Philips FWM663X/77, FWM663/77, FWM663 User Manual

Register your product and get support at

www.philips.com/welcome

EN User manual

FWM663

7 Adjust volume level and sound

effect 48

Adjust volume level 48
Mute sound 48
Boost loudness 48
Select a preset sound effect 48
Enhance bass 48
Virtual surround 48
Customize sound for room acoustics 49

8 Listen to radio 49

Tune to a radio station 49
Program radio stations automatically 49
Program radio stations manually 50
Select a preset radio station 50

9 USB/SD record 50

Record to a USB/SD device 50
Schedule radio-to-USB/SD record 51

10 Other features 52

Set the alarm timer 52
Set the sleep timer 52
Listen to an external device 52
Delete from a USB/SD device 53
Copy les between SD and USB device 53
Karaoke 53

11 Product information 54

Specications 54
USB playability information 55
Supported MP3 disc formats 55
Maintenance 55

12 Troubleshooting 56

Content

1 Important 36

Safety 36
Notice 37

2 Your Mini Hi-Fi System 38

Introduction 38
What’s in the box 38

Overview of the main unit 39
Overview of the remote control 41

3 Connect 42

Connect FM antenna 42
Connect AM antenna 42
Connect speakers 43
Connect power 43

4 Get started 44

Prepare the remote control 44
Auto install radio stations 44
Set clock 44
Turn on 45

5 Play 45

Play disc 45
Play from a USB device 46
Play from an SD card 46
Play from an external device 47

6 Play options 47

Repeat and random play 47
Program tracks 47
Display play information 47

English

35EN

36

l Unplug this apparatus during lightning

storms or when unused for long periods
of time.

m Referallservicingtoqualiedservice

personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.

n Battery usage CAUTION – To prevent

battery leakage which may result in
bodily injury, property damage, or
damage to the unit:

Install all batteries correctly, + and - •
as marked on the unit.

Do not mix batteries (old and new •

or carbon and alkaline, etc.).

Remove batteries when the unit is •

not used for a long time.

o Apparatus shall not be exposed to

dripping or splashing.

p Do not place any sources of danger on

theapparatus(e.g.liquidlledobjects,

lighted candles).

q This product may contain lead and

mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.

r Where the MAINS plug or an appliance

coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.

1 Important

Safety

a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.

Install in accordance with the
manufacturer’s instructions.

h Do not install near any heat sources

such as radiators, heat registers, stoves,

orotherapparatus(includingampliers)

that produce heat.

i Protect the power cord from being

walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.

j Only use attachments/accessories

speciedbythemanufacturer.

k Use only with the cart, stand, tripod,

bracket,ortablespeciedbythe

manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.

EN

37

packaging materials, exhausted batteries and
old equipment.

Windows Media and the Windows logo are

trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.

This apparatus includes this label:

Warning

Never remove the casing of this apparatus. •
Never lubricate any par t of this apparatus. •
Never place this apparatus on other electrical •
equipment.

Keep this apparatus away from direct sunlight,

•

naked ames or heat.

Never look into the laser beam inside this

•

apparatus.

Ensure that you always have easy access to the

•

power cord, plug or adaptor to disconnect this
apparatus from the power.

Caution

Use of controls or adjustments or •
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.

Notice

Any changes or modications made to this

device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.

The making of unauthorized copies of
copy-protected material, including computer

programs, les, broadcasts and sound

recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.

Environmental information

All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of

English

EN

38

What’s in the box

Check and identify the contents of your
package:

Main unit x 1•

AC power cable x 1•
Power plug adaptor x 1•
Front speakers x 2•
Subwoofer x 1•
Remote control with 2 AAA batteries•
FM wire antenna x 1•

AM loop antenna x 1•
MP3 link cable x 1•
Quick start guide x 1•
User manual x 1•

2 Your Mini Hi-Fi

System

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.Philips.com/welcome.

