Pioneer DEH-P1Y User Manual [pt]

Operation Manual

Multi-CD control High power CD/MP3/WMA player with FM/AM tuner

DEH-P1Y

English

Español

Português (B)

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for future reference.

Before You Start

About this manual 5 Precautions 5 Features 5 About WMA 5 Resetting the microprocessor 6 Protecting your unit from theft 6



Removing the front panel 7



Attaching the front panel 7

About the demo mode 7



Reverse mode 7



Feature demo 7

Use and care of the remote control 8



Installing the battery 8



Using the remote control 8



FUNCTION button and AUDIO button 8

Whats What

Head unit 10 Remote control 11

Basic Operations

Turning the unit on 12 Selecting a source 12 Loading a disc 12 Adjusting the volume 13 Turning the unit off 13

Tuner

Listening to the radio 14 Introduction of advanced tuner

operation 15 Storing broadcast frequencies 15 Recalling broadcast frequencies 15 Storing the strongest broadcast

frequencies 16 Selecting stations from the preset channel

list 16

Tuning in strong signals 16

Built-in CD Player

Playing a CD 18 Selecting a track directly 18 Introduction of advanced built-in CD player

operation 19 Repeating play 19 Playing tracks in a random order 19 Scanning tracks of a CD 20 Pausing CD playback 20 Selecting the search method 20 Searching every 10 tracks in the current

disc 20 Using compression and BMX 21 Entering disc titles 21 Using CD TEXT functions 22



Displaying titles on CD TEXT discs 22



Scrolling titles in the display 22



Selecting tracks from the track title list 22

MP3/WMA/WAV Player

Playing MP3/WMA/WAV 23 Selecting a track directly in the current

folder 24 Introduction of advanced built-in CD player

(MP3/WMA/WAV) operation 24 Repeating play 25 Playing tracks in a random order 25 Scanning folders and tracks 25 Pausing MP3/WMA/WAV playback 26 Selecting the search method 26 Searching every 10 tracks in the current

disc 26 Switching the tag display 26 Using compression and BMX 27

Contents

English

Displaying text information on MP3/WMA/

WAV disc 27



When playing back an MP3/WMA disc 27



When playing back a WAV disc 27 Scrolling text information in the display 28 Selecting tracks from the file name list 28

Multi-CD Player

Playing a CD 29 Selecting a track directly 29 50-disc multi-CD player 30 Introduction of advanced multi-CD player

operation 30 Repeating play 31 Playing tracks in a random order 31 Scanning CDs and tracks 31 Pausing CD playback 32 Using ITS playlists 32



Creating a playlist with ITS programming 32



Playback from your ITS playlist 32



Erasing a track from your ITS playlist 33



Erasing a CD from your ITS playlist 33

Using disc title functions 33



Entering disc titles 33



Selecting discs from the disc title list 34

Using CD TEXT functions 34



Displaying titles on CD TEXT discs 34



Scrolling titles in the display 35



Selecting tracks from the track title list 35

Using compression and bass emphasis 35

TV tuner

Watching the TV tuner 36 Introduction of advanced TV tuner

operation 37 Storing broadcast stations 37 Recalling broadcast stations 37 Storing the strongest broadcast stations

sequentially 37 Selecting stations from the preset channel

list 38

DVD Player

Playing a disc 39 Selecting a disc 39 Introduction of advanced DVD player

operation 40 Repeating play 40 Pausing disc playback 40 Playing tracks in a random order 41 Scanning tracks of a CD 41 Using ITS playlist and disc title functions 41 Using disc title functions 41



Entering disc titles 41

Audio Adjustments

Introduction of audio adjustments 42 Compensating for equalizer curves (EQ-

EX) 42 Setting the sound focus equalizer

(SFEQ) 43 Using balance adjustment 43 Using the equalizer 44



Recalling equalizer curves 44



Adjusting equalizer curves 44



Fine-adjusting equalizer curve 44 Adjusting bass and treble 45 Adjusting loudness 45 Using subwoofer output 46



Adjusting subwoofer settings 46

Contents

Using nonfading output 46



Adjusting nonfading output level 47 Using the high pass filter 47 Adjusting source levels 47 Using automatic sound levelizer 48

Initial Settings

Adjusting initial settings 49 Setting the clock 49 Setting the FM tuning step 49 Setting the AM tuning step 50 Switching the warning tone 50 Switching the auxiliary setting 50 Switching the dimmer setting 50 Adjusting the brightness 51 Setting the rear output and subwoofer

controller 51

Switching the telephone muting/

attenuation 51 Switching the motion screen 52 Switching the Ever Scroll 52 Switching the flap auto open 52

Other Functions

Turning the clock display on or off 53 Using the AUX source 53



Selecting AUX as the source 53



Setting the AUX title 53 Using different entertainment displays 54 Rewriting the entertainment displays 54 Using the PGM button 54

MP3, WMA and WAV files 57



MP3 additional information 58



WMA additional information 58



WAVadditional information 59 About folders and MP3/WMA/WAV files 59 Terms 60 Specifications 62

Additional Information

Understanding built-in CD player error

messages 56

Understanding error message on rewriting

the entertainment displays 56 CD player and care 56 CD-R/CD-RW discs 57

Before You Start

Section

About this manual

This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this units potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe precautions noted on this page and in other sections.

