Philips HR8569AD Service Manual

Mobilo Vacuum cleaner

HR8569
/A
/B
/C
/D

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

- This product meets the requirements regarding
interference suppression on radio and TV.

- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.

TECHNICAL INFORMATION

Versions

- /A Colour : Green
/B changed version with modified cord winder
/C changed accessories with connical connection
/D changed with IR-RMC control and accessories

with active coupling

- Maximum air displacement : 37 l/sec.

- Maximum vacuum water column : 310 cm

- Power consumption (IEC) : 1400 W

- Duststorage capacity : 3 litres

- Cord length : 6.3 metres

- Filter system : Paper dustbag
: Motor inlet filter
: Exhaust air filter

- Dimensions cleaner : 445 x 295 x 250 mm

- Weight cleaner : 5.5 kg

- Noise : 77 dB

OPTIONAL (accessories)

Exhaust air filter HR6932 = 8838 032 02010
Active carbon filter HR6949 = 8838 033 01010
Active carbon filter replacem. set HR6968 = item 12 + 13
S-class filter HR6992 = 8838 044 01010
S-class filter replacement set HR6994 = item 19 + 20
Sydney cotton dustbag HR6997 = 8836 997 01010
Sydney closable paper dustbag HR6999 = 8836 999 01010
Sydney 3-M dustbag HR6999 = 8836 999 90010

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

04/03

HR8569 /A /B /C /D

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

- To open the appliance, first remove the 2 screws of the

control panel (item 11) then with a big screw driver
disconnect the 2 snap locks of panel and lower housing
(see drawing).

- The component configuration shown in the exploded view
may differ in case of specific versions. The components are
distinguished by means of code numbers.

- When the repair is finished, check whether all functions of
the appliance work properly.

- To (dis)assemble the appliance use TORX screw driver no
T15 (4822 395 10329), which is one of a set consisting of
T20, T15, TI0, T9, T8, T7 and T6 = 4822 395 50145.

REPAIR INSTRUCTION

- The infrared remote control can adjust the suction power
with 5 speeds. When switched on, the appliance always
starts with the highest power, even without a connected
hose. Use LR03 batteries. Alkaline is advised.

- The spare parts have been standardized as much as possible.

- Item 6, cotton dustbag, is used in those countries where
paper dustbags are not available.

- The cordwinder is provided with a long cord-winder spring;
both long and short cords can be used in combination with
this spring.

- The cord winder spring must be tensioned to the maximum
level and then be rewound approx. 1.5 turn.

- Depending on the original cord, the spare cord must be
shortened to the length of the original cord.

- If the cord comes without AMP clamps, it can be soldered
onto the terminals.

- If the reel half spring unit is replaced, shaft A must be
lubricated with silicone grease (A). Do not apply any
silicone grease to or spill any grease on the terminals or
conductors.

- Adjusting the PCB on the motor to 220V, 60Hz.

1. Make sure that the potentiometer (item 36) is set at

min. position.

2. Adjust the potentiometer on the PCB item 45, on the

motor to 220V/60Hz to allow the motor to run
smoothly.

Please note: the standard setting of the spare PCB is

230V/50Hz.
There are open-circuit voltages on all wires.

Versions /A /B /C Version /D

MAIN

SWITCH

CORD WINDER

M

MOTOR
POWER

MODULE

ROTARY
POTMETER

M

PMT

MOTOR
POWER

MODULE

MAIN

SWITCH

CORD WINDER

IR-RECEIVER

+

CONTROL

IR

IR-TRANSMITTER

2-7

PARTS LIST

HR8569 /A /B /C /D

Pos Service code Description Version

1

4322 003 16870

2

4322 000 67680

3

4322 009 07390

4

4322 001 94690

5

4322 003 16900

6

8836 999 01010
8836 999 90010
8836 997 01010

7

4322 009 06760

8

4322 003 12280

9

4322 003 12020

10

4322 005 11480
4322 005 08650

11

4322 003 16930
4322 005 15120

12

4322 009 07040
4322 003 10950

13

4322 000 37300
8838 033 01010

14

4322 005 11490

15

4322 001 72780

16

4322 003 12080

17

4322 003 22830

18

4322 009 08970

19

8838 044 01010

8838 032 02010

20

4322 005 15970
4322 009 07160

21

4322 009 05350

23

4322 001 72360

24

4322 009 04800

25

4322 009 05060

26

4322 007 11960

27

4322 007 12150

28

4322 007 12190

29

4322 007 11930
4322 007 11920

30

4322 007 12020
4322 006 01280

31

4322 007 11950

32

4322 003 12240

33

4322 005 08700

35

4322 009 06710

36

4322 006 07220
4322 006 22370

37

4322 003 12030

41

4322 006 50680

Acc. cover
Dust indicator spring
Dust cover green
Packing ring
Front cover

Sydney closable pap. dustbags
Sydney 3M dustbag (opt.)
Sydney cotton dustbag (opt.)
Dustbag carrier
Clamp of dustbag carrier

Dust compartment sealing
Turn knob /A/B/C
IR lens /D
Back panel /A/B/C
Back panel RMC /D

Inletgrill + trio fi lter
Active carbon fi lter grill (opt.)
Trio fi lter
Active carbon fi lter (opt.)
Pedal

Buffering motor
Motor disc
Cord outlet
Lower housing + wheels
S-class fi lter (opt.)

AFS micro fi lter
Grill S-class fi lter (opt.)
Grill AFS micro fi lter
Reel half spring unit /A
Brake tyre /A

Reel half contact unit /A
Contact ring plate /A
Cord Australia l = 6.3 m /A
Cord Japan / low voltage /A
Cord UK l = 6.3 m /A

Cord 4.8 mm l = 6.3 m /A
Cord 4.8 mm l = 8.5 m (opt.) /A
Cord Swiss l = 6.3 m /A
Cord Swiss l = 8.5 m (opt.) /A
Cord Italy l = 6.3 m /A

Dustbag sealing
Caster assy standard
Rear wheel + cover
Speed control 220 - 240 V /A/B/C
Speed control IR receiver. /D

Cord winder lever
Push button switch

Pos Service code Description Version

42

4322 003 12010

43

4322 001 72790

44

4322 003 09720

45

4322 006 20720
4322 006 22460

46

4322 000 03700

47

4322 009 06430

48

4322 000 09750

73

4322 006 22600

73a

4322 003 19420

74

4322 007 16000

75

4322 005 08310

4322 004 23130

76

4322 003 16020

4322 005 15910
4322 003 18860

77

4322 003 16010
4322 003 20090

78

4322 004 22560

4322 004 22880

81

4322 004 22570
4322 004 22890

82

4322 009 07940

83

4322 001 72360

84

4322 009 07950

85

4322 009 07960

86

4322 006 01440
4322 006 01760

87

4322 006 01680

88

4322 006 01720

89

4322 006 01410

90

4322 006 01670

91

4322 006 01460

103

4322 003 20730

104

4322 004 22510
4322 004 22990

105

4322 004 23120
4322 004 22490

111

4322 004 22970

4322 004 22550

112

4322 005 11040

113

8838 041 01010

121

4322 001 99120

122

4322 007 45550

A

5322 390 20011

B

4322 002 82550

Motor cover
Rear motor buffer
Suspension bracket
Motorprint 230 V - 50 Hz /A/B/C
Motorprint 230 V - 50 Hz RMC /D

PCB clamp
Motor 220-240 V / 50-60 Hz
Spring switch knob
IR-RMC send unit /D
Cover battery compartment /D

Leafspring /A/B/D
Bend and hose /A/B
Standardized for /D
Bend and hose conn. coupl. /C
Bend /A/B

Bend conn. coupl. /C
Bend RMC /D
Crevice nozzle 118 mm /A/B/D
Crevice nozzle conn. coupl. /C
Small nozzle /A/B/D

Small nozzle conn. coupl. /C
Plumeau /A/B/D
Plumeau assy conn. coupl. /C
Reel half spring unit (L=9m) /B/C/D
Brake tyre /B/C/D

Reel half contact unit /B/C/D
Contact ring plate /B/C/D
Argentina L=9.3 m /B/C/D
Australia L=9.3 m /B/C/D
Taiwan L=6.3 m /B/C/D

U.K. / H.K. L=9.3 m
Euro 4.8mm pins L=9.3 m /B/C/D
Swiss L=9.3 m /B/C/D
Italy L=9.3 m /B/C/D
Tube clip assy 35 mm

Telescopic tube + clamp /A/B/D
Telesc. tube chr. conn. coupl. /C
Nozzle RD262 act. coupling /A/B/D
Nozzle Reach and Clean /C
Polishing nozzle act. coupl. /A/B/D

Polishing nozzle conn. coupl. (opt.) /C
Polishing disc
Polishing brushes HR 8041
Coupling bush /A/B/D
Coupling spring /A/B/D

Silicon grease for the shaft
Screw 3.5 x 12 / T10

/B/C/D

3-7