Pioneer CDJ-900NXS, CDJ-900nexus User Manual 2

MULTI PLAYER MULTI REPRODUCTOR

Ӽ൭ᡞክܺᐡ

Español ϜНEnglish

CDJ

-900NXS

CDJ-900nexus

http://pioneerdj.com/support/

The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort.

El sitio de asistencia Pioneer DJ mostrado arriba ofrece las preguntas frecuentes, información del software y varios otros tipos de información y servicios que le permitirán usar su producto con mayor confort.

αРᡘұޠӒᎣEKМනᆪયණٽGBRȃ೻ᡞၦଊІөԓڐу᜹࠯ޠၦଊᇅ݉ଡ଼ȂѠᡲ்؂Р߰ޠٻң౱ࠣȄ

http://rekordbox.com/

For various types of information and services regarding rekordbox™, see the Pioneer website above.

Para varios tipos de información y servicios acerca del rekordbox™, visite el sitio web de Pioneer indicado arriba.

Ԅሰөᆎԥᜱsflpsecpy™ޠၦଊІ݉ଡ଼Ȃ፝୥ᎨпαӒᎣᆪયȄ

Read Before Use (Important)/Quick Start Guide Léalo antes de usar (Importante)/Guía de inicio rápido

ٻңࠊ፝Ꭸ᠟ȞȟİġץഁΤߟࡿࠓ

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After

CAUTION

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER PA SERVICE PERSONNEL.

you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product Name: MULTI PLAYER Model Number: CDJ-900NXS Responsible Party Name: PIONEER ELECTRONICS (USA) INC. SERVICE SUPPORT DIVISION Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A. Phone: 1-800-421-1404 URL: http://www.pioneerelectronics.com

D8-10-4*_C1_En

-SERVICEABLE

RTS INSIDE. REFER SERVICING TO QUALIFIED

CAUTION

This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007.

CLASS 1 LASER PRODUCT

D3-4-2-1-1_B1_En

D58-5-2-2a_A1_En

Information to User

Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

D8-10-2_A1_En

Operating Environment

Operating environment temperature and humidit +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).

D3-4-2-1-7c*_A2_En

Condensation

Wa (on operating parts and lenses) in the winter example, if the unit is moved from a cold place into a warm room or if the temperature in the room in which the unit is installed rises suddenly (through heating, etc.). The unit will not operate properly and will not be playable with condensation inside. Let the unit stand for 1 to 2 hours at room temperature (though this time depends on the conditions of the condensation) without turning on the power and the unit will become playable. Condensation can occur in the summer as well if the unit is exposed to the direct wind from an air move the unit to a different location

POWER-CORD CAUTION

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 5 cm at rear

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.

ter droplets (condensation) may form inside the unit

, for

. The water droplets will evaporate

-conditioner, etc. If this happens, .

CAUTION

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

D8-10-3a_A1_En

, and 5 cm at each side).

To prevent fire

S005b_A1_En

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.

WARNING

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

WARNING

To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

CAUTION

The switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

When using this product, confirm the safety information shown on the bottom of the unit.

English

S002*_A1_En

D3-4-2-1-3_A1_En

D3-4-2-1-7a_A1_En

D3-4-2-2-2a*_A1_En

D3-4-2-2-4_B1_En

D3-4-2-1-7b*_A1_En

Before you start

How to read this manual

Be sure to read both this leaflet and the Operating Instructions contained on the CD-ROM accompanying this product! Both documents include important information that you must understand before using this product.

About trademarks and registered trademarks

! Pioneer and rekordbox are trademarks or registered trademarks of

the PIONEER CORPORATION.

! Microsoft, Windows, Windows Vista and Internet Explorer are either

registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

! Adobe and Reader are either registered trademarks or trademarks

of Adobe Systems Incorporated in the United States and/or other countries.

! ASIO is a trademark of Steinberg Media Technologies GmbH. ! “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean

that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

! rekordbox music management software ! Driver software (Windows)

For details on the respective software, see the operating instructions on the CD-ROM.