Precautions

CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

! Keep this manual handy as a reference for

operating procedures and precautions.

! Always keep the volume low enough so

that you can hear sounds from outside the vehicle.

! Protect this unit from moisture. ! If the battery is disconnected or dis-

charged, the preset memory will be erased and must be reprogrammed.

! If this unit does not operate properly, con-

tact your dealer or nearest authorized Pioneer Service Station.

Features

CD playback

Music CD/CD-R/CD-RW playback is possible.

MP3 file playback

You can play back MP3 files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings). ! Supply of this product only conveys a li-

cense for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com.

WMA file playback

You can play back WMA files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings).

WAV file playback

You can play back WAV files recorded on CDROM/CD-R/CD-RW (Linear PCM (LPCM)/MS ADPCM recordings).

About WMA

English

Section

Before You Start

The Windows Media" logo printed on the box indicates that this unit can play back WMA data. WMA is short for Windows Media Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later. Microsoft, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Notes

! With some applications used to encode WMA

files, this unit may not operate correctly.

! With some applications used to encode WMA

files, album names and other text information may not be correctly displayed.

Resetting the microprocessor

The microprocessor must be reset under the following conditions: ! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly ! When strange or incorrect messages ap-

pear on the display

% Press RESET with a pen tip or other pointed instrument.

RESET button

Protecting your unit from theft

The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. ! If the front panel is not detached from the

head unit within five seconds of turning off the ignition, a warning tone will sound.

! You can turn off the warning tone. See

Switching the warning tone on page 50.

Important

! Never use force or grip the display and the

buttons too tightly when removing or attaching.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

! A few seconds after turning the ignition

switch to on or off, the front panel automatically moves. When this happens, your fingers may become jammed in the panel, so keep your hands away from it.

! When removing the front panel, be sure to

hold the corrugated release button on the rear of the front panel while pulling.

Before You Start

Section

Removing the front panel

1 Press EJECT to open the front panel.

2 Slide and remove the front panel toward you.

Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent permanent damage.

3 Put the front panel into the protective case provided for safe keeping.

Attaching the front panel

1 Make sure the inner cover is closed.

2 Replace the front panel by clipping it into place.

About the demo mode

This unit features two demonstration modes. One is the reverse mode, the other is the feature demo mode. ! You cannot cancel a demo mode when the

front panel is open.

! When the front panel is open, BAND,

ENTERTAINMENT, EQ and EQ-EX are not

available.

Important

The red lead (ACC) of this unit should be connected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.

Reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing BAND when power to this unit is turned off while the ignition switch is set to ACC or ON cancels the reverse mode. Press BAND again to start the reverse mode.

Feature demo

The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. Pressing ENTERTAINMENT during feature demo operation cancels the feature demo mode. Press ENTERTAINMENT again to start the feature mode. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

English

Section

Before You Start

Use and care of the remote control

Installing the battery

Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus () poles pointing in the proper direction. ! When using for the first time, pull out the

film protruding from the tray.

WARNING

Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.

CAUTION

! Use only one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not

used for a month or longer.

! Do not recharge, disassemble, heat or dispose

of the battery in fire.

! Do not handle the battery with metallic tools. ! Do not store the battery with metallic materi-

als.

! In the event of battery leakage, wipe the re-

mote control completely clean and install a new battery.

! When disposing of used batteries, please

comply with governmental regulations or environmental public institutions rules that apply in your country/area.

Using the remote control

Point the remote control in the direction of the front panel to operate. ! The remote control may not function prop-

erly in direct sunlight.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the brake or accelerator pedal.

FUNCTION button and AUDIO button

You can also select the desired mode by FUNCTION button and AUDIO button on the remote control. But operation of FUNCTION button and AUDIO button on the remote control differs from the operation of Multi-Control on the head unit. When operating the remote control, switch through the modes as described below to select the mode.

FUNCTION button operation

% Press FUNCTION to select the desired mode (e.g., built-in CD player).

Press FUNCTION repeatedly to switch between the following modes:

Repeat (repeat play)Random (random play) Scan (scan play)Pause (pause)FF/REV (search method)Tag Read (tag display) COMP/BMX (compression and BMX)disc

title input

Note

Refer to Introduction of advanced built-in CD player operation on page 19.

Before You Start

Section

AUDIO button operation

% Press AUDIO to select the desired mode.

