Philips P80C528EFA-02, P80C528EBA-02 Datasheet

DATA SH EET

Product speciﬁcation File under Integrated Circuits, IC20

1997 Dec 15

INTEGRATED CIRCUITS

P83C524; P80C528; P83C528

8-bit microcontrollers

1997 Dec 15 2

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers

P83C524; P80C528;

P83C528

CONTENTS

1 FEATURES 2 GENERAL DESCRIPTION 3 QUICK REFERENCE DATA 4 ORDERING INFORMATION 5 BLOCK DIAGRAM 6 FUNCTIONAL DIAGRAM 7 PINNING INFORMATION

7.1 Pinning

7.2 Pin description 8 FUNCTIONAL DESCRIPTION

8.1 General

8.2 Instruction Set Execution 9 MEMORY ORGANIZATION

9.1 Program Memory

9.2 Internal Data Memory

9.3 Addressing 10 I/O FACILITIES 11 TIMERS/COUNTERS

11.1 Timer 0 and Timer 1

11.1.1 Timer/Counter Mode Control register (TMOD)

11.1.2 Timer/Counter Control Register (TCON)

11.2 Timer 2

11.2.1 Timer 2 Control Register (T2CON)

11.2.2 Capture Mode

11.2.3 Automatic Reload Mode

11.2.4 Baud Rate Generator Mode

11.3 Watchdog Timer T3 12 SERIAL PORT (UART)

12.1 Serial Port Control Register (SCON)

12.2 SM0 and SM1 operating modes (SCON) 13 BIT-LEVEL I2C INTERFACE

13.1 I2C Interrupt Register (S1INT)

13.2 Single-bit Data Register with I2C Auto-clock (S1BIT)

13.2.1 Reading or Writing the S1BIT SFR

13.3 Control and Status Register for the I2C-bus (S1SCS)

14 INTERRUPT SYSTEM

14.1 Interrupt Enable Register (IE)

14.2 Interrupt Priority Register (IP)

14.3 Interrupt Vectors

15 IDLE AND POWER-DOWN OPERATION

15.1 Power Control Register (PCON)

15.2 Idle Mode

15.3 Power-down Mode

15.4 Wake-up from Power-down Mode 16 OSCILLATOR CIRCUIT 17 RESET CIRCUIT

17.1 Power-on reset 18 INSTRUCTION SET 19 LIMITING VALUES 20 DC CHARACTERISTICS 21 AC CHARACTERISTICS

21.1 AC Characteristics 16 MHz version

21.2 AC Characteristics 24 MHz version 22 I2C CHARACTERISTICS (BIT-LEVEL) 23 XTAL1 CHARACTERISTICS 24 SERIAL PORT CHARACTERISTICS 25 TIMING DIAGRAMS

25.1 Timing symbol definitions 26 PACKAGE OUTLINES 27 SOLDERING

27.1 Introduction

27.2 DIP

27.2.1 Soldering by dipping or by wave

27.2.2 Repairing soldered joints

27.3 PLCC and QFP

27.3.1 Reflow soldering

27.3.2 Wave soldering

27.3.3 Repairing soldered joints 28 DEFINITIONS 29 LIFE SUPPORT APPLICATIONS 30 PURCHASE OF PHILIPS I2C COMPONENTS

1997 Dec 15 3

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

1 FEATURES

• 80C51 CPU

• 32 kbytes on-chip ROM, expandable externally to

64 kbytes Program Memory address space

• P83C524:

– 16 kbytes on-chip ROM, expandable externally from

32 kbytes to 64 kbytes Program Memory address space (address space 16 k to 32 k not usable)

• P80C528:

– ROMless version of P83C528

• P83C528:

– 32 kbytes on-chip ROM, expandable externally from

32 kbytes to 64 kbytes Program Memory address space

• EPROM versions are available: see separate data sheet

P87C524 and P87C528

• 512 bytes on-chip RAM, expandable externally to

64 kbytes Data Memory address space

• Four 8-bit I/O ports

• Full-duplex UART compatible with the standard 80C51

and the 8052

• Two standard 16-bit timer/counters

• An additional 16-bit timer (functionally equivalent to the

timer 2 of the 8052)

• On-chip Watchdog Timer (WDT) with an own oscillator

• Bit-level I2C-bus hardware serial I/O Port

• 7-source and 7-vector interrupt structure with 2 priority

levels

• Up to 3 external interrupt request inputs

• Two programmable power reduction modes (Idle and

Power-down)

• Termination of Idle mode by any interrupt, external or

WDT (watchdog) reset

• Wake-up from Power-down by external interrupt,

external or WDT reset

• ROM code protection

• XTAL frequency range: 3.5 MHz to 16 MHz and

3.5 MHz to 24 MHz

• All packaging pin-outs fully compatible to the standard

8051/8052.

