use such discs

with an adaptor may cause the unit to

malfunction. – Oddly shaped discs –Discs other than CDs – Damaged discs, including discs that are

cracked, chipped or warped – CD-R/RW discs that have not been

finalized

• Do not write on or apply chemicals to the

surface of the discs.

• To clean a CD, wipe the disc with a soft

cloth outward from the center.

• Condensation may temporarily impair

the player’s performance. Let it rest for about one hour to adjust to a warmer temperature. Also, wipe any damp discs off with a soft cloth.

• When using discs that can be printed on

label surfaces, check the instructions and the warnings of the discs. Depending on the discs, inserting and ejecting may not

be possible. Using such discs may result in damage to this equipment.

• Do not attach commercially available

labels or other materials to the discs. – The discs may warp making the disc

unplayable.

– The labels may come off during

playback and prevent ejection of the discs, which may result in damage to the equipment.

USB storage device

• Connections via USB hubs are not

supported.

• Firmly secure the USB storage device

before driving. Do not let the U SB storage device fall onto the floor, where it may become jammed under the brake or accelerator pedal.

• Depending on the USB storage device,

the following problems may occur. –Operations may vary. – The storage device may not be

recognized. – Files may not be played back properly. – The device may cause audible

interference when you are listening to

the radio.

iPod

• Do not leave the iPod in places with high

temperatures.

• Firmly secure the iPod when driving. Do

not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator pedal.

• The settings of the iPod such as the

equalizer and repeat play are changed automatically when the iPod is connected to the unit. Once the iPod is disconnected, those settings will return to the original settings.

• Incompatible text saved on the iPod will

not be displayed by the unit.

17En

CAUTION

Compressed audio

CAUTION

Folder Compressed

audio file

to : Playback sequence

01 to 05: Folde r number

compatibility

• Only the first 32 characters can be

displayed as a file name (including the file extension) or a folder name.

• The unit may not work properly

depending on the application used to encode WMA files.

• There may be a slight delay at the start of

the playback of audio files embedded with image data, or audio files stored on a USB device with numerous folder hierarchies.

• Pioneer cannot guarantee compatibility

with all USB mass storage devices, and assumes no responsibility for any loss of data on media players, smartphones, or other devices while using this product.

• Do not leave discs or a USB storage

device in any place that is subject to high temperatures.

WMA files

File extension .wma Bit rate 48 kbps to 320 kbps

Sampling frequency 32 kHz, 44.1 kHz, 48

Windows Media™ Audio Professional, Lossless, Voice/DRM Stream/Stream with video

MP3 files

File extension .mp3 Bit rate 8 kbps to 320 kbps

(CBR), 48 kbps to 384 kbps (VBR)

kHz Not compatible

(CBR) , VBR

Sampling frequency 8 kHz to 48 kHz (32

Compatible ID3 tag versio n

M3u playlist Not compatible MP3i (MP3

interactive), mp3 PRO

kHz, 44.1 kHz , 48 kHz for emphasis )

1.0, 1.1, 2.2, 2.3, 2.4 (ID3 tag Version 2.x is given priority over Versi on 1.x .)

Not compatible

WAV files

• WAV file formats cannot be connected via

MTP.

File extension .wav Quantization bits 8 and 16 (LPCM), 4

Sampling frequency 16 kHz to 48 kHz

(MSADPCM)

(LPCM), 22.05 kHz and

44.1 kHz (MS ADPCM)

Disc

• Regardless of the length of the blank

section between the songs from the original recording, compressed audio discs play with a short pause between songs.

Playable folder hierarchy

Playable folders Up to 99 Playable files Up to 999 File system ISO 9660 Level 1 and

Multi-session playback

Packet write data transfer

Up to eight tiers ( A practical hie rarchy is less than two tiers.)

2, Romeo, Joliet Compatible

Not compatible

USB device

• There may be a sli ght delay when starting

playback of audio files on a USB storage device with numerous folder hierarchies.

Playable folder hierarchy

Playable folders Up to 500 Playable file s Up to 15 000 Playback of copyright -

protected files Partitioned USB

device

Up to eight tiers ( A practical hie rarchy is less than two tiers.)

Not compatible

Only the first par tition can be played.

iPod compatibility

This unit supports only the following iPod models. Supported iPod software versions are shown below. Older versions may n ot be supported. Made for

– iPod touch (1st through 5th generation) –iPodclassic –iPod with video – iPod nano (1st through 7th generation) –iPhone 6 –iPhone 6 Plus –iPhone 5s –iPhone 5c –iPhone 5 –iPhone 4s –iPhone 4 –iPhone 3GS –iPhone 3G –iPhone

• Operations may vary depending on the

generation and/or software version of the iPod.

• Users of iPod with the Lightning

Connector sh ould use the Lightning to USB Cable (supplied with iPod).

• Users of iPod with the Dock Connector

should use the CD-IU51. For details, consult your dealer.

• R efer to the iPod manuals for information

about the file/format compatibility.

• Audiobook, Podcast: Compatible

Pioneer accepts no responsibility for data lost on the iPod, even if that data is lost while this unit is used.

Sequence of audio files

The user cannot assign folder numbers and specify playback sequences with this unit. Sequence of audio file depends on the connected device. Note that the hidden files in a USB device cannot be played back.

Example of a hierarchy

iTunes

Apple and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.

WMA

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and cannot be

18En

+ 42 hidden pages