Introduction

With this unit, you can enjoy audio from discs,
USB devices, iPod players, external devices, or
radio stations.
For your convenience, you can load up to three
discs at once.
To enrich sound, this unit offers you these
sound effects:

MAX sound for instant power boost•

Digital Sound Control (DSC)•
Dynamic Bass Boost (DBB)•
Incredible surround (IS)•
Virtual Ambience-based Control (VAC)•

The unit supports the following media formats:

EN

39

d Source selection keys

Select a source.•

e USB RECORD

Record to a USB device.•

f USB to SD

Copy audio les from a USB device •

to an SD card.

Overview of the main unit

a

b

d

c

e

f
g
h

j

k

k

i

l

n

m

m

p

q

p
q

o

x
w

u

s

t

v

r

z

{

|

}



€



~

y

a

Turn on the unit or switch to •

standby mode.

b DI SPLAY

Select display information.•

c MODE

Select repeat play or random play.•

English

EN

40

v

Start or pause play.•

w MAX SOUND

Turn on or off instant power boost •

for sound.

x VAC

Select an ambiance-based equalizer •
setting.

y IS

Turn on or off incredible surround.•

z DBB

Turn on or off dynamic bass •
enhancement.

{ SD DELETE

Delete audio les stored on an SD •

device.

| SD RECORD

Record to an SD card.•

} SD to USB

Copy audio les from an SD card to •

a USB device.

~ PROG

Program tracks.•
Program radio stations.•

 CLOCK

Set the clock/View the clock.•

€ LIGHT

Turn on or off the lighting effect.•

 Display panel

Show status.•

g USB DELETE

Delete audio les stored on a USB •

device.

h VOLUME

Adjust volume.•

i DSC

Select a preset sound equalizer •
setting.

j DISC 1/2/3

Select a disc.•

k

/

Skip to the previous/next track.•
Search within a track/disc/USB/SD •

device/DOCK.
Tune to a radio station.•
Adjust time.•

l

Stop play or erase a program.•

m ALBUM/PRESET+/-

Skip to the previous/next album.•
Select a preset radio station.•
Adjust time.•
Select 12 hour or 24 hour format.•

n OPEN/CLOSE

Open or close the disc •
compartment.

o Disc compartment door
p MIC VOL

Adjust microphone volume.•

q Microphone port

Jack for a microphone.•

r

Jack for a USB mass storage device. •

s MP3 LINK

Audio input jack (3.5mm) for an •
external audio device.

t SD card slot
u DISC CHANGE

Change a disc.•

EN

41

a

Turn on the unit or switch to •

standby mode.

b Source selection keys

Select a source.•

c SLEEP

Set the sleep timer.•

d MODE

Select repeat play or random play.•

e USB DELETE

Delete audio les stored on a USB •

device.

f MUTE

Mute volume.•

g USB RECORD

Record to a USB device.•

h

Start or pause play.•

i

/

Skip to the previous/next track.•

j USB to SD

Copy audio les from a USB device •

to an SD card.

k ALBUM/PRESET+/-

Skip to the previous/next album.•
Select a preset radio station.•
Adjust time.•
Select 12 hour or 24 hour format.•

l Numeric keypad

Select a track from a disc directly.•

m PROG

Program tracks.•
Program radio stations.•

n MAX SOUND

Turn on or off instant power boost •

for sound.

o DSC

Select a preset sound equalizer •
setting.

Overview of the remote
control

u

x

y

{
z

w

v

v

English

EN

42

3 Connect

Connect FM antenna

1

Connect the supplied FM antenna to the

FM jack on the back of the main unit.

Connect AM antenna

1

Assemble the AM loop antenna.

2 Connect the AM loop antenna to the AM

jack on the back of the main unit.

