Pioneer DEH-S4000BT, DEH-S4010BT, DEH-S5000BT, DEH-S5010BT Owner's Manual

CD RDS RECEIVER AUTORADIO CD RDS REPRODUCTOR DE CD CON RECEPTOR RDS

DEH-S5000BT

English Français Español

DEH-S5010BT

Owner’s Manual

Mode d’emploi

DEH-S4000BT

Manual de instrucciones

DEH-S4010BT

Important (Serial number)

The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the en closed warrant y card.

Important (Numéro de série)

Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie.

Importante (Número de serie)

El número de serie se encuentra en la parte inferior de esta unidad. Por su propia seguridad y comodidad, asegúrese de anotar este número en la tarjeta de garantía que se adjunta.

English

About this manual:

Table of Contents

Before You Start....................................................................................... 3

Getting Started........................................................................................ 5

Radio....................................................................................................... 11

CD/USB/iPhone/AUX............................................................................ 12

Bluetooth............................................................................................... 15

App Mode .............................................................................................. 20

Pandora®................................................................................................ 21

Spotify® .................................................................................................. 23

Using Pioneer ARC APP....................................................................... 25

Audio Adjustments .............................................................................. 27

Settings .................................................................................................. 28

FUNCTION settings ............................................................................... 28

AUDIO settings ...................................................................................... 30

SYSTEM settings.................................................................................... 32

ILLUMINATION settings........................................................................ 35

MIXTRAX settings.................................................................................. 36

Connections/Installation .................................................................... 38

Additional Information ....................................................................... 44

• In the following instructions, a USB memory or USB audio player are referred to as

“USB device”.

• When an iPhone is connected to the unit, the source name on the unit appears as

[iPod]. Pl ease note that this unit supp orts only iPhones (iPhone 5 or later) regardless of the source name (for details, refer to page 50).

- 2 -

English

Before You Start

Thank you for purchasing this PIONEER product

To ensure proper use, please read through this manu al before using this product. It i s especially important that you read and observe WAR NI NG s and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.

FCC ID: EW4C95 MODEL NO.: DEH-S5000BT/DEH-S5010BT/DEH-S4000BT/DEH-S4010BT IC: 4250A-C95 This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device mu st accept any interference, includ ing interference that may cause un desired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The Bluetooth ante nna cannot be removed (or replaced) by us er. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

Alteration o r modifications carr ied out without ap propriate authoriza tion may invalidate the user’s right to operate the equipment.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

–Consult the dealer or an experienced radio/TV technician for help.

The Safety of Your Ears is in Your Hands

Get the most ou t of your equipment by playing it at a sa fe level—a level that lets the s ound come through clearl y without annoying blaring or distortion and, most impo rtantly, without affectin g your sensitive hearing. So und can be deceiving.

- 3 -- 3 -

English

Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal”

WAR NING

CAUTION

can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

• Once you have established a comfortable sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

• Do not turn up th e volume so high th at you can’t hear what ’s around you.

• Use caution or temporarily discontinue use in potentially hazardous situations.

• Do not use headphones while operating a motorized vehicle; the use of headphones may create a

traffic hazard and is illegal in many areas.

• Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons with out training and experience in electro nic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.

• Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle

in a safe location before attempting to use the controls on the device.

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WIL L INCREASE EYE HAZARD.

• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result.

Also, damage to this unit, smoke, and overheating could result from contact with liquids.

• Always keep the volume low enough to hear outside sounds.

• This product is evaluated in moderate and tropical climate condition under the Audio, video and

similar electronic apparatus - Safety requirements, IEC 60065.

CAUTION

This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007.

After-sales service for Pioneer products

Please contac t the dealer, distributor from where you purchas ed this unit or the a uthorized PIONEER Service Station for after-sales service or any other information. In case the necessar y information is not available, please contact the companies listed below: Please do not ship your unit to the companies at the addresses listed below for repair without contacting them in advance.

- 4 -

English

U.S.A. and CANADA

Detach button

Display window

M.C. (multi-control) dial

BAND/

DISP (display)

SRC (source)/OFF

USB port

(eject)

AUX input jack (3.5 mm stereo jack)

Disc loading slot

BASS

Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404

For warranty information please see the Limited Warranty sheet included with this unit.