2 GENERAL DESCRIPTION

The P83C524 and P83C528 single-chip 8-bit microcontrollers are manufactured in an advanced CMOS process and are derivatives of the PCB80C51 microcontroller family. These devices provide architectural enhancements that make them applicable in a variety of applications in general control systems, especially in those systems which need a large ROM and RAM capacity on chip.

The P83C524 and P83C528 contain a non-volatile 16 k × 8 respectively 32 k × 8 read-only program memory, a volatile 512 bytes × 8 read/write data memory, four 8-bit I/O ports, two 16-bit timer/event counters (identical to the timers of the 80C51), a 16-bit timer (identical to the timer 2 of the 8052), a multi-source, two-priority-level, nested interrupt structure, two serial interfaces (UART and bit-level I2C-bus), a watchdog timer (WDT) with a separate oscillator, an on-chip oscillator and timing circuits. For systems that require extra capability, the P83C524 and P83C528 can be expanded using standard TTL compatible memories and logic.

The device also functions as an arithmetic processor having facilities for both binary and BCD arithmetic plus bit-handling capabilities. The P83C524 and P83C528 have the same instruction set as the PCB80C51 which consists of over 100 instructions: 49 one-byte, 46 two-byte and 16 three-byte. With a 16 MHz crystal, 58% of the instructions are executed in 750 ns and 40% in 1.5 µs. Multiply and divide instructions require 3 µs.

1997 Dec 15 4

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

3 QUICK REFERENCE DATA

4 ORDERING INFORMATION

SYMBOL PARAMETER CONDITION MIN. MAX. UNIT

P83C524, P80C528, P83C528 (see characteristics tables for extended temperature range versions)

supply voltage range 4.5 5.5 V

supply current: operating modes 16 MHz VDD= 5.5 V, f

CLK

= 16 MHz − 33 mA

supply current: Idle mode 16 MHz VDD= 5.5 V, f

CLK

= 16 MHz − 6mA

supply current: Power-down mode 2V ≤ VPD≤ VDD max. − 100 µA

tot

total power dissipation − 1W

stg

storage temperature range −65 +150 °C

amb

operating ambient temperature range −40 +85 °C

EXTENDED

TYPE NUMBER

PACKAGE

TEMPERATURE

RANGE (°C)

FREQ.

(MHZ)

NAME DESCRIPTION VERSION

ROMless

P80C528EBP DIP40 plastic dual in-line package;

40 leads (600 mil)

SOT129-1 0 to +70 3.5 to 16 P80C528EFP −40 to +85 P80C528IBP 0 to +70 3.5 to 24 P80C528IFP −40 to +85 P80C528EBA PLCC44 plastic leaded chip carrier; 44 leads SOT187-2 0 to +70 3.5 to 16 P80C528EFA −40 to +85 P80C528IBA 0 to +70 3.5 to 24 P80C528IFA −40 to +85 P80C528EBB QFP44 plastic quad ﬂat package;

44 leads (lead length 1.3 mm); body 10 × 10 × 1.75 mm

SOT307-2 0 to +70 3.5 to 16 P80C528EFB −40 to +85 P80C528IBB 0 to +70 3.5 to 24 P80C528IFB −40 to +85

ROM

P83C524EBP DIP40 plastic dual in-line package;

40 leads (600 mil)

SOT129-1 0 to +70 3.5 to 16 P83C524EFP −40 to +85 P83C524IBP 0 to +70 3.5 to 24 P83C524IFP −40 to +85 P83C524EBA PLCC44 plastic leaded chip carrier; 44 leads SOT187-2 0 to +70 3.5 to 16 P83C524EFA −40 to +85 P83C524IBA 0 to +70 3.5 to 24 P83C524IFA −40 to +85 P83C524EBB QFP44 plastic quad ﬂat package;

44 leads (lead length 1.3 mm); body 10 × 10 × 1.75 mm

SOT307-2 0 to +70 3.5 to 16 P83C524EFB −40 to +85 P83C524IBB 0 to +70 3.5 to 24 P83C524IFB −40 to +85

1997 Dec 15 5

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

P83C528EBP DIP40 plastic dual in-line package;

40 leads (600 mil)

SOT129-1 0 to +70 3.5 to 16 P83C528EFP −40 to +85 P83C528IBP 0 to +70 3.5 to 24 P83C528IFP −40 to +85 P83C528EBA PLCC44 plastic leaded chip carrier; 44 leads SOT187-2 0 to +70 3.5 to 16 P83C528EFA −40 to +85 P83C528IBA 0 to +70 3.5 to 24 P83C528IFA −40 to +85 P83C528EBB QFP44 plastic quad ﬂat package;

44 leads (lead length 1.3 mm); body 10 × 10 × 1.75 mm

SOT307-2 0 to +70 3.5 to 16 P83C528EFB −40 to +85 P83C528IBB 0 to +70 3.5 to 24 P83C528IFB −40 to +85

EXTENDED

TYPE NUMBER

PACKAGE

TEMPERATURE

RANGE (°C)

FREQ.