AM

p DBB

Turn on or off dynamic bass •
enhancement.

q VAC/IS

Select an ambiance-based equalizer •
setting.
Turn on or off incredible surround.•

r DI SPLAY

Select display information.•

s VOL +/-

Adjust volume.•

t

Stop play or erase a program.•

u SD to USB

Copy audio les from an SD card to •

a USB device.

v

/

Skip to the previous/next track.•
Search within a track/disc/USB/SD •

device/DOCK.
Tune to a radio station.•
Adjust time.•

w SD RECORD

Record to an SD card.•

x CLOCK

Set the clock/View the clock.•

y SD DELETE

Delete audio les stored on an SD •

device.

z LIGHT

Turn on or off the lighting effect.•

{ TIMER

Set the alarm timer.•

EN

43

Connect power

Caution

Risk of product damage! Ensure that the •
power supply voltage corresponds to the

voltage set on the voltage selector on the back
of the unit.

Ensure that the power supply socket used can

•

support at least 10A current loading.

Before connecting the AC power cord, ensure

•

that you have completed all other connections.

Note

The type plate is located on the back of the •
main unit.

1 Connect the AC power cable to:

the main unit.•
the wall socket.•

Connect speakers

Note

For optimal sound, use the supplied speakers •
only.

Connect only speakers with impedance that is

•

the same or higher than the supplied speakers.

Refer to the Specications section of this

manual.

A: Speakers; B: Subwoofer

Connect the speakers

1 Find “SPEAKERS” sockets on the main

unit.

2 Insert the black connector of the right

speaker wire to “R”, and the black
connector of the left speaker wire to “L”.

Connect the subwoofer

3 Insert the blue connector of the

subwoofer wire to “SUB WOOFER”

socket.

AA

B

English

EN

44

Note

If you are not going to use the remote control •
for a long time, remove the batteries.

Do not use old and new or different types of

•

batteries in combination.
Batteries contain chemical substances, so they

•

should be disposed of properly.

Auto install radio stations

When you connect power and no radio

stations are stored, the unit automatically begins
to store radio stations.

1 Connect the unit to the power supply.

[AUTO INSTALL - PRESS PLAY] (auto »
install - press the PLAY button) is
displayed.

2 Press on the main unit to start

installation.

[AUTO] (auto) is displayed. »
The unit automatically stores radio »

stations with sufcient signal strength.

When all the available radio stations »

are stored, the rst preset radio station

is broadcast automatically.

Set clock

1

In the standby mode, press CLOCK to

activate the clock setting mode.

The 12 hour or 24 hour format is »
displayed.

2 Press ALBUM/PRESET+/- repeatedly to

select 12 hour or 24 hour format.

3 Press CLOCK to conrm.

The clock digits are displayed and »
begin to blink.

4 PressALBUM/PRESET+/- to set the hour.
5 Press / to set the minute.
6 Press CLOCK to conrm.

4 Get started

Caution

Use of controls or adjustments or •
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.

Always follow the instructions in this chapter in

sequence.

If you contact Philips, you will be asked for the

model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Prepare the remote control

Note

Risk of explosion! Keep batteries away from •
heat, sunshine or re. Never discard batteries
in re.

To replace the remote control battery:

1 Open the battery compartment.
2 Insert two AAA batteries with correct

polarity (+/-) as indicated.

3 Close the battery compartment.

3

1

2

EN

45

5 Play

Play disc

1

Press CD 1/2/3 to select the disc source.

2 Press OPEN/CLOSE on the main unit to

open the disc compartment.

3 Load up to two discs on the disc trays,

with the printed side facing up.

To load the third disc, press • DISC
CHANGE on the main unit to rotate

to the disc tray.

4 Press OPEN/CLOSE on the main unit to

close the disc compartment.

Play starts automatically. »

To select a disc, press • DISC 1/2/3.
To pause/resume play, press •

.

To stop play, press •

.

To select another track, press •

/
or press a numeric button.
To select an album, press • ALBUM/
PRE SET+/-.

To search within a track, press and •

hold

/ , and then release to

resume normal play.

2

2

1

1

Tip

To view the clock during play, press • CLOCK.

Turn on

1

Press .

The unit switches to the last selected »
source.

Switch to standby

1 Press to switch the unit to standby

mode.

The backlight on the display panel »
turns off.

