Philips MCD705 98 User Manual

DVD Micro Theatre

MCD705

Manufactured under license from Dolby Laboratories.

"Dolby", "Pro-logic" and the double-D symbol are trademarks of Dolby Laboratories.

MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS, INC. US PAT. NO 5,451,942,5,956,674, 5,974,380, 5,978,762 AND OTHER WORLDWIDE

RESERVED.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reserve engineering or disassembly is prohibited.

DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license.

Windows Media is a trademark of Microsoft Corporation.

Index

English ------------------------------------------------ 4

-------------------------------------------------------- 39

English

Contents

English

General Information

Features .................................................................. 6

Supplied accessories ............................................ 6

Environment information ................................... 6

Installation .............................................................. 7

Maintenance .......................................................... 7

Connections

Step 1: Set up the surround speakers .............. 8

Step 2: Placing the speakers and subwoofer .. 8 Step 3: Connecting speakers and subwoofer . 9

Step 4: Connecting the control cable .............. 9

Step 5: Connecting TV................................... 9-11

Step 6: Connecting FM/MW antennas ........... 11

Step 7: Connecting the power cord ............... 12

Additional: Connecting additional equipment12

Functional Overview

DVD player and power amplifier .................... 13

Remote control ............................................ 14-15

Getting Started

Step 1: Inserting batteries into the Remote

Control ................................................................. 16

Step 2: Setting up the TV ........................... 16~17

Step 3: Setting the speakers ............................. 18

Step 4: Setting language preference ................ 18

Using the Remote Control to operate the Player

Selecting the colour system that corresponds to your TV Setting up Progressive Scan feature To deactivate Progressive manually

Adjusting the delay effect Adjusting volume level of individual speakers

Setting the Audio, Subtitle and Disc Menu language

Disc Operations

Playable Discs ...................................................... 20

Playing discs ......................................................... 20

Using the Disc Menu ......................................... 21

Basic playback controls .............................. 21~23

Pausing playback (DVD/VCD/CD/MP3/WMA) Selecting a track/chapter/title (DVD/VCD/CD/ MP3/WMA) Resuming playback from the last stopped point (DVD/VCD/CD/MP3/WMA) Zoom (DVD/VCD/JPEG) Repeat (DVD/VCD/CD/MP3/WMA) Repeat A-B (DVD/VCD/CD/MP3/WMA) Slow Motion (DVD/VCD) Program (not for Picture CD) Forward/Reverse Searching (DVD/VCD/CD/MP3/ WMA) Time search & search by chapter/track number (DVD/VCD/CD/MP3/WMA) Information display during playback (not for Picture CD)

Special disc features ........................................... 23

Playing a Title (DVD) Camera Angle (DVD) Changing the Audio Language (for DVD recorded with multiple languages) Changing the Audio Channel (for VCD/DivX only) Subtitles (DVD)

Playing MP3/WMA/JPEG Picture disc ............ 23

Playing MP3/WMA disc ..................................... 23

General operation Playback selection

Playing JPEG Picture CD................................... 24

General operation Playback selection

Special JPEG features ................................... 24-25

Preview function (JPEG) Zoom picture (JPEG) Slide show playback modes (JPEG) Playback with multi-angles (JPEG)

Playing a DivX disc ............................................. 25

Basic Functions

Switching the system on/off ............................. 19

Volume control ................................................... 19

Sound Control .................................................... 19

DBB (Dynamic Bass Boost) DSC (Digital Sound Control) Selecting surround sound

Dimming the display screen ............................. 19

System Menu Options

Basic Operations ................................................ 26

General Setup Page ..................................... 26~27

TV Display OSD Lang Screen Saver DIVX(R) VOD registration code

Audio Setup Page ........................................ 27~29

Speaker Setup SPDIF Setup Dolby Digital Setup 3D Processing HDCD Night mode

Video Setup Page......................................... 29~30

Component TV Mode Quality

Preference Page ........................................... 30~31

Parental Default

Password Setup Page ......................................... 31

Password mode Password

Other Functions

Radio reception .................................................. 32

Tuning to radio stations Presetting radio stations Listening to preset radio stations

Changing tuning grid .......................................... 32

Setting the clock ................................................. 33

Setting sleep/wake-up timer ............................ 33

Sleep timer setting Wak e-up timer setting

Contents

English

Specifications ........................................... 34

Tr oubleshooting ............................. 35~37

Glossary ......................................................... 38

General Information

English

Features

Your DVD Micro Theatre with 5.1-channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology.