Getting Started

Basic operation

DEH-S5000BT/S5010BT

- 5 -- 5 -

English

DEH-S4000BT/S4010BT

Detach button

Display window

M.C. (multi-control) dial

BAND/

DISP (display)

SRC (source)/OFF

USB port

(eject)

AUX input jack (3.5 mm stereo jack)

Disc loading slot

BASS

SRC (source)

VOLUME +/– MUTE

DISP (display)

Remote Control

Frequently used operations

The available buttons vary depending on the unit.

Purpose

Turn on the power* Press SRC/OFF to turn on

the power. Press and hold SRC/OFF to turn off the power.

Operation

Head Unit Remote Control

Press SRC to turn on the power. Press and hold SRC to turn off the power.

- 6 -

English

Purpose

Adjust the volume Turn the M.C. dial. Press VOLUME + or –.

Select a source Press SRC/OFF repeatedly. Press SRC repeatedly. Change the display

information Return to th e previous

display/list Return to the normal display

from the menu Change the display

brightness Answering a call Press . Press . Ending a call Press . Press . Boost the bass level Press BASS.–

* When this unit ’s blue/white lead is connected to th e vehicle’s auto-antenna re lay control terminal,

the vehicle’s antenn a extends when this unit’s source is turned on. To retract the antenna , turn the source off.

Head Unit Remote Control

Press DISP repeatedly. Press DISP repeatedly.

Press BAND/ . Press / to select the

Press and hold BAN D/ .

Operation

Press MUTE to mute the unit. Press MUTE again or press VOLUME + or – to unmute.

next/previous folder.

–

Display indication

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the button is pressed.

BASS Appears when the BASS button is pressed or [HI]/[LOW] is selected in

[D.BASS] (page 31). Appears when random/shuffle play is set (except when BT AUDIO is

selected as the source). Appears when repeat play is set (except when BT AUDIO is selected as the

source). Appears when a Bluetooth connection is made (page 15).

- 7 -- 7 -

English

Important

Detaching the front panel

Detach Attach

RESET button

Detach the front panel to prevent thef t. Remove any cables and devices attached to the front panel and turn off the unit before detaching it.

• Avoid subjecting the front panel to excessive shock.

• Keep the front pa nel out of direct sunlight a nd high temperatures.

• Always store the detached front panel in a protective case or bag.

Resetting the microprocessor

The microprocessor must be reset in the following situations:

– Before using this unit for the first time after installation – If the unit fails to operate properly – When strange or incorrect messages appear on the display

1 Remove the front panel (page 8). 2 Press the RESET button with a pointed instrument longer than 8 mm.

Preparing the remote control

Remove the insulation sheet before use.

- 8 -

English

WAR NIN G

• Do not ingest the battery, Chemical Burn Hazard.

CAUTION

Important

How to replace the battery

Insert the CR2025 (3 V) battery with the plus (+) and minus (–) poles orientated properly.

(The remote con trol supplied with) This product contains a coi n/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

• Do not expose the battery or remote control to excessive heat such as direct sunlight or fire.

• There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the

battery, repla ce it with the same type.

• Do not handle or store the battery with metallic tools or objects.

• If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a

new battery.

• When disposing of used batteries, please comply with governmental regulations or environmental

public institutions’ rules that apply in your country/area.

• “Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”

• Do not store the remote control in high temperatures or direct sunlight.

• Do not let the remote control fall onto the floor, where it may become jammed under the brake or

accelerat or pedal.

Setup menu

When you turn the ignition switch to ON af ter installation, the setup menu appears in the display.

- 9 -- 9 -

English

1 Turn the M.C. dial to select the options, then press to confirm.

NOTE

To proceed to the next menu option, you need to confirm your selection.

Menu Item Description LANGUAGE Select the language to display the text information from a

[ENG](English), [ESP](Spanish), [FRA] (Canadian French )

CLOCK SET Set the clock.

compressed audio file.

1 Turn t he M.C. dial to adjust th e hour, then press to confirm.

The indicator moves to the minute setting automatically.