The clock (if set) appears on the »
display panel.

English

EN

46

Play from an SD card

Note

•

Ensure that the SD card contains playable
audio contents for supported formats. (see
‘USB playability information’ on page 29)

1 Insert the SD card into the SD card slot.
2 Press USB/SD to select the SD source.
3 Press ALBUM/PRESET+/- to select a

folder.

4 Press / to select an audio le.
5 Press to start play.

To pause/resume play, press •

.
To stop play, press •

.

To search within an audio le, press •

and hold

/ , then release to

resume normal play.

Play from a USB device

Note

•

Ensure that the USB device contains playable
audio contents for supported formats. (see
‘USB playability information’ on page 29)

1 Insert the USB plug of the device into the

socket.

2 Press USB/SD to select the USB source.
3 Press ALBUM/PRESET+/- to select a

folder.

4 Press / to select an audio le.
5 Press to start play.

To pause/resume play, press •

.

To stop play, press•

.

To search within an audio le, press •

and hold

/ , then release to

resume normal play.

•

EN

47

6 Play options

Repeat and random play

1

Press MODE repeatedly to select:

•

: the current track is played repeatedly.

•

: all tracks are played repeatedly.

•

: all tracks are played

randomly and repeatedly.

•

: all tracks are played randomly.

2 To return to normal play, press MODE

repeatedly until play mode is no longer
displayed.

Tip

Shufe play cannot be selected when you play •

programmed tracks.

Program tracks

You can program a maximum of 40 tracks.

1 At CD/USB mode, in the stop position,

press PROG to activate the program mode.

[PROG] (program) is displayed. »

2 For MP3/WMA tracks, press ALBUM/

PRE SET+/- to select an album.

3 Press / to select a track number, and

then press PROG to conrm.

4 Repeat steps 2 and 3 to select and store

all tracks to program.

5 Press to play the programmed tracks.

During play, [PROG] (program) is »
displayed.

To erase the program, in the stop •
position, press

.

Display play information

1

During play, press DISPL AY repeatedly to

select different play information.

Play from an external device

You can also listen to an external audio device
through this unit.

1 Press MP3-LINK to select the MP3 link

source.

2 Connect the supplied MP3 link cable to:

the • MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external •
device.

3 Start to play the device (see the device

user manual).

English

EN

48

Select a preset sound effect

The DSC (Digital Sound Control) enables you
to enjoy special sound effects.

1 During play, press DSC repeatedly to

select:

[JAZZ] (jazz)•
[POP] (pop)•
[TECHNO] (techno)•
[OPTIMAL] (optimal)•

Enhance bass

The best DBB (Dynamic Bass Enhancement)
setting is generated automatically for each
DSC selection. You can manually select the
DBB setting that best suits your listening
environment.

1 During play, press DBB repeatedly to

select:

DBB 1•
DBB 2•
DBB 3•
DBB off •

If DBB is activated, » DBB is displayed.

Virtual surround

You can enhance audio with a virtual surround

sound effect.

1 Press and hold VAC/IS to turn on or off

the incredible surround.

On the main unit, press • IS.

If the incredible surround is activated, »
[INC SURR] (incredible surround) is
displayed.

7 Adjust volume

level and sound
effect

Note

MAX sound and DSC (Digital Sound Control) •
cannot be activated at the same time.

Adjust volume level

Caution

For your hearing health and being •
consideration of other people, it is not
recommended to listen at high volume levels
for a long time.

1 During play, press VOL +/- to increase/

decrease the volume level.

Mute sound

1

During play, press MUTE to mute/unmute

sound.

Boost loudness

MAX gives an instant boost to the sound

power .

1 Press MAX to turn on or off the instant

power boost.

If MAX sound is activated, » MAX is
displayed.

EN

49

8 Listen to radio

Tune to a radio station

1

Press TUNER repeatedly to select FM or

AM.

2 Press and hold / for more than 2

seconds.

[SEARCH] (search) is displayed. »
The radio tunes to a station with »

strong reception automatically.

