
Quick Start Guide
MCM330
What’s in the Box?
You should fi nd these items upon opening the box.
1 x AC power
Quick Start Guide
1
Quick Start Guide User Manual
Remote Control
2
User Manual
Remove the protective tab to activate the
remote control battery.

1
Connect one end of the AC adaptor to the DC IN
socket on the bottom of the main unit.
2
Connect the other end of the AC adaptor to the wall
outlet.
Tip
See the User Manual on how to
connect other equipment to this
system.
1
AC power adaptor
Set clock
1
In the standby mode, press CLOCK SET to enter the clock setting mode.
2
Press J/K repeatedly to select 12 hour or 24 hour format.
3
Press CLOCK SET to confi rm.
The hour digits are displayed and begin to blink.
«
4
Press J/K to set the hour.
5
Press CLOCK SET to confi rm.
The minute digits are displayed and begin to blink.
«
6
Press J/K to set the minute.
2
7
Press CLOCK SET to confi rm the clock setting.

Play disc
1
Press CD to select the disc source.
2
Press OPEN/CLOSE to open the disc compar tment.
3
Insert a disc with the printed side facing outward, then press
OPEN/CLOSE to close the disc compar tment.
4
If the disc doesn’t play, pressÉÅ.
5
To stop play, press 9 .
Listen to radio
1
Press TUNER to select FM.
2
Press PROG for more than two seconds to program all available stations in order
of waveband.
3
Press
to select a preset number.
J/K

Play from USB or SD/MMC
1
Insert the USB plug of the device into the socket, or the SD/MMC card into
the SD/MMC socket.
2
Press USB/SD to select the USB source, or the SD source.
3
Play the audio fi les on the USB or SD/MMC card as you do with the albums/tracks
on a CD.
Tip
Detailed play features and additional functions are described in the supplied user
manual.
Royal Philips Electronics N.V. 2009
C
All rights reserved.
http://www.philips.com
EN
PDCC-JH/ZYL-0912