Phonic USBR-1 User manual

Phonic USBR-1 User manual

USBR-1

User's Manual

Manual del Usuario

USBR-1

<![if ! IE]>

<![endif]>English

<![if ! IE]>

<![endif]>Español

USB Recorder/Player for Safari series

products

Grabador /reproductor USB para los productos de serie Safari

Safari USB /

 

 

ENGLISH

.....................................I

ESPAÑOL .....................................

II

.....................................

III

V1 04/24/2012

USER'S MANUAL

CONTENTS

 

INTRODUCTION......................................................................

1

FEATURES...............................................................................

1

CONTROLS...........................................................................

2

O P E R AT I O N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

INSTALLATION...................................................

2

SPECIFICATIONS...................................................................

2

Phonic preserves the right to improve or alter any information within this document without prior notice.

<![if ! IE]>

<![endif]>English

USBR-1

1

<![if ! IE]>

<![endif]>English

IMPORTANT SAFETY INSTRUCTIONS

The apparatus shall not be exposed to dripping or splashing and that no objects

 

 

 

with liquids, such as vases,

 

 

 

 

shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

Warning: the user shall not place this apparatus in the area during the operation so that the mains switch can be easily accessible.

1.Read these instructions before operating this apparatus.

2.Keep these instructions for future reference.

3.Heed all warnings to ensure safe operation.

4.Follow all instructions provided in this document.

5.Do not use this apparatus near water or in locations where condensation may occur.

6.Clean only with dry cloth. Do not use aerosol or liquid cleaners. Unplug this apparatus before cleaning.

7.Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including .

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or

table by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tipover.

13.Unplug this apparatus during lighting storms or when unused for long periods of time.

14.Refer all servicing to service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: To reduce the risk of or electric shock, do not expose this apparatus to rain or moisture.

CAUTION: Use of controls or adjustments or performance of procedures other than those may result in hazardous radiation exposure.

INTRODUCTION

Congratulations on your purchase of Phonic’s USBR-1 – the optional and user-installable USB Recorder/Player for Safari series products. By installing the USBR-1, user are able to playback MP3 and WMA files directly from your USB 2.0 flash drives and record the mixed master output signal directly from Safari series products. Onboard recordings are made in 16-bit/44.1 kHz resolution with the bit-rate selectable between 128 k and 192 k for high quality MP3 recordings. Full files properties will be shown on the screen of USBR-

1 during playback and recording. With easy and reliable onboard recording and playback, the USBR-1 improves the already incredible all-in-one sound solution.

FEATURES

● MP3 and WMAfiles playback support from USB 2.0 flash drives

●Files properties display on screen includes files type, bit-rate, status, time and track details

4 repeat modes available for playback

Record directly to USB 2.0 flash drives

128 k and 192 k (default) bit-rate selectable for MP3 recording

CONTROLS

5

6

1

3

2

4

7

1. Record Button :

Push this button to initiate recording.

2. Play/Pause Button :

Push this button to begin playback and again to pause. This button is also used to pause and begin recording. This button is also used as an ‘enter’ button when navigating menus.

3. Reverse/Cue Buttons :

Push either of these buttons to skip to the previous track (rev) or to cue the next track (cue). Hold either of them down to fastforward (cue) or reverse (rev) through the currently playing track.

These buttons also allow for users to scroll through menus.

4. Stop/Menu Button :

This button will stop the currently playing or recording track. Keep pushing this button will bring up the main menu where users can set repeats or delete files. This button also works as a ‘back’ or

‘cancel’ button when navigating menus.

5. USB Connector :

Connect your USB flash drives here. Flash drives can be used to record to or for playback of MP3 or WMA files.

6. Display :

This screen will show the USBR-1’s current status and file properties.

7. Power/Volume Control :

This rotary control adjusts the outgoing signal level when playing back audio files from the USBR-1 module. It also allows you to turn the module on and off. To change the on/off status of the module, simply turn the knob clockwise to activate it. Turn it clockwise to increase the volume and counterclockwise to reduce the volume.

OPERATION

Playback of Files

After connecting a USB flash drive the USBR-1 will take a few seconds to read files on the disc. Users can then navigate either files recorded by the USBR-1 (“Recorded”) or their own MP3 or WMAfiles (“Files”). Within the Files menu, directories are indicated by an “F” icon while files are indicated by a musical note. Press Play/Pause to play a track.

Playback Display

During playback the screen will show the following properties: File Type (MP3 or WMA), Bit-Rate, Status (Play or Pause),Time (Minutes and Seconds) and Track Details (Name, Artist and Album).

Repeat Mode

To activate repeat for playback, push and hold the Stop/Menu button and select the Repeat option. There are four repeat options available: No Repeat, Repeat One, RepeatAll or Repeat Directory.

Recording an MP3

Push the Record button to start recording. Recording will begin in pause mode. Push the Play/Pause button to begin recording. Push the Stop/Menu button to finalize the recording. Do not remove your USB media when the screen displays “READING” as the USBR-1 is writing your file to the USB drive. Files will be recorded in MP3 format at 192 kbps bit-rate by default.

<![if ! IE]>

<![endif]>English

USBR-1

1

<![if ! IE]>

<![endif]>English

Changing to Recording Bit-rate

Push and hold the Record button for 5 to 6 seconds to enter the

Bit-rate menu. When you do so, the two available bit-rate will appear on screen: 128 kbps and 192 kbps. Push the record button again to swap the bit-rate.

Deleting a File

Whenever a file is highlighted users can push and hold the Stop/ Menu button for 4 seconds to access the menu. Use the cue button to scroll down to “DELETE” and push the Play/Pause button to accept. Press the Play/Pause button again to confirm deletion or the Stop/Menu button to decline.

Installation of Safari CD/USB or USBR-1

We recommend that an authorized Phonic repair facility or dealer/ distributor carryout the steps below:

1.Remove all power cables and turn the Safari off.

2.Unscrew the protective faceplate on the Safari and remove it.

3.Find the cables taped just within the hole left after removing the faceplate

4.Connect cables to the connectors at the rear of the optional player

5.Insert the player into the Safari and screw into place using the screws removed from the protective faceplate

Specifications

 

USBR-1

 

 

Playback file support

MP3 / WMA

Playback bit-rate

8 ~ 384 kbps

Frequency response

20Hz ~ 20,000Hz

Recording format

MP3

Recording bit-rate

128 kbp/s , 192 kbp/s

Recording sample rate

44.1 kHz

2 USBR-1

Loading...
+ 11 hidden pages