Press AUDIO repeatedly to switch between the following modes: Fad (balance adjustment)EQ (equalizer curve adjustment)Bass (bass and treble level adjustment)Loud (loudness) Sub-W1 (subwoofer on/off setting)/NonFad (nonfading output on/off setting)Sub-W2 (subwoofer setting)/NonFad (nonfading output setting)HPF (high pass filter)SLA (source level adjustment)ASL (automatic sound levelizer)

Note

Refer to Introduction of audio adjustments on page 42.

English

Section

Whats What

Head unit

1 ATT button

Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level.

2 CLOCK button

Press to change to the clock display.

3 DISPLAY button

Press to select different displays.

4 LIST button

Press to display the disc title list, track title list, folder list, file list or preset channel list according to the source.

5 Multi-Control

Move to do manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. Turn it to increase or decrease the volume.

6 RESET button

Press to reset the microprocessor.

7 EJECT button

Press to eject a CD from your built-in CD player.

8 EQ-EX button

Press and hold to switch between EQ-EX and SFEQ functions. Press to operate each function.

9 EQ button

Press to select various equalizer curves.

a ENTERTAINMENT button

Press to change to the entertainment display.

b BAND button

Press to select among three FM bands and one AM band and to cancel the control mode of functions.

c SOURCE button

This unit is turned on by selecting a source. Press to cycle through all the available sources.

def

Whats What

Section

Remote control

Operation is the same as when using the buttons on the head unit.

d VOLUME buttons

Press to increase or decrease the volume.

e AUDIO button

Press to select various sound quality controls.

i CLEAR button

Press to cancel the input number when NUMBER are used.

j NUMBER buttons

Press to directly select the desired track, preset tuning or disc. Buttons 16 can operate the preset tuning for the tuner or disc number search for the multi-CD player.

k TUNER button

Press to select the tuner as the source.

l CD button

Press to select the built-in or multi-CD player as the source.

m PGM button

Press to operate the preprogrammed functions for each source. (Refer to Using the PGM button on page 54.)

English

f FUNCTION button

Press to select functions.

g Joystick

Move to do manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. Functions are the same as Multi-Control except for volume control.

h DIRECT button

Press to directly select the desired track.

Section

Basic Operations

Turning the unit on

% Press SOURCE to turn the unit on.

When you select a source the unit is turned on.

Selecting a source

You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to page 18).

% When using the head unit, press SOURCE to select a source.

Press SOURCE repeatedly to switch between the following sources:

TunerTelevisionDVD player/MultiDVD playerBuilt-in CD playerMultiCD playerExternal unit 1External unit 2AUX

% When using the remote control, press TUNER or CD to select a source.

Press each button repeatedly to switch between the following sources:

TUNER: TunerTelevisionSources off CD: DVD player/Multi-DVD playerBuilt-

in CD playerMulti-CD playerSources off

! External unit refers to a Pioneer product (such

as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two external units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.

! When this units blue/white lead is connected

to the vehicles auto-antenna relay control terminal, the vehicles antenna extends when this units source is turned on. To retract the antenna, turn the source off.

Loading a disc

1 Press EJECT to open the front panel.

CD loading slot appears.

# After a CD has been inserted, press SOURCE to select the built-in CD player.

2 Insert a CD into the CD loading slot.

Front panel is closed automatically, and playback will start.

CD loading slot

Notes

! In the following cases, the sound source will

not change:  When there is no unit corresponding to the

selected source connected to this unit.

 When there is no disc in the unit.  When there is no disc in the DVD player.  When there is no magazine in the multi-

CD player.

 When there is no magazine in the multi-

DVD player.

 When the AUX (auxiliary input) is set to off

(refer to page 50).

# You can eject a CD by pressing EJECT.

Notes

! The built-in CD player plays one, standard, 12-

cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

Basic Operations

Section

! There is sometimes a delay between starting

up CD playback and the sound being issued. When being read in, Format Read is displayed.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.

! If the built-in CD player does not operate prop-

erly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page 56.

! You can eject the CD by pressing and holding

EJECT with opening the front panel when the CD loading or ejecting cannot operate properly.

Adjusting the volume

% Use Multi-Control to adjust the sound level.

With the head unit, rotate Multi-Control to increase or decrease the volume. With the remote control, press VOLUME to increase or decrease the volume. Volume bar and power output mode (40W or 60W) are displayed while volume is adjusted.

English

! Please refer to the installation manual for

the power setting switch.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

123

Section

Tuner

Listening to the radio

These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.

Important

If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 50).

1 Band indicator

Shows which band the radio is tuned to, AM or FM.

2 Preset number indicator

Shows which preset has been selected.

2 Press BAND to select a band.

Press BAND until the desired band is displayed, FM1, FM2, FM3 for FM or AM.

3 To perform manual tuning, push Multi-Control left or right.

The frequencies move up or down step by step.