(MHZ)

NAME DESCRIPTION VERSION

1997 Dec 15 6

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here in

_white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader.This text is here inThis text is here in

white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat reader. white to force landscape pages to be ...

5 BLOCK DIAGRAM

handbook, full pagewidth

PROGRAMMABLE I/O

64K-BYTE BUS

EXPANSION

CONTROL

OSCILLATOR

AND

TIMING

CPU

internal

interrupts

PROGRAM

MEMORY

(32 K x 8 ROM/

EPROM)

DATA

MEMORY

(256 x 8 RAM)

PROGRAMMABLE

SERIAL PORT

FULL DUPLEX UART

SYNCHRONOUS

SHIFT

TWO 16-BIT

TIMER/EVENT

COUNTERS

XTAL2 XTAL1

frequency reference

T0 T1

counters

external interrupts

control parallel ports,

address/data bus

and I/O pins

serial in

serial out

INT1

INT0

MBC455

DATA

MEMORY

(256 x 8 RAM)

16-BIT TIMER

WATCHDOG

TIMER

T2 T2EX

RST

BIT-LEVEL

INTERFACE

I C

AUX - RAM

RAM

shared with Port 3

SDA SCL

Fig.1 Block diagram.

PROGRAM

MEMORY

(32 Kx 8 ROM

or 16 K x 8 ROM)

P83C524 P80C528 P83C528

1997 Dec 15 7

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

6 FUNCTIONAL DIAGRAM

Fig.2 Functional diagram.

handbook, full pagewidth

Port 0

address and

data bus

address bus

Port 1

Port 2

SCL SDA

RST

XTAL1 XTAL2

ALE

PSEN

Port 3

RXD / data

TXD / clock

T0 T1

INT0 INT1

alternative

functions

P83C528

MBC454 - 1

T2 T2EX

P83C524 P80C528 P83C528

1997 Dec 15 8

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

7 PINNING INFORMATION

7.1 Pinning

Fig.3 Pin configuration DIP40 (SOT129-1).

handbook, halfpage

1 2 3 4 5 6 7 8

9 10 11 12

40 39 38 37 36 35 34 33 32 31 30 29 28

2714 15 16 17 18 19 20

T2 P1.0

T2EX P1.1

P1.2 P1.3 P1.4

P1.5 SCL P1.6 SDA P1.7

RST

RXD / data P3.0

TXD / clock P3.1

T0 P3.4 T1 P3.5

XTAL2 XTAL1

P0.0 AD0 P0.1 AD1 P0.2 AD2 P0.3 AD3 P0.4 AD4 P0.5 AD5 P0.6 AD6 P0.7 AD7

ALE

P2.7 A15 P2.6 A14 P2.5 A13 P2.4 A12 P2.3 A11 P2.2 A10 P2.1 A9 P2.0 A8

P83C528

INT0 P3.2

INT1 P3.3

WR P3.6

RD P3.7

PSEN

MBC453

P83C524 P80C528 P83C528

1997 Dec 15 9

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Fig.4 Pin configuration QFP44 (SOT307-2).

handbook, full pagewidth

7 8

9 10 11 12 13 14 15 16 17

39 38 37 36 35 34 33 32 31 30 29

P1.4

P1.3

P1.2

P1.1 / T2EX

P1.0 / T2

n.c.

P0.0 / AD0

P0.1 / AD1

P0.2 / AD2

P0.3 / AD3

P0.4 / AD4 P0.5 / AD5 P0.6 / AD6 P0.7 / AD7

n.c. ALE

P2.7 / A15 P2.6 / A14 P2.5 / A13

PSEN

P1.5

SCL / P1.6

SDA / P1.7

RST

RXD / data / P3.0

n.c.

TXD / clock / P3.1

T0 / P3.4 T1 / P3.5

INT0 / P3.2 INT1 / P3.3

XTAL2

XTAL1

n.c.

