GC9600 series
3
DE CALC
IMPORTANT: Perform descaling regularly for great steam and prolonged life.
IMPORTANTE: Elimine los depósitos de cal regularmente para mejorar a salida de vapor y prolongar la vida útil.
IMPORTANT : effectuez régulièrement un détartrage pour une vapeur de qualité et une durée de vie prolongée.
IMPORTANTE: eseguite regolarmente la procedura di decalcificazione per avere maggiore vapore e maggiore durata del ferro.
IMPORTANTE: execute a descalcificação regularmente para um óptimo vapor e uma duração prolongada.
ENGLISH 6
ESPAÑOL 14
FRANÇAIS 22
ITALIANO 30
PORTUGUÊS 38
GC9600 series
Introduction
This iron has been approved by The Woolmark Company Pty Ltd for the ironing of wool only products provided that the garments are ironed
according to the instructions on the garment label and those issued by the manufacturer of this iron. R1501. In United Kingdom, Eire, HongKong and
India, the Woolmark trademark is a Certification trademark.
Product overview (Fig. 3)
1Steam supply hose
2Iron platform
3First supply hose storage compartment
4Mains cord with plug
5ECO button with light
6 On/off button with safety auto off light and TURBO setting
7’Water tank empty’ light
8EASY DE-CALC light
9EASY DE-CALC knob
10Cord storage compartment
11Second supply hose storage compartment
12Detachable water tank
13Carry lock
14Carry lock release button
15Soleplate
16Steam trigger
17‘Iron ready’ light
18Filling hole
Important
Read the separate important information leaflet and the user manual carefully before you use the appliance. Save both documents for future reference.
ENGLISH 7
Using your appliance
Filling the water tank
Fill the water tank before every use and when the ‘water tank empty’ light flashes.
Do not add perfume, water from the tumble dryer, vinegar, starch, descaling agents, ironing aids, chemically descaled water or other chemicals, as they may cause water spitting, brown staining or damage to your appliance.
1Remove the water tank from the appliance and fill it with tap water up to the MAX indication.
Tip:Your appliance has been designed for use with tap water. If you live in an area with very hard water, scale builds up quickly. In this case it is recommended to use distilled water to prolong the life of your appliance.
2Put the water tank back into the appliance by sliding in the bottom part first.Then push the top part until it locks into place.
’Water tank empty’ light
When the water tank is almost empty, the ‘water tank empty’ light goes on. Fill the water tank and press the steam trigger to let the appliance heat up again.When the ‘iron ready’ light lights up continuously, you can continue steam ironing.
OptimalTempTechnology
The Optimal Temp Technology enables you to iron all types of ironable fabrics, in any order, without adjusting the iron temperature setting.
Fabrics with these symbols are ironable, for example linen, cotton, polyester, silk, wool, viscose and rayon.
Fabrics with this symbol are not ironable.These fabrics include synthetic fabrics such as Spandex or elastane, Spandex-mixed fabrics and polyolefins
(e.g. polypropylene), but also prints on garments.
8 ENGLISH
Ironing
1
2
3
,,
4
Place the steam generator on a stable and even surface.
Make sure that there is enough water in the water tank (see section ‘Filling the water tank’).
Put the mains plug in an earthed wall socket and press the on/off button to switch on the steam generator.The blue power-on light on the appliance and the ‘iron ready’ light start to flash to indicate that the appliance is heating up (this takes approx. 2 minutes).
When the appliance is ready for use, the ‘iron ready light’ and the power-on light stop flashing and light up continuously.Additionally you hear a short beep.
Press the carry lock release button to unlock the iron from the iron platform.
5 Press and hold the steam trigger to start ironing. Never direct steam at people.
Steam boost function
The steam boost function is designed to help tackle difficult creases.
-- Double press the steam trigger for a continuous shot of steam. It is not necessary to press and hold the steam trigger continuously when the steam boost function is activated.To stop the steam boost function, press the steam trigger once.
ENGLISH 9
Vertical ironing
Hot steam is emitted from the iron. Never attempt to remove creases from a garment that someone is wearing. Do not apply steam near your or someone else’s hand.