4 To perform seek tuning, push and hold Multi-Control left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by pushing Multi-Control left or right. # If you push and hold Multi-Control left or right you can skip stations. Seek tuning starts as soon as you release Multi-Control.

3 Stereo (ST) indicator

Shows that the frequency selected is being broadcast in stereo.

4 LOC indicator

Shows when local seek tuning is on.

5 Frequency indicator

Shows to which frequency the tuner is tuned.

1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed.

Tuner

Section

Introduction of advanced tuner operation

1 Function display

Shows the function status.

1 Press Multi-Control to display the main menu. FUNCTION and AUDIO appear on the display.

2 Use Multi-Control to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn Multi-Control to select the function.

Turn Multi-Control clockwise to switch between the functions in the following order: BSM (best stations memory)Local (local seek tuning)

# You can also switch between the functions in the reverse order by turning Multi-Control counterclockwise. # To return to the frequency display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Storing broadcast frequencies

You can easily store up to six broadcast frequencies for later recall.

1 When you find a frequency that you want to store in memory press LIST to switch to the preset channel list mode.

2 Use Multi-Control to select the preset number.

Turn to change the preset number; press to select. 16 is displayed as the preset tuning number is selected.

3 Press Multi-Control and hold to store the radio station frequency in memory.

The selected radio station frequency has been stored in memory.

# If you do not operate the list within about 8 seconds, the preset channel list mode is cancelled automatically.

Notes

! Up to 18 FM stations, six for each of the three

FM bands, and six AM stations can be stored in memory.

! You can also store radio station frequencies

assigned to preset tuning numbers by pressing and holding one of the preset tuning buttons 16 on the remote control.

Recalling broadcast frequencies

You can recall radio station frequencies assigned to preset tuning numbers.

English

Section

Tuner

% Push Multi-Control up or down to recall radio station frequencies.

Pushing Multi-Control up or down selects the preset tuning number. P1  P6 is displayed as the preset tuning number is selected. The radio station frequency assigned to the preset tuning number is recalled from memory.

# If you do not operate the list within about 8 seconds, the preset channel list mode is cancelled automatically.

Note

You can also recall radio station frequencies assigned to preset tuning numbers by pressing one of the preset tuning buttons 16 on the remote control.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button.

# You can also change the station by pushing Multi-Control up or down.

Note

Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 16.

Selecting stations from the preset channel list

The preset channel list lets you see the list of preset stations and select one of them to receive.

1 Press LIST to switch to the preset channel list mode during the frequency display.

2 Use Multi-Control to select the desired station.

Turn to change the station; press to select.

# You can also change the station by pushing Multi-Control up or down. # If you do not operate the list within about 8 seconds, the preset channel list mode is cancelled automatically.

1 Use Multi-Control to select BSM. BSM appears in the display.

2 Press Multi-Control to turn BSM on. BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be stored under preset tuning numbers 16 in the order of their signal strength. When finished, the preset channel list appears.

# To cancel the storage process, press

Multi-Control.

3 Use Multi-Control to select the desired station.

Turn to change the station; press to select.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1 Use Multi-Control to select Local. Local appears in the display.

2 Press Multi-Control to turn local seek tuning on.

Local seek sensitivity (e.g., Local 2) appears in the display.

Tuner

Section

# To turn local seek tuning off, press

Multi-Control again.

3 Push Multi-Control left or right to set the sensitivity.

There are four levels of sensitivity for FM and two levels for AM: FM: Local 1Local 2Local 3Local 4 AM: Local 1Local 2 The Local 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

English

Section

Built-in CD Player

Playing a CD

These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on the next page.

1 Track number indicator

Shows the track currently playing.

2 Disc title indicator

Shows the title of the currently playing disc. ! If no title has been entered for the cur-

rently playing disc, nothing is displayed.

3 Play time indicator

Shows the elapsed playing time of the current track.

1 Press SOURCE to select the built-in CD player.

Press SOURCE until you see Compact Disc displayed.

# If no disc is loaded in the unit, you cannot select Compact Disc (built-in CD player). Insert a disc in the unit. (Refer to page 12.)

3 To skip back or forward to another track, push Multi-Control left or right.

Pushing Multi-Control right skips to the start of the next track. Pushing Multi-Control left once skips to the start of the current track. Pushing again will skip to the previous track.

Note

When a CD TEXT disc is inserted, the disc title automatically begin to scroll in the display. When Ever Scroll is set to ON at the initial setting, the disc title scroll continuously. About Ever Scroll, refer to Switching the Ever Scroll on page

52.

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number. ! You cannot operate this mode from func-

tion display.

1 Press DIRECT.

Track number input display appears.

2 Press NUMBER buttons to enter the desired track number.

# You can cancel the input number by pressing

CLEAR.

3 Press DIRECT.

The track of entered number will play.