 Operating environment

This CD-ROM can be used with Windows® XP, Windows Vista®, Windows® 7, Windows® 8 and Apple Mac OS X (10.8, 10.7, 10.6 and

10.5.8). Adobe Reader (Version 4.0 or later) is required to read the manuals in the CD-ROM.

 Precautions For Use

This CD-ROM is for use with a computer. It cannot be used with a DVD player, music CD player, or DJ player. Attempting to play this CD-ROM with those player can damage speakers or cause impaired hearing due to the large volume.

 License

Please agree to the “Terms of Use” indicated below before using this CD-ROM. Do not use if you are unwilling to consent to the terms of its use.

 Terms of Use

Copyright to data provided on this CD-ROM belongs to PIONEER CORPORATION. Unauthorized transfer, duplication, broadcast, public transmission, translation, sales, lending or other such matters that go beyond the scope of “personal use” or “citation” as defined by Copyright Law may be subject to punitive actions. Permission to use this CD-ROM is granted under license by PIONEER CORPORATION. Also check Software end user license agreement on page 8.

! Apple, iPad, iPod, iPod touch, iPhone, iTunes, Safari, Finder, Mac,

Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

! Android™ is a trademark of Google Inc. ! iOS is a trademark on which Cisco holds the trademark right in the

US and certain other countries.

! Wi-Fi® is a registered mark of the Wi-Fi Alliance.

About using MP3 files

This product has been licensed for nonprofit use. This product has not been licensed for commercial purposes (for profit-making use), such as broadcasting (terrestrial, satellite, cable or other types of broadcasting), streaming on the Internet, Intranet (a corporate network) or other types of networks or distributing of electronic information (online digital music distribution service). You need to acquire the corresponding licenses for such uses. For details, see http://www.mp3licensing.com.

! The names of companies and products mentioned herein are the

trademarks of their respective owners.

What’s in the box

! CD-ROM (containing rekordbox (Mac/Windows), the driver software

and the operating instructions. The rekordbox (Mac/Windows)

license key is attached to the CD-ROM.) ! Power cord(s) (page 2) Be sure to use the included power cord (page 2).

! Audio cable ! LAN cable ! Disc force eject pin (mounted on bottom of product) ! Read Before Use (Important)/Quick Start Guide (this document)

About the included CD-ROM

The included CD-ROM contains the following two software programs.

 General Disclaimer

PIONEER CORPORATION does not guarantee the operation of this CD-ROM with respect to computers using any of the applicable OS. In addition, PIONEER CORPORATION is not liable for any damages incurred as a result of use of this CD-ROM and is not responsible for any compensation. If the manual in the supplied CD-ROM is not automatically opened, double-click on the CD-ROM icon to display the content and then open the PDF file.

Usable media

About discs

Music CDs (CD-DA) as well as music files (MP3/AAC/WAV/AIFF) stored on CD-ROMs (CD-R/CD-RW) can be played on this unit. ! 8 cm discs cannot be played.

About USB devices

This unit supports USB mass storage class USB devices (external hard disks, portable flash memory devices, digital audio players, etc.).

Supported file systems

Tracks managed by rekordbox (iOS/Android) can be played by connecting the mobile device on which rekordbox (iOS/Android) is installed via USB. For supported devices, see the Pioneer DJ website (http://pioneerdj.com/support/). For instructions on rekordbox (iOS/Android), see the rekordbox (iOS/Android) user’s manual. ! Disc identification information as well as such information as cue

points, loop points and hot cues can be stored on USB devices.

The CDJ-900NXS does not include a hot cue function, so hot cues

cannot be used on the CDJ-900NXS.

! Depending on the USB device you are using, you may not achieve

the expected performance.

! There is no guarantee that all USB devices will operate on this unit.

For details, see this product’s operating instructions on the CD-ROM.

FAT16, FAT32 and HFS+ (NTFS is not supported.)

Connections

T M

BEAT DIVIDE

4-B

3/4

1/3

1/2

1/4

1/8

USB STOP

To power outlet

! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. ! Refer to the operating instructions for the component to be connected. ! Connect the power cord after all the connections between devices have been completed. ! Be sure to use the included power cord (page 2).

