Philips MCD510 21 User Manual

DVD Micro Theatre
MCD510
México
Es necesario que lea cuidadosamente su instructivo de manejo.
PRECAUCIÓN - ADVERTENCIA
Verifique que el voltaje de alimentación
sea el requerido para su aparato
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
Descripción: Minisistema de Audio Modelo : MCD510/21 Alimentación: 110–127 / 220–240 V; ~50/60 Hz Consumo: 60 W Importador: Philips Mexicana, S.A. de C.V. Domicilio: Av. La Palma No.6
Localidad y Tel: Edo. de México C.P. 52784
Exportador: Philips Electronics HK, Ltd. País de Origen: China Nº de Serie: ______________________________
ATENCIÓN
Col. San Fernando La Herradura Huixquilucan
Tel.52 69 90 00
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
AVISO IMPORTANTE
Philips Mexicana, S.A. de C .V. no se hace
responsable por daños o desperfectos causados por:
– Maltrato, descuido o mal uso, presencia de
insectos o roedores (cucarachas, ratones etc.).
– Cuando el aparato no haya sido operarado
de acuerdo con el instructivo del uso, fuera de los valores nominales y tolerancias de las tensiones (voltaje), frecuencia (ciclaje) de alimentación eléctrica y las características que deben reunir las instalaciones auxiliares.
– Por fenómenos naturales tales como:
temblores, in eléctricas, rayos etc. o delitos causados por terceros (choques asaltos, riñas
2
undaciones, incendios, descargas
, etc.).
1
% 2
7
6
( 3
5
^
THEATHRE
) ¡
# $ 4
0 !
@
* 9 &
8
3
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro-logic” and the double-D symbol are trade-
marks of dolby Laboratories.
MANUFACTURED UNDER LICENSE FROM DIGITAL
THEATER SYSTEMS, INC. US PAT. NO 5,451,942,
5,956,674, 5,974,380, 5,978,762 AND OTHER WORLD-
WIDE PATENTS ISSUED AND PENDING. “DTS” AND “DTS
DIGITAL SURROUND” ARE RESISTERED TRADEMARKS
OF DIGITAL THEATER SYSTEMS, INC. COPYRIGHT 1996,
2000 DIGITAL THEATER SYSTEMS, INC. ALL RIGHTS
RESERVED.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reserve engineering or disassem-
bly is prohibited.
Windows Media is a trademark of Microsoft Corporation.
CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
4
Index
English ------------------------------------------------ 6
Por tuguês ------------------------------------------ 41
Español --------------------------------------------- 76
English
Français
Español
5
Contents
English
General Information
Features .................................................................. 8
Discs for playback ................................................ 8
Region codes
Supplied accessories ............................................ 8
Environmental information ................................ 9
Care and safety information ....................... 9~10
Connections
Step 1: Placing speakers .................................... 11
Step 2: Connecting speakers ............................ 12
Step 3: Antennas Connection .......................... 12
Step 4: Connecting TV ....................................... 13
Using component Video In jack (Cr CbY) Using Composite Video jacks (CVBS) Using S-Video In jack Using an accessory RF modulator
Step 5: Connecting the power cord ............... 15
Optional: Connecting additional equipment 15
Controls
Controls on the system .................................... 17
Controls on the remote control .............. 17-18
Basic Functions
Switching the system on ................................... 19
Switching the system to Eco Power Standby
mode ..................................................................... 19
Power-saving automatic standby ..................... 19
Volume control ................................................... 19
Listening through headphones ........................ 19
Sound control ..................................................... 19
Microphone Mixing ............................................ 20
Key Control ......................................................... 20
Echo ....................................................................... 20
Preparations
Step 1: Inserting batteries into the remote
control .................................................................. 21
Using the remote control to operate the system
Step 2: Setting the clock ................................... 21
Step 3: Setting language preference ................ 22
Step 4: Setting video preference ..................... 22
Disc Operations
Playing discs ......................................................... 24
Using the disc menu .......................................... 24
Basic playback controls ..................................... 25
Pausing playback Skipping to another title (track)/chapter Resuming playback from the last stopped point Repeat play mode Shuffle play mode Repeating a section within a chapter/track Fast search Programming favorite tracks GOTO Zoom
Special disc features ........................................... 27
Playing in slow motion mode Playing a Title Camera Angle Changing the Audio Language Changing the Audio Channel Subtitles
Playing MP3/ WMA/picture disc ...................... 27
MP3/WMA/picture disc
Mixed-mode disc ................................................ 28
DVD Menu Operations
Using the system menu ..................................... 29
Setting language preference
Setting video preference
Setting audio Night Mode
Setting Rating
Radio Reception
Tuning to radio stations .................................... 32
Programming radio stations ............................. 32
Automatic programming Manual programming
Tuning to preset radio stations ....................... 32
Changing tuning grid .......................................... 33
6
Ta pe Operation/Recording
Ta pe playback ...................................................... 34
Rewinding / Fast forwarding ............................ 34
General information on recording ................. 34
Preparation for recording ................................ 35
Synchro start CD recording ............................ 35
One touch recording......................................... 35
Recording timer .................................................. 35
Clock/Timer
Clock setting ....................................................... 36
Timer setting ....................................................... 36
Activating and deactivating timer
Sleep timer setting ............................................. 36
Specifications ........................................... 37
Tr oubleshooting .............................. 38-39
Glossary ......................................................... 40
Contents
English
7
General Information
English
Features
Your DVD Micro System with 2-channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology.
