Philips HR8570B Service Manual
Mobilo Vacuum cleaner
HR 8570
/B
Service
Information
!
Philips Domestic Appliances and Personal Care
Service
Information
!
Service Manual
PRODUCT INFORMATION
- Maximum air displacement : 37 l/sec.
- Maximum vacuum water column : 310 cm
- Power consumption (IEC) : 1400 W
- Dust storage capacity : 3 litres
- Cord length : 6.3 metres
- Filter system : Paper dustbag
: Motor inlet fi lter
: Exhaust air fi lter
- Dimensions cleaner : 44.5 x 29.5 x 25 cm
- Weight cleaner : 5.5 kg
- Colour cleaner : Brown
- Noise : 77 dB
OPTIONAL
Exhaust air fi lter HR 6932 (8836 932 01210)
Active carbon fi lter HR 6949 (8836 949 01010)
Active carbon fi lter replacem. set HR 6968 (items 12 + 13)
S-class fi lter HR 6992 (8836 992 01010)
S-class fi lter replacement set HR 6994 (items 19 + 20)
Sydney cotton dustbag HR 6997 (8836 997 01010)
Sydney closable pap. dustbag HR 6999 (8836 999 01010)
Sydney 3-M dustbag HR 6999 (8836 999 90010)
SERVICE INFORMATION
- Component confi guration on exploded view may differ in case
of specifi c versions. However, the actual components are distin-
guished bij means of code numbers.
- The spare parts have been standardized as much as possible.
- Item 6, cotton dustbag, is used in those countries where paper
dustbags are not available.
- Item 21 is provided with a long cord-winder spring; both long and
short cords can be used in combination with this spring.
- Cordwinder spring has to be tensioned till maximum minus
approx. 1,5 revolution.
- Depending on the original length of the cord, the spare cord must
be shortened.
- To (dis)assemble the appliance use TORX screw driver no T15
= 4822 395 10329, which is one of a set consisting of T20, T15,
TI0, T9, T8, T7 and T6 = 4822 395 50145.
- Adjusting the PCB on the motor to 220V, 60Hz.
1. Make sure that the potentiometer (item 36) is set at min.
position.
2. Adjust the potentiometer on the PCB item 45, on the motor to
220V/60Hz to allow the motor to run smoothly.
Please note: the standard setting of the spare PCB is
230V/50Hz.
There are open-circuit voltages on all wires.
This product meets the requirements regarding interference suppression on radio and TV.
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
After the product has been repaired, it should
function properly and has to meet the safety
requirements as offi cially laid down at this
moment.
4322 277 00439
01/01
Pos. 12 nc description
1 4322 003 16790 acc. cover
2 4322 000 67680 dust indicator spring
3 4322 009 07380 dust cover brown
4 4322 001 94690 packing ring
5 4322 003 16760 front cover
6 8836 999 01010 Sydney closable pap. dustbags (opt.)
8836 999 90010 Sydney 3M dustbag
8836 997 01010 Sydney cotton dustbag (opt.)
7 4322 009 06760 dustbag carrier
8 4322 003 12280 clamp of dustbag carrier
9 4322 003 12020 dust compartment sealing
10 4322 005 11510 turn knob
11 4322 005 08720 back panel stamped
12 4322 009 07040 inletgrill + trio fi lter
4322 003 10950 active carbon fi lter grill (opt.)
13 4322 000 37300 trio fi lter
8836 949 01010 active carbon fi lter (opt.)
14 4322 005 08670 pedal
15 4322 001 72780 buffering motor
16 4322 003 12080 motor disc
17 4322 003 16770 cord outlet
18 4322 009 07400 lower housing + wheels
19 8836 992 01010 S-class fi lter (opt.)
8836 932 01210 AFS micro fi lter
20 4322 005 08660 grill S-class fi lter (opt.)
4322 009 07160 grill AFS micro fi lter
21 4322 009 05350 reel half spring unit
23 4322 001 72360 brake tyre
24 4322 009 04800 reel half contact unit
25 4322 009 05060 contact ring plate
26 4322 007 11960 cord Australia l = 6.3 m
27 4322 007 12150 cord Japan / low voltage
28 4322 007 12190 cord UK l = 6.3 m
29 4322 007 11930 cord Europe 4.8 mm l = 6.3 m
4322 007 11920 cord Europe 4.8 mm l = 8.5 m (opt.)
Pos. 12 nc description
30 4322 007 12020 cord Swiss l = 6.3m
4322 006 01280 cord Swiss l = 8.5m (opt.)
31 4322 007 11950 cord Italy l = 6.3 m
32 4322 003 12240 dustbag sealing
33 4322 005 10760 caster assy standard
35 4322 009 07410 rear wheel + cover
36 4322 006 07220 speed control 220-240 V
37 4322 003 12030 cord winder lever
41 4322 006 50580 push button switch
42 4322 003 12010 motor cover
43 4322 001 72790 rear motor buffer
44 4322 003 09720 suspension bracket
45 4322 006 20720 motor print 230 V - 50 Hz
46 4322 000 03700 PCB clamp
47 4322 009 06430 motor 220-240 V / 50-60 Hz
48 4322 000 09750 spring switch knob
75 4322 004 21850 hose and standard bend
76 4322 005 03770 bend
77 4322 003 12070 crevice nozzle 118 mm
78 4322 004 21160 small nozzle
81 4322 004 21170 plumeau
103 4322 009 05410 Tube clip assy 35 mm
104 4322 004 21050 Telesc. tube + clamp
105 4322 004 21810 Nozzle RD 262
114 4822 479 20196 Turbo nozzle HR 6988
115 4822 528 11128 Coupling piece conical
116 4822 358 10205 Drive belt
117 4822 479 20201 Brush assy
M
MOTOR
POWER
MODULE
MAIN
SWITCH
CORD WINDER
ROTARY
POTMETER
- To open the appliance, fi rst remove the 2 screws of the
control panel (item 11) then with a big screw driver disconnect the 2 snap locks of panel and lower housing
(see drawing).
Loading...