Philips GC 141 Service Manual

Dry Iron, Diva

GC 141

Philips Domestic Appliances and Personal Care

Service manual 4322 277 00481 is herewith cancelled.

Service Manual

PRODUCT INFORMATION

Features

- Colour white/blue

- Silverstone soleplate

- Full length button groove

- Integrated cord winder

TECHNICAL INFORMATION

Voltage/frequency : 100 V, 110-127 V, 220-240 V, 50-60 Hz

Power consumption : 900 W at 100 V

950-1100 W at 220-240 V

750-1000 W at 110-127 V

Soleplate

The Silverstone soleplate provides smooth glideability and ease of
clean properties with durable coating material.

This product meets the requirements regarding

interference suppression on radio and TV.

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

4322 277 00730
02/01

DISASSEMBLY ADVICE DRY IRON PARTS LIST DRY IRON

DIAL 1

RATTLE SPRING 5

INLAY 2

SWIVEL 3

Remove Screws A1 and A2

Description Consist ofPos Service code

Dial printed (Eng/Fre/Spa)

1.
Inlay

2.
Swivel

3.
Cord set 220-240 V / 950-1100 W

4.
Cord set 100 V / 900 W
Cord set 110 V / 750 W
Rattle spring

5.
Housing

6.
Thermostat bush

7.
Soleplate Cover

8.
Insulator ring

9.
Soleplate assy 220-240 V / 950-1100 W 103

10.
Soleplate assy 100 V / 900 W
Soleplate assy 110 V / 750 W

4239 021 05120
4239 026 06200
4239 026 06980
4239 000 07140
4239 000 07930
4239 000 07150
4239 014 52700
4239 026 07010
4239 026 06220
4239 015 33500
4239 015 70150
4239 021 05660
4239 021 06440
4239 021 05600

CORD SET 4

Remove Dial 1
Remove Rattle spring 5
Remove Screws A1 and A2
Remove Inlay 2
Remove Swivel 3
Remove Screws B1 and B2

HOUSING 6

THERMOSTAT BUSH 7

Remove Dial 1
Remove Rattle spring 5
Remove Screws A1 and A2
Remove Inlay 2
Remove Swivel 3
Remove Screws B1 and B2
Remove Cord set 4
Remove Screw C

SOLEPLATE COVER 8

INSULATOR

SUPPORT 9

Remove Dial 1
Remove Rattle spring 5
Remove Screws A1 and A2
Remove Inlay 2
Remove Swivel 3
Remove Screws B1 and B2
Remove Cord set 4
Remove Screw C
Remove Housing 6
Remove Thermostat bush 7
Remove Screw D
Remove Screws E1 and E2

NOTES :

After the product has been repaired, it should function properly and has to meet the safety
requirements and legal regulations as laid down and offi cially established at this moment.

ADJUSTMENTS AND CONTROLS

Thermostat, 103

The thermostat, fi tted to soleplate 10 has already been adjusted by the supplier and secured by
glue. To avoid disfunction of the iron, NEVER readjust the thermostat.

For standardisation reasons :

* Silverstone soleplate will be used for GC 147, GC 146 and GC 141.
* Aluminium soleplate will be used for GC 130, GC 135 and GC 137.
* GC 130 and GC 141 will not have the pilot lamp indication.

Parts, with numbers from 100 and higher cannot be ordered separately.