! When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable. ! Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.

Basic style

Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer. ! For instructions on operating rekordbox, see rekordbox (Mac/Windows)’s operating instructions. The rekordbox (Mac/Windows) operating instruc-

tions can be viewed from the rekordbox (Mac/Windows) [Help] menu.

! Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK

connections.

! A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or

greater. Some switching hubs may not operate properly.

A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for

all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.

PRO DJ LINK (USB Export)

! rekordbox music files and data can be exchanged with this unit using a memory device (flash memory, hard disk, etc.), eliminating the need to take

a computer into the DJ booth. Such information as playlists, cues, loops and hot cues set in advance with rekordbox can be used for playback.

The CDJ-900NXS does not include a hot cue function, so hot cues cannot be used on the CDJ-900NXS.

English

rekordbox

Computer

Mobile device on which rekordbox is installed

USB device on which rekordbox data is recorded

Switching hub

LAN cable

Audio cable

DJ player DJ mixer

LAN cable

Audio cable

DIGITAL OUT

AUDIO OUT

NTROL

AC IN

LINK

CONTROL

Rear panel

Power cord

Cautions

To use rekordbox’s music file management functions to their maximum, set the channel of the audio or coaxial digital input cable connected to the mixer and the player number to the same number. If the player number is different, change the [PLAYER No.] setting on the [UTILITY] screen.

= For instructions on changing the settings on the [UTILITY] screen, see this product’s operating instructions. ! When a storage device is connected to this unit, [PLAYER No.] is displayed in gray and cannot be changed. Disconnect the storage device or LAN

cable to turn the link off, then change the setting.

Operation

Turning the power on

1 Make all the connections, then plug the power cord into a power outlet.

= Connections (p.5)

2 Press the [u] switch.

This unit’s indicators light and the power turns on.

Inserting discs

! This unit is a one-disc player. Do not insert multiple disc. ! Do not force discs into the disc insertion slot when this unit’s power

is off. Doing so could damage the disc and lead to malfunction of

this unit. ! When the disc is being drawn in or ejected, do not apply any force

to the disc in the direction opposite its movement. Doing so could

damage the disc or this unit.

1 Press the [u] switch to turn this unit’s power on.

2 Insert the disc horizontally into the disc insertion slot, with the printed surface facing up.

Playback starts after the medium’s information has been read. ! When a disc containing music files recorded with a hierarchical

structure is loaded, playback starts from the tracks in the uppermost

layer. ! When auto cue is turned on, the disc pauses at the audio start posi-

tion. In this case, press the [PLAY/PAUSEf] to start playback.

= For details on the auto cue function, see this product’s operating

instructions.

! When a USB device that has previously been connected to this unit

or a to Pioneer DJ player is connected and a disc is inserted, the

number of discs for which disc information is stored is displayed for

several seconds on the main unit display.

! Press the rotary selector to move to a lower level in the folder. Press

the [BACK] button to return to the level above.

! When the [BACK] button is pressed for over 1 second or the medium

button for the medium being browsed is pressed, the display moves to the topmost level.

! Tracks in the currently playing track’s category/folder of can also be

selected using the [TRACK SEARCH o, p] buttons.

4 Select the track and press the rotary selector.

When the track is loaded, the screen switches to the normal playback screen. The medium on which the track is loaded flashes.

= For details on the normal playback screen, see this product’s

operating instructions.

! When [EJECT/LOAD LOCK] on the [UTILITY] menu is set to [LOCK],

it is not possible to load other tracks during playback. Either set [EJECT/LOAD LOCK] to [UNLOCK] or press the [PLAY/PAUSEf] button to pause, then load the track.

! When a track has been loaded while pausing, press the

[PLAY/PAUSEf] button to start playback.

! When auto cue is turned on, the disc pauses at the audio start posi-

tion. In this case, press the [PLAY/PAUSEf] to start playback. = For details on the auto cue function, see this product’s operating

instructions.

For other operations, see this product’s operating instructions on the CD-ROM.