Other features include:

Built-in DTS and Dolby Digital decoder, supporting Incredible Surround and DSC sound setting.

Additional Component Connections

Lets you connect other audio and audio/visual components to the DVD micro theatre.

Night mode

Lets you compress the dynamic range, reducing the difference in loudness between different sounds in Dolby Digital mode.

Parental Control (Rating Level)

Lets you set a ratings level so that your children cannot watch a DVD that has a rating higher than you set.

Sleep/Wake-up Timer

Enables the system to switch on/off automatically at a preset time.

Progressive Scan

Provides high quality flicker-free images for film based sources. When a picture refreshes, its ver tical resolution can double to 525 lines.

Supplied accessories

– Remote control with two AAA batteries – MW loop antenna – FM wire antenna – Audio (white, red) and composite video

(yellow) cables (2-in-1) – Control cable – Five satellite speakers and one subwoofer – Four small speaker stands for the front and

rear speakers – Four wall brackets with screws for the front

and rear speakers – Stand for the DVD player and power

amplifier – This instruction booklet and a Quick Star t

Guide

If any item is damaged or missing, contact your retailer or Philips.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Note: To fully enjoy the progressive scan feature, you need a progressive scan TV.

Installation

● Place the player on a flat, hard, and stable surface.

● In a cabinet, allow about 10cm (4 inches) of free

space all around the player for adequate ventilation.

● Do not expose your player to extreme

temperatures or humidity.

● The apparatus shall not be exposed to dripping

or splashing.

● No objects filled with liquids, such as vases, shall

be placed on the apparatus.

● No naked flame sources, such as lighted candles,

shall be placed on the apparatus.

● Install this unit near the AC outlet and where the

AC power plug can be reached easily.

● The ventilation should not be impeded by

covering the ventilation openings with items, such as newpapers, table-cloths, curtains, et.

Maintenance

● When a disc becomes dirty, clean it with a

cleaning cloth. Wipe the disc from the center out, in a straight line.

● Do not expose the player,

batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep the disc tray closed to avoid dust on the lens.

● Do not use solvents such as benzene, thinner,

commercially available cleaners, or anti-static spray intended for colour discs.

● The lens may cloud over when the player is

suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates.

General Information

English

Connections

English

IMPORTANT! – The type plate is located at the bottom of the system. – The voltage selector located at the bottom of this system is preset at 220V-240V from the factory. For countries that operate at 110V-127V, please adjust to 110V-127V before you switch on the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. –Never make or change any connections with the power switched on.

Step 1: Set up the surround

speakers

Note: – The surround speakers are labeled as REAR L. (left) or REAR R. (right).

Step 2: Placing the speakers and

subwoofer

Center speaker and

DVD system

Front speaker with

stand (Left)

Front speaker with

stand (Right)

1 Before connecting the speakers to the DVD

system, firmly attach the mini speaker stands to the surround speakers as shown in the above diagram.

2 Alternatively, you can choose to mount the

speakers on the wall. Attach the supplied bracket firmly to the rear of speakers using the supplied screws. Then mount a screw (not supplied) on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screw.

CAUTION! –You should get a qualified person to attach the brackets to the wall. DO NOT do it by yourself to avoid unexpected damage to the equipment or injury to personnel.

Surround

Speaker (Left)

Subwoofer

Surround

Speaker (Right)

For best possible surround sound, all the speakers (except subwoofer) should be placed at the same distance from the listening position.

1 Place the front left and right speakers at equal

distances from the TV and at an angle of approximately 45 degrees from the listening position.

2 Place the center speaker above the TV or the

DVD system so that the center channel's sound is localized.

3 Place the rear speakers at normal listening ear

level facing each other or hang on the wall.

4 Place the subwoofer on the floor near the TV.

Notes: –To avoid magnetic interference, do not position the front speakers too close to your TV. – Allow adequate ventilation around the DVD system.

Connections

Step 3: Connecting speakers

and subwoofer

● Connect the supplied speaker systems using the

fixed speaker cables by matching the colors of the jacks and speaker cable connectors.

Note: – Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

Step 4: Connecting the control

cable

Step 5: Connecting TV

IMPORTANT! –You only need to make one video connection from the following options, depending on the capabilities of your TV. – Connect the DVD system directly to the TV.