2 Turn t he M.C. dial to adjust the minute, then press to confirm.

2 [QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm.

3 Press the M.C. dial to confirm the settings.

These settings can be made at any time from the SYSTEM settings (page 32).

Canceling the demonstration display (DEMO OFF)

1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select [SYSTEM], then press to confirm. 3 Turn the M.C. dial to select [DEMO OFF], then press to confirm. 4 Turn the M.C. dial to select [YES], then press to confirm.

INITIAL settings

1 Press and hold SRC/OFF until the unit turns off. 2 Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select [INITIAL], then press to confirm. 4 Turn the M.C. dial to select an option, then press to confirm.

The options var y depending on the unit.

- 10 -

English

NOTE

Menu Item Description REAR-SP Select when there is a full-range speaker connected to the rear

[FUL] [SW] Select when there is a subwoofer connected directly to the rear

SP-P/O MODE Select when there is a full-range speaker connected to the rear

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to

[REAR/REAR] Select when there are full-range speakers connected to the rear

SYSTEM UPDATE Select [SYSTEM INFO] to confirm the latest system information

[SYSTEM INFO], [S/ W UPDATE]

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

[YES], [NO]

speaker output leads.

speaker output leads without any auxiliary amplifier.

speaker output leads and there is a subwoofer connected to the RCA output.

the rear speaker output leads and there is a subwoofer connected to the RCA output.

speaker output leads and RCA output. If there is a full-range speaker connected to the rear speaker output leads, and the RCA output is not used, you may select either [REAR/SUB.W] or [REAR/REAR].

on the unit. Select [S/W UPDATE] to update the unit to the latest software and initialize the unit settings. For details on the latest software and updating, visit our website.

restarted automatically.

Radio

The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception.

Receiving preset stations

1 Press SRC/OFF to select [RADIO]. 2 Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM]. 3 Press a number button (1/ to 6/).

You can select a preset channel by pressing and turning the M.C. dial.

- 11 -- 11 -

English

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the

NOTE

FUNCTION settings (page28).

Best stations memory (BSM)

The six strongest stations are stored on the number buttons (1/ to 6/).

1 After selecting the band, press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select [FUNCTION], then press to confirm. 3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press / .

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 28).

To store stations manually

While receiving the station you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing.

You can select a preset channel by pressing and turning the M.C. dial. After selecting a channel, press and hold the M.C. dial to store a station.

CD/USB/iPhone/AUX

Playing back

Disconnect headphones from the device before connecting it to the unit.

Insert a disc into the disc loading slot with the label side up.

To eject a disc, stop playback first then press .

- 12 -

English

USB devices (including Android™)/iPhone

NOTE

CAUTION

NOTE

Open the USB port cover.

2 Plug in the USB device/iPhone using an appropriate cable.

To automatically switch to [USB] source when a USB device/ iPhone is connected to the uni t, set [USB AUTO] to [ON] in the SYSTEM settings (page 33).

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 25.

MTP connection

A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device and the numbers of the files in the device, audi o files/songs may not be able to be played back via MTP. Note that MTP con nection is not compatible with WAV file formats and FLAC file formats, and cannot be used with the MIXTRAX function.

If you use an MTP connection, [PHONE CONNECT] needs to be set to [USB MTP] in the SYSTEM settings (page 33).

AUX

Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 32).

Operations

You can make various adjustments in the FUNCTION settings (page 28). Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.

Purpose Operation

Select a folder*1 Press 1/ or 2/. Select a track/song (chapter) Press or . Fast forward or reverse*2 Press and hold or .

- 13 -- 13 -

English

NOTES

Purpose Operation

Search for a file from a list (CD/ USB only) 1 Press to display the list.

View a list of the files in the selected folder/ category*1

Play a song in the selected folder/ category*1

Repeat play Press 6/. Random/shuffle play Press 5/. Pause/resume playback Press 4/PAUS E. Return to root folder (CD/USB only)*1 Press and hold 1/. Switch between compressed audio and CD-

DA (CD o nly)

*1 Compressed a udio files only *2 When you use the fast forward or reverse function while playing a VBR file, the playback time may

be not correct.

