Philips GC5010 Service Manual

Additive Steam Iron Perfective

GC5010

Philips Domestic Appliances and Personal Care

Service Manual

PRODUCT INFORMATION

Features

- Cartridge (concentrated smoothing liquid)

- Electronic spray

- Activation soleplate

- Drip stop

- Steam output: 15 g/min

- Extra steam boost: 40 g/min

- Extra long cord: 2.6m

o

ball swivel

- 360

- Water tank capacity: 200ml

- Automatic anti-calc

- Calc clean function

- Integrated cord winder and cord clip

- Carrying case

Safety Information

- This product meets the requirements regarding
interference suppression on radio and TV.

- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down as this moment.

TECHNICAL INFORMATION

Voltage : 220 - 240 V

Frequency : 50 - 60 Hz

Power consumption : 1650 - 1960 W

Dimension : 118mm (W) x 300mm (L) x 150mm (H)
(F-box)

Weight (product) : 1.5kg

Cartridge

Contains concentrated smoothing liquid that ensures
professional results on garments.

Electronic Spray

Effortlessly sprays a fine mist of diluted smoothing liquid evenly
over the fabric.

Activation Soleplate

Activates the heat-activated fibre moisturizer in the smoothing
liquid as the iron passes the sprayed area.

Drip Stop

Prevents stain on delicate fabrics caused by hot droplets leaking
from the soleplate at too low temperatures.

Automatic Anti-calc

Anti-calc pills in the iron together with calc clean function,
ensures long life of the iron.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

04/02

DIS-ASSEMBLY & RE-ASSEMBLY ADVICE IRON

DIS-ASSEMBLY ADVICE

GC5010

RE-ASSEMBLY ADVICE

BACKPLATE 1

FELT COVER 2

FELT SINK-1 3

FELT SINK-2 4

BALL SWIVEL 5

SWIVEL PLATFORM 6

CORDSET 7

Remove Screw A
Remove BACKPLATE 1
Remove FELT COVER 2
Remove Screw B (2x)
Remove Cord clamp

Remove felt cover by dislodging the
2 catches at the inner backplate.

HAND GRIP 8

ADDITIVE KNOB 9

SUB-INLAY ASSY 11

LAMP ASSY 12

LAMP HOLDER 13

MICROSWITCH ASSY 15

DOSING ASSY 16

DOOR SEAL 18

TANK SEAL 19

Remove Screw A
Remove BACKPLATE 1
Remove Screw B (2x)
Remove Cord clamp
Remove HAND GRIP 8
Remove ADDITIVE KNOB 9
Remove Screw C (2x)
Remove Screw D (2x)
Remove SUB-INLAY ASSY 11
Remove Screw E
Remove DOSING ASSY 16

Release hand grip catch.

Remove additive knob with sharp
object prying at the corner gap.

THERMOSTAT DIAL ASSY 20

RATTLE SPRING 21

PUMP ASSY 22

SELF CLEAN KNOB 23

TANK ASSY WELDED 25

THERMOSTAT BUSH 26

Remove Screw A
Remove BACKPLATE 1
Remove Screw B (2x)
Remove Cord clamp
Remove ADDITIVE KNOB 9
Remove Screw C (2x)
Remove Screw D (2x)
Remove Screw F (2x)
Remove TANK ASSY WELDED 25

COVER 27

DOSING SEAL 28

SOLEPLATE ASSY 29

Remove Screw A
Remove BACKPLATE 1
Remove Screw B (2x)
Remove Cord clamp
Remove Screw D (2x)
Remove Screw F (2x)
Remove TANK ASSY WELDED 25
Remove Screw G (3x)
Remove COVER 27

SUB-INLAY ASSY 11

Place SUB-INLAY ASSY 11
Place Screw C (2x)
Place Screw D (2x)
Dress Felt assy

Dressing of felt assy
(Hand grip top view)

BACKPLATE 1

FELT COVER 2

Place felt assy tip through hole in
BACKPLATE 1
Dress felt assy tip through FELT
SINK-2
Place FELT SINK-1 on FELT
COVER 2

Place FELT COVER 2
Place Screw A

Felt assy tip inserted through felt
sink-2.

REPAIR INSTRUCTIONS

For dis-assembly, you will need Torx
screwdrivers: T10 & T20

OPTIONAL (accessories)

- No specific issues

2-4