Philips HQ-T360 Service Manual

Beard Trimmer
HQ-T 360
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION Features :
- Adjustable attachment comb for even cutting result.
- With stubble setting for 1.5 mm stubble beard.
- Maintenance free cutting element : no oiling required.
- Green pilot light to indicate charging.
TECHNICAL DATA
Power system : rechargeable Batteries : 1 x AA NiCd Charging period : 10 hours Capacity : 40 minutes of cordless trimming
Product meets the requirements regarding interference suppression on radio and TV.
NOTES :
* The charging stand can also be used to store the trimmer * In order to guarantee the longest possible working life of
the battery :
- do not charge for more than 24 hours
- do not keep the charging unit permanently plugged in
- discharge the battery completely once a year by letting the motor run until it stops
* If the battery is empty and the consumer wants to trim his
beard, the trimmer has to be charged for at least 1.5 hours to have enough power for one trim
* The appliance should be charged again, when not used for
a long period
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
4322 277 00101 99/12
PCS 101 334
DISASSEMBLY ADVICE EXPLODED VIEW + PARTS LIST HQ-T 360
to replace SPRING ON / OFF SWITCH
1
2
7
6
to replace BATTERY (6) remove SCREW A
A
Pos
Description Service code
Comb
1
Cutter
2
Cleaning brush
3
Spring on/off switch
4
Slide on/off switch
5
Battery NiCd
6
Adapter NiCd - EURO
7
Adapter NiCd - UK Adapter NiCd - USA Adapter NiCd - CDN
Dir. for use: UK, D, S, N, SF, DK, GR Dir. for use: UK, D, F, NL, E, P, I, TR Dir. for use: UK, Russian, Polish, Estonian, Latvian, Lithuanian Dir. for use: UK, Russian, Ukrainian, Croatian, Slovenian, Czech,
A
345
4822 690 10173 4822 690 10174 4822 479 30183 4822 492 71508 4822 277 11808 4822 138 10336 4822 219 10311
4822 219 10313 4822 219 10284 4822 219 10285
4203 035 72170 4203 035 72160 4203 035 72220 4203 035 72230
Slovak, Hungarian, Rumanian
Before reassembling the battery holder, make sure that the internal wiring is guided as shown in fi gure 1.
Figure 1
PCS 101 334
After the product has been repaired, it should function properly and has to meet the safety requirements as laid down and offi cially established at this moment.
Loading...