Philips LTC2377/50, LTC2376/50, LTC2372/50, LTC2375/50 User Manual

LTC 2372,LTC 2375 LTC 2376,LTC 2377
VidQuadDigital Processor Units
Installation Instructions
Eng
F
E
NL
I
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating instructions should be read before the unit is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this unit near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is classified as a wet location.
8. Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury to a person and serious damage to the unit. Use only with a stand, tripod, bracket, or mount recommended by the manufacturer, or sold with the product. Any mounting of the unit should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
9. Ventilation - Openings in the enclosure, if any, are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. This unit should not be placed in a built-in installation unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply you plan to use, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This unit may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternately, this unit may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
12. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.
13. Power Lines - An outdoor system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. U.S.A. models only ­refer to the National Electrical Code Article 820 regarding installation of CATV systems.
14. Overloading - Do not overload outlets and extension cords as this can result in a risk of fire or electric shock.
15. Object and Liquid Entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.
16. Servicing - Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
17. Damage Requiring Service - Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f. When the unit exhibits a distinct change in performance--this
indicates a need for service.
18. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
19. Safety Check - Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
20. Coax Grounding - If an outside cable system is connected to the unit, be sure the cable system is grounded. U.S.A. models only--Section 810 of the National Electrical Code, ANSI/NFPA No.70-1981, provides information with respect to proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
21. Lightning - For added protection of this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the unit due to lightning and power-line surges.
FCC & ICES INFORMATION
(U.S.A. AND CANADIAN MODELS ONLY)
WARNING - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Intensional or unintensional changes or modifications not expressly approved by the party responsible for compliance shall not be made. Any such changes or modifications could void the user’s authority to operate the equipment.
If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action. The user may find the following booklet prepared by the Federal Communications Commission helpful: "How to Identify and Resolve Radio-TV Interference Problems". This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No.004-000-00345-4.
1.2
Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
1.3
SAFETY PRECAUTIONS
This label may appear on the bottom of the unit due to space limitations.
The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Attention: Installation should be performed by qualified service personnel only in accordance with the National Electrical Code or applicable local codes. Power Disconnect. Units with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON-OFF switch is in the ON position. The power cord is the main power disconnect for all units.
CONTENTS
1 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3
1.1 VidQuad Digital Processor Unit . . . . . . . . . . . . . . .1.3
2 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3
3 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . .1.3
3.1 LTC 2372 & LTC 2375 . . . . . . . . . . . . . . . . . . . .1.3
3.2 LTC 2376 & LTC 2377 . . . . . . . . . . . . . . . . . . . .1.3
4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . .1.5
4.1 LTC 2372 & LTC 2375 . . . . . . . . . . . . . . . . . . . .1.5
4.2 LTC 2376 & LTC 2377 . . . . . . . . . . . . . . . . . . . .1.5
5 PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . .1.7
5.1 LTC 2372 & LTC 2375 . . . . . . . . . . . . . . . . . . . .1.7
5.2 LTC 2376 & LTC 2377 . . . . . . . . . . . . . . . . . . . .1.7
5.3 Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.8
5.4 Camera Sequence Setup . . . . . . . . . . . . . . . . . . . . .1.8
5.5 Alarm Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.9
5.6 VCR Out Mode . . . . . . . . . . . . . . . . . . . . . . . . . .1.10
5.7 Camera Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.10
5.8 Color Adjustment . . . . . . . . . . . . . . . . . . . . . . . . .1.11
5.9 Set the Password . . . . . . . . . . . . . . . . . . . . . . . . . .1.12
6 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . .1.13
6.1 LTC 2372 and LTC 2375 Operation . . . . . . . . . .1.13
6.2 LTC 2376 and LTC 2377 Operation . . . . . . . . . .1.13
7 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .1.15
1 UNPACKING
Unpack carefully. This is electronic equipment and should be handled carefully.
Check to ensure that the following items are included for the applicable modules ordered:
n LTC 237x VidQuad
Digital Processor Unit.
n Accessory pack. n Installation Instructions.
If the item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Philips Communication & Security Systems Sales Representative or Customer Service.
The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.