P2.0 / A8

P2.1 / A9

P2.2 / A10

P2.3 / A11

P2.4 / A12

WR / P3.6

RD / P3.7

P83C528

MBC452

1 2

9 10 11

27 26 25 24 23

P83C524 P80C528 P83C528

1997 Dec 15 10

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Fig.5 Pin configuration PLCC44 (SOT187-2).

handbook, full pagewidth

7 8 9

10 11 12 13 14 15 16 17

39 38 37 36 35 34 33 32 31 30 29

P1.4

P1.3

P1.2

P1.1 / T2EX

P1.0 / T2

n.c.

P0.0 / AD0

P0.1 / AD1

P0.2 / AD2

P0.3 / AD3

P0.4 / AD4 P0.5 / AD5 P0.6 / AD6 P0.7 / AD7

n.c. ALE

P2.7 / A15 P2.6 / A14 P2.5 / A13

PSEN

P1.5 SCL / P1.6 SDA / P1.7

RST

RXD / data / P3.0

n.c.

TXD / clock / P3.1

T0 / P3.4 T1 / P3.5

INT0 / P3.2 INT1 / P3.3

XTAL2

XTAL1

n.c.

P2.0 / A8

P2.1 / A9

P2.2 / A10

P2.3 / A11

P2.4 / A12

WR / P3.6

RD / P3.7

P83C528

MBC452

P83C524 P80C528 P83C528

1997 Dec 15 11

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

7.2 Pin description Table 1 Pin description for P83C524, P80C528 and P83C528; see note 1

SYMBOL

DESCRIPTION

SOT 129-1 SOT 187-2 SOT 307-2

P1.0−P1.7 1 to 8 2−9

(1 n.c.)

1−3, 40−44

(39 n.c.)

Port 1: 8-bit quasi-bidirectional I/O Port. Port 1 can sink/source one TTL (= 4 LSTTL) input. It can drive CMOS inputs without external pull-ups, except P1.6 and P1.7 which have open drain outputs.

Port 1 alternative functions:

T21240P1.0 Timer/event counter 2 external event counter input

(falling edge triggered)

T2EX 2 3 41 P1.1 Timer/event counter 2 capture/reload trigger or external

interrupt 2 input (falling edge triggered)

SCL 7 8 2 P1.6 I

C-bus Serial Port clock line

SDA 8 9 3 P1.7 I

C-bus Serial Port data line.

RST 9 10 4 RESET: a HIGH level on this pin for two machine cycles while the

oscillator is running, resets the device. An internal pull-down resistor permits power-on reset using only a capacitor connected to V

. After a WDT overﬂow this pin is pulled HIGH while the

internal reset signal is active.

P3.0−P3.7 10−17 11, 13−19

(12 n.c.)

5, 7−13 (6 n.c.)

Port 3: 8-bit quasi-bidirectional I/O Port with internal pull-ups. Port 3 can sink/source one TTL (= 4 LSTTL) input. It can drive

CMOS inputs without external pull-ups.

Port 3 alternative functions:

RXD/data 10 11 5 P3.0 Serial Port data input (asynchronous) or data

input/output (synchronous)

TXD/clock 11 13 7 P3.1 Serial Port data output (asynchronous) or clock output

(synchronous)

INT0 12 14 8 P3.2 external interrupt 0 or gate control input for timer/event

counter 0

INT1 13 15 9 P3.3 external interrupt 1 or gate control input for timer/event

counter 1 T0 14 16 10 P3.4 external input for timer/event counter 0 T1 15 17 11 P3.5 external input for timer/event counter 1 WR 16 18 12 P3.6 external data memory write strobe RD 17 19 13 P3.7 external data memory read strobe.

The generation or use of a Port 3 pin as an alternative function is carried out automatically by the P83C528 provided the associated Special Function Register (SFR) bit is set HIGH.

XTAL2 18 20 14 Crystal input 2: output of the inverting ampliﬁer that forms the

oscillator. This pin left open-circuit when an external oscillator clock is used (see Figures 22 and 23).

1997 Dec 15 12

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Note

1. To avoid a 'latch-up' effect at power-on, the voltage on any pin (at any time) must not be higher than VDD+0.5 V or lower than VSS−0.5 V respectively.

XTAL1 19 21 15 Crystal input 1: input to the inverting ampliﬁer that forms the

oscillator, and input to the internal clock generator. Receives the external oscillator clock signal when an external oscillator is used (see Figures 22 and 23).

20 22 16 Ground: circuit ground potential.

P2.0-P2.7 21−28 24−31

(23 n.c.)

18−25 (17 n.c.)

Port 2: 8-bit quasi-bidirectional I/O Port with internal pull-ups. During access to external memories (RAM/ROM) that use 16-bit addresses (MOVX @DPTR) Port 2 emits the high-order address byte (A8 to A15). Port 2 can sink/source one TTL (= 4 LSTTL) input. It can drive CMOS inputs without external pull-ups.

PSEN 29 32 26 Program Store Enable output: read strobe to the external

program memory via Port 0 and Port 2. It is activated twice each machine cycle during fetches from external program memory. When executing out of external program memory two activations of PSEN are skipped during each access to external data memory. PSEN is not activated (remains HIGH) during no fetches from external program memory .PSEN can sink/source 8 LSTTL inputs. It can drive CMOS inputs without external pull-ups.

ALE 30 33 27 Address Latch Enable output: latches the LOW byte of the

address during access to external memory in normal operation. It is activated every six oscillator periods except during an external data memory access. ALE can sink/source 8 LSTTL inputs. It can drive CMOS inputs without an external pull-up.

EA 31 35

(34 n.c.)29(28 n.c.)

External Access input: when during RESET, EA is held at a TTL HIGH level, the CPU executes out of the internal program ROM, provided the program counter is less than 32768. When EA is held at a TTL LOW level during RESET, the CPU executes out of external program memory via Port 0 and Port 2. EA is not allowed to ﬂoat.

P0.0-P0.7 32−39 36−43 30−37 Port 0: 8-bit open drain bidirectional I/O Port. It is also the

multiplexed low-order address and data bus during accesses to external memory (AD0 to AD7). During these accesses internal pull-ups are activated. Port 0 can sink/source 8 LSTTL inputs.

40 44 38 Power supply: +5 V power supply pin during normal operation,

Idle mode and Power-down mode.

SYMBOL

DESCRIPTION

SOT 129-1 SOT 187-2 SOT 307-2

1997 Dec 15 13

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

8 FUNCTIONAL DESCRIPTION

8.1 General

The P83C524, P80C528 and P83C528 are stand-alone high-performance microcontrollers designed for use in real time applications such as instrumentation, industrial control, medium to high-end consumer applications and specific automotive control applications.

In addition to the 80C51 standard functions, the devices provide a number of dedicated hardware functions for these applications. The P83C524 and P83C528 are control-oriented CPUs with on-chip program and data memory. They can be extended with external program memory up to 64 kbytes. They can also access up to 64 kbytes of external data memory. For systems requiring extra capability, the P83C524 and P83C528 can be expanded using standard memories and peripherals.

The P83C524, P80C528 and P83C528 have two software selectable modes of reduced activity for further power reduction: Idle and Power-down. The Idle mode freezes the CPU while allowing the RAM, timers, serial ports and interrupt system to continue functioning. The Power-down mode saves the RAM contents but freezes the oscillator causing all other chip functions to be inoperative except the WDT if it is enabled. The Power-down mode can be terminated by an external reset, a WDT overflow, and in addition, by either of the two external interrupts.

8.2 Instruction Set Execution

The P83C524, P80C528 and P83C528 use the powerful instruction set of the 80C51. Additional SFRs are incorporated to control the on-chip peripherals. The instruction set consists of 49 single-byte, 46 two-byte and 16 three-byte instructions. When using a 16 MHz oscillator, 64 instructions execute in 750 ns and 45 instructions execute in 1.5 s. Multiply and divide instructions execute in 3 µs (see Chapter 18).

9 MEMORY ORGANIZATION

The central processing unit (CPU) manipulates operands in three memory spaces; these are the 64 kbyte external data memory (of which the lower 256 bytes reside in the internal AUX-RAM), 512 byte internal data memory (consisting of 256 bytes standard RAM and 256 bytes AUX-RAM) and the 64 kbyte internal and external program memory.

9.1 Program Memory

The program memory address space of the P83C528 comprises an internal and an external memory portion. The P83C528 has 32 kbyte of program memory on-chip. The program memory can be externally expanded up to 64 kbyte. If the EA pin is held HIGH, the P83C528 executes out of the internal program memory unless the address exceeds 7FFFH. Locations 8000H through 0FFFFH are then fetched from the external program memory. If the EA pin is held LOW, the P83C528 fetches all instructions from the external program memory. Fig.6 illustrates the program memory address space.

By setting a mask programmable security bit the ROM content is protected i.e. it cannot be read out by any test mode or by any instruction in the external program memory space. The MOVC instructions are the only ones which have access to program code in the internal or external program memory. The EA input is latched during RESET and is 'don't care' after RESET. This implementation prevents reading from internal program code by switching from external program memory to internal program memory during MOVC instruction or an instruction that handles immediate data. Table 2 lists the access to the internal and external program memory by the MOVC instructions when the security bit has been set to a logical one. If the security bit has been set to a logical 0 there are no restrictions for the MOVC instructions.