2 To perform fast forward or reverse, push and hold Multi-Control left or right.

# If you select ROUGH SEARCH, pushing and holding Multi-Control left or right enables you to search every 10 tracks in the current disc. (Refer to Selecting the search method on page 20.)

Note

After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

Built-in CD Player

Section

Introduction of advanced built-in CD player operation

1 Function display

Shows the function status.

1 Press Multi-Control to display the main menu. FUNCTION and AUDIO appear on the display.

2 Use Multi-Control to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn Multi-Control to select the function.

Turn Multi-Control clockwise to switch between the functions in the following order:

Repeat (repeat play)Random (random play) Scan (scan play)Pause (pause)FF/REV (search method)Tag Read (tag display) COMP/BMX (compression and BMX)disc

title input

# You can also switch between the functions in the reverse order by turning Multi-Control counterclockwise.

# To return to the playback display, press BAND.

! If you do not operate the function within about

30 seconds, the display is automatically returned to the playback display.

Repeating play

Repeat play lets you hear the same track over again.

1 Use Multi-Control to select Repeat. Repeat appears in the display.

2 Press Multi-Control to turn repeat play on. Repeat :ON appears in the display. The track

currently playing will play to the end and then repeat.

# To turn repeat play off, press Multi-Control again.

Note

If you perform track search or fast forward/reverse, repeat play is automatically cancelled.

Playing tracks in a random order

Random play lets you play back tracks on the CD in a random order.

1 Use Multi-Control to select Random. Random appears in the display.

English

Notes

! When playing audio data (CD-DA), tag display

is not effective even if you turn Tag Read (tag display) on. (Refer to page 26.)

2 Press Multi-Control to turn random play on. Random :ON appears in the display. Tracks

will play in a random order.

# To turn random play off, press Multi-Control again.

Section

Built-in CD Player

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1 Use Multi-Control to select Scan. Scan appears in the display.

2 Press Multi-Control to turn scan play on. Scan :ON appears in the display. The first 10

seconds of each track is played.

3 When you find the desired track press Multi-Control to turn scan play off. Scan :OFF appears in the display. The track

will continue to play.

# If the display has automatically returned to the playback display, select Scan again by using Multi-Control.

Note

After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1 Use Multi-Control to select Pause. Pause appears in the display.

2 Press Multi-Control to turn pause on. Pause :ON appears in the display. Play of the

current track pauses.

# To turn pause off, press Multi-Control again.

Selecting the search method

You can switch the search method between fast forward/reverse and searching every 10 tracks.

1 Use Multi-Control to select FF/REV. FF/REV appears in the display.

# If the search method ROUGH SEARCH has been previously selected, ROUGH SEARCH will be displayed.

2 Press Multi-Control to select the search method.

Press Multi-Control until the desired search method appears in the display.

! FF/REV  Fast forward and reverse ! ROUGH SEARCH  Searching every 10

tracks

Searching every 10 tracks in the current disc

If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains a lot of tracks, you can roughly search for the track you want to play.

1 Select the search method ROUGH SEARCH.

Refer to Selecting the search method on this page.

2 Push and hold Multi-Control left or right to search every 10 tracks on a disc.

Built-in CD Player

Section

track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding Multi-Control left recalls the first track of the disc.

Using compression and BMX

Using the COMP (compression) and BMX functions let you adjust the sound playback quality of the CD player. Each of the functions have a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. BMX controls sound reverberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to.

1 Use Multi-Control to select COMP/BMX. COMP/BMX appears in the display.

2 Press Multi-Control to select your favorite setting.

Press Multi-Control repeatedly to switch between the following settings:

COMP/BMX :OFFCOMP 1COMP 2 COMP/BMX :OFFBMX1BMX2

title will have already been recorded on a CD TEXT disc.

1 Play the CD that you want to enter a title for.

2 Use Multi-Control to select disc title input display.

3 Press DISPLAY to select the desired character type.

Press DISPLAY repeatedly to switch between the following character types: Alphabet (upper case)Alphabet (lower case) European letters, such as those with accents (e.g. á, à, ä, ç)Numbers and symbols

4 Push Multi-Control up or down to select a letter of the alphabet.

Each pushing Multi-Control up will display a letter of the alphabet in A B C ... X Y Z, numbers and symbols in 1 2 3 ... @ # < order. Each pushing Multi-Control down will display a letter in the reverse order, such as Z Y X ... C B A.

English

Entering disc titles

You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed. Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 10 characters long. ! When playing a CD TEXT disc, you cannot

switch to disc title input display. The disc

5 Push Multi-Control right to move the cursor to the next character position.

When the letter you want is displayed, push Multi-Control right to move the cursor to the next position and then select the next letter. Push Multi-Control left to move backwards in the display.

6 Move the cursor to the last position by pushing Multi-Control right after entering the title.

When you push Multi-Control right one more time, the entered title is stored in memory.