Using Composite Video jack

Option 1

1 Use the composite video connectors (yellow) of

the supplied audio and composite video cables (2-in1) to connect the DVD system's VIDEO OUT jack to the video input jack (or labeled as A/ V In, CVBS, Composite or Baseband) on the TV.

2 To hear the TV channels through this DVD

system, use the audio connector s (white/ red) of the supplied audio and composite video cables (2-in1) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV.

English

● Connect the serial port marked “CONTROL

CABLE” at the rear of the DVD player to the

same port at the rear of the power amplifier with the supplied flat control cable.

Connections

English

Using Component Video jacks (Y Pb Pr)

Using S-Video jack

IMPORTANT! – The progressive scan video quality is only possible when using Y Pb Pr, and a progressive scan TV is required.

Option 2

1 Use component video cables (red/blue/green -

not supplied) to connect the DVD system's Y Pb Pr jacks to the corresponding Component video input jacks (or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV.

2 To hear the TV channels through this DVD

system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV.

3 If you are using a Progressive Scan TV (TV must

indicate Progressive Scan or ProScan capability), to activate TV Progressive Scan, please refer to your TV user manual. For DVD system Progressive Scan function, see “Getting StartedSetting up Progressive Scan feature”.

IMPORTANT! – If S-Video is used for DVD playback connection, the system’s VIDEO OUT setting will need to be changed accordingly.

Option 3

1 Use an S-Video cable (not supplied) to connect

the DVD system’s S-VIDEO jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV.

2 To hear the TV channels through this DVD

system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV.

Note: – If your TV does not support Progressive Scan, you will not be able to view the picture. Press SYSTEM on the remote to exit the system menu and then DISC to exit progressive scan.

Connections

Using an accessory RF modulator

IMPORTANT! – If your TV only has a single Antenna In jack (labeled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

ANT IN

RF coaxial cable to TV

AUDIO IN

TO TVINT IN

VIDEO

R L

CH3 CH4

1 Use the composite video cable (yellow) to

connect the DVD system’s VIDEO OUT jack to the video input jack on the RF modulator.

2 Use an RF coaxial cable (not supplied) to

connect ANTENNA OUT or TO TV jack on the RF modulator to the Antenna IN jack on the TV.

3 Connect the Antenna or Cable TV service signal

to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV.)

Step 6: Connecting FM/MW

antennas

fix the claw into

the slot

antenna

1 Connect the supplied MW loop antenna to the

MW jack. Place the MW loop antenna on a shelf or attach to a stand or wall.

2 Connect the supplied FM antenna to the FM (75

Ω) jack. Extend the FM antenna and fix its end to the wall. For better FM stereo reception, connect an external FM antenna (not supplied).

English

Note: – Adjust the position of the antennas for optimal reception. –Position the antennas as far as possible from your TV, VCR or other radiation source to prevent unwanted interference.

Connections

English

Step 7: Connecting the power

cord

~ AC MAINS

After everything is connected properly,

plug in the AC power cord to the power outlet.

Never make or change any connection with the power switched on.

Additional: Connecting additional equipment

IMPORTANT! – Some discs are copy-protected. You cannot record the disc through a VCR or digital recording device. –When making connections, make sure the colour of cables matches the colour of jacks. –Always refer to the owner’s manual of the other equipment for complete connection and usage details.

Power Outlet

Viewing and listening to the playback of other equipment A

● Connect the system's AUX IN (R/L)

jacks to the AUDIO OUT jacks on the other audio/visual device (such as a TV, VCR, Laser Disc player or cassette deck).

Before starting operation, press SOURCE on the front panel to select AUX or press AUX on the remote in order to activate the input source.

Recording (digital) B

● Connect the system's COAXIAL or

OPTICAL jack to the DIGITAL IN jack

on a digital recording device (such as DTSDigital Theatre compatible, with Dolby Digital decoder).

Before starting operation, set the DIGITAL

OUT according to the audio connection. (See "DIGITAL OUT".)

Using the VCR for recording DVDs C

● Connect one of the system's VIDEO jacks

to the corresponding VIDEO IN jack and LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR. This will allow you to make analogue stereo (two channel, right and left) recordings.

VIDEO IN

AUDIO IN

VCR

AUDIO OUT

Television

+ 26 hidden pages