2 Tur n the M.C. dial to select the desired

file (folder) name or category, then press to confirm.

3 Tur n the M.C. dial to select the desired

file, then press to confirm. Playback starts.

Press the M.C. dial when a folder/category is selected.

Press and hold the M.C. dial when a folder/ category is selected.

Press BAND/.

About MIXTRAX (USB/iPhone only)

The MIXTRAX function creates a non-stop mix of your music library, accompanied by illumination effects. For details on MIXTRAX settings, see page 36.

• iPhone needs to be connected with Pioneer ARC APP via USB for using this function (page 25).

• This function is not compatible with an Android device connected via MTP.

• Depending on the file/song, sound effects may not be available.

• Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.

1 Press 3/MIX to turn MIXTRAX on/off.

- 14 -

English

Important

NOTES

TIP

Bluetooth

Bluetooth connection

If ten or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly.

1 Turn on the Bluetooth function of the device.

If you make a Bluetooth connection from the device, proceed to step 6.

2 Press to display the phone menu. 3 Turn the M.C. dial to select [BT SETTING], then press to confirm. 4 Turn the M.C. dial to select [ADD DEVICE], then press to confirm.

The unit starts to search for available devices, then displays them in the device list.

• To cancel searching, press the M.C. dial.

• If the desired device is not in the list, select [RE-SEARCH].

• If there is no device available, [NOT FOUND] appears in the display.

5 Turn the M.C. dial to select a device from the device list, then press to confirm.

Press and hold the M.C. dial to switch the displayed de vice information between the Bluetooth device address and device name. If you make a Bluetooth connection from the unit, proceed to step 7.

6 Select [Pioneer BT Unit] shown in the device display. 7 Make sure the same 6-digit number appears on this unit and the device, then

select “Yes” on the device.

• [DEVICE FULL] appears if the unit has already been paired with ten other devices. In this case, delete

one of the paired devices. See [DEL DEVICE] in the Bluetooth settings (page 16).

• Depending on the device, the PIN code is required in step 7. In this case, input [0000].

The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so, [VISIBLE] in the Bluetooth settings ne eds to be set to [ON]. For detail s on Bluetooth device operati ons, refer to the operating instructions supplied with the Bluetooth device.

- 15 -- 15 -

English

Bluetooth settings

Menu Item Description DEVICELIST Display the list of paired Bluetooth devices. “*” appears on the

device name when the Bluetooth connection is established. When no device is selected in the device list, this function is not available.

DEL DEVICE Delete the device information.

[DELETE YES], [DELETE NO]

ADD DEVICE Register a new device.

If ten devices are already paired, this function is not available. You can check the number of paired devices on the [DEVICELIST] setting.

A.CONN Select [ON] to connect to a Bluetooth device automatically.

[ON], [OFF]

VISIBLE Select [ON] so that a Bluetooth device can detect the unit when

[ON], [OFF]

PIN CODE Change the PIN code.

DEV. INFO Switch the device information on the display between the

A.PAIRING Select [ON] to pair the unit and iPhone or Android device

[ON], [OFF]

the unit is connected via Bluetooth to another device.

1 Press the M. C. dial to display the setting mode. 2 Turn t he M.C. dial to select a number. 3 Press the M. C. dial to move the cursor to the next position. 4 After inputting the PIN code, press and hold the M.C. dial.

After inputting the PIN code, pressing the M.C. dial returns you to the PIN code input display, and you can change the PIN code.

device name and Bluetooth device address.

automatically when an iPhone or Android device is connected to the unit via USB. (This function may not be available depending on the version of iOS you are using.)

• When you are using an Android device, this function is

available in the following situations:

– Your device has Android OS 4.4 or later installed. – Be sure to turn on the B luetooth function of the devi ce and confirm

that the device is not connected to the unit via Bluetooth. – [P.APP AUTO ON] needs to be set to [ON] (page33). – Pioneer ARC APP needs to be installed on your Android device and

[PHONE CONNECT] needs to b e set to [APP CONTROL] (page 25). – A confirmation butt on should be pressed on the caution window

displayed on Pioneer ARC APP after a connection with the Pioneer

ARC APP is made.

