Phonak Roger Focus II-312 User manual
Roger Focus II-312
User Manual
Roger Focus II-312
Your hearing device details
This user manual is valid for:
Roger Focus II-312
2020
Please ensure you use the correct type of battery in
your hearing device (zinc-air).
Your hearing device operates between 2.4 GHz–
2.48 GHz frequency range.Hearing device
Model
c Roger Focus II-312
Battery size
312
3
Contents
Your hearing device have been developed by
Phonak – the world leader in hearing solutions based
in Zurich, Switzerland.
These premium products are the result of decades of
research and expertise and are designed to keep you
connected to the beauty of sound! We thank you for
making such a great choice and wish you many years of
listening pleasure.
Please read the user manual carefully to make sure that
you understand and get the best out of your hearing
device. For more information about features and benets,
simply contact your hearing care professional.
Phonak – life is on
www.phonak.com
4
Your hearing device
1. Quick guide
2. Parts of the hearing device
Using the hearing device
3. Left & right hearing device markings
4. On/O
5. Batteries
6. Putting on the hearing device
7. Removing the hearing device
8. Multi-function button with indicator light
9. Connectivity overview
Further information
10. Care and maintenance
11. Exchanging the earpiece
12. Service and warranty
13. Compliance information
14. Information and description of symbols
15. Troubleshooting
16. Important safety information
6
8
9
10
11
16
17
18
20
21
24
28
30
36
40
42
1. Quick guide
Left & right hearing device markings
Blue marking for left hearing device.
Red marking for right hearing device.
Changing batteries
1.
Remove the
sticker from the
new battery and
wait two minutes.
6 7
2.
Open the battery
door. For
tamperproof
battery doors
refer to chapter
5.2.
3.
Place battery in
the battery door
with the “+”
symbol facing
upwards.
On/O
OOn
For tamperproof battery door instructions
refer to chapter 5.2.
Multi-function button with indicator light
The button has several functions.
It functions as a volume control and
volume control lock.
2. Parts of the hearing device
3. Left & right hearing device
markings
The following picture shows the hearing device described
in this user manual.
There is a red or blue marking to tell you if it is a left or a
right hearing device.
Roger Focus II-312
SlimTube
Earpiece:
Dome (detachable)
Anchor
Multi-function
button with
indicator light
Battery door
Blue marking for left hearing device.
Red marking for right hearing device.
8 9
4. On/O
5. Batteries
The battery door is also the on/o switch. To open
5.1 Insert battery (standard battery doors)
tamperproof battery doors refer to chapter 5.
1.
Closed battery door =
hearing device is on.
2.
Open the
battery door.
2.
1.
Remove the sticker
from the new
battery and wait
two minutes.
Open battery door =
hearing device is o.
If the battery door is tamperproof continue to read the
important information below, and refer to specic
instructions in chapter 5.2 for inserting the battery.
If it is dicult to close the battery door: Check that
the battery is inserted correctly and the “+” symbol is
facing upwards. If the battery is not inserted correctly,
When you switch on the hearing device you may hear
a start-up melody.
10 11
the hearing device will not work and the battery door
can be damaged.
3.
Place battery in the battery
door with the “+” symbol
facing upwards.
Low power: You will hear two beeps when the battery is
low. You will have approximately 30 minutes to change
the battery. We recommend that you always have a
new battery on hand.
5.2 Insert battery with a tamperproof battery door
This hearing device can be tted with a tamperproof
battery door if needed for safety reasons (children below
36 months).
Replacement battery
Opening the battery door
This hearing device requires a size 312 zinc-air battery.
Model
Roger Focus II-312
Please ensure you use the correct type of battery in
your hearing device (zinc-air). Please also read chapter
Zinc-air
battery
size
312
Color
marking on
package
brown
IEC
code
PR41
ANSI
code
7002ZD
1.
Place the tip of the tool in
the small hole at the
bottom of the hearing
device.
2.
Use the tool as leverage
to open the battery door
by pulling the door with
the tool in the direction
of the green arrow.
16.2 for further information on product safety.
12 13
Inserting the battery Closing the battery door
The battery is only
tamperproof when the
battery door is closed
correctly. Always check
after closing, that the
battery door cannot be
opened by hand.
1.
Remove the sticker from
the new battery and wait
for 2 minutes.
14 15
2.
Place battery in the
battery door with the “+”
symbol facing upwards.
6. Putting on the hearing device
1.
Place the hearing device behind
your ear.
2.
Insert the earpiece into your
ear canal.
3.
If there is an anchor attached to
the earpiece, tuck it into the bowl of
your ear to secure your hearing
device.
7. Removing the hearing device
Pull on the bend of the
SlimTube and remove the
hearing device from behind
the ear.
16 17
Loading...