Connecting USB devices

1 Press the [u] switch to turn this unit’s power on.

2 Connect the USB device to the USB device insertion slot.

Playing media connected to or inserted in this unit

1 Load the medium in this unit.

= Inserting discs (p.6)

= Connecting USB devices (p.6)

2 Press one of the medium buttons ([DISC] or [USB]).

The tracks or folders are displayed on a list. The medium whose contents are displayed on the main unit display can be switched. [DISC] button: Displays the contents on the inserted disc. [USB] button: Displays the contents of the connected USB or mobile device. ! If the rekordbox library information was written on the USB device,

the rekordbox library is displayed.

= For instructions on browsing the rekordbox library, see this prod-

uct’s operating instructions.

3 Turn the rotary selector.

Move the cursor and select the item.

Additional information

Troubleshooting

! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points

below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

! This unit may not operate properly due to such external causes as static electricity. If this happens, normal operation can sometimes be restored by

turning the power off, waiting for the disc to stop completely, then turning the power back on.

Problem Check Remedy

Disc cannot be ejected. Is [EJECT/LOAD LOCK] set to [LOCK]?

—

Playback does not start when disc is loaded.

File cannot be played. Is the file copyright-protected (by DRM)? Copyright-protected files cannot be played. No sound is produced, or sound is

distorted or noisy.

Loud noise is produced or playback stops when a certain disc is played.

File information is not properly displayed.

Track search operation takes too long. Is the auto cue function activated? Track searching may take some time when there are long silent sections

Back cue function does not work. Is a cue point set? Set a cue point. Loop play function does not work. Are loop points set? Set loop points. Settings are not stored in the memory. Has the power been turned off directly after

USB device is not recognized. Is the USB device properly connected? Connect the device securely (all the way in).

Cue points or loops are not stored on a USB device.

Cue or loop points of tracks recorded on USB devices are not displayed.

Playback does not start immediately after pressing the button to reloop or play in reverse.

The playing address display is not displayed in the remaining time mode.

Is the disc or file playable? See Usable media on page 4. Is the auto cue function activated? Press [AUTO CUE] for at least 1 second to turn cancel the auto cue function.

Are you operating the connected DJ mixer properly?

Is this unit placed near a TV? Turn the TV’s power off or install this unit and TV away from each other. Is the disc scratched? Scratched discs may not play. Is the disc dirty? Wipe the dirt off the disc. Is [LANGUAGE] properly set? Set [LANGUAGE] to the proper language. Is the information recorded in a language not sup-

ported by this unit?

— If track searching is not possible within 10 seconds, a cue point is set at the

changing the setting?

Is the USB device connected via a USB hub? USB hubs cannot be used. Is the USB device supported by this unit? This player only supports USB mass storage class devices.

Is the file format supported by this unit? Check the file format of the connected USB device. For the file formats sup-

— Turn the power off then back on. Are you trying to store more points than the limit? A maximum of 100 cue or loop points can be stored on USB devices per disc. For

Is the USB device write-protected? If the USB device is write-protected, [USB FULL] is displayed and the points

Is there sufficient free space on the USB device? If there is not enough free space on the USB device, [USB FULL] is displayed

Was the USB device properly stopped before it was disconnected the last time?

Is the quantize function on? When the quantize function is on, playback starts from the nearest beat position

— When playing files recorded in VBR, it may happen that the set cannot detect the

Press the [PLAY/PAUSEf] button to set the pause mode, then press the [DISC EJECTh] button.

Set [EJECT/LOAD LOCK] at [UTILITY] to [UNLOCK], then press the [DISC EJECTh] button.

If the [DISC EJECTh] button does not work, insert the pin into the disc force eject hole to eject the disc.

Check the operation of the DJ mixer.

When creating files using DJ software, etc., record the information in a language supported by this unit.

between tracks.

beginning of the track.

After changing settings, wait at least 10 seconds before turning the power off.

This player supports portable flash memory and digital audio playback devices.

ported by this unit, see About USB devices on page 4.

mediums other than discs, a maximum of 10 points can be stored per track. If you try to store more points than the limit, [CUE/LOOPPOINT FULL] is displayed and the points cannot be stored. In this case, delete some points before storing new ones.

cannot be stored. Disable the write-protection then store the cue or loop points again.

and the points cannot be stored. Free up some space then store the cue or loop points again.