You can use the iron in vertical position to remove wrinkles from hanging fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch the garment slightly with the soleplate.
Putting down the iron during ironing
-- During ironing, you can place the iron either on the iron platform or horizontally on the ironing board.Thanks to the OptimalTemp technology, the soleplate will not damage the ironing board cover.
Energy saving
ECO mode
-- By using the ECO mode (reduced amount of steam), you can save energy without compromising on the ironing result.The green light is on.
-- You can deactivate the ECO mode by pressing the ECO button. The green light goes off.
Safety auto-off mode
-- To save energy, the appliance switches off automatically when it has not been used for 10 minutes.The auto-off light in the on/off button starts to flash.
-- To activate the appliance again, press the on/off button.The appliance then starts to heat up again.
Note:The appliance is not switched off completely when it is in safety auto-off mode.To switch off the appliance, press the on/off button.
10 ENGLISH
Turbo steam
For faster ironing and a higher amount of steam, you can use Turbo steam.
1Press and hold the on/off button for 2 seconds until the light turns white.
2To deactivateTurbo steam, press and hold the on/off button again for
2 seconds until the white light turns blue
Ironing tips
Minimising wrinkles while drying
Start wrinkle removal early in the drying process by spreading out your laundry properly after washing and by putting garments on hangers to make them dry naturally with fewer wrinkles.
Best practice shirt ironing
Start with the time-consuming parts like collar, cuff links and sleeves. Next, iron the bigger parts like front and back to prevent wrinkling the bigger parts when you are busy ironing the time-consuming parts. Collar: When you iron a collar, start on its underside and work from the outside (the pointy end) inwards.Turn over and repeat. Fold down the collar and press the edge for a more crisp finish.
Buttons: Iron on the reverse side of the buttons for more effective and faster ironing.
Cleaning and maintenance
To properly maintain your appliance, clean the iron and the appliance regularly.
1Clean the appliance with a moist cloth.To remove stubborn stains, you can use a small amount of washing-up liquid.
2To easily and effectively remove stains from the soleplate, switch on the appliance and let it heat up.When the appliance has heated up, move the iron over a moist cloth while you press the steam trigger.
Tip: Clean the soleplate regularly to ensure smooth gliding.
ENGLISH 11
IMPORTANT - DESCALING
It is very important to perform the descaling procedure as soon as the EASY DE-CALC light starts to flash and the appliance beeps continuously.
The EASY DE-CALC light flashes and the appliance beeps continuously after about a month or 10 ironing sessions to indicate that the appliance needs to be descaled. Perform the following descaling procedure before you continue ironing.
To avoid the risk of burns, unplug the appliance and let it cool down for at least two hours before you perform the descaling procedure.
1Remove the plug from the wall socket.
2Place the appliance on the edge of the tabletop.
3Hold a cup (with a capacity of at least 350ml) under the EASY DE-
CALC knob and turn the knob anticlockwise.
4Remove the EASY DE-CALC knob and let the water with scale particles flow into the cup.
5When no more water comes out of the appliance, reinsert the EASY
DE-CALC knob and turn it clockwise to fasten it.
12 ENGLISH
Storage
1Switch off the appliance and unplug it.
2Remove the water tank and empty it.
3Put the iron on the iron platform. Push the carry lock to lock the iron onto the platform.
4Fold the supply hose and mains cord. Put them in their respective storage compartments.
5 You can carry the appliance with one hand by the handle of the iron. Do not carry the appliance by holding the water tank release lever.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country.
Problem |
Possible cause |
Solution |
|
|
|
The ironing board |
Steam has condensed on the |
Replace the ironing board cover if the foam |
cover becomes |
ironing board cover after a long |
material has worn out.You can also add an |
wet or there are |
ironing session. |
extra layer of felt material under the ironing |
water droplets on |
|
board cover to prevent condensation on |
the garment during |
|
the ironing board.You can buy felt in a fabric |
ironing. |
|
shop. |
|
You have an ironing board cover |
Put an extra layer of felt material under |
|
that is not designed to cope |
the ironing board cover to prevent |
|
with the high steam rate of the |
condensation on the ironing board.You can |
|
appliance. |
buy felt in a fabric shop. |
Water droplets |
The steam that was still present |
Steam away from the garment for a few |
come out of the |
in the hose has cooled down and |
seconds. |
soleplate. |
condensed into water.This causes |
|
|
water droplets to come out of |
|
|
the soleplate. |
|
Steam and/or water come out from under the EASY DECALC knob.