Fig.6 Program Memory Address Space.

handbook, halfpage

MBC456 - 1

EXTERNAL

64 K

32768

32767

PROGRAM MEMORY

32767

EXTERNAL

(EA = 0)

INTERNAL

(EA = 1)

16383

(1)

(1) Only for P83C524.

(EA = 1)

(EA = 0)

1997 Dec 15 14

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Table 2 Internal and external program memory access with security bit set

INSTRUCTION

ACCESS TO INTERNAL

PROGRAM MEMORY

ACCESS TO EXTERNAL

PROGRAM MEMORY

MOVC in internal program memory YES YES MOVC in external program memory NO YES

9.2 Internal Data Memory

The internal data memory is divided into three physically separated parts: 256 byte of RAM, 256 byte of AUX-RAM, and a 128 byte special function area (SFR). These parts can be addressed as follows (see Table 3 and Fig.11):

• RAM 0 to 127 can be addressed directly and indirectly

as in the 80C51. Address pointers are R0 and R1 of the selected register bank.

• RAM 128 to 255 can only be addressed indirectly.

Address pointers are R0 and R1 of the selected register bank.

• AUX-RAM 0 to 255 is indirectly addressable as the

external data memory locations 0 to 255 with the MOVX instructions. Address pointers are R0 and R1 of the selected register bank and DPTR. When executing from internal program memory, an access to AUX-RAM 0 to 255 will not affect the ports P0, P2, P3.6 and P3.7.

• the SFRs can only be addressed directly in the address

range from 128 to 255.

An access to external data memory locations higher than 255 will be performed with the MOVX DPTR instructions in the same way as in the 80C51 structure, i.e. with P0 and P2 as data/address bus and P3.6 and P3.7 as write and read timing signals (see Figures 7, 8, 9 and 10). Note that the external data memory cannot be accessed with R0 and R1 as address pointer.

Fig.11 shows the internal and external data memory address space. Fig.12 shows the Special Function Register (SFR) memory map. Four 8-bit register banks occupy locations 0 through 31 in the lower RAM area. Only one of these banks may be enabled at a time. The next 16 bytes, locations 32 through 47, contain 128 directly addressable bit locations.

The stack can be located anywhere in the internal 256 byte RAM. The stack depth is only limited by the available internal RAM space of 256 bytes. All registers except the Program Counter and the four 8-bit register banks reside in the SFR address space.

Table 3 Internal data memory access

LOCATION ADDRESSED

RAM 0 to 127 DIRECT and INDIRECT RAM 128 to 255 INDIRECT only AUX-RAM 0 to 255 INDIRECT only with MOVX Special Function Register (SFR) 128 to 255 DIRECT only

1997 Dec 15 15

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Fig.7 Internal program memory execution.

a. Without a MOVX.

b. With a MOVX to the AUX-RAM (read and write).

handbook, full pagewidth

MBC458

S1 S2 S3 S4 S5 S6 S1 S2 S3 S4 S5 S6

cycle 1 cycle 2

ALE

PSEN

P0 P0 OUT

P2 P2 OUT

handbook, full pagewidth

MBC457

S1 S2 S3 S4 S5 S6 S1 S2 S3 S4 S5 S6

one machine cycle

ALE

PSEN

P0 P0 OUT

P2 P2 OUT

one machine cycle

1997 Dec 15 16

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Fig.8 Internal program memory execution (continued).

handbook, full pagewidth

MBC460

S1 S2 S3 S4 S5 S6 S1 S2 S3 S4 S5 S6

cycle 1 cycle 2

ALE

PSEN

DPL OUT

P0 OUT

P2 OUT DPH OUT

P2 OUT

DATA OUT

a. With a MOVX to the External Data Memory (read).

b. With a MOVX to the External Data Memory (write).

handbook, full pagewidth

MBC459

S1 S2 S3 S4 S5 S6 S1 S2 S3 S4 S5 S6

cycle 1 cycle 2

ALE

PSEN

DATA

DPL

OUT

P0 OUT

P2 OUT DPH OUT

P2 OUT

1997 Dec 15 17

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Fig.9 External program memory execution.

a. Without a MOVX.

b. With a MOVX to the AUX-RAM (read and write).