Points may not be displayed if the SD memory card/USB device is removed without performing the proper stopping procedure or if this unit’s power is turned off. Check that the USB indicator has turned completely off before disconnecting the USB device and turning this unit’s power off.

at the time the button is pressed. If you want the operation to be performed the instant the button is pressed, turn the quantize function off.

length of the track immediately and that some time is required for the playing address display to appear.

English

Problem Check Remedy

Time is required to read USB devices (flash memory drives and hard discs).

Library browsing is not possible. Is a medium on which library information is

[HISTORY] is not displayed. Is a USB device loaded? The [HISTORY] function can only be used for DJ players on which a USB device

Nothing is displayed. Is the auto standby function activated? This unit is shipped with the auto standby function set to on. If you do not want

The scale is not displayed. Is the track over 15 minutes long? The scale is not displayed for tracks whose playing time is over 15 minutes. PRO DJ LINK does not work well. Are the player numbers properly set? Set [PLAYER No.] to [AUTO] or to a number different from the number currently

Is there a large number of folders or files recorded on the USB device?

Are files other than music files stored on the USB device?

recorded loaded?

Is the LAN cable properly connected? Connect the LAN cable properly to the [LINK] terminal. Is the switching hub’s power turned on? Turn the switching hub’s power on. Is an unnecessary device connected to the switch-

ing hub?

When there are many folders or files, some time may be required for loading.

When files other than music files are stored in folders, time is required to read them as well. Do not store files or folders other than music files on the USB device.

The library browse mode is only set when media on which library information is recorded are loaded. When a medium on which no library information is recorded is loaded, the folder browse mode is set.

is loaded.

to use the auto standby function, set [AUTO STANDBY] on the [UTILITY] menu to [OFF].

set.

Disconnect the unnecessary device from the switching hub.

Error messages

When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase or a nearby Pioneer service station.

Error code Error type Description of error Cause and action

E-7201 E-8301 E-8302

E-8303

E-8304 E-8305

E-9101

CANNOT READ DISC

CANNOT PLAY TRACK(****)

CANNOT PLAY TRACK

UNSUPPORTED FILE FORMAT

MECHANICAL TIMEOUT

TOC data cannot be read. Disc that cannot be played normally is loaded.

Track data (files) on the disc or USB device cannot be read properly.

Music files that cannot be played normally are loaded.

Mechanical error (time out) during loading or ejecting of disc.

! Disc is cracked.dReplace the disc. ! Disc is dirty.dClean the disc. ! If operation is normal with other discs, the problem is with that

disc.

! The track data (file) may be corrupt. dCheck whether the track

(file) can be played on another player, etc., capable of playing the same formats as this unit.

Format is wrong.dReplace with music files in the proper format.

Displayed when mechanism operation is not completed within the specified time.

Software end user license agreement

This Software End User License Agreement (“Agreement”) is between you (both the individual installing the Program and any single legal entity for which the individual is acting) (“You” or “Your”) and PIONEER CORPORATION (“Pioneer”). TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT. PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS. WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT OR UNINSTALL IT, AS APPLICABLE.

1 DEFINITIONS

1 “Documentation” means written documentation, specifications

and help content made generally available by Pioneer to aid in installing and using the Program.

2 “Program” means all or any part of Pioneer’s software licensed to

You by Pioneer under this Agreement.

2 PROGRAM LICENSE

1 Limited License. Subject to this Agreement’s restrictions,

Pioneer grants to You a limited, non-exclusive, non-transferable, license (without the right to sublicense): a To install a single copy of the Program in Your computer or

mobile device, to use the Program only for Your personal purpose complying with this Agreement and the Documentation (“Authorized Use”);

To use the Documentation in support of Your Authorized Use; and

c To make one copy of the Program solely for backup pur-

poses, provided that all titles and trademark, copyright and restricted rights notices are reproduced on the copy.