The EASY DE-CALC knob is not tightened properly.
Switch off the appliance and let the appliance cool down for 2 hours. Unscrew the EASY DE-CALC knob and screw it back onto the appliance properly. Note: Some water may escape when you remove the knob.
The rubber sealing ring of the EASY DE-CALC knob is worn.
Contact an authorised Philips service centre for a new EASY DE-CALC knob.
|
|
ENGLISH 13 |
Problem |
Possible cause |
Solution |
|
|
|
Dirty water and |
Impurities or chemicals present |
Clean the soleplate with a damp cloth. |
impurities come out |
in the water have deposited in |
|
of the soleplate or |
the steam vents and/or on the |
|
the soleplate is dirty. |
soleplate. |
|
|
Too much scale and minerals have |
Descale the appliance regularly (see chapter |
|
accumulated inside the appliance. |
‘Important - DESCALING’). |
The iron leaves a |
The surface to be ironed was |
PerfectCare is safe on all garments.The |
shine or an imprint |
uneven, for instance because you |
shine or imprint is not permanent and will |
on the garment. |
were ironing over a seam or a |
come off if you wash the garment. Avoid |
|
fold in the garment. |
ironing over seams or folds or you can place |
|
|
a cotton cloth over the area to be ironed to |
|
|
avoid imprints at seams and folds. |
The appliance does |
There is not enough water in |
not produce any |
the water tank (the ‘water tank |
steam. |
empty’ light flashes). |
Fill the water tank (see chapter ‘Using your appliance’, section ‘Filling the water tank’).
|
The appliance is not hot enough |
|
to produce steam. |
|
You did not press the steam |
|
trigger. |
|
The water tank is not placed in |
|
the appliance properly. |
|
The appliance is not switched on. |
The appliance has |
The auto-off function is activated |
switched off.The |
automatically when the appliance |
light in the on/off |
has not been used for more than |
button flashes. |
10 minutes. |
The appliance |
Water is pumped into the boiler |
produces a pumping |
inside the appliance.This is |
sound. |
normal. |
Wait until the ‘iron ready’ light on the iron lights up continuously.
Press the steam trigger and keep it pressed while you iron.
Slide the water tank back into the appliance firmly (‘click’).
Insert the plug in the wall socket and press the on/off button to switch on the appliance.
Press the power on/off button to switch on the appliance again.
If the pumping sound continues nonstop, switch off the appliance and remove the plug from the wall socket. Contact an authorised Philips service centre.
Introducción
Esta plancha ha sido aprobada por The Woolmark Company Pty Ltd para el planchado de productos elaborados solo con lana, siempre que las prendas se planchen según las instrucciones de la etiqueta de la prenda y las proporcionadas por el fabricante de esta plancha. R1501. En el Reino Unido, Irlanda, Hong Kong y la India, la marca registrada Woolmark es una marca registrada certificada.
Descripción del producto (fig. 3)
1Manguera de vapor
2Plataforma de la plancha
3Primer compartimiento para guardar la manguera
4Cable de alimentación con clavija
5Botón ECO con piloto
6Botón de encendido/apagado con piloto de desconexión automática de seguridad y posición turbo
7Piloto de depósito de agua vacío
8Piloto EASY DE-CALC
9Rueda EASY DE-CALC
10Compartimento para el cable
11Segundo compartimento para guardar la manguera
12Depósito de agua extraíble
13Bloqueo para transporte
14Botón de liberación del bloqueo para transporte
15Suela
16Botón de vapor
17Piloto de “plancha lista”
18Abertura de llenado
Importante
Lea el folleto de información importante independiente y el manual de usuario con atención antes de utilizar el aparato. Guarde ambos documentos para consultarlos en el futuro.