- 16 -

English

Important

TIP

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 15). Up to two Bluetooth telephones can be connected simultaneously.

• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running

can drain the vehicle’s battery.

• Be sure to p ark your vehicle in a safe place and apply the parking brake before operation.

To make a phone call

Press to display the phone menu.

When two phones are connected, a phone name appears first then a phone menu will display. To switch to another phone, press again.

2 Tu rn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm.

If you select [PHONE BOOK], proceed to step 4.

3 Tu rn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press to

confir m.

4 Tu rn the M.C. dial to select a name or phone number, then press to confirm.

The phone call starts.

To answer an incoming call

Press when a call is received.

When two phones are connected to the unit via Bluetooth and there is an incoming call while one phone is being used for a call, a message will appear in the display. To answer that incoming call, you need to end the existing call.

Basic operations

Purpose Operation

End a call Press . Reject an incoming call Press and hold when a call is received. Switch between the current caller

and a caller on hold Cancel a caller on hold Press and hold . Adjust the volume of the caller’s

voice (When private mode is on, this function is not available.)

Press the M.C. dial.

Tur n the M.C. dial during the call.

- 17 -- 17 -

English

NOTE

Purpose Operation Turn the private mode on or off Press BAND/ during the call.

To preset phone numbers

Select a phone number from a phone book or call history.

2 Press and hold one of the number buttons (1/ to 6/).

The contact is stored in the selected preset number.

To make a call using a preset number, press one of the number buttons (1/ to 6/), then press the M.C. dial.

Voice recognition (Only for iPhone)

This function is only available when an iPhone equipped with voice recognition is connected to the unit via Bluetooth.

1 Press and hold to activate the voice recognition mode. 2 Press the M.C. dial and then talk into the microphone to input voice commands.

To exit the voice recognition mode, press BAND/.

For details on the voice recognition features, refer to the manual supplied with your iPhone.

Phone menu

Menu Item Description RECENTS Display the missed call history.

[MISSED] [DIALED] Display the dialed call history. [RECEIVED] Display the received call history.

PHONE BOOK Display the contacts in your phone. Set [VISIBLE] in the

PRESET 1-6 Recall the preset phone numbers. You can also recall the preset

A.ANSR* Select [ON] to answer an incoming call automatically.

[ON], [OFF]

R.TONE Select [ON] if the ring tone does not come out from the car

[ON], [OFF]

Bluetooth settings to [ON] to browse the contacts via this unit.

phone numbers by pressing one of the number buttons (1/ to 6/).

speakers. Depending on the connected phone, this function may not work.

- 18 -

English

Important

Menu Item Description PB INVT Invert the order of names in the phone book (name view). BT SETTING You can adjust various settings for Bluetooth connections. For

* If two phones are connected, this function does not work on incoming calls that are received while

one of the phones is being used for a call.

details on Bluetooth settings, see page 16.

Bluetooth audio

• Depending on the B luetooth audio player connected to thi s unit, the available operations will be

limited to the following two levels: – A2DP (Advanced Audio Dist ribution Profile) can only play back songs on you r audio player. – AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select

song, etc.

• The sound of the Bluetooth audio player will be muted when the phone is in use.

• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone

automatically.

• Depending on the type of Bluetooth audio player you have connected to this unit, operation and

information displayed may vary based on availability and functionality.

1 Make a Bluetooth connection with the Bluetooth audio player. 2 Press SRC/OFF to select [BT AUDIO] as the source. 3 Press BAND/ to start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 28).

Purpose Operation

Fast forward or reverse Press and hold or . Select a track Press or . Repeat play* Press 6/. Random play* Press 5/. Pause/resume playback Press 4/PAUS E. Search for a file from a list 1 Press to display a list.

2 Tur n the M.C. dial to select the desired

folder name, then press to confirm.

3 Tur n the M.C. dial to select the desired

file, then press to confirm.

Playback starts.

- 19 -- 19 -

English

Important

NOTE

Purpose Operation

Switch the Bluetooth device name in the device list according to the connec tion order

* Depending on the connected device, these operations may not be available.