2 Restrictions. You will not copy or use the Program or

Documentation except as expressly permitted by this Agreement. You will not transfer, sublicense, rent, lease or lend the Program, or use it for third-party training, commercial time-sharing or service bureau use. You will not Yourself or through any third party modify, reverse engineer, disassemble or decompile the Program, except to the extent expressly permitted by applicable law, and then only after You have notified Pioneer in writing of Your intended activities.

3 Ownership. Pioneer or its licensor retains all right, title and

interest in and to all patent, copyright, trademark, trade secret and other intellectual property rights in the Program and Documentation, and any derivative works thereof. You do not acquire any other rights, express or implied, beyond the limited license set forth in this Agreement.

4 No Support. Pioneer has no obligation to provide support,

maintenance, upgrades, modifications or new releases for the Program or Documentation under this Agreement.

3 WARRANTY DISCLAIMER

THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS” WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST EXTENT PERMISSIBLE BY LAW, PIONEER EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND DOCUMENTATION, WHETHER EXPRESS, IMPLIED, STATUTORY, OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF DEALING OR USAGE OF TRADE, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, ACCURACY, TITLE OR NON-INFRINGEMENT.

4 EXPORT CONTROL AND COMPLIANCE WITH LAWS AND REGULATIONS

You may not use or otherwise export or re-export the Program except as authorized by United States law and the laws of the jurisdiction in which the Program was obtained. In particular, but without limitation, the Program may not be exported or re-exported (a) into any U.S.-embargoed countries or (b) to anyone on the U.S. Treasury Department's Specially Designated Nationals List or the U.S. Department of Commerce Denied Persons List or Entity List. By using the Program, you represent and warrant that you are not located in any such country or on any such list. You also agree that you will not use the Program for any purposes prohibited by United States law, including, without limitation, the development, design, manufacture, or production of nuclear, missile, or chemical or biological weapons.

5 U.S. GOVERNMENT RESTRICTED RIGHTS

The Program and Documentations are “commercial computer software” and “commercial computer software documentation” as those terms are defined in 48 C.F.R. §252.227-7014 (a) (1) (2007) and 252.227-7014 (a) (5) (2007). The U.S. Government’s rights with respect to the Program and Documentations are limited by this license pursuant to 48 C.F.R. §

12.212 (Computer software) (1995) and 48 C.F.R. §12.211 (Technical data) (1995) and/or 48 C.F.R. §227.7202-3, as applicable. As such, the Program and Documentations are being licensed to the U.S. Government end users: (a) only as “commercial items” as that term is defined in 48 C.F.R.

§2.101 generally and as incorporated in DFAR 212.102; and (b) with only those limited rights as are granted to the public pursuant to this license. Under no circumstance will the U.S. Government or its end users be granted any greater rights than we grant to other users, as provided for in this license. Manufacturer is Pioneer Corporation, 1-1 Shin-Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa-Ken, 212-0031 Japan

6 DAMAGES AND REMEDIES FOR BREACH

You agree that any breach of this Agreement’s restrictions would cause Pioneer irreparable harm for which money damages alone would be inadequate. In addition to damages and any other remedies to which Pioneer may be entitled, You agree that Pioneer may seek injunctive relief to prevent the actual, threatened or continued breach of this Agreement.

7 TERMINATION

Pioneer may terminate this Agreement at any time upon Your breach of any provision. If this Agreement is terminated, You will stop using the Program, permanently delete it from your computer or mobile device where it resides, and destroy all copies of the Program and Documentation in Your possession, confirming to Pioneer in writing that You have done so. Sections 2.2, 2.3, 2.4, 3, 4, 5, 6, 7 and 8 will continue in effect after this Agreement’s termination.

8 GENERAL TERMS

1 Limitation of Liability. In no event will Pioneer or its subsidiaries

be liable in connection with this Agreement or its subject matter, under any theory of liability, for any indirect, incidental, special, consequential or punitive damages, or damages for lost profits, revenue, business, savings, data, use, or cost of substitute procurement, even if advised of the possibility of such damages or if such damages are foreseeable. In no event will Pioneer’s liability for all damages exceed the amounts actually paid by You to Pioneer or its subsidiaries for the Program. The parties acknowledge that the liability limits and risk allocation in this Agreement are reflected in the Program price and are essential elements of the bargain between the parties, without which Pioneer would not have provided the Program or entered into this Agreement.