3 Repeat step 2 to tune to more stations.

To tune to a weak station, press •

/ repeatedly until you nd optimal
reception.

Program radio stations
automatically

You can program a maximum of 40 preset
radio stations.

1 In the tuner mode, press and hold PROG

for more than 2 seconds to activate
automatic program mode.

[AUTO] (auto) is displayed. »
All available stations are programmed »

in the order of waveband reception

strength.
The rst programmed radio station is »

broadcast automatically.

Customize sound for room
acoustics

1

During play, press VAC/IS repeatedly to

select a type of listening environment:

[HALL] (hall)•
[CONCERT] (concert)•
[CINEMA] (cinema)•

English

EN

50

9 USB/SD record

Audio CD tracks, MP3 les, radio, and audio from

external devices are recorded in .mp3 format, and

WMA les are recorded in .wma format.
The rst time you record to a USB/SD device,

a folder called ‘PHILIPS’ is automatically created
in the USB/SD device. Each time you record to

a USB/SD device, the recorded les are stored

in a subfolder in the ‘PHILIPS’ folder. Files and
subfolders are named numerically in the order

in which they are created.

Record to a USB/SD device

1

Connect a USB/SD device.

2 Prepare the source to record from.

Disc - Select the disc source and load •
a disc. You can select a track from

which a recording starts.

Radio - Tune to a radio station.•
MP3 LINK/AUX - Select the MP3 •
link/AUX source, and then connect
and star t to play an external device.
Karaoke - Singing during karaoke. •

3 Press USB RECORD or SD RECORD to

start recording.

For discs, press • USB RECORD or
SD RECORD repeatedly to select:

A [REC ONE] (record one): the rst/

current track is recorded.

B [REC ALL] (record all): all tracks/the

remaining tracks are recorded.

Disc play starts automatically from the »
beginning of the disc/the selected track,
and the recording starts.

To stop recording, press•

.

Note

If the USB/SD device does not have enough •
memory to store the audio les, a message

about a full memor y is displayed.

Program radio stations
manually

You can program a maximum of 40 preset
radio stations.

1 Tune to a radio station.
2 Press PROG to activate program mode.

[PROG] (program) blinks on the »
display.

3 Press ALBUM/PRESET+/- to allocate a

number to this radio station, and then
press PROG to conrm.

The preset number and the frequency »
of the preset station are displayed.

4 Repeat the previous steps to program

other stations.

Tip

To overwrite a programmed station, store •

another station in its place.

Select a preset radio station

1

In tuner mode, press ALBUM/PRESET+/-

to select a preset number.

Tip

Position the antenna as far as possible from •
TV, VCR, or other radiation source.
For optimal reception, fully extend and adjust

•

the position of the antenna.

EN

51

To deactivate or reactivate a record timer

1 In the standby mode, press TIMER

repeatedly.

If the timer is activated, »

is displayed.

If the timer is deactivated, »
disappears.

Schedule radio-to-USB/SD
record

Schedule radio recordings in advance and you
can listen to your favorite programs at your
convenience.

Note

A recording is activated only in the standby •
mode.
The maximum length of a recording is 12

•

hours.

1 Ensure that you set the clock correctly.
2 Plug a USB/SD device.
3 Tune to a radio station.
4 Press to switch to standby mode.
5 Press and hold TIMER for more than 2

seconds.

A prompt to select the source is »
displayed.

6 Press TUNER repeatedly to select FM or

AM.

7 Press USB RECORD or SD RECORD.

The start timer digits are displayed and »
begin to blink.

8 Press ALBUM/PRESET+/- to set the hour.
9 Press / to set the minute.
10 Press TIMER to conrm.

The end timer digits are displayed and »
begin to blink.

11 Press ALBUM/PRESET+/- to set the hour.
12 Press / to set the minute.
13 Press TIMER to conrm.

»

is displayed.

At the scheduled times, the recording »
begins and ends automatically.

When the recording ends, the unit »

switches to standby mode.