Section

Built-in CD Player

7 Press BAND to return to the playback display.

Notes

! Titles remain in memory, even after the disc

has been removed from the unit, and are recalled when the disc is reinserted.

! After data for 48 discs has been stored in

memory, data for a new disc will overwrite the oldest one.

! If you connect a multi-CD player, you can

input disc titles for up to 100 discs.

Using CD TEXT functions

Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artists name and playback time and are called CD TEXT discs. Only these specially encoded CD TEXT discs support the functions listed below.

Displaying titles on CD TEXT discs

You can display the title of any disc that has had a disc title entered.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: track title : disc title and : disc artist

name



track artist name and

# If specific information has not been recorded on a CD TEXT disc, title or name is not displayed.

: disc artist name and : track title

: track title and : track artist name :

: track title

Scrolling titles in the display

This unit can display the first 17 letters of disc title, disc artist name, track title and track artist name. When the text information is longer than 17 letters, you can scroll the display as follows.

% Press DISPLAY and hold until the title begins to scroll through the display.

The titles scroll.

Note

When Ever Scroll is set to ON at the initial setting, CD text information scrolls continuously in the display. If you want to display the first 17 characters of text information temporarily and scroll from the beginning, press and hold DISPLAY. About Ever Scroll, refer to Switching the Ever Scroll on page 52.

Selecting tracks from the track title list

Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back.

1 Press LIST to switch to the track title list mode.

2 Use Multi-Control to select the desired track title.

Turn to change the track title; press to play.

# You can also change the track title by pushing Multi-Control up or down. # If you do not operate the list within about 8 seconds, the track title list mode is cancelled automatically.

MP3/WMA/WAV Player

Section

Playing MP3/WMA/WAV

These are the basic steps necessary to play an MP3/WMA/WAV with your built-in CD player. More advanced MP3/WMA/WAV operation is explained starting on the next page.

1 MP3/WMA/WAV indicator

Shows the type of file currently playing.

2 Folder number indicator

Shows the number of folder currently playing.

3 Track number indicator

Shows the track (file) currently playing.

4 File name indicator

Shows the name of file currently playing.

5 Play time indicator

Shows the elapsed playing time of the current track (file).

1 Press SOURCE to select the built-in CD player.

Press SOURCE until you see Compact Disc displayed.

# If no disc is loaded in the unit, you cannot select Compact Disc (built-in CD player). Insert a disc in the unit. (Refer to page 12.)

2 Push Multi-Control up or down to select a folder.

# You cannot select a folder that does not have an MP3/WMA/WAV file recorded in it. # To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

3 To perform fast forward or reverse, push and hold Multi-Control left or right.

# This is fast forward and reverse operation only for the file being played. This operation is canceled when the previous or next file is reached. # If you select ROUGH SEARCH, pushing and holding Multi-Control left or right enables you to search every 10 tracks in the current folder. (Refer to Selecting the search method on page 26.)

4 To skip back or forward to another track, push Multi-Control left or right.

Pushing Multi-Control right skips to the start of the next track. Pushing Multi-Control left once skips to the start of the current track. Pushing again will skip to the previous track.

Notes

! When playing discs with MP3/WMA/WAV files

and audio data (CD-DA) such as CD-EXTRA and MIXED-MODE CDs, both types can be played only by switching mode between MP3/ WMA/WAVand CD-DA with BAND.

! If you have switched between playback of

MP3/WMA/WAV files and audio data (CD-DA), playback starts at the first track on the disc.

! The built-in CD player can play back an MP3/

WMA/WAV file recorded on CD-ROM. (Refer to page 57 for files that can be played back.)

! Playback is carried out in order of file number.

Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)

English

Section

MP3/WMA/WAV Player

! When playing back files recorded as VBR

(variable bit rate) files, the play time will not be correctly displayed if fast forward or reverse operations are used.

! If the inserted disc contains no files that can

be played back, No Audio is displayed.

! If the inserted disc contains WMA files that

are protected by digital rights management (DRM) , TRK SKIPPED is displayed while the protected file is skipped.

! If all the files on the inserted disc are secured

by DRM, PROTECT is displayed.

! There is no sound on fast forward or re-

verse.

Selecting a track directly in the current folder

When using the remote control, you can select a track directly by entering the desired track number. ! You cannot operate this mode from func-

tion display.

1 Press DIRECT.

Track number input display appears.

2 Press NUMBER buttons to enter the desired track number.

# You can cancel the input number by pressing

CLEAR.

3 Press DIRECT.

The track of entered number will play.

Note

After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

Introduction of advanced built-in CD player (MP3/ WMA/WAV) operation

1 Function display

Shows the function status.

