Beard Trimmer
HQ-T789
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Features:
-Contour Tracking System; comb adapts to the contours of the face
-Precision Zoom Lock; for precise adjustability of the comb in 9 lenghts between 1.5 mm and 18 mm.
-Beard length indication window
-Pop-up precision trimmer for moustache and contouring
-Corded mains operation and cordless rechargebale operation possilble
-Charging indication
-Maintenance free cutting element: no oiling required
-Three dimensional rounded teeth at skin side for max.comfort
-Liquid Chrystal Display
-This product meets the requirements regarding interference suppression on radio and TV.
-After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
TECHNICAL INFORMATION
Power system |
: 1 hour rechargeable and mains |
Rechargeable: |
|
Batteries |
: 2 x AA NiCd or NiMh |
Charging period |
: NiCd / NiMh batteries: 1 hour |
Capacity |
: NiCd batteries : 40 minutes |
|
NiMh batteries : 50 minutes |
Batteryfull indication |
: Light blinks when battery is fully |
|
charged |
Charging indication |
: Plug symbol to indicate correct |
|
charging and blinking segments to |
|
indicate charge level |
Battery full indication |
: All segments visible to indicate that |
|
battery is fully charged |
Mains: |
|
Voltage |
: Automatic voltage selection |
|
(100 - 240 V / 50 - 60 Hz) |
NOTES :
•In order to guarantee the longest possible working life of the battery :
-do not charge for more than 24 hours
-do not keep the charging unit permanently plugged in
-discharge the battery completely once a year by letting the motor run until it stops
•The appliance should be charged again, when not used for a long period
Published by Philips Domestic Appliances and Personal Care |
Printed in the Netherlands |
© Copyright reserved |
Subject to modification |
03/02
DISASSEMBLY ADVICE
to replace SPRING ZOOM RING (6)
remove COMB (1)
SCREW A
COVER (7) PROFILER (12) COMB HOLDER (4) ZOOM RING (5)
PARTS LIST
to replace ON / OFF KNOB (8)
BATTERY (10) PCB (9)
MOTION CONVERTER (11)
remove COMB (1)
CUTTER (2) HOUSING CLAMP (3) COMBHOLDER (4) SCREW A
COVER (7) ZOOM RING (5) PROFILER (12) CAP B
HQ-T789
to replace PROFILER (12)
remove COMB (1)
SCREW A
COVER (7)
REPAIR INSTRUCTIONS
-Never use again a deformed housing clamp (3).
OPTIONAL (accessories)
- No specific issues.
Pos |
Service code |
Description |
|
|
|
1 |
4203 035 78450 |
comb |
2 |
4203 035 76420 |
cutter |
3 |
4203 035 76410 |
housing clamp |
4 |
4203 035 78460 |
comb holder |
5 |
4203 035 76350 |
zoomring |
6 |
4203 035 71380 |
spring zoom ring |
7 |
4203 035 78480 |
cover |
8 |
4203 035 78490 |
on/off knob |
9 |
4203 035 78500 |
PCB (incl. LCD) |
|
|
|
Pos |
Service code |
Description |
104203 035 78520 battery NiCd (2 pcs)
4203 035 78530 battery NiMh (2 pcs)
11 |
4203 035 76480 |
motion converter |
12 |
4203 035 78540 |
profiler |
13 |
4822 479 30183 |
cleaning brush |
14 |
4203 035 78550 |
charger NiCd / NiMh - EURO |
|
4203 035 78560 |
charger NiCd - UK |
|
4203 035 78570 |
charger NiCd - CND |
|
4203 035 78590 |
charger NiCd - USA |
2-3