Press 1/ or 2/.

App Mode

You can enjoy listening to an application on an iPhone/Android device via the unit. In some cases, you can control an application by using the unit. For details on compatible devices, visit our website.

Use of third part y apps may involve or require the provisio n of personally identifiable information, whether through the creation of a user account or otherwise, and for certain applications, the provision of geolocation da ta. ALL THIRD PART Y APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES. BY ACCESSING THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT CONSENT TO THE USE OF GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY APP.

For iPhone use rs

This function is compatible with iPhones installed with iOS 6.0 or later.

For Android device users

This function is compatible with devices that have Android OS 2.3 or later installed.

PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER.

Playback of an application via the unit

1 Connect this unit with the mobile device.

• iPhone via USB (page 13)

• iPhone/Android device via Bluetooth (page 15)

2 Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select [SYSTEM], then press to confirm. 4 Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.

- 20 -

English

5 Turn the M.C. dial to select one of the below, then press to confirm.

NOTE

• Select [IPHONE] for iPhone.

• Select [ANDROID] for Android device.

6 Turn the M.C. dial to select one of the below.

• Select [WIRED] for the USB connection.

• Select [BLUETOOTH] for the Bluetooth connection.

When the connec tion setting is changed, a me ssage that lets you know that the connectio n setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm . The unit turns off automatica lly and the setting is executed.

7 Press SRC/OFF to select [APP]. 8 Operate the mobile device to start up the application.

When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly.

Basic operations

You can make various adjustments in the FUNCTION settings (page 28).

Purpose Operation

Select a track Press or . Fast forward or reverse Press and hold or . Pause/resume playback Press BAND/.

Pandora®

Pandora internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com. The Pandora mobile application is available for iPhone and Android phones. Please visit www.pandora.com/everywhere/mobile for the latest compatibility information.

Listening to Pandora

Update the firmware of the Pandora application to the latest version before use.

1 Connect this unit with the mobile device.

- 21 -- 21 -

English

• iPhone via USB (page 13)

NOTE

• iPhone/Android device via Bluetooth (page 15)

If you choose a USB connection, proceed to step 6.

2 Press SRC/OFF to select [PANDORA]. 3 Press and hold 1/ to display [PHONE CONNECT]. 4 Turn the M.C. dial to select one of the below, then press to confirm.

• Select [IPHONE] for iPhone.

• Select [ANDROID] for Android device.

5 Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via

Bluetooth.

6 Press SRC/OFF to select [PANDORA]. 7 Launch the Pandora application on the mobile device and start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 28).

Purpose Operation

Skip a track Press . Switch between Shuffle and the

station Change the sort order Press (list), then select one of the following.

Play When Shuffle or the station is selected, press the

Press (list), then turn the M.C. dial to select the Shuffle or the desired station.

[ABC]: Sort the items in the list alphabetically. [DATE]: Sort the items in the list in order of the

dates on which the items were created.

M.C. dial.

- 22 -

English

NOTE

Important

Purpose Operation

Delete a station 1 When the station is selected, press and hold the

Pause/resume playback Press 4/PAUSE. Thumbs U p Press 1/. Thumbs D own Press 2/. Create a new station based on the

track currently being played Create a new station based on the

artist currently being played Store the track information currently

being played in your Pandora account.

Some functions of Pandora may not be operated from the unit.

M.C. dial. [DELETE YES] appears.

2 Press the M.C. dial. To cancel, press BAND/ in step 1.

Press and hold 5/.

Press and hold 6/.

1 Press and hold 3/MIX.

[BOOKMARK] appears.

2 Press the M.C. dial.

Spotify®

Spotify is a music streaming distribution service not affiliated with Pioneer. More information is available at http://www.spotify.com. The Spotify application is available for compatible smartphones, please visit https:// support.spotify.com/ for the latest compatibility information. To enjoy Spotify as you drive, first download the Spotify app to your iPhone or Android device. You can download it on the iTunes App Store or Google Play™. Choose a free account or a paid Premium account, either in the app or at spotify.com. A Premium account gives you more features, like offline listening.

