3
Enjoy
What’s in the box?
Start disc playback
A Press ç to open the disc tray.
B Place a disc with the disc label facing up.
C Press ç to close the disc tray.
D Playback starts automatically.
E If the disc menu appears on the TV, use
keys or the numeric keypad to select an option in
the menu and press OK to start playback.
z
To enjoy the powerful surround sound
from the speakers, press SURROUND
on the remote control to turn on the
multi-channel surround mode.
F Press
to stop playback.
Note When you press u button,
playback resumes from where it last stopped.
To start playback from the beginning, you
have to press .
Playback other supported
devices
USB device
A Insert your USB device to the USB socket.
B Press USB to switch to ‘USB’ mode.
C Press u to start playback.
D To stop playback, press DISC to switch to ‘DISC’
mode. You can unplug your USB device now.
Other portable audio player
A Use a 3.5mm stereo audio cable (not supplied) to
connect the headphone output socket on your
portable audio player to MP3 LINK socket.
B Press PLAY on your portable audio player.
C Press AUX (MP3 LINK) repeatedly until ‘MP3
LINK’ is displayed to listen to the playback.
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
2008 C Koninklijke Philips N.V.
All rights reserved.
www.philips.com
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
HTS3265
Main Unit
Remote Control
and 2 batteries
User
Manual
1 centre, 2 front, 2 rear speakers
and subwoofer
Composite
video cable
Power cable
FM wire antenna
MP3 LINK
MP3 LINK
MIC LEVEL
MIC
MIC LEVEL
MIC
hts3265_98_qsg_final804.indd 1hts3265_98_qsg_final804.indd 1 2008-02-01 11:34:45 AM2008-02-01 11:34:45 AM
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A Place the centre speaker above or close to the TV.
B Place the subwoofer on the floor, at least one metre
away from the TV.
C Place the front speakers at equal distances from the
TV.
D Place the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
z
Use the supplied composite video cable to connect
the CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV.
2
Set up
C
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
A
Finding the viewing channel
A Press 2 (Standby-On) on the main unit to turn it
on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
°
button) until
you see the Video In channel.
B
Select the display language on the
screen
A Press OPTIONS.
The { General Setup } appears.
B Press
.
Press OPTIONS to exit menu
General Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
DivX(R) VOD Code
Sleep
English
Malayu
C Use keys to select { OSD Language } and press
.
D Use keys to select a language option in the
menu and press OK to confirm.
E Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theatre
System. Refer to the user manual for more information.
D
Connect the radio antenna and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A Connect the FM antenna (supplied) to the inner pin
of the FM 75 socket. (For some models, it has
been connected in the factory.) Extend the wire for
optimum reception.
B Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX sockets on the main unit to the AUDIO OUT
sockets on your TV.
Note When watching the TV programs, you can
press AUX (MP3 LINK) repeatedly on the remote
control until ‘AUX 1’ or “AUX 2’ is displayed to get
the sound output from the speakers.
Main Unit (rear)
Television (rear)
Main Unit (rear)
Main Unit (rear)
FM antenna
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
Main Unit (rear)
Main Unit (Front)
Standby button
TV (rear)
REAR
LEFT
FRONT
LEFT
CENTER
REAR
RIGHT
FRONT
RIGHT
SUBWOOFER
A
B
VIDEO IN
(CVBS)
AUDIO OUT
AUDIO
OUT
AUDIO IN
hts3265_98_qsg_final804.indd 2hts3265_98_qsg_final804.indd 2 2008-02-01 11:34:50 AM2008-02-01 11:34:50 AM