Philips NPX643/INT user manual [hr]

User Manual

NeoPix Ultra 2

Home projector

TV

Register your product and get support at

www.philips.com/support

Table of contents

Introduction �������������������������������������������������3

Dear customer ...............................................................3

About this user manual ..............................................3

What’s in the box ..........................................................3

Customer service centre ............................................3

1 General safety information ��������������� 4

Setting up the product .............................................. 4

Repairs ............................................................................ 4

Power supply .................................................................5

2 Overview ������������������������������������������������5

Top view ...........................................................................5

Front view ....................................................................... 6

Rear view ........................................................................ 6

Remote control.............................................................6

3 Initial setup ��������������������������������������������7

Place the projector.......................................................7

Connect power supply ...............................................7

Prepare the remote control ..................................... 8

Power on ........................................................................ 8

First time setup ............................................................ 8

4 Operation ���������������������������������������������� 9

Image setup ................................................................... 9

Placement .....................................................................10

5 Use home screen ���������������������������������11

Use of Android TV ........................................................11

Settings of Android TV ..............................................11

Use wired keyboard/mouse ...................................12

Use Bluetooth Keyboard/mouse/gamepad..... 12

6 Chromecast streaming ��������������������� 12

Notice..............................................................................12

7 Connect to playback devices �����������13

Connect to devices through HDMI .......................13

Connect to devices through SPDIF ...................... 13

8 Other features ������������������������������������� 14

Listen through external speakers or

headphones .................................................................14

Charge a USB device .................................................14

Use HDMI ARC function ........................................... 14

9 Change settings ���������������������������������� 15

Android TV system settings .................................... 15

Projector system settings ........................................16

10 Service ��������������������������������������������������18

Cleaning .........................................................................18

Update software .........................................................18

Troubleshooting ..........................................................19

11 Appendix ���������������������������������������������� 21

Technical data ............................................................. 21

CE statement .............................................................. 22

FCC statement ............................................................ 22

Canada Regulatory Compliance ����������������������22

Other notice .................................................................23

Introduction

b

e

Dear customer

Thank you for purchasing this projector.

We hope you enjoy this product and the many
functions it offers!

About this user manual

The quick start guide supplied with this product
allows you to start using this product quickly
and easily. Detailed descriptions can be found
in the following sections of this user manual.

Read the entire user manual carefully. Follow
all safety instructions in order to ensure proper
operation of this product (see General safety
information, page 4). The manufacturer
accepts no liability if these instructions are not
followed.

Symbols used

Notice

Troubleshooting

This symbol indicates tips that will help
you in using this product more effectively
and easily.

DANGER!

Danger of personal injury!

This symbol gives warning of danger
of personal injury. Physical injury or
damage can result from improper
handling.

CAUTION!

Damage to the product or loss of data!

This symbol gives warning of damage
to the product and possible loss of
data. Damage can result from improper
handling.

What’s in the box

NeoPix Ultra 2TV projector (NPX643/INT)

a

Remote control with 2 AAA batteries

b

Lens cover

c

Quick Start Guide

d

AC power cable with plug x 3

e

a

c

OK

d

Customer service centre

You can find the support hotline in the warranty
card or online:

Web: www.philips.com/support

Mail: [e-mail]

International Phone: [phone]

Please ask your provider for international call
costs!

Access the electronic user manual at
https://support.philipsprojection.com

Access the community forum at
https://community.philipsprojection.com

Introduction 3

1 General safety

information

Take note of all warning and safety notes
indicated. Do not make any changes or settings
that are not described in this user manual.
Incorrect operation, and improper handling can
lead to physical injury, damage to the product
or loss of data.

Setting up the product

This product is for indoor use only. Place the
product securely on a stable, flat surface.
To help avoid possible injuries to persons or
damage to the product itself, position all cables
in such a way that no one will trip over them.

Do not operate the product in damp rooms.
Never touch the mains cable or the mains
connection with wet hands.