handbook, full pagewidth

MBC462

S1 S2 S3 S4 S5 S6 S1 S2 S3 S4 S5 S6

ALE

PSEN

P2 PCH OUT

cycle 1

cycle 2

PCH OUT ADDRH OUT PCH OUT

PCL OUT

INST

ADDRL

OUT

INST

PCL

OUT

PCH OUT PCH OUT ADDRH OUT PCH OUT

PCL OUT

INST

ADDRL

OUT

INST

PCL

OUT

DATA OUT

(read)

(write)

handbook, full pagewidth

MBC461

S1 S2 S3 S4 S5 S6 S1 S2 S3 S4 S5 S6

ALE

PSEN

P2 PCH OUT

one machine cycle

PCH OUT PCH OUT PCH OUT PCH OUT

INST

PCL OUT

INST

PCL OUT

INST

PCL

OUT

INST

PCL

OUT

1997 Dec 15 18

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Fig.10 External program memory execution (continued).

a. With a MOVX to the External Data Memory (read).

b. With a MOVX to the External Data Memory (write).

handbook, full pagewidth

S1 S2 S3 S4 S5 S6 S1 S2 S3 S4 S5 S6

ALE

PSEN

P2 PCH OUT

cycle 1

cycle 2

PCH OUT DPH OUT PCH OUT

PCL

OUT

INST

DPL OUT

INST

PCL OUT

MBC464

DATA OUT

handbook, full pagewidth

S1 S2 S3 S4 S5 S6 S1 S2 S3 S4 S5 S6

ALE

PSEN

P2 PCH OUT

cycle 1

cycle 2

PCH OUT DPH OUT PCH OUT

PCL

OUT

INST

DPL

OUT

INST

PCL

OUT

MBC463

DATA

1997 Dec 15 19

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Fig.11 Internal and external data memory address space.

handbook, full pagewidth

MBC466 - 1

FFFF

0100

FF FF

SHARED

ADDRESS LOCATION

DATA MEMORY

direct byte addressing

SPECIAL

FUNCTION

REGISTERS

EXTERNAL

DATA

MEMORY

AUX - RAM 256 BYTES

LOWER

128 BYTES

INTERNAL

RAM

UPPER

128 BYTES

INTERNAL

RAM

1997 Dec 15 20

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

Fig.12 Special Function Register (SFR) memory map.

handbook, full pagewidth

MBC465 - 1

F7 F6 F5 F4 F3 F2 F1 F0 F0HB

E0HACC

E7 E6 E5 E4 E3 E2 E1 E0

DAHS1INT D9HS1BIT

SDI/

SDO

SCI/

SCO

CLHDOBBDCRBFDBWBFDASTRD9ENS

D8HS1SCS

FFHT3

CYD7ACD6FOD5RSID4RSOD3OVD2FID1P

D0HPSW

CDHTH2 CCHTL2 CBHRCAP2H CAHRCAP2L

TF2CFEXF2CERCLKCDTCLKCCEXEN2CBTR2

C8HT2CON

- - -BFPS1BEPT2BDPSBCPT1BBPX1BAPT0B9PX0 B8

B8HIP

B0HP3

EAAFES1AEET2ADESACET1ABEX1AAET0A9EX0

A8HIE

B7 B6 B5 B4 B3 B2 B1 B0

CP/RL2

C/T2

A0HP2 A7 A6 A5 A4 A3 A2 A1 A0

A5HWDCON

99HSBUF

SM09FSM19ESM29DREN9CTB89BRB89ATI99RI

98HSCON

90HP1

97 96 95 94 93 92 91 90

8DHTH1

TF18FTR18ETF08DTR08CIE18BIT18AIE089IT0

88HTCON

8CHTH0 8BH

TL1

8AHTL0 89HTMOD

87H

PCON

80HP0

87 86 85 84 83 82 81 80

81H

82H

83H

DPH DPL

MNEMONIC

BIT MNEMONIC /

BIT ADDRESS (HEX)

DIRECT BYTE

ADDRESS (HEX)

1997 Dec 15 21

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

9.3 Addressing

The P83C528 has five modes for addressing:

• Register

• Direct

• Register-Indirect

• Immediate

• Base-Register plus Index-Register-Indirect.

The first three methods can be used for addressing destination operands. Most instructions have a 'destination/source' field that specifies the data type, addressing methods and operands involved. For operations other than MOVs, the destination operand is also a source operand.

Access to memory addresses is as follows:

• Register in one of the four 8-bit register banks through Register, Direct or Register-Indirect addressing.

• 512 bytes of internal RAM through Direct or Register-Indirect addressing. Bytes 0-127 of internal RAM may be addressed directly/indirectly. Bytes 128-255 of internal RAM share their address location with the SFRs and so may only be addressed indirectly as data RAM. Bytes 0-255 of AUX-RAM can only be addressed indirectly via MOVX.

