PHONIC AM120 MKII, AM220 User Manual

AM120 MKII/AM220

COMPACT MIXERS MIXERS COMPACTAS

小型调音台

AM220

User’s Manual

Manual del Usuario

使用手册

English / Español / 简体中文

AM120 MKII/AM220

COMPACT MIXERS MIXERS COMPACTAS

小型调音台

CONTENTS CONTENIDO

INTRODUCTION........................4

GETTING STARTED..................4

CHANNEL SETUP......................4

MAKING CONNECTIONS..........5

CONTROLS AND SETTINGS....7

SPECIFICATIONS......................9

APPLICATIONS........................22

DIMENSIONS...........................24

BLOCK DIAGRAMS..................25

INTRODUCCIÓN 11

INICIANDO 11

CONFIGURACIÓN DE CANAL 11

HACIENDO CONEXIONES 12

CONTROLES Y SETEOS 14

ESPECIFICACIONES 16

APLICACIONES 22

DIMENSIONES 24

DIAGRAMAS DE BLOQUE 25

简介…………….........…18

开始设定…….…….……18

声道设置……….….……18

连接操作…….…….……18

控制和设置….............…19

规格………......…………21

应用………......…………22

尺寸………......…………24

方块图………...…………25

Phonic preserves the right to improve or alter any information within this document without prior notice

Phonic se reserva el derecho de mejorar o alterar cualquier información provista dentro de este documento sin previo aviso

PHONIC保留不预先通知便可改变或更新本文件权利

V1.0 11/14/2008

1. Read these instructions before operating this apparatus.

2. Keep these instructions for future reference.

3. Heed all warnings to ensure safe operation.

4. Follow all instructions provided in this document.

5. Do not use this apparatus near water or in locations where condensation may occur.

6. Clean only with dry cloth. Do not use aerosol or liquid cleaners. Unplug this apparatus before cleaning.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover.

13. Unplug this apparatus during lighting storms or when unused for long periods of time.

14. Refer all servicing to service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product

’

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is in-

tended to alert the user to the presence of important operat-

ing and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING: To reduce the risk of or electric shock, do not expose this apparatus to rain or moisture.

CAUTION: Use of controls or adjustments or performance of procedures other than those may result in hazardous radiation exposure.

The apparatus shall not be exposed to dripping or splashing and that no objects with liquids, such as vases, shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

Warning: the user shall not place this apparatus in the area during the operation so that the mains switch can be easily accessible.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

4 AM120 MKII / AM220

4. Main L and R Outputs

These two ports will output the final unbalanced (balanced on the AM220) line level signal send from the main mix. The primary purpose of these jacks is to send the main output to external devices, which may include power amplifiers (and, in-turn, a pair of speakers), other mixers, as well as a wide range of other possible devices (equalizers, crossovers, etcetera).

5AM120 MKII / AM220

6 AM120 MKII / AM220117AM120 MKII / AM220

The AM 120 MKII

The AM 120 MKII features High and Low Frequenc

MKII.

of the AM 120 MKII mixer, however on both channels 1 and 2 of the AM220.

8 AM120 MKII / AM220

On the AM 120 MKII, this control is used to adjust the audio level of the phones feed, to be sent to the Phones output, which can be used in conjunction with headphones or, if required, as an auxiliary output. On the

AM 220, however, this output control

not

only the phones level, but the signal level sent to the Control Room output also, for use in monitoring, as side fill, or for the addition of other, external devices.

MKII features a totary-style level control, whereas the AM 220 features a 60 mm fade.

Both the AM 120 MKII and AM 220 feature a dual 4 segment level indicator.

120

MKII

AM 120 MKII

2x 1/4” TS, unbal.

9AM120 MKII / AM220

+ 19 hidden pages