2 The limitations or exclusions of warranties and liability contained

in this Agreement do not affect or prejudice Your statutory rights as consumer and shall apply to You only to the extent such limitations or exclusions are permitted under the laws of the jurisdiction where You are located.

3 Severability and Waiver. If any provision of this Agreement is held

to be illegal, invalid or otherwise unenforceable, that provision will be enforced to the extent possible or, if incapable of enforcement, deemed to be severed and deleted from this Agreement, and the remainder will continue in full force and effect. The waiver by either party of any default or breach of this Agreement will not waive any other or subsequent default or breach.

4 No Assignment. You may not assign, sell, transfer, delegate or

otherwise dispose of this Agreement or any rights or obligations under it, whether voluntarily or involuntarily, by operation of law or otherwise, without Pioneer’s prior written consent. Any

purported assignment, transfer or delegation by You will be null and void. Subject to the foregoing, this Agreement will be binding upon and will inure to the benefit of the parties and their respective successors and assigns.

5 Entire Agreement. This Agreement constitutes the entire agree-

ment between the parties and supersedes all prior or contemporaneous agreements or representations, whether written or oral, concerning its subject matter. This Agreement may not be modified or amended without Pioneer’s prior and express written consent, and no other act, document, usage or custom will be deemed to amend or modify this Agreement.

6 You agree that this Agreement shall be governed and construed

by and under the laws of Japan.

Cautions on copyrights

rekordbox restricts playback and duplication of copyright-protected music contents. ! When coded data, etc., for protecting the copyright is embedded in

the music contents, it may not be possible to operate the program normally.

! When rekordbox detects that coded data, etc., for protecting the

reading, etc.) may stop. Recordings you have made are for your personal enjoyment and according to copyright laws may not be used without the consent of the copyright holder. ! Music recorded from CDs, etc., is protected by the copyright laws of

individual countries and by international treaties. It is the full respon-

sibility of the person who has recorded the music to ensure that it is

used legally. ! When handling music downloaded from the Internet, etc., it is the

full responsibility of the person who has downloaded the music to

ensure that it is used in accordance with the contract concluded

with the download site.

Specifications

Power requirements .................................... AC 110 V to 240 V, 50 Hz/60 Hz

Power consumption ............................................................................... 33 W

Power consumption (standby) ............................................................. 0.4 W

Main unit weight ................................................................................... 4.3 kg

Max. external dimensions ....

Tolerable operating temperature ........................................ +5 °C to +35 °C

Tolerable operating humidity ...................... 5 % to 85 % (no condensation)

Analog audio output (AUDIO OUT L/R)

Output terminals ...................................................................... RCA terminal

Output Level .........................................................................2.0 Vrms (1 kHz)

Frequency response................................................................ 4 Hz to 20 kHz

S/N ratio ............................................................................................... 115 dB

Total harmonic distortion ..................................................................0.003 %

Digital audio output (DIGITAL OUT)

Output terminals ...................................................................... RCA terminal

Output type ............................................................... Coaxial digital (S/PDIF)

Output level ............................................................................ 0.5 Vp-p (75 W)

Output format .............................................................. 44.1 kHz, 24 bit/16 bit

USB downstream section (USB)

Port .......................................................................................................Type A

Power supply ........................................................................ 5 V/2.1 A or less

USB upstream section (USB)

Port .......................................................................................................Type B

LAN (PRO DJ LINK)

Rating .......................................................................................... 100Base-TX

Control output (CONTROL)

Port .................................................................................................. Mini-jack

Main display

Display type ...........................Active matrix TFT liquid crystal display (LCD)

Supported languages .............................................................. 18 languages

— The specifications and design of this product are subject to

change without notice.

320 mm (W) × 105.5 mm (H) × 401.8 mm (D)

English

+ 19 hidden pages