Never operate the product immediately after
moving it from a cold location to a hot location.
When the product is exposed to such a change
in temperature, moisture may condense on the
crucial internal parts.

The product must have sufficient ventilation
and must not be covered. Do not put the
product in closed cabinets, boxes, or other
enclosures when in use.

Protect the product from direct sunlight,
heat, intense temperature fluctuations and
moisture. Do not place the product in the
vicinity of heaters or air conditioners. Observe
the information on temperature listed in the
technical data (see Technical data, page
Technical data, page 21).

Prolonged operation of the product causes the
surface to become hot. In case of overheating,
the product automatically switches to standby
mode.

Do not allow liquids to leak into the product.
Turn off the product and disconnect it from the
mains supply if liquids or foreign substances
leaked into the product. Have the product
inspected by an authorised service centre.

Always handle the product with care. Avoid
touching the lens. Never place heavy or sharp
objects on the product or on the power cable.

If the product gets too hot or emits smoke,
shut it down immediately and unplug the
power cable. Have your product checked by
an authorised service centre. Keep the product

away from open flames (e.g. candles).

DANGER!

Risk of explosion with incorrect type
of batteries!

There is a risk of explosion if the wrong
battery type is used.

Do not expose the batteries (battery pack or
embedded batteries) to excessive heat such as
sunshine, or open fire.

Under the following conditions, a layer of
moisture can appear inside the product which
can lead to malfunctions:

• if the product is moved from a cold to a
warm area;

• after a cold room is heated;

• when the product is placed in a damp
room.

Proceed as follows to avoid any moisture
buildup:

1 Seal the product in a plastic bag before

moving it to another room, in order for it to
adapt to room conditions.

2 Wait one to two hours before you take the

product out of the plastic bag.

The product should not be used in a very dusty
environment. Dust particles and other foreign
objects may damage the product.

Do not expose the product to extreme
vibrations. This may damage the internal
components.

Do not allow children to handle the product
without supervision. The packing materials
should be kept out of the hands of children.

For your own safety, do not use the product
during thunderstorms with lightning.

Repairs

Do not repair the product yourself. Improper
maintenance can result in injuries or damage to
the product. The product must be repaired by
an authorised service centre.

Please find the details of authorised service
centres on the warranty card supplied with this
product.

Do not remove the type label from this product,
as this will void the warranty.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

4 Philips · NeoPix Ultra 2TV

Power supply

ab cde

Before connecting the power plug to the mains
socket, check whether the mains voltage of
the power supply matches the mains voltage
available at the setup location. This product
complies with the voltage type specified on the
product.

The power outlet shall be installed near the
product and shall be easily accessible.

CAUTION!

Always use the button to turn the
projector off.

Turn off the product and unplug from the
power outlet before cleaning the surface
(see Cleaning, page 18). Use a soft, lint­free cloth. Never use liquid, gaseous or easily
flammable cleaners (sprays, abrasives, polishes,
alcohol). Do not allow any moisture to reach
the interior of the product.

DANGER!

Risk of eye irritation!

This product is equipped with a high
power LED (Light Emitting Diode),
which emits very bright light. Do not
look directly into the projector lens
during operation. This could cause eye
irritation or damage.

2 Overview

Top view

NeoPix

TV

Ultra 2

a

• Switch the projector on or to standby.

• When the projector is switched on, the
LED turns white. When the projector is
in standby, the LED turns red.

b

Return to a previous menu screen.

c

• Navigate menu options.

• Increase volume.

d

• Navigate menu options.

• Decrease volume

e

• Access projector settings options.

• Confirm a selection or entry.

Overview 5

Front view

a b

c

f

f

h

l

j
i

k

a
b

c

Rear view

a

b

c

d

e
f

Front IR sensor
Focus adjustment knob

Adjust image sharpness.

Projection lens

a

b c d e

HDMISPDIF USB

SPDIF

Connect to the digital SPDIF audio input on
an HiFi audio system.

Connect to the HDMI output on a playback
device.

