Rechargeable shaver
HQ 488/A NiMH
HQ 488/B NiCd
Domestic Appliances and Personal Care
GENERAL |
D |
R |
|
|
|
The HQ488 shaver can be recharged in 1 hour |
C |
A |
100-240 V |
M |
|
|
R |
|
by means of a ’Fly Back Self Oscillating Power |
V |
t cell |
|
||
supply’. |
|
SK |
This electronic circuit enables the cell to be |
|
|
charged at 100-240 V, 50/60 Hz. |
|
R |
It is possible to have a shave directly from the |
|
|
|
t amb. |
|
mains. |
|
|
|
|
|
The green LED only illuminates when the shaver |
|
|
is connected to the mains. |
|
|
The electronic circuit incorporates the following functions and controls:
-a 1200 mA Quick Charge supply.
-a 35 mA Trickle Charge supply.
-a 1.25 V / 2.1 A Dynamic supply when shaving from the mains.
-an open cell protection (Vbat >1.8V).
-a temperature protection of the cell.
(if Tcell - Tamb >7C, charging will switch-over from Quick Charge to Trickle Charge).
HINTS FOR REPAIRS
-Remove the shaving unit, to prevent damages during repairs.
-While assembling the shaver the sides panels (item 17) have to be removed.
The side panels must be snapped into the body last.
TECHNICAL DATA |
|
|
|
|
Input voltage |
: 100 - 240 V, 50/60 Hz |
|||
Motor voltage |
: |
1.2 V |
|
|
|
||||
Cell |
: 1x AA NiMH or NiCd |
|||
Cell capacity |
: approx. 1000 mAH |
|||
Charging system |
: SOPS |
|||
Charge indicator |
: |
1x green LED |
||
Charging time |
: approx 1H |
|||
Charging current |
: 1200 mA Quick Charge |
|||
|
|
35 mA Trickle Charge |
||
Shaving heads |
: HQ4 - 4822 690 30468 |
|||
Comfort control |
: |
5 settings |
||
Screwdriver |
: |
4822 395 50263 |
||
MSH CODING
8851 488 00000 HQ 488
Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands © Copyright reserved Subject to modification
4822 729 22003 98/07
PCS 99 510
Loading...