• SFR through Direct addressing at address locations 128-255.

• External data memory through Register-Indirect addressing.

• Program memory look-up tables through Base-Register plus Index-Register-Indirect addressing.

1997 Dec 15 22

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

10 I/O FACILITIES

The P83C528 has four 8-bit ports. Ports 0-3 are the same as in the 80C51, with the exception of the additional function of Port 1. Port lines P1.0 and P1.1 may be used as inputs for Timer 2, P1.1 may also be used as an additional (third) external interrupt request input. Port lines P1.6 and P1.7 may be selected as the SCL and SDA lines of Serial Port SIO1 (I2C). Because the I2C-bus may be active while the device is disconnected from VDD, these pins are provided with open drain drivers. Pins P1.6 and P1.7 do not have pull-up devices when used as ports.

Ports 0, 1, 2, and 3 perform the following alternative functions:

• Port 0: provides the multiplexed low-order address and data bus used for expanding the P83C528 with standard memories and peripherals.

• Port 1: pins can be configured individually to provide: external interrupt request input (external interrupt 2); external inputs for Timer/counter 2; SCL and SDA for the I2C interface.

• Port 2: provides the high-order address bus when expanding the P83C528 with external program memory and/or external data memory.

• Port 3: pins can be configured individually to provide: external interrupt request inputs (external interrupt 0/1); external inputs for Timer/counter 0 and Timer/counter 1; Serial Port receiver input and transmitter output control-signals to read and write external data memory.

Bits which are not used for the alternative functions may be used as normal bidirectional I/O pins. The generation or use of a Port 1 or Port 3 pin as an alternative function is carried out automatically by the P83C528 provided the associated SFR bit is HIGH. Otherwise the port pin is held at a logical LOW level.

Fig.13 I/O buffers in the P83C528 (Ports 1, 2 and 3 except P1.6 and P1.7).

andbook, full pagewidth

MLA513

input data

read port pin

2 oscillator

periods

strong pull-up

I/O PIN

PORT

+5 V

from port latch

INPUT

BUFFER

1997 Dec 15 23

Philips Semiconductors Product speciﬁcation

8-bit microcontrollers P83C524; P80C528; P83C528

11 TIMERS/COUNTERS

The P83C528 contains three 16-bit timer/counters, Timer 0, Timer 1 and Timer 2, and one 8-bit timer, the Watchdog Timer T3. Timer 0, Timer 1 and Timer 2 may be programmed to carry out the following functions:

• measure time intervals and pulse durations

• count events

• generate interrupt requests.

11.1 Timer 0 and Timer 1

Timers 0 and 1 each have a control bit in TMOD SFR that selects the timer or counter function of the corresponding timer. In the timer function, the register is incremented every machine cycle. Thus, one can think of it as counting machine cycles. Since a machine cycle consists of 12 oscillator periods, the count rate is

⁄12 of the oscillator

frequency. In the counter function, the register is incremented in

response to a HIGH-to-LOW transition at the corresponding external input pin, T0 or T1. In this function, the external input is sampled during S5P2 of every machine cycle. When the samples show a HIGH in one cycle and a LOW in the next cycle, the counter is incremented. Thus, it takes two machine cycles (24 oscillator periods) to recognize a HIGH-to-LOW transition. There are no restrictions on the duty cycle of the external input signal, but to ensure that a given level is sampled at least once before it changes, it should be held for at least one full machine cycle.

Timer 0 and Timer 1 can be programmed independently to operate in one of four modes:

Mode 0 8-bit timer/counter with divide-by-32 prescaler Mode 1 16-bit timer/counter Mode 2 8-bit timer/counter with automatic reload Mode 3 Timer 0: one 8-bit timer/counter and one 8-bit

timer. Timer 1: stopped.

When Timer 0 is in Mode 3, Timer 1 can be programmed to operate in Modes 0, 1 or 2 but cannot set an interrupt request flag and generate an interrupt. However, the overflow from Timer 1 can be used to pulse the Serial Port transmission-rate generator. With a 16 MHz crystal, the counting frequency of these timer/counters is as follows:

• in the timer function, the timer is incremented at a frequency of 1.33 MHz (oscillator frequency divided by

12).

• in the counter function, the frequency handling range for external inputs is 0 Hz to 0.66 MHz.

Both internal and external inputs can be gated to the timer by a second external source for directly measuring pulse duration.

The timers are started and stopped under software control. Each one sets its interrupt request flag when it overflows from all logic 1's to all logic 0's (respectively, the automatic reload value), with the exception of Mode 3 as previously described.

+ 53 hidden pages