English

EN

52

Set the sleep timer

This unit can switch to standby automatically

after a set period.

1 When the unit is turned on, press SLEEP

repeatedly to select a set period (in
minutes).

When sleep timer is activated, »

is

displayed.

To deactivate sleep timer

1 Press SLEEP repeatedly until [OFF] (off)

is displayed.

When sleep timer is deactivated, »
disappears on the display.

Listen to an external device

You can listen to an external audio device
through this unit.

For audio players with headphone sockets

1 Press MP3 LINK/AUX repeatedly to

select the MP3 link source.

2 Connect the supplied MP3 link cable to:

the • MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external •
device.

3 Start to play the device (refer to the

device’s user manual).

For audio players with red/white audio output
sockets

1 Press MP3 LINK/AUX repeatedly to

select the AUX source.

2 Connect the audio cables (white/red

jacks, not supplied) to:

the • AUX IN jacks on the back of the
unit.
the AUDIO OUT jacks on an •
external device.

3 Start to play the device (refer to the

device’s user manual).

10 Other features

Set the alarm timer

This unit can be used as an alarm clock. A disc,
radio, or USB/SD device is activated to play at a
preset time.

Note

If you have set a record timer and an alarm •
timer, only the latest timer is activated.

1 Ensure that you have set the clock

correctly.

2 Press to switch to standby mode.
3 Press and hold TIMER for more than 2

seconds.

A prompt to select the source is »
displayed.

4 Press CD 1/2/3, or TUNER or USB/SD

to select a source.

5 Press TIMER to conrm.

The clock digits are displayed and »
begin to blink.

6 Press ALBUM/PRESET+/- to set the hour.
7 Press / to set the minute.
8 Press TIMER to conrm.

The timer is set and activated. »

To deactivate or reactivate an alarm timer

1 In the standby mode, press TIMER

repeatedly.

If the timer is activated, »

is displayed.

If the timer is deactivated, »
disappears.

Tip

In MP3 link or AUX mode, the alarm timer •
cannot be set.
If a disc or USB/SD source is selected but no

•

audio le can be played, radio is activated

automatically.

EN

53

Karaoke

You can connect a microphone and sing along

with a music source.

1 Turn MIC VOL to the minimum level.
2 Connect a microphone to the

microphone port on the unit.

3 Press CD 1/2/3, or TUNER, or USB, or

MP3 LINK/AUX to select the source, and

start play.

4 Sing through the microphone.

To adjust the volume of the source, •
press VOL +/-.
To adjust the volume of the •
microphone, turn MIC VOL.

Delete from a USB/SD device

1

During play from a USB/SD device, press

/ to select an audio le.

To delete an audio folder, in the stop •
position, press ALBUM/PRESET+/-
to select an audio folder.

2 Press USB DELETE or SD DELETE.

A conrmation message is displayed. »

3 While the message is displayed, press

USB DELETE or SD DELETE again to

conrm.

To cancel, press•

.

CopylesbetweenSDand

USB device

You can copy MP3 / WMA le between USB

and SD device.

1 Connect both USB and SD devices.
2 Press USB/SD to select the USB/SD

source.

3 Select an audio le.
4 Press USB to SD or SD to USB to start

copy.

You can press • USB to SD or SD to
USB repeatedly to select:

A [COPY ONE] (copy one): the rst/

current le is copied.

B [COPY ALL] (copy all): all les/the

remaining les are copied.

The track number and the percentage »
of copy progress are displayed.

Press •

to stop copy.

English

EN

54

Tuner

Tuning range FM: 87.5 - 108MHz;

AM: 531 - 1602kHz
(9KHz); 530 - 1700KHz
(10KHz)

Tuning grid 50KHz (FM);

9KHz/10KHz (AM)
Number of presets 40
FM 75ohm wire
AM loop antenna

Speakers

Speaker Impedance 3ohm
Woofer 2 x 8”

Tweeter 2 x 2”
Output power 2 x 250W

Dimensions
(W x H x D)

263 x 447 x 360 mm
Weight 7.151kg each

Subwoofer

Speaker impedance 8ohm
Speaker driver 10”
Output power 300W
Dimensions

(W x H x D)

337 x 491 x 360 mm
Weight 9.81 kg

11 Product

information

Note

Product information is subject to change •
without prior notice.

