Philips HC85P User Manual

HC Series

Explosion-Proof Emergency Power Unit

Page 1 of 2

12. 0"

(30.5 cm)

HC28N

15.0 "

(38.1 cm)

13.0"

(33.0 cm)

8.8"

(22.4 cm)

(8.9 cm)

3.5"

10.0"

(25.4 cm)

6.0"

(15.2 cm)

Features

Illumination: Illumination

is accomplished with

incandescent or compact

fluorescent F Series fixtures.

The F Series fixtures must be

ordered separately.

Housing: Copper-free cast

aluminum enclosure designed

to withstand the pressure

of explosions generated

by internal arc without

propagating them into the

hazardous atmosphere.

Suitable for use in Class I, Div.

1, Groups C & D, Zones 0, 1 &

2, Groups IIA, IIB + H

Class I, Div. 2, Groups C & D,

Zone 2, Groups IIA, IIB + H2 &

IIC; Class II, Div. 1, Groups E,

F & G; Class II, Div. 2, Groups

F & G; and Class III hazardous

location areas. Enclosure

and cover are constructed

separately. Cover is threaded

to allow easy attachment and

removal. Enclosure includes

three threaded openings for

3/4” rigid conduit — one for

AC input and two for mounting

hazardous fixtures.

Operating Temperature

Range: Pure Lead Units

65°F (19°C) to 85°F (30°C)

Nickel Cadmium Units

20°F (-7°C) to 95°F (35°C)

& IIC;

Electronics: 120/277 VAC

dual voltage input with

surge-protected, solid-state

circuitry provides for a reliable

charging system. HC85P uses

a temperature compensating

charger. Charging system is

complete with low voltage

disconnect, AC lockout,

brownout protection, AC

indicator lamp and test switch.

HC14N power pack operates

7 watt compact fluorescent

hazardous fixtures in both

AC and emergency modes.

HC28N, HC50N and HC85P

power units operate 6 and 12

volt incandescent hazardous

fixtures in emergency mode

only.

Electrical Specifications:

HC28N: (120 VAC) 0.15 A, 60

Hz, (120 VAC) 0.08 A, 60 Hz

HC50N, HC85P: (120 VAC)

0.33 A, 60 Hz, (120 VAC) 0.16

A, 60 Hz

HC14N: (120 VAC) 0.50 A, 60

Hz, (120 VAC) 0.25 A, 60 Hz

Job Information Type:

Job Name:

Cat. No.:

Notes:

Code Compliance

UL 924, 844, 1203 and 1604

listed. NFPA 101, NEC, BOCA,

OSHA and IBC illumination

standards.

Warranty

Three year full electronics

warranty. Five year full plus five

year prorated nickel cadmium

battery warranty. One year full

plus four year prorated pure

lead battery warranty.

Explosion-Proof Emergency Power Unit

Ordering Information

Series

HC = Hazardous Location Emergency Lighting Power Pack

Note

1) Compatible only with F Series f ixtures using 7 W compact fluorescent lamps. Will not oper ate incandescent lamps. Maximum remote mounting distance from the HC14N is 8 feet.

2) 15 minute delay.

Accessories (order as a separate item) OB3 = 3-Way Explosion Proof 3/4" Conduit Hub SEA = Swivel Elbow Arm for Use With Pendant Mount Fixture to Connect to OB3 or HC U nit EVLA12 = 12 V, 12 W Directional Head

Voltage/Batter y

6 Volt, Nickel Cadmium

14N = 14 W Power Pack, Compact Fluorescent L amp Operation, AC and E mergency Operation 28N = 28 W Power Pack, Incandescent Lamp Operation, Emergency Operation Only

6 Volt, Pure Lead 85P = 85 W Power Pack, Incandescent Lamp Oper ation , Emergency Operation Only

12 Volt, Nickel Cadmium 50N = 50 W Power Pack, Incandescent Lamp Operation, Emergency Operation Only

9.0"

(22.86 cm)

4.6"

(11.68 c m)

HC Series

Page 2 of 2

Factory Installed Options

EX = Special Input Transformer

(specify voltage & frequency)

T1 = 120 VAC Time Delay T2 = 277 VAC Time Delay

9.0"

(22.86 cm)

Sample Application

The sample application above consists of: (1) HC14N - 14 W power pack for exclusive use with compact fluorescent fixtures (2) SEA - elbow arms (1) FPHFP7 - 7 W compact fluorescent lamp fixture (operates in AC and emergency mode) (1) FPHFP7EFK - 7 W compact f luorescent lamp fixture with exit accessory (operates in AC and emergency mode)

Philips Lightolier e: lol.webmaster@philips.com t: (508) 679-8131 w: www.lightolier.com

HC Series May 4, 2012

Job Information Type: