Philips HD 4641/10 Service Manual

Comfort Kettle

HD4641/10

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

- This product meets the requirements regarding
interference suppression on radio and TV.

- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.

TECHNICAL INFORMATION

- Voltage : 220 - 240 V

- Frequency : 50 - 60 Hz

- Power consumption : 1850 - 2200 W

- Contents Kettle : 400 - 1700 cc

- Coloursetting : Translucent white,
Switch mineral green

- SAP coding : HD4641/10

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

- Handle housing removal

To remove the handle housing to reach to the inner
parts, detach with a simple screwdriver the two plastic
snap connections at the underside of the body.
Pull at the handle until the snap connections are loose.
Move the handle downwards to remove it from the body.

REPAIR INSTRUCTION

- Electrical circuit

When the appliance does not work, check the electrical
Circuit.

- De-scaling

Fill the kettle with water up to three-quarters of the
maximum level indication and press the on/off switch.

After the kettle has switched itself off, add white vinegar
(8% acetic acid) or an appropriate descaler up to the
maximum level indication.

Leave the solution in the kettle overnight.
Empty the kettle and rinse the inside thoroughly.
Repeat this procedure if there is still some scale left in the

kettle.

OPTIONAL (accessories)

- No specific issues.

L

E

N

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

04/03

PARTS LIST & EXPLODED VIEW

HD4641/10

4

5

6

3

1

2

Pos Service code Description

1

4213 258 94450

2

4213 247 05250

3

4213 263 30390

CS21 connector
Foot
Switch mineral green printed

Pos Service code Description

4

4213 258 94470

5

4213 247 05340

6

4213 258 93480

Cu/Ni element 220 V / 2.2 kW
Seal
Controller J10/X37 assy