1 Press Multi-Control to display the main menu. FUNCTION and AUDIO appear on the display.

2 Use Multi-Control to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn Multi-Control to select the function.

Turn Multi-Control clockwise to switch between the functions in the following order:

Repeat (repeat play)Random (random play) Scan (scan play)Pause (pause)FF/REV (search method)Tag Read (tag display) COMP/BMX (compression and BMX)

# You can also switch between the functions in the reverse order by turning Multi-Control counterclockwise. # To return to the playback display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

MP3/WMA/WAV Player

Section

Repeating play

For MP3/WMA/WAV playback, there are three repeat play ranges: FOLDER (folder repeat), TRK (one-track repeat) and DISC (repeat all tracks).

1 Use Multi-Control to select Repeat. Repeat appears in the display.

2 Press Multi-Control to select the repeat range.

Press Multi-Control repeatedly until the desired repeat range appears in the display.

! FOLDER  Repeat the current folder ! TRK  Repeat just the current track ! DISC  Repeat all tracks

Notes

! If you select another folder during repeat play,

the repeat play range changes to DISC.

! If you perform track search or fast forward/re-

verse during TRK, the repeat play range changes to FOLDER.

! When FOLDER is selected, it is not possible to

play back a subfolder of that folder.

3 Press Multi-Control to turn random play on. Random :ON appears in the display. Tracks

will play in a random order within the previously selected FOLDER or DISC ranges.

# To turn random play off, press Multi-Control again.

Scanning folders and tracks

While you are using FOLDER, the beginning of each track in the selected folder plays for about 10 seconds. When you are using DISC, the beginning of the first track of each folder is played for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Use Multi-Control to select Scan. Scan appears in the display.

3 Press Multi-Control to turn scan play on. Scan :ON appears in the display. The first 10

seconds of each track of the current folder (or the first track of each folder) is played.

English

Playing tracks in a random order

Random play lets you play back tracks in a random order within the repeat range,

FOLDER and DISC.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Use Multi-Control to select Random. Random appears in the display.

4 When you find the desired track (or folder) press Multi-Control to turn scan play off. Scan :OFF appears in the display. The track (or

folder) will continue to play.

# If the display has automatically returned to the playback display, select Scan again by using Multi-Control.

Note

After track or folder scanning is finished, normal playback of the tracks will begin again.

Section

MP3/WMA/WAV Player

Pausing MP3/WMA/WAV playback

Pause lets you temporarily stop playback of the MP3/WMA/WAV.

1 Use Multi-Control to select Pause. Pause appears in the display.

2 Press Multi-Control to turn pause on. Pause :ON appears in the display. Play of the

current track pauses.

# To turn pause off, press Multi-Control again.

Selecting the search method

You can switch the search method between fast forward/reverse and searching every 10 tracks.

1 Use Multi-Control to select FF/REV. FF/REV appears in the display.

# If the search method ROUGH SEARCH has been previously selected, ROUGH SEARCH will be displayed.

2 Press Multi-Control to select the search method.

Press Multi-Control until the desired search method appears in the display.

! FF/REV  Fast forward and reverse ! ROUGH SEARCH  Searching every 10

tracks

a lot of tracks, you can roughly search for the track you want to play.

1 Select the search method ROUGH SEARCH.

Refer to Selecting the search method on page

20.

2 Push and hold Multi-Control left or right to search every 10 tracks on a disc.

# If a disc contains less than 10 tracks, pushing and holding Multi-Control right recalls the last track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding Multi-Control right recalls the last track of the disc. # If a disc contains less than 10 tracks, pushing and holding Multi-Control left recalls the first track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pushing and holding Multi-Control left recalls the first track of the disc.

Switching the tag display

It is possible to turn the tag display on or off, if MP3/WMA disc contains text information such as track title and artist name. ! If you turn the tag display off, time to play-

back will be shorter than when this function is turned on.

1 Use Multi-Control to select Tag Read. Tag Read appears in the display.

Searching every 10 tracks in the current disc

If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains

2 Press Multi-Control to turn tag display on. Tag Read :ON appears in the display.

# To turn tag display off, press Multi-Control again.

MP3/WMA/WAV Player

Section

Note

When you turn the tag display on, the unit returns to the beginning of the current track in order to read the text information.

Using compression and BMX

1 Use Multi-Control to select COMP. COMP appears in the display.

2 Press Multi-Control to select your favorite setting.

Press Multi-Control repeatedly to switch between the following settings:

COMP/BMX :OFFCOMP 1COMP 2 COMP/BMX :OFFBMX1BMX2

Displaying text information on MP3/WMA/WAV disc

Text information recorded on an MP3/WMA/ WAV disc can be displayed.

When playing back an MP3/ WMA disc

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

: file name : folder name and : file name :track title and :artist name : artist name and

# When playing back MP3 files recorded as VBR (variable bit rate) files, the bit rate value is not displayed even after switching to bit rate. (VBR will be displayed.) # When playing back WMA files recorded as VBR (variable bit rate) files, the average bit rate value is displayed. # When you have turned tag display off, you cannot switch to track title, artist name, album title or comment. # If specific information has not been recorded on an MP3/WMA disc, title or name is not displayed. # With some applications used to encode WMA files, album names and other text information may not be correctly displayed.