Additional Component Connections
Lets you connect other audio and audio/visual components to the system so you can use the system’s surround sound speakers.
Parental control (rating level)
Lets you set a rating level so that your children cannot watch a DVD that has a rating higher than you set.
Sleep timer
Enables the system to switch to standby mode automatically at a preset time.
Night Mode
Lets you compress the dynamic range, reducing the difference in loudness between different sounds in Dolby Digital mode.
Discs for playback
Your DVD System will play:
– Digital Video Discs (DVDs) – Video CDs (VCDs) – Super Video CDs (SVCDs) – Windows Media Audio (WMA) – Digital Video Discs + Rewritable (DVD+RW) – Compact Discs (CDs) – Picture (Kodak, JPEG) files on CDR(W) – Supported MP3-CD format.
ISO 9660 format
Max. title/album name –12 characters
Max. title number plus album is 255.
Max. nested director y is 8 levels.
The max. album number is 32.
The max. MP3 track number is 999.
Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
The following formats can’t be supported
The files like *.VMA, *.AAC, *.DLF, *.M3U,
*.PLS, *.WAV,
Non-English Album/Title name
The discs recorded under Joliet format
Region codes
DVDs must be labeled for ALL regions or Region 4 in order to play on this DVD system.
You cannot play discs that are labeled for other regions.
Notes: –For mixed mode discs, only one mode will be selected for playback according to the recording format. – If you are having trouble playing a certain disc, remove the disc and try a different one. Improperly formatted discs will not play on this system.
4
Supplied accessories
– Composite video cable (yellow)
– Audio cables (white, red)
– FM wire antenna
– MW loop antenna
– Plug adapter (not for all
versions )
– Remote Control and
two AA batteries
– This instruction booklet and a Quick Use Guide
8
General Information/Maintenance
Environmental information
Any unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Care and safety information
Avoid high temperatures, moisture, water and dust
Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep disc trays closed to avoid dust buildup on the lens.
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
The apparatus shall not be exposed to dripping
or splashing.
Install this unit near the AC outlet and where the
AC power plug can be reached easily.
Avoid condensation problem
The lens may cloud over when the player is
suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates.
Do not block the vents
Do not operate the system in an enclosed
cabinet and allow about 10 cm (4 inches) of free space all around the player for adequate ventilation.
10 cm
(4 inches)
10 cm
(4 inches)
DVD Micro System
10 cm
(4 inches)
The ventilation should not be impeded by
covering the ventilation openings with items, such as newspapers table-cloths, curtains, etc.
Cleaning the cabinet
Use soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning discs
To clean a CD, wipe it in a straight line from the
center towards the edge using soft and lint-free cloth. A cleaning agent may damage the disc.
Write only on the printed side of a CDR(W)
and only with a soft felt-tipped pen.
Handle the disc by its edge. Do not touch the
surface.
English
9
General Information/Maintenance
English
Cleaning the disc lens
After prolonged use, dirt or dust
may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Finding a suitable location
Place the player on a flat, hard, stable surface.
Cleaning the head and the tape paths
To ensure good recording and playback quality,
clean the head A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation.
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You also can clean the head by playing a cleaning
tape once.
CBABC
Demagnetising the head
Use a demagnetising tape available at your dealer.
The making of unauthorized copies of copy­protected material, including computer programmes, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.
10
Connections
Front
speaker
( left )
Front speaker ( right )
VIEWING AREA
S-VIDEO IN
AUDIO
TV IN
IN
VIDEO IN
speaker
(right)
IMPORTANT! – The type plate is located at the rear of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. –Never make or change any connections with the power switched on. – The voltage selector located at the bottom of this system is preset at 220V-240V from the factory. For countries that operate at 110V-127V, please adjust to 110V-127V before you switch on the system.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available
for all versions).
DIGITAL
DIGITAL OUT
OUT
LINE OUT
LINE OUT
RL
RL
FM 75
L
R
AM ANTENNA FM ANTENNA
AUX/ CDR IN
SUB WOOFER OUT
+
R
L
+
SPEAKERS 6
AUDIO
IN
FM/MW ANTENNA
S-VIDEO
IN
Cr
FM wire
Cb
VIDEO IN
3
3
antenna
Y
speaker
(left)
5
AC power cord
Step 1: Placing speakers
Place the front left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.
Notes:
-To avoid magnetic interference, do not position the front speakers too close to your TV set.
-Allow adequate ventilation around the DVD System.
English
MW loop
antenna
11
Connections
English
Step 2: Connecting speakers
FM Antenna
1
Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown.
Notes:
- Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.
-For optimal sound performance, use the supplied speakers.
- Do not connect more than one speaker to any one pair of +/- speaker terminals.
-Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
2
Step 3: Antennas Connection
Connect the supplied MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.
MW Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.
Position the antenna as far as possible from a TV,
VCR or other radiation source.
12
Loading...
+ 28 hidden pages