MCD 728
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Control Cable
FM antenna
Composite Video Cable
User Manual
User manual
Remote control with two
AAA batteries
2
1
Quick Start Guide
Quick start guide
Tips
– See the User Manual for other TV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
Connect the speaker and subwoofer cables.
2
Connect the FM antenna.
3
Connect the control cable.
4
Connect the composite video to a TV.
5
Connect the power cords of the system and TV.
AC power
5
FM antenna
Speaker
Subwoofer
(right)
Setting up the TV
1
Press SOURCE (DISC on the remote) to select disc source.
2
Turn on the TV and set it to the correct Video In channel.
4
2
Speaker
3
(left)
1
Setting the clock
1
In standby mode, press and hold CLOCK on the remote.
2
When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the
remote to set the hours.
3
Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or
press VOL +/- on the remote to set the minutes.
4
Press CLOCK again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC
and “1” to exit progressive scan.
ANALOG AUDIO SETUP
3D PROCESSING
PICTURE SETTING
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.
Playing a disc
1
Press OPEN •CLOSEç (ç on the remote) to open the disc tray and load in a disc,
then press the same button again to close the disc tray.
2
Load in a disc with the label side facing up.
3
Playback will start automatically. If not pressÉÅ.
4
To stop playback, press PRESET-/9 ( 9 on the remote).
Programming and tuning to radio stations
1
Press SOURCE (TUNER on the remote) to select tuner source.
2
Press PROGRAM on the remote for more than two seconds to program all available
stations in order of waveband.
3
Press PRESET+/– (O P on the remote) until the desired preset station is displayed.
Tip
Detailed playback features and
additional functions are described in the
accompany owner's manual.
Notes for remote control:
– First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or TUNER, for example).
– Then select the desired function (
for example).
C Royal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com
2;, í, ë
PDCC-JS/JW-0733
Loading...