• This product incorporates Spotify software which is subject to 3rd party licenses found here:

www.spotify.com/connect/third-party-licenses.

• For information on the countrie s and regions where Spotify can be us ed, take a look at https://

www.spotify.com/us/select-your-country/.

Listening to Spotify

Update the firmware of the Spotify application to the latest version before use.

- 23 -- 23 -

English

1 Connect this unit with the mobile device.

NOTE

• iPhone via USB (page 13)

• iPhone/Android device via Bluetooth (page 15)

If you choose a USB connection, proceed to step 6.

2 Press SRC/OFF to select [SPOTIFY]. 3 Press and hold 1/ to display [PHONE CONNECT]. 4 Turn the M.C. dial to select one of the below, then press to confirm.

• Select [IPHONE] for iPhone.

• Select [ANDROID] for Android device.

5 Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via

Bluetooth.

6 Press SRC/OFF to select [SPOTIFY]. 7 Launch the Spotify application on the mobile device and start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 28).

The available operations may vary according to the type of contents (track/album/artist/playlist/radio) you want to play.

Purpose Operation

Skip a track Press or . Search for a track from a list 1 Press (list) to display the list.

Pause/resume playback Press 4/PAUSE.

2 Tur n the M.C. dial to select the desired

category, then press to confirm.

3 Tur n the M.C. dial to select the desired

file, then press to confirm. Playback starts.

- 24 -

English

NOTE

WAR NIN G

NOTE

Purpose Operation

Thumbs Up (Only for radio) Press 1/. Thumbs Down (Only for radio) Press 2/. Random play (Only for track/album/artist/

playlist) Repeat play (Only for track/album/artist/

playlist) Start a radio channel based on the song

currently being played.

Some functions of Spotify may not be operated from the unit.

Press 5/.

Press 6/.

1 Press and hold 5/ to start a radio. 2 Press the M.C. dial.

• This function may not be available

depending on the selected song.

Using Pioneer ARC APP

You can operate the unit from Pioneer ARC APP installed on an iPhone/Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc., by using the unit. For details on what operations are available on the application , see the application’s help section.

Do not attempt to op erate the application while dr iving. Make sure to pull off the road and pa rk your vehicle in a safe location before attempting to use the controls on the application.

For iPhone use rs

This function is compatible with iPhones (iPhone 5 or later) installed with iOS 8.0 or later. You can download Pioneer ARC APP on iTunes App Store.

For Android device users

This function is compatible with devices that have Android OS 4.1 or later installed and also support AOA (Android Open Accessory) 2.0. You can download Pioneer ARC APP on Google Play.

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design , regardless of the OS version.

- 25 -- 25 -

English

NOTE

Making a connection with Pioneer ARC APP

1 Connect this unit with the mobile device.

• iPhone/Android device via USB (page 13)

• iPhone/Android device via Bluetooth (page 15)

2 Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select [SYSTEM], then press to confirm. 4 Turn the M.C. dial to select [PHONE CONNECT], then press to confirm. 5 Turn the M.C. dial to select one of the below, then press to confirm.

• Select [IPHONE] for iPhone.

• Select [ANDROID] for Android device.

6 Turn the M.C. dial to select one of the below.

When [IPHONE] is selected in step 5

• Select [WIRED] for the USB connection.

• Select [BLUETOOTH] for the Bluetooth connection.

When [ANDROID] is selected in step 5

• Selec t [APP CONTROL] for the USB connection.

• Select [BLUETOOTH] for the Bluetooth connection.

When you select the USB connection, Pioneer ARC APP on the Android device starts automatically if [ON] is selected in [P.APP AUTO ON] (page 33).

If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you to install the application will app ear on your Android device. Select [OFF] in [P.APP AUTO ON] to clear the message (page 33).

7 Press SRC/OFF to select any source. 8 Launch Pioneer ARC APP on the mobile device via USB connection.

Press and hold M.C. dial via Bluetooth connection.

- 26 -

English

NOTE

Listening to music on Android

1 Press SRC/OFF to select [ANDROID].

Basic operations

Purpose Operation

Select a track Press or . Fast forward or reverse Press and hold or . Pause/resume playback Press 4/PAUS E.

