Specifications and Main Features
- Model: VR788/50
- Power Supply: AC 110 - 240V, 50/60Hz
- Power Rating: Power Consumption: Approx. 24 watts
- Operation Temperature: 41deg C (5deg C) to 104deg C (40deg C)
- Humidity: 10% to 80%
- Dimension : Approx : 400 mm (L) x 94 mm (H ) x 265 mm(P)
- Weight : 3.3 Kg approximately
- Video Output Channel : Channels 3 or 4 selected as required parameters.
- Memory: 8 user defined memories. Programmable blocks.
- Advanced Timer Programming: Up to one year in advance or make daily/weekly recordings from the unit.
- Tuner Type : NTSC
- Supported Channels for Tuner: VHF 2 - 13 UHF 14-69 CATV channels Super band JI - WW Hyper band AA - EEE Low band AS - Al Ultra band 65 - 125.
- Video Input: 1.0 + 0.2 Vp-p 75 ohms
- Video Output: 0.5 Vp-p 75 ohms
- Audio Input Level: -6 dBs 1k ohms 0dBs 0.775 Vrms.
- Audio Output Level: -5 dBs 50k ohms 0dBs 0.775 Vrms.
- Provided Accessories: Remote control RF coaxial cable R6 (SUM-3)/AA batteries for remote control Power plug adapter Backup battery - CR2025.
Frequently Asked Questions
Q: What is the power supply for the VR788 / 50?
A: The power supply is AC 110 - 240V, 50/60Hz.
Q: How do I set up the timer for recording videos?
A: You can set the timer for a maximum of 8 videos by pressing the timer button on the remote control and following the instructions shown on the screen.
Q: Is there any type of video cassette that is not compatible with this VCR?
A: This VCR works with specific video cassettes that were manufactured and proven to be effective with a two, four, six and eight hours recording and playing time VCR.
Q: Is there a way to change the video output channel?
A: The output video channels can be toggled between channel 3 and 4 by means of the channel switch that is located behind the VCR.
Q: Will S-VHS tapes be compatible with this VCR?
A: No, This VCR includes S-VHS Quasi Playback which is SQPB that lets you reproduce S-VHS recordings but in VHS quality only.
Q: Why is the VCR not powering up?
A: Check whether the power cable is plugged in a socket and whether the socket has power. Also check whether the switch on the VCR has been switched on.
User Manual
Loading...