1.1 VidQuad Digital Processor Units
The LTC 237x VidQuad Digital Processor Units provide on­screen display of four camera inputs combined with numerous additional functions. The image display is updated depending on the model, providing either near or genuine real-time video.
The models available are:
Model Rated Voltage Power at System No. Voltage Range Rated
Voltage
Monochrome Models
LTC 2372/60 120 VAC, 60 Hz 108 to 132 6 W EIA LTC 2372/50 230 VAC, 50 Hz 195.5 to 253 6 W CCIR LTC 2376/60 120 VAC, 60 Hz 108 to 132 6 W EIA LTC 2376/50 230 VAC, 50 Hz 195.5 to 253 6 W CCIR
Color Models
LTC 2375/60 120 VAC, 60 Hz 108 to 132 12 W NTSC LTC 2375/50 230 VAC, 50 Hz 195.5 to 253 12 W PAL LTC 2377/60 120 VAC, 60 Hz 108 to 132 12 W NTSC LTC 2377/50 230 VAC, 50 Hz 195.5 to 253 12 W PAL
2 SERVICE
If the unit ever needs repair service, the customer should contact the nearest Philips Communication & Security Systems Service Center for authorization to return and shipping instructions.
3 DESCRIPTION
3.1 LTC 2372 & LTC 2375
The LTC 2372 VidQuadDigital Monochrome Processor and the LTC 2375 VidQuadDigital Color Processor provide four camera inputs. The units display high quality pictures from four cameras at one time on a monitor screen. The image display is updated at the field rate of 30 fields/sec. (NTSC), 25 fields/sec. (PAL), providing near-real-time video.
3.2 LTC 2376 & LTC 2377
The LTC 2376 VidQuadDigital Monochrome Processor and the LTC 2377 VidQuadDigital Color Processor provide on­screen display of four camera inputs combined with numerous additional functions. Each quadrant may be sequenced full screen in place of being displayed in a quad split. The image display is updated at the field rate of 60 fields/sec. (NTSC), 50 fields/sec. (PAL), providing genuine real-time video. In addition to the quad screen display, the units offer VCR "ZOOM"
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE.
1.4
playback function to allow full screen viewing during tape playback.
Note: To eliminate vertical roll during sequencing, (Quad to camera 1 only) the VidQuad output synchronizes to input 1. For the LTC 2377 series, it is recommended to have a color camera as camera 1.
Fig. 1: Typical Configuration for LTC 2372 and LTC 2375 VidQuad Digital Processor Unit
Fig. 2: Configuration for LTC 2376 and LTC 2377 VidQuad Digital Processor Unit using VCR only
Power
1
MON
GND
2
4
3
Camera 4
Camera 3
Camera 2
Camera 1
PHILIPS
Camera 1
18
Camera 2
Camera 3
Camera 4
15
ALARM OUT
ALARM IN
REMOTE
GND
COM 1 2 3 4
NCCOMNO G S
RELAY TRIG
9
12 3
MON
4
IN
1
VCR
OUT
2
4
3
Power
Looping (Automatic Termination)
Alarm Contact
IN OUT
VCR
1.5
4 INSTALLATION
4.1 LTC 2372 and LTC 2375 Connection
Fig. 4: LTC 2372 and LTC 2375 connection
Fig. 3: Configuration for LTC 2376 and LTC 2377 VidQuad Digital Processor Unit with Monitor Option
Camera 1
Quad display only
Item VidQuad Digital Processor
Camera 1 Video Input 1 - BNC Camera 2 Video Input 2 - BNC Camera 3 Video Input 3 - BNC Camera 4 Video Input 4 - BNC Monitor Video Mon - BNC
Camera 2
18
Camera 3
Camera 4
GND
Alarm Contact
PHILIPS
15
REMOTE
ALARM IN
COM 1 2 3 4
9
ALARM OUT
NCCOMNO G S
RELAY TRIG
12 3
4
MON
PHILIPS
IN
1
VCR
OUT
2
4
3
Power
Looping (Automatic Termination)
IN OUT
VCR
Main Monitor
Monitor
GND
MON
1
2
4
3
Loading...
+ 10 hidden pages