USB port

• Connect to power USB devices like
Amazon Fire TV stick®, Roku® streaming
stick (it also works for mass storage if
you install an app like VLC).

• Connect to a wired keyboard or mouse.

3.5 mm audio output; connect to external

speakers or headphones.

Rear IR sensor
Mains socket

Connect to the power supply.

Remote control

OK

a

Access voice search function (Google
Assistant).

b

Confirm a selection or entry.

c

Display installed apps and access the app
store.

d

e

f

g

h

+/-

Increase or decrease volume.

Note:

When the projector is connected to an
HDMI device and switched to HDMI input,
volume adjustment is not possible through
the remote control. Press to access
the settings options and go to Volume for
volume adjustment.

Quick access to Netflix service.

Quick access to Prime Video service.

Access or exit projector system settings
options.

Return to a previous menu screen.

a

b

c
d

e

g

6 Philips · NeoPix Ultra 2TV

i

Access the Android TV home screen.

Navigation buttons

j

Navigate menu options.

LED indicator

k

• Each time you press a button on the
remote control, the LED lights up briefly
then off.

• Blue light indicates the remote control
is in Android TV mode and navigation of
Android TV interface is possible.

• Red light indicates the remote control is
accessing the projector system settings
and navigation of Android TV interface
is not possible.

l

Switch the projector on or to standby.

3 Initial setup

Notice

Make sure all devices are disconnected
from the power outlet before establishing
or changing any connections.

Place the projector

Place the projector on a flat surface in front of
the projection surface.

You can also install the projector in different
configurations (see Placement, page 10).

Connect power supply

CAUTION!

Always use the button to turn the
projector on and off.

1 Select a supplied power cable with an

appropriate power plug.

2 Connect the power cable to the power

socket on the back of the projector, and
then to the wall outlet.

• The LED on the projector turns red.

HDMISPDIF USB

Initial setup 7

Prepare the remote control

CAUTION!

The improper use of batteries can
lead to overheating, explosion, risk of
fire and injury. Leaking batteries can
possibly damage the remote control.

Never expose the remote control to
direct sunlight.

Avoid deforming, dismantling or
charging the batteries.

Avoid exposure to open fire and water.

Replace empty batteries immediately.

Remove the batteries from the remote
control if not in use for long periods of
time.

1 Open the battery compartment.

2 Insert the supplied batteries (type AAA)

with correct polarity (+/- ) indicated.

3 Close the battery compartment.

First time setup

When you turn on the projector for the first time
or the projector is reset to the factory default
settings, you are prompted to make the Android
TV setup.

After setup, the projector will sign in to your
Google account and connect to the same WiFi
network as your phone.

What you need

• A WiFi internet connection

• A Google account

Step 1: Pair the remote control
with the projector

In the remote control pairing interface, you are
prompted to pair the remote control with the
projector through Bluetooth. Pairing can enable
the remote control to work in Android TV mode.

1 When prompted for pairing, hold down

OK and on the remote control for
about 10 seconds until the interface shows
successful connection.

Make sure the projector is turned on and as
close as possible to the remote control.

Step 2: Select language

1 When prompted for language section,

use the navigation buttons on the remote
control to select an on-screen language.

• When using the remote control with infrared
signals, point the remote control at the IR
sensor on the projector, and make sure
there is no obstacle between the remote
control and the IR sensor.

Power on

1 Press to turn on the projector. The LED

on the projector turns from red to white.

• To turn off the projector, press and
then press it again when the power-off
confirmation message pops up.
The LED on the projector turns from white
to red.

• The distance between the projector and
the screen determines the actual size of the
image.

8 Philips · NeoPix Ultra 2TV

Step 3: Set up the projector with
your Android phone

Set up the projector so that the projector will
sign in to your Google account and connect to
the same WiFi network as your phone.

1 When prompted for Android TV setup,

select "Continue" to initialize setup.

2 On your Android phone, launch the pre-

installed "Google" app. Follow on-screen
instructions to complete setup. After
successful setup, the projector signs in to
your Google account and connects to the
same WiFi network as your phone.