Philips MCM355 12 Quick Start Guide
Micro System
MCM355
What’s in the box
Quick start guide
1
Connect
Setup
2
Enjoy
3
FM antenna Remote Control
Quick start guide
1
Connect
Setup
2
Enjoy
2
Quick start guideUser manual
XXXXXXX
XXXXXX
XXXXXX
Eng
MCM355
1
A
Open the battery compartment.
1
Insert 2 AAA batteries with correct
2
polarity (+/-) as indicated.
Close the battery compartment.
3
Connect
Prepare the remote control
MP3 link cablePower cord
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specifi cations are subject to change without notice.
Trademarks are the proper ty of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China PDCC-2009
Eng
Note
D
Before you press any function button on the remote
•
control, press a source button to select source with
the remote control.
1
DISC
POWER
TUN USB AUX/MP3 Link
MODE SLEEP TIMER CLOCK/DISPLAY
DSC DBB
PROG RDS
VOL
MUTE
ALBUM/
PRESET
FM aerial
DISC
POWER
TUN USB AUX/MP3 Link
MODE SLEEP TIMER CLOCK/DISPLAY
DSC DBB
PROG RDS
ALBUM/
DISC
POWER
TUN USB AUX/MP3 Link
MODE SLEEP TIMER CLOCK/DISPLAY
DSC DBB
PROG RDS
VOL
MUTE
ALBUM/
PRESET
B
Note
D
• Ensure that the colors of the speaker wires
and terminals are matched.
Hold down the socket fl ap.
1
Insert the stripped part of the wire com-
2
pletely.
• Insert the right speaker wires to “
•
Release the socket fl ap.
3
C
Connect the supplied FM antenna to the
1
FM AERIAL jack on the main unit.
Connect
Connect Speaker
Right
L/Right H
L/Left H
Insert the red/blue wires to “ + ”,
black wires to “ - ”.
Connect FM antenna
”, left speaker wires to “
”.
Left
Speaker
(Right)
2
A
Speaker
HIGH CH
Right L
Left L
Right H
Left H
LOW CH
(Left)
SPEAKERS 6Ω
D Note
You cannot set the clock in Eco Power Standby mode.
•
In Eco Power Standby mode, press CLOCK to show
•
clock fi rst, then press and hold CLOCK to proceed
clock setting.
During the setup, if no button is pressed within 10
•
seconds, the system will exit the clock setting mode.
In standby mode, press and hold CLOCK/
1
DISPLAY to activate the clock setting mode.
»
2 Press repeatedly to select 12 hour or 24
hour format.
Setup
Set clock
[SET CLOCK] (set clock) is displayed
briefl y. Then the hour digits are dis-
played and begin to blink.
5 Press VOL +/- to set the minute.
6 Press CLOCK/DISPLAY to confi rm.
3
B
A
Note
D
Ensure that the USB device contains playable music.
•
1 Flip open the USB socket cover on the
front panel.
Insert the USB plug of a USB device into
2
the exposed socket.
»
»
Note for product
Enjoy
Play from USB
The total number of tracks is displayed.
Play starts automatically.
• To pause/resume play, press .
To stop play, press •
.
B
Note for product
3 Press VOL +/- to set the hour.
4 Press CLOCK/DISPLAY to confi rm.
» The minute digits are displayed and
begin to blink.
C
Tip
E
• See the User Manual for how to connect
other equipment to this system.
Connect power
D
Caution
C
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the Audio System.
• Before connecting the AC power cord,
ensure you have completed all other
connections.
1 Connect the power cord to the
AC~MAINS jack on the main unit.
2 Connect the power plug to the wall outlet.
AC MAINS ~
3
A
Press DISC to select the disc source.
1
Enjoy
Play disc
2 Press on the front panel to open the disc tray.
3 Insert a disc with the printed side facing up,
then close the disc tray.
» Play starts automatically.
• To pause/resume play, press
• To stop play, press
.
.
Program radio stations
C
automatically
1 In tuner mode, press and hold PROG for
2 seconds to activate automatic program
mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
Note for product
The first programmed radio station is
»
broadcast automatically.
Tip
E
• Detailed features and additional functions are
described in the user manual.
Loading...