: file name and : folder name

: album title : album title and

:track title :comment and bit rate

When playing back a WAV disc

% Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

:file name :folder name and :file name sampling frequency

# If specific information has not been recorded on a WAV disc, name is not displayed. # You can only play back WAV files in the frequencies 16, 22.05, 24, 32, 44.1 and 48 kHz (LPCM), or 22.05 and 44.1 kHz (MS ADPCM). The sampling frequency shown in the display may be rounded.

:file name and :folder name

English

Section

MP3/WMA/WAV Player

Scrolling text information in the display

This unit can display the first 17 letters only of folder name, file name, track title, artist name, album title and comment. When the recorded information is longer than 17 letters, you can scroll the text to the left so that the rest of the text information can be seen.

% Press DISPLAY and hold until the text information begins to scroll through the display.

The text information scrolls.

Notes

! Unlike MP3 and WMA file format, WAV files

display only folder name and file name.

! When Ever Scroll is set to ON at the initial set-

ting, CD text information scrolls continuously in the display. If you want to display the first 17 characters of text information temporarily and scroll from the beginning, press and hold

DISPLAY. About Ever Scroll, refer to Switching the Ever Scroll on page 52.

2 Use Multi-Control to select the desired file name (or folder name).

Turn to change the name of file or folder; press to play; push right to see a list of the files (or folders) in the selected folder.

# You can also change the name of file or folder by pushing Multi-Control up or down. # To return to the previous list (the folder one level higher), push Multi-Control left. # If you do not operate the list within about 8 seconds, the file name list mode is cancelled automatically.

Selecting tracks from the file name list

File name list lets you see the list of file names (or folder names) and select one of them to playback.

1 Press LIST to switch to the file name list mode.

Names of files and folders appear in the display.

Multi-CD Player

Section

Playing a CD

You can use this unit to control a multi-CD player, which is sold separately.

These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page.

1 Disc number indicator

Shows the disc currently playing.

2 Track number indicator

Shows the track currently playing.

3 Disc title indicator

Shows the title of the currently playing disc. ! If no title has been entered for the cur-

rently playing disc, nothing is displayed.

4 Play time indicator

Shows the elapsed playing time of the current track.

1 Press SOURCE to select the multi-CD player.

Press SOURCE until you see Multi CD displayed.

2 Push Multi-Control up or down to select a disc you want to listen to.

3 To perform fast forward or reverse, push and hold Multi-Control left or right.

4 To skip back or forward to another track, push Multi-Control left or right.

Pushing Multi-Control right skips to the start of the next track. Pushing Multi-Control left once skips to the start of the current track. Pushing again will skip to the previous track.

Notes

! When the multi-CD player performs the pre-

paratory operations, Ready is displayed.

! If the multi-CD player does not operate prop-

erly, an error message such as ERROR-11 may be displayed. Refer to the multi-CD player owners manual.

! If there are no discs in the multi-CD player ma-

gazine, No Disc is displayed.

! When you select a CD TEXT disc on a CD TEXT

compatible multi-CD player, the disc and track titles automatically begin to scroll in the display. When Ever Scroll function is ON at the initial setting, the disc and track titles scroll continuously. About Ever Scroll, refer to Switching the Ever Scroll on page 52.

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number. ! You cannot operate this mode from func-

tion display.

1 Press DIRECT.

Track number input display appears.

2 Press NUMBER buttons to enter the desired track number.

# You can cancel the input number by pressing

CLEAR.

3 Press DIRECT.

The track of entered number will play.

English

Section

Multi-CD Player

Note

After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

50-disc multi-CD player

Only those functions described in this manual are supported for 50-disc multi-CD players. This unit is not designed to operate disc title list functions with a 50-disc multi-CD player. About the disc title list funtions, please refer to Selecting discs from the disc title list on page

34.

Introduction of advanced multi-CD player operation

1 Function display

Shows the function status.

1 Press Multi-Control to display the main menu. FUNCTION and AUDIO appear on the display.

2 Use Multi-Control to select FUNCTION.

Turn to change the menu option; press to select. The function name appears on the display.

3 Turn Multi-Control to select the function.

Turn Multi-Control clockwise to switch between the functions in the following order:

Repeat (repeat play)Random (random play) Scan (scan play)Pause (pause)COMP (compression and DBE)ITS Play (ITS play) ITS (ITS programming)disc title input

# You can also switch between the functions in the reverse order by turning Multi-Control counterclockwise. # To return to the playback display, press BAND.

Notes

! When playing a CD TEXT disc on a CD TEXT

compatible multi-CD player, you cannot switch to disc title input. The disc title will have already been recorded on a CD TEXT disc.

+ 169 hidden pages