Specications

Amplier

Total output power 800W RMS
Frequency response 60 - 16kHz
Signal-to-noise ratio >67dB A (IEC)
Aux input 1500mV/2000mV

Disc

Laser type Semiconductor
Disc diameter 12cm/8cm
Support disc CD-DA, CD-R,

CD-RW, MP3-CD,

WMA-CD
Audio DAC 24Bits / 44.1kHz
Total harmonic

distortion

<1.5%

Frequency response 60Hz -16kHz (44.1kHz)
S/N ratio >75dBA

EN

55

File name in Unicode UTF8 •
(maximum length: 128 bytes)

Unsupported formats:

Empty albums: an empty album is an •
album that does not contain MP3/

WMA les, and is not be shown in

the display.

Unsupported le formats are •

skipped. For example, Word

documents (.doc) or MP3 les with

extension .dlf are ignored and not
played.

AAC, WAV, PCM audio les•
DRM protected WMA les (.wav, •

.m4a, .m4p, .mp4, .aac)

WMA les in Lossless format•

Supported MP3 disc formats

ISO9660, Joliet•
Maximum title number: 999 (depending •

on le name length)

Maximum album number: 99•
Supported sampling frequencies: 32 kHz, •

44.1kHz, 48 kHz
Supported Bit-rates: 32-320 (kbps), •
variable bit rates
ID3 tag v2.0 or later•
Directory nesting up to a maximum of 8 •
levels

Maintenance

Clean the cabinet

Use a soft cloth slightly moistened with •

a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.

Clean discs

When a disc becomes dir ty, clean it with •

a cleaning cloth. Wipe the disc from the
centre out.

General information

AC power 110 - 127/220 - 240V,

50/60Hz

Operation power

consumption

120W

Standby power

consumption

<10W

USB direct Version 2.0/1.1
Dimensions

Main Unit
(W x H x D)

265 x 359 x 353 mm

Weight

(without speakers)

6.5 kg

USB playability information

Compatible USB devices:

USB ash memory (USB 2.0 or USB •

1.1)

USB ash players (USB 2.0 or USB •

1.1)
memory cards (requires an additional •

card reader to work with this unit)

Supported formats:

USB or memory le format FAT12, •

FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps •
and variable bit rate
WMA v9 or earlier•
Directory nesting up to a maximum •
of 8 levels
Number of albums/ folders: •
maximum 99
Number of tracks/titles: maximum •
999
ID3 tag v2.0 or later•

English

EN

56

12 Troubleshooting

Warning

Never remove the casing of this apparatus. •

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this
apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact

Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.

No power

Ensure that the AC power plug of the •
unit is connected properly.
Ensure that there is power at the AC •
outlet.
To save power, the unit switches to •
standby automatically 15 minutes after
a play reaches the end and no control is
operated.

No sound or poor sound

Adjust the volume. •
Check that the speakers are connected •
correctly.
Check if the stripped speaker wires are •
clamped.

Left and right sound outputs reversed

Check the speaker connections and •
location.

No response from the unit

Disconnect and reconnect the AC power •
plug, then turn on the unit again.

Remote control does not work

Before you press any function button, •

rst select the correct source with the

remote control instead of the main unit.
Reduce the distance between the remote •
control and the unit.
Insert the batteries with their polarities •
(+/– signs) aligned as indicated.

Do not use solvents such as benzene, •
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.

Clean the disc lens

After prolonged use, dirt or dust may •
accumulate at the disc lens. To ensure
good play quality, clean the disc lens

with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.

EN

© 2010 Koninklijke Philips Electronics N.V.

All rights reserved.

FWM663_77_UM_V1.1