Audio Adjustments

You can also make various adjustments in the AUDIO settings (page 30).

Adjusting the cut-off frequency value and the slope value

You can adjust the cut-off frequency value and the slope value of each speaker. The following speakers can be adjusted. [FRONT], [REAR], [SUBWOOFER]

[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 30).

1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select [AUDIO], then press to confirm. 3 Turn the M.C. dial to select [CROSSOVER], then press to confirm. 4 Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then press to

confirm.

5 Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit (filter),

then press to confirm.

6 Turn the M.C. dial to select an appropriate cut-off frequency for the speaker unit

(filter) selected in step 4, then press to confirm.

[25HZ] to [250HZ]

- 27 -- 27 -

English

7 Turn the M.C. dial to select an appropriate slope for the speaker unit (filter)

selected in step 4.

[–6] to [–24] (if you choose [FRONT] or [REAR]) [–6] to [–36] (if you choose [SUBWOOFER])

Settings

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select one of the categories below, then press to confirm.

• FUNC TION settings (page 28)

• AUDIO settings (page 30)

• SYSTEM settings (page 32)

• ILLUMINATION settings (page 35)

• MIXTRAX settings (page 36)

3 Turn the M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.

Menu Item Description

BSM

Store the six strongest stations on the number buttons (1/ to 6/ ) automatically.

LOC AL

FM: [OFF], [LV1], [LV2], [LV3], [LV4] AM: [OFF], [LV1], [LV2]

SEEK

[MAN], [PCH] Assign or buttons to seek the stations

SAVE

Restrict the tuning station according to the signal strength.

one by one (manual tuning) or select a station from the preset channels.

Store the information about the song currently being played to your music list on Spotify.

- 28 -

English

Menu Item Description

iPod

USB

iPod

AUX

UNSAVE

Remove the song information stored in [SAVE].

SEL DEVICE

Connect a Bluetooth device in the list.

S.RTRV

[1] (effective for low compression rates), [2] (effective for high compression rates), [OFF]

Enhance compressed audio and restore rich sound.

BOOKMARK

Store the track information currently being played in your Pandora account.

NEW STATION

[FROM TRACK], [FROM ARTIST] Create a new station based on the track or artist

currently being played.

PAUS E

Pause or resume playback.

PLAY

Start playback.

STOP

Stop playback.

- 29 -- 29 -

English

AUDIO settings

Menu Item Description EQ SETTING

[SUPER BASS], [POWERFUL], [NATURAL], [VOCAL], [CUSTOM1], [CUSTOM2], [FLAT]

Select an equalizer band and level for further customizing. Equalizer band: [50HZ] to [12.5kHZ]

Equalizer level: [–6] to [+6]

FAD ER *1*2

BALANC E

SUBWOOFER

[ON], [OFF] Set to [ON] when using a subwoofer speaker.

SUBWOOFER*3*4

[NOR], [REV] Select the subwoofer phase.

SPEAKER LEVEL

Typ es of spea ker: [FRONT L],

[FRONT R], [REAR L], [REAR R], [SUBWOOFER]

Output level: [–24] to [10]

CROSSOVER

POSITION

[OFF], [FRONT LEFT] (front seat left), [FRONT RIGHT] (front seat right), [FRONT] (front seats), [ALL]

Select or customize the equalizer curve.

• When you select a setting other than

[CUSTOM1] and [CUSTOM2], you can also customize the equalizer curve by pressing and holding the M.C. dial, then store the customized equalizer curve in [CUSTOM1].

Adjust the front and rear speaker balance.

Adjust the left and right speaker balance.

Select a speaker unit (filter) and adjust the output level.

• Each value you have adjusted changes when

you change the [POSITION] setting (page 30).

Select a speaker unit (f ilter) to adjust the HPF or LPF cut-off frequency and the slope for each speaker unit. For details on the [CROSSOVER] setting, see page 27.

Select a listening posit ion to adjust the speakers' output levels automatically and add a delay time that corresponds to the number and locations of occupied seats